Study guide
10.2 Shear Walls, Braced Frames & Moment Frames
ARE 5.0 Project Planning & Design PPD
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview & Schematic Design Process
1.1 ARE 5.0 PPD Format, Scoring & Case Study Navigation 1.2 The Schematic Design Phase & Multi-Discipline Workflow 1.3 Regulatory Framework: Navigating Codes, Standards & Jurisdictions
2 Chapter 2: Site Analysis, Topography & Soil Conditions
2.1 Site Topography, Grading, Slopes & Cut/Fill Calculations 2.2 Geotechnical Reports, Soil Classification & Foundation Selection 2.3 Site Hydrology, Drainage & Stormwater Management Neighborhood Context, Historic Settings & Site Integration
3 Chapter 3: Climate, Microclimate & Solar Design
3.1 Solar Geometry, Sun Angles & Sun Path Diagrams 3.2 Microclimate Analysis, Prevailing Winds & Passive Ventilation 3.3 Passive Solar Heating & Thermal Mass Strategies
4 Chapter 4: Sustainable Principles & Energy Standards
4.1 Daylighting Metrics: Spatial Daylight Autonomy (sDA) & Annual Sun Exposure (ASE) 4.2 Building Energy Standards: ASHRAE 90.1, IECC & Energy Use Intensity (EUI) 4.3 High-Performance Frameworks: LEED v4.1, Net Zero & Embodied Carbon
5 Chapter 5: Zoning Regulations & Land Use Controls
5.1 Zoning Envelopes: Setbacks, Floor Area Ratio (FAR) & Lot Coverage 5.2 Parking Requirements, Access & Site Circulation Planning 5.3 Environmental Regulations: Wetlands, Flood Zones & Brownfields
6 Chapter 6: Building Code Fundamentals: Occupancy & Construction Types
6.1 IBC Occupancy Classifications & Group Characteristics 6.2 Mixed Occupancy Strategies: Nonseparated, Separated & Accessory 6.3 IBC Construction Types I Through V & Fire-Resistance Ratings 6.4 Allowable Building Height & Area Calculations (IBC Tables 504 & 506)
7 Chapter 7: Means of Egress & Fire Protection
7.1 Occupant Load Determination & Egress Sizing (IBC Chapter 10) 7.2 Egress Components: Common Path, Travel Distance & Exit Separation 7.3 Passive Fire Protection: Fire Walls, Barriers & Smoke Partitions 7.4 Active Fire Suppression: Sprinklers, Standpipes & Fire Alarms
8 Chapter 8: Accessibility & Universal Design
8.1 Accessible Routes, Curb Ramps & Parking Layouts (ADA / ICC A117.1) 8.2 Interior Accessibility: Doors, Maneuvering Clearances & Corridors 8.3 Accessible Plumbing Facilities: Restrooms, Grab Bars & Fixture Layouts
9 Chapter 9: Structural Systems: Wood, Steel, Concrete & Masonry
9.1 Structural Selection & Spanning Rules of Thumb 9.2 Steel Framing Systems: Beams, Girders & Open-Web Joists 9.3 Concrete Framing Systems: One-Way, Two-Way & Post-Tensioned Slabs 9.4 Wood Systems: Light-Frame, Heavy Timber & Mass Timber (CLT)
10 Chapter 10: Lateral Force Resisting Systems & Foundations
10.1 Lateral Load Paths: Wind vs. Seismic Forces 10.2 Shear Walls, Braced Frames & Moment Frames 10.3 Shallow vs. Deep Foundation Systems: Footings, Mats, Piles & Caissons
11 Chapter 11: Building Envelope: Physics, Assemblies & Moisture Control
11.1 Envelope Thermal Performance: U-Values, R-Values & Thermal Bridging 11.2 Moisture Management: Vapor Retarders, Air Barriers & Water Resistive Barriers 11.3 High-Performance Wall & Roof Assemblies: Rainscreens & Inverted Roofs 11.4 Fenestration & Glazing: U-Factor, SHGC, Condensation Resistance & VT Interior Materials, Durability & Program Performance
12 Chapter 12: Mechanical & HVAC Systems
12.1 HVAC System Types: All-Air, Air-Water, All-Water & VRF Systems 12.2 Central Plant Equipment: Chillers, Boilers, Cooling Towers & Geothermal 12.3 Ductwork Distribution, Air Handling & Plenum Space Requirements 12.4 Indoor Air Quality, Ventilation Rates & ASHRAE 62.1 Baselines
13 Chapter 13: Plumbing, Electrical & Life Safety Systems
13.1 Domestic Water Supply & Pressure Boosting Systems 13.2 Sanitary Drainage, Venting & Fixture Count Calculations 13.3 Electrical Service, Transformers, Switchgear & Backup Generators 13.4 Lighting Design, Controls & Lighting Power Density (LPD) Limits
14 Chapter 14: Specialized Building Systems & Vertical Circulation
14.1 Architectural Acoustics: STC, NRC, RT60 & Noise Criteria (NC) 14.2 Elevator Systems: Traction vs. Hydraulic, Core Layout & Sizing 14.3 Building Telecommunications, Security & Building Automation Systems (BAS)
15 Chapter 15: Systems Integration & Coordination
15.1 Floor-to-Floor Height & Plenum Coordination (Structure + MEP + Architecture) 15.2 Structural Grid Planning & Spatial Adjacencies 15.3 Building Massing, Orientation & Envelope Integration 15.4 Case Study Strategy: Synthesizing Drawings, Code Sheets & Schedules
16 Chapter 16: Project Costs, Budgeting & Life-Cycle Analysis
16.1 Schematic Estimating Techniques: Area, Volume & Parametric Costs 16.2 Project Budgets: Contingencies, Overhead, Profit & Escalation 16.3 Life-Cycle Cost Analysis (LCCA) & Value Engineering
10.2 Shear Walls, Braced Frames & Moment Frames
Key Takeaways Explain This Topic AI
Walls, braced frames and moment frames trade stiffness, ductility, openings, drift and cost.
Assign seismic factors to the exact complete system and detailing category.
For an ideal rectangular base, full compression requires eccentricity within the L/6 kern; tipping is a different check.
Use the appropriate diaphragm model and design chords, collectors, connections and foundations for the actual force path.
Last updated: October 2026
10.2 Shear Walls, Braced Frames & Moment Frames
To resist horizontal wind and seismic forces, structural engineers incorporate one or more of three standardized vertical lateral force resisting systems (LFRS):
Shear Walls : Vertical planar elements acting as cantilevers resisting in-plane shear and bending moments.
Braced Frames : Triangulated vertical trusses resisting lateral shears through axial tension and compression in diagonal members.
Moment-Resisting Frames (MRF) : Rigid frames resisting lateral shears through flexural bending and shear in rigidly joined beams and columns.
Each system embodies distinct structural trade-offs between lateral stiffness (drift control), seismic ductility ( R R R -value), spatial planning flexibility, and construction cost.
Shear Wall Systems: Mechanics, Materials & Overturning
Shear walls function as deep vertical cantilever beams fixed at the foundation. Under lateral loading, the wall resists:
In-Plane Direct Shear : Resisted by the web of the wall (concrete matrix, masonry grouted cores, or wood structural panel sheathing).
Overturning Moment ( M O T = V ⋅ h M_{OT} = V \cdot h M OT = V ⋅ h ) : Induces compressive crushing stresses at the toe and tensile uplift forces at the heel.
Overturning Equilibrium & Anchoring
The dead weight of the wall plus tributary gravity dead loads provide an intrinsic restoring moment:
M r e s = W d e a d × L 2 M_{res} = W_{dead} \times \frac{L}{2} M res = W d e a d × 2 L
Full contact and overturning resistance are separate. For the ideal rectangular base, e = M / N ≤ L / 6 e=M/N\le L/6 e = M / N ≤ L /6 keeps linear bearing pressure nonnegative. The restoring moment about an edge is N L / 2 NL/2 N L /2 , a different limit. An engineer must determine partial contact, anchors, foundation stability and boundary forces; simply exceeding one restoring-moment comparison does not describe the whole design.
At the compression toe, extreme flexural compressive stresses develop, requiring confined boundary elements (closely spaced spiral or hoop rebar ties enclosing vertical reinforcing steel) to prevent concrete crushing and rebar buckling.
Material Variants
Reinforced-concrete walls can provide substantial stiffness and fit cores or demising lines. The R value depends on the complete system; special bearing-wall and building-frame configurations do not share every factor.
Reinforced Concrete Masonry (CMU) : Fully grouted hollow concrete blocks with vertical and horizontal rebar; R = 5.0 R = 5.0 R = 5.0 (Special Reinforced Masonry Shear Walls). Economical for schools, big-box retail, and warehouses.
Wood Structural Panel (WSP) Shear Walls : Wood-framed stud walls sheeted with nailed structural plywood or oriented strand board (OSB); R = 6.5 R = 6.5 R = 6.5 . Dominant in Type V-A and Type III-A podium residential construction.
Architectural Impacts
Shear walls provide unmatched lateral stiffness and minimal lateral drift ( Δ \Delta Δ ). However, their opaque, solid nature forms permanent architectural barriers. They restrict open floor plans, limit natural daylighting, and constrain exterior window layouts to small, carefully reinforced punch openings.
Braced Frame Systems: Concentric (CBF) vs. Eccentric (EBF)
Braced frames utilize structural steel diagonal members to form vertical triangulated trusses, converting horizontal shears into axial tension and compression forces.
Concentric Braced Frames (CBF)
In a concentric frame, the centerlines of the beams, columns, and diagonal braces intersect at a single common point (work point).
Configurations : X-Bracing, Single Diagonal, Chevron (Inverted-V), and V-Bracing.
The Chevron Bracing Problem : Under severe cyclic earthquake shaking, the compression diagonal buckles elastically, losing up to 70% of its compressive capacity, while the opposing tension diagonal reaches full tensile yield. This generates a massive unbalanced vertical downward force on the floor beam at the brace intersection, which can cause catastrophic beam collapse unless the beam is specifically designed to resist this unbalanced load.
Special Concentrically Braced Frames (SCBF) : Assigned R = 6.0 R = 6.0 R = 6.0 . Braces and gusset plates are engineered to endure post-buckling cyclic plastic deformation without brittle connection fractures.
Eccentric Braced Frames (EBF)
In an eccentric braced frame, brace centerlines do not intersect at a common node. Instead, the brace ends are intentionally separated by a specific horizontal distance along the floor beam, creating a dedicated shear link (or flexural link).
Structural Fuse Behavior : Under severe seismic shaking, the link segment yields plastically in shear or flexure, absorbing and dissipating massive amounts of earthquake energy while all other members (columns, diagonal braces, and outer beam segments) remain completely elastic.
Performance : Delivers the high lateral stiffness of a braced frame combined with the superior seismic ductility of a moment frame ( R = 8.0 R = 8.0 R = 8.0 ).
Architectural Flexibility : The eccentric geometry creates open spaces beneath the link, allowing central corridors, double doors, and continuous window bands to pass through braced bays.
Moment-Resisting Frame Systems (MRF)
Moment-resisting frames resist lateral wind and seismic forces entirely through the flexural bending resistance of rigidly connected beams and columns, without diagonal bracing or solid shear walls.
ASCE 7-16 Classifications
Ordinary frames have limited ductile detailing and system-specific seismic category and height restrictions. Check the exact material/system row before treating them as a feasible alternative.
Intermediate Moment Frames (IMF) : R = 4.5 R = 4.5 R = 4.5 . Moderate ductility detailing; permitted in moderate seismic categories.
Special Moment Frames (SMF) : R = 8.0 R = 8.0 R = 8.0 . Highest seismic ductility. Requires stringent AISC 341 detailing:
Strong-Column / Weak-Beam Principle : ∑ M p c ∗ / ∑ M p b ∗ > 1.0 \sum M_{pc}^* / \sum M_{pb}^* > 1.0 ∑ M p c ∗ / ∑ M p b ∗ > 1.0 . Columns must be stronger than beams so that plastic hinges form in horizontal beams rather than vertical columns, preventing sudden multi-story soft-story collapse.
Pre-Qualified Connections : Beam-to-column connections must be pre-qualified by testing. Popular designs include the Reduced Beam Section (RBS / "dog bone") , where beam flanges are trimmed slightly away from the column face to force plastic yielding into the sacrificial beam span, protecting the critical complete-joint-penetration (CJP) column welds.
Architectural Impacts
Moment frames provide maximum architectural design freedom: completely open interior spaces, column-free open plans, and 100% transparent exterior perimeter curtain walls. However, MRFs have the lowest lateral stiffness of any LFRS. Under lateral loading, they undergo significant story drift ( Δ \Delta Δ ). To satisfy code lateral drift limits (typically Δ ≤ 0.020 h s x \Delta \le 0.020 \, h_{sx} Δ ≤ 0.020 h s x ) and prevent secondary P P P - Δ \Delta Δ stability failures, member depths and weights must be significantly oversized beyond raw stress requirements, resulting in deep beams that consume valuable ceiling plenum space.
Response Modification Coefficient ( R R R -Value) & System Properties
Select R, Cd and overstrength from the exact code-defined system, including whether walls form a bearing-wall or building-frame system. Steel SCBF and SMF, special reinforced-concrete or masonry walls, and wood-panel walls have different permitted categories, heights and detailing. The qualitative choice balances stiffness, drift, ductility, openings, connections, foundations and cost; a generic wall material is not enough to assign a factor.
Structural spans, member-depth ratios and preliminary capacities in this section are design-screening assumptions, not completed structural designs. Check loads, serviceability, fire rating, vibration, connections, bracing, durability and constructability with the engineer. IBC 2021 references ASCE 7-16; an exam-provided reference or a locally adopted edition may differ. Never transfer a numerical limit between editions or structural systems without checking its scope.
Response modification factors belong to complete code-defined structural systems and detailing categories. Reinforced-concrete special shear walls may have different R values in bearing-wall and building-frame systems. A higher R reduces the idealized design force only within an otherwise permitted system and does not guarantee smaller total cost or eliminate drift and irregularities. Wood diaphragms are not automatically classified flexible solely because they contain wood; verify the code classification before using tributary-area distribution.
Loading diagram... Lateral Force Resisting System (LFRS) Selection Matrix
Horizontal Diaphragms, Chords & Collectors (Drag Struts)
Horizontal floor and roof assemblies act as deep structural plate girders spanning horizontally between the vertical LFRS elements:
The floor deck or slab functions as the web of the girder, resisting in-plane shear forces.
The perimeter boundary edges function as the flanges of the girder, resisting flexural tension and compression.
Rigid vs. Flexible Diaphragms
Rigid Diaphragms (Cast-in-place concrete slabs, concrete topping on corrugated metal deck): In-plane diaphragm deflection is small relative to the drift of vertical walls. Lateral forces are distributed to vertical LFRS elements in proportion to their relative stiffness ( k i / ∑ k k_i / \sum k k i / ∑ k ). A stiff shear wall will attract the vast majority of lateral shear, while flexible moment frames receive very little. Rigid diaphragms transmit dynamic torsional moments when eccentricity exists between the center of mass and center of rigidity.
Flexible-diaphragm idealization distributes force primarily by tributary area when the code permits that model. It does not mean every wood floor is flexible or that every eccentricity effect can be ignored. Evaluate openings, collectors, continuity, wall flexibility and the applicable code requirements.
Diaphragm Chords
As the diaphragm bends under lateral loads, one edge develops intense tensile stress while the opposite edge develops compressive stress:
T = C = M d i a p h r a g m d T = C = \frac{M_{diaphragm}}{d} T = C = d M d ia p h r a g m
Continuous steel tension ties, perimeter slab reinforcement bars, or structural steel edge angles must be detailed as unbroken chords around the entire building perimeter.
Check overturning and soil contact separately. For a rectangular base under axial load N N N and moment M M M , the ideal elastic stress is N / A ± M / S N/A\pm M/S N / A ± M / S . Full compression requires the resultant to remain within the kern: e = M / N ≤ L / 6 e=M/N\le L/6 e = M / N ≤ L /6 for the stated uniaxial rectangular case. A restoring moment N L / 2 NL/2 N L /2 concerns tipping about an edge; it is not the threshold for first loss of compression. Partial contact, anchors and uplift require an engineered analysis.
- Worked Scenario: LFRS Selection for a Mixed-Use Building
- Scenario
A 5-story mixed-use building in Seismic Design Category D has ground-floor retail requiring floor-to-ceiling perimeter storefront glazing on three sides, with 4 stories of multi-family apartments above requiring compact party-wall layouts.
Evaluation & Structural Resolution
Upper Levels (Floors 2 to 5) : Residential demising walls between units provide abundant vertical planes. Specifying wood structural panel or concrete shear walls at upper levels offers maximum stiffness, superior acoustic isolation between tenants, and economical construction.
Ground Floor Dilemma : Continuing shear walls down to grade on the three street-facing retail frontages would block storefront glass and create unmarketable retail space. However, stopping the shear walls at the second floor would create a catastrophic soft-story and weak-story discontinuity (Vertical Irregularity Type 1 and Type 4).
Structural Solution : The design team engineers a continuous central concrete core enclosing the elevator and fire stair shafts that extends unbroken from the foundation through the roof, providing core lateral shear resistance. On the retail perimeter, Special Moment Frames (SMF, R = 8.0 R = 8.0 R = 8.0 ) or Eccentric Braced Frames (EBF, R = 8.0 R = 8.0 R = 8.0 ) are integrated around storefront openings, coordinated with horizontal collectors and transfer slabs at Level 2, preserving retail transparency while addressing the discontinuity through an engineered load path and stiffness/drift checks.