Study guide

9.4 Soil Mechanics, Geotechnical Investigation & Foundation Selection

Architect Registration Examination ARE 5.0

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: ARE 5.0 Structure, Delivery & Scoring

1.1 The Six Divisions: Items, Durations, Sections & Objectives 1.2 Eligibility, PSI Delivery, Fees, Scheduling & Rescheduling 1.3 Cut Scores, Score Reports, Provisional Feedback & Retakes

2 Chapter 2: Licensure Path, Item Types & Test-Day Strategy

2.1 Education Standard, AXP Hours, Settings & Reporting Rules 2.2 The NCARB Record, Score Validity Policy & Reciprocity 2.3 Item Types, Case Studies, Exam Tools, Breaks & Pacing

3 Chapter 3: Practice Management — Firm Resources, Conduct & the Work Environment

3.1 Assessing Practice Resources: Staffing, Development & Capital Investment 3.2 Regulating the Work Environment: FLSA, Antidiscrimination Law, OSHA & ADA Title III 3.3 Ethical Standards, the NCARB Rules of Conduct & the Standard of Care 3.4 Business Structures, Firm Ownership Rules & Practice-Wide Methodologies

4 Chapter 4: Practice Management — Firm Finances & Financial Health

4.1 Utilization, Overhead, Break-Even & Net Multiplier 4.2 Liquidity, Solvency & Reading Firm Financials Strategically 4.3 Accrual vs. Cash Accounting & the Architectural Balance Sheet 4.4 The Income Statement, Net Operating Revenue & Cash Flow Management

5 Chapter 5: Practice Management — Risk, Insurance & Business Development

5.1 Risk Management & the Firm’s Insurance Portfolio 5.2 Contractual Risk Allocation, Intellectual Property & Dispute Resolution 5.3 Client Requests, Compensation Methods, Project Delivery & Project Risk

6 Chapter 6: Project Management — Team, Resources & Consultants

6.1 Assembling the Project Team: Roles, Authority & Selection Criteria 6.2 Allocating & Managing Project Resources: Hours, Rates & Leveling 6.3 Consultant Selection, Qualifications-Based Selection & Scope Boundaries 6.4 AIA C401: Flow-Through, Consultant Standard of Care, Insurance & Payment

7 Chapter 7: Project Management — Work Planning, Scheduling & Budget Control

7.1 The Project Work Plan & Phase Fee Allocation 7.2 Work Breakdown Structures, Scheduling Methods & Dependency Logic 7.3 Critical Path Calculations, Float & Schedule Compression 7.4 Project Communication: Paths, Instruments, Meetings & the Record 7.5 Monitoring the Project Budget with Earned Value Management 7.6 Scope Creep, Additional Services & Written Authorization

8 Chapter 8: Project Management — Contracts, Approvals & Quality Control

8.1 AIA B101: Initial Information, Standard of Care & Basic Services 8.2 B101: Owner Duties, Cost of the Work, Copyright, Termination & Compensation 8.3 The Owner-Contractor Agreement & A201 Contractor Responsibilities 8.4 A201: Architect Administration, Changes, Claims & Separate Contractors 8.5 Regulatory Compliance, Authorities Having Jurisdiction & Project Approvals 8.6 Documenting a Project for the Specified Delivery Method 8.7 Quality Assurance, Quality Control, Constructability & the Record

9 Chapter 9: Programming & Analysis — Site & Environmental Conditions

9.1 Climate Classification, Solar Geometry & Passive Site Opportunities 9.2 Microclimate, Wind, Topography, Grading & Site Hydrology 9.3 Environmental Due Diligence: CERCLA Liability & Phase I / Phase II Assessments 9.4 Soil Mechanics, Geotechnical Investigation & Foundation Selection 9.5 Vehicular Circulation, Access Management, Parking & Emergency Access

10 Chapter 10: Programming & Analysis — Zoning, Codes & Site Infrastructure

10.1 Pedestrian Circulation, Site Utilities & Contextual Constraints 10.2 Zoning Authority, Euclidean and Form-Based Codes & Bulk Standards 10.3 Non-Conforming Uses, Variances, Easements & Parking Feasibility 10.4 IBC Occupancy Classification, Mixed Occupancy & Incidental Uses 10.5 IBC Construction Types, Fire-Resistance Ratings & Compartmentation

11 Chapter 11: Programming & Analysis — Building Programming & Feasibility

11.1 Programming Methodology, Net vs. Gross Area & Building Efficiency 11.2 Adjacency Matrices, Bubble Diagrams, Blocking & Stacking 11.3 Evaluating an Existing Building Against a Program 11.4 Reviewing Project Budget & Schedule Feasibility Against Scope 11.5 Identifying Building & Structural System Alternatives at Programming

12 Chapter 12: Project Planning & Design — Siting, Configuration, Codes & Life Safety

12.1 Building Siting, Neighborhood Context, Zoning Application & Configuration 12.2 IBC Allowable Area: Tabular Area, Frontage & Sprinkler Increases 12.3 Building Height, Story Limits, Mixed Occupancy & Unlimited Area Buildings 12.4 Means of Egress Components & Occupant Load Calculation 12.5 Exit Count, Remoteness, Egress Capacity, Travel Distance & Dead Ends 12.6 Accessible Routes, Slopes, Protruding Objects & Ramp Design 12.7 Door Clearances, Operating Hardware & Accessible Toilet Room Geometry

13 Chapter 13: Project Planning & Design — Structural & Mechanical Systems

13.1 Selecting Structural Systems: Steel, Concrete, Wood & Masonry 13.2 Lateral Force-Resisting Systems, Wind Loads & Seismic Design 13.3 Thermal Comfort, ASHRAE Standard 55 & Psychrometrics 13.4 HVAC System Typologies, Spatial Allocation & Central Plant Equipment 13.5 Potable Water Supply, Drainage, Waste & Vent Systems 13.6 Electrical Distribution, Emergency Power, Lighting & Daylighting 13.7 Fire Suppression, Standpipes, Conveying, Security & Communications

14 Chapter 14: Project Planning & Design — Envelope, Materials & Cost

14.1 Envelope Thermodynamics, Heat Transfer & Fenestration Performance 14.2 Thermal Bridging, Continuous Insulation & Thermal Mass 14.3 Passive Solar Heating, Natural Ventilation & Daylighting Architecture 14.4 Material Selection Criteria, Fire Performance & Vapor Permeance 14.5 Life Cycle Assessment, Embodied Carbon & Material Transparency 14.6 Galvanic Compatibility, Thermal Movement & Masonry Durability 14.7 Cost Estimating by Phase & Contingency Planning 14.8 Life-Cycle Cost Analysis, Present Value & Value Engineering

15 Chapter 15: Project Development & Documentation — Roofing, Waterproofing & Wall Assemblies

15.1 Low-Slope Roofing Systems, Membranes & Drainage Geometry 15.2 Flashing, Parapets, Copings & Roof Penetration Detailing 15.3 Steep-Slope Roofing & Below-Grade Waterproofing 15.4 Enclosure Control Layers & Rain Screen Cladding Systems 15.5 Vapor Retarders, Permeance Classes & Dew Point Control

16 Chapter 16: Project Development & Documentation — Connections, Coordination & Interiors

16.1 Structural Steel Connections & Base Plate Detailing 16.2 Concrete Reinforcing, Cover & Building Movement Joints 16.3 Sizing Structural, Mechanical, Electrical & Plumbing Components 16.4 Ceiling Plenum Coordination, Clash Detection & Level of Development 16.5 Vertical Chases, Shaft Walls, Through-Penetration Firestopping & Rated Joints 16.6 Interior Partition Framing, Head-of-Wall Details & Rated Gypsum Assemblies 16.7 Sound Isolation, STC, NRC & Reverberation Time 16.8 Door and Frame Construction & Fire Door Assemblies Under NFPA 80 16.9 Hardware Functions, Fire-Protection vs. Fire-Resistance Glazing

17 Chapter 17: Project Development & Documentation — Drawings, Specifications & Estimates

17.1 The National CAD Standard, Sheet Modules & Title Blocks 17.2 Drawing Cross-Referencing, Coordination & Revision Control 17.3 Documenting Site Features: Survey, Civil, Grading, Utilities & Landscape 17.4 The Project Manual & CSI MasterFormat Divisions 17.5 Section Numbering & the CSI Three-Part SectionFormat 17.6 Specification Methods & Document Precedence 17.7 Quantity Takeoff Estimating, General Conditions, Overhead & Alternates

18 Chapter 18: Construction & Evaluation — Procurement, Bidding & Preconstruction

18.1 Procurement Methods & AIA A701 Instructions to Bidders 18.2 Addenda Mechanics & Surety Bonds 18.3 The Preconstruction Conference & Administrative Protocols 18.4 Submittal Schedules, Long-Lead Items, Permits & Special Inspections 18.5 Bid Opening, Bidder Qualification & Discrepancy Rules 18.6 Alternates, Allowances, Unit Prices & Contract Award

19 Chapter 19: Construction & Evaluation — Observation & Contract Administration

19.1 The Architect’s Site Observation Role & the Means and Methods Firewall 19.2 Rejecting Non-Conforming Work, Special Inspections & Field Reports 19.3 Submittal Workflow, Review Responsibility & Action Stamps 19.4 Delegated Design, Design-Assist & Deferred Submittals 19.5 Requests for Information & Architect’s Supplemental Instructions 19.6 Change Orders, Construction Change Directives & Instrument Comparison

20 Chapter 20: Construction & Evaluation — Payment, Closeout & Evaluation

20.1 The Schedule of Values & the Application and Certificate for Payment 20.2 Stored Materials, Retainage, Certification Duties & Withholding 20.3 Substantial Completion & the Punch List Protocol 20.4 The Certificate of Substantial Completion & Its Legal Consequences 20.5 Final Completion, Final Payment & the Closeout Package 20.6 Warranty Administration, the Eleven-Month Walk-Through & Post-Occupancy Evaluation

9.4 Soil Mechanics, Geotechnical Investigation & Foundation Selection

Key Takeaways Explain This Topic AI

The Unified Soil Classification System under ASTM D2487 groups soils as gravels, sands, silts, clays, and organic soils by grain size and plasticity.

Well-graded granular soils generally provide the highest bearing capacity and the most predictable settlement; expansive clays and organic soils are the most problematic.

Standard penetration test blow counts indicate relative density in granular soils and consistency in cohesive soils, and they appear directly in boring logs.

Shallow spread and mat foundations are used where competent bearing exists near grade; deep piles and caissons transfer load past unsuitable strata.

The geotechnical report is a design input the owner is obligated to furnish under AIA B101 Article 5, not something the architect generates.

Last updated: September 2026

Soil Mechanics & Geotechnical Engineering

A building's structural stability depends entirely upon the structural integrity of the soil supporting its foundation. Geotechnical site investigations determine whether soils possess adequate bearing capacity to resist shear failure and control foundation settlement.

Unified Soil Classification System (USCS - ASTM D2487)

The USCS categorizes soils based on particle grain size distribution and plasticity. Soil particles passing through a 3-inch sieve are separated into coarse-grained, fine-grained, and organic soils using a standard No. 200 sieve (0.075 mm mesh opening) :

Soil Category Major Group USCS Symbol Typical Description Engineering Properties & Suitability

Coarse-Grained ; (>50% retained on No. 200 sieve) Gravel (G) GW ; GP ; GM ; GC Well-graded gravel; Poorly graded gravel; Silty gravel; Clayey gravel High bearing capacity (3,000–10,000+ psf); excellent shear strength; high permeability; rapid drainage; non-frost-susceptible (when clean); excellent foundation support

Sand (S) SW ; SP ; SM ; SC Well-graded sand; Poorly graded sand; Silty sand; Clayey sand Good-to-high bearing capacity (2,000–4,000 psf); moderate-to-high permeability; low compressibility; well-graded sands offer excellent structural backfill

Fine-Grained ; (>50% passes No. 200 sieve) Silt (M) ML ; MH Inorganic silt (low plasticity); Elastic silt (high plasticity) Low bearing capacity (1,500–2,000 psf); highly frost-susceptible; poor drainage; capillary action draws moisture; unstable when saturated

Clay (C) CL ; CH Lean clay (low plasticity); Fat clay (high plasticity) Cohesive; virtually impermeable; highly compressible; prone to long-term consolidation settlement; CH clays exhibit severe shrink-swell hazards

Highly Organic Peat (Pt) PT Peat, muck, swamp humus Extremely compressible; unstable; decomposition causes structural collapse; unsuitable for foundation support ; must be completely over-excavated

Grading terminology: Well-graded soils contain a balanced distribution of particle sizes across all diameters, allowing smaller particles to nest tightly between larger particles to create dense, interlocking matrices with minimal void space. Poorly graded soils are either uniform (particles all of one size) or gap-graded, resulting in higher void ratios and lower shear stability.

Fundamental Soil Engineering Properties

Allowable Bearing Capacity ( q a q_a q a ​ ): The maximum safe contact pressure (in psf) applied to the soil by a foundation footing without causing ultimate shear failure or exceeding tolerable settlement. IBC Chapter 18 establishes presumptive bearing capacities:

  • Crystalline bedrock: 12 , 000 psf 12,000 \text{ psf} 12 , 000 psf
  • Sedimentary and foliated rock: 4 , 000 psf 4,000 \text{ psf} 4 , 000 psf
  • Sandy gravel and gravel (GW, GP): 3 , 000 psf 3,000 \text{ psf} 3 , 000 psf
  • Sand, silty sand, clayey sand (SW, SP, SM, SC): 2 , 000 psf 2,000 \text{ psf} 2 , 000 psf
  • Clay, sandy clay, silty clay, and silt (CL, ML, MH, CH): 1 , 500 psf 1,500 \text{ psf} 1 , 500 psf

Permeability & Drainage: Coarse gravels and clean sands drain rapidly under gravity. Fine-grained silts and clays retain water due to molecular cohesion and tiny pore geometry, causing long-term hydrostatic pressure and soil saturation.

Frost Line & Frost Heave: In cold climates, fine-grained soils (particularly silts and silty sands) exhibit strong capillary action, drawing moisture upward toward the freezing zone to form segregated ice lenses . As water freezes, it expands by 9%, lifting foundations (frost heave). To prevent catastrophic winter structural damage, footings must bear below the local municipal frost line depth (ranging from 12 inches in southern states to 48–60+ inches in northern latitudes).

Atterberg Limits & Expansive Clays: Atterberg limits define the critical water content boundaries of fine-grained soils:

Liquid Limit (LL): Moisture content where soil transitions from a plastic state to a viscous liquid.

Plastic Limit (PL): Moisture content where soil crumbles when rolled into a 1/8-inch thread.

Plasticity Index ( P I PI P I ): The numerical range over which soil behaves plastically: P I = L L − P L PI = LL - PL P I = LL − P L .

Expansive Clays (Fat Clays, CH): Soils containing smectite, bentonite, or montmorillonite clay minerals swell dramatically when wet and shrink when dry. High-PI clays ( P I > 25 PI > 25 P I > 25 ) exert massive swelling uplift pressures (exceeding 10,000 psf), fracturing slabs and grade beams. Mitigation includes: over-excavating expansive soils and replacing with engineered non-cohesive fill; chemical stabilization (lime injection); moisture-retention barriers; or utilizing drilled pier foundations with cardboard or steel void forms beneath grade beams to allow the soil to expand upward without loading the structure.

Foundation Settlement:

Uniform Settlement: All portions of the foundation settle downward by an identical distance. Structural framing remains plumb, and structural damage is rare, though utility connections may shear.

Differential Settlement: Different sections of the building settle at unequal rates due to non-uniform soil strata, varied footing sizes, or eccentric loading. Differential settlement generates severe structural racking, masonry cracking, misaligned door and window frames, and potential structural collapse.

Geotechnical Site Investigation & Foundation Selection

Architects review the Geotechnical Engineering Report to understand subsurface stratigraphy and select appropriate structural foundation typologies.

Soil Borings & Standard Penetration Test (SPT)

Soil borings are advanced at regular intervals across the proposed building footprint (typically at building corners and column grids). The standard investigative test is the Standard Penetration Test (SPT - ASTM D1586) :

A standardized 2.0-inch outside diameter split-barrel sampler is driven into the bottom of a borehole using a 140-pound hammer dropping freely from a height of 30 inches .

The sampler is driven three successive 6-inch increments (total 18 inches).

The N N N -value (Blow Count) is the sum of blows required to drive the sampler through the final 12 inches (the second and third 6-inch increments). The first 6 inches is discarded as the seating drive.

Interpreting N N N -values:

Coarse Sands: N < 4 N < 4 N < 4 (very loose), N = 4 – 10 N = 4\text{–}10 N = 4 – 10 (loose), N = 10 – 30 N = 10\text{–}30 N = 10 – 30 (medium dense), N = 30 – 50 N = 30\text{–}50 N = 30 – 50 (dense), N > 50 N > 50 N > 50 (very dense).

Cohesive Clays: N < 2 N < 2 N < 2 (very soft), N = 2 – 4 N = 2\text{–}4 N = 2 – 4 (soft), N = 4 – 8 N = 4\text{–}8 N = 4 – 8 (medium stiff), N = 8 – 15 N = 8\text{–}15 N = 8 – 15 (stiff), N = 15 – 30 N = 15\text{–}30 N = 15 – 30 (very stiff), N > 30 N > 30 N > 30 (hard).

Foundation System Selection Matrix

Based on geotechnical boring profiles, allowable bearing pressure, and groundwater depth, the structural engineer and architect select the foundation typology:

Foundation Typology Classification Subsurface Conditions Warranting Use Structural Mechanism

Isolated Spread Footings Shallow Competent coarse-grained soil or stiff clay with high bearing capacity ( q a ≥ 3 , 000 psf q_a \ge 3,000 \text{ psf} q a ​ ≥ 3 , 000 psf ) at shallow depths Individual reinforced concrete pads beneath isolated structural columns

Continuous Strip Footings Shallow Competent soil at shallow depths below frost line Linear reinforced concrete footings supporting continuous load-bearing masonry or concrete walls

Mat / Raft Foundation Shallow Low-to-moderate bearing capacity ( q a = 1 , 500 – 2 , 500 psf q_a = 1,500\text{–}2,500 \text{ psf} q a ​ = 1 , 500 – 2 , 500 psf ); erratic, variable soil strata; high column loads; or water table just below slab Single heavily reinforced concrete slab extending under the entire building footprint, bridging localized soft zones to equalize differential settlement

Driven Piles Deep Upper 15 to 50+ feet consists of incompetent, loose, saturated soils, uncontrolled fill, or organic muck Slender precast concrete, steel H-piles, or pipe piles driven to depth; load resisted through end-bearing on deep bedrock or skin friction along the pile shaft

Drilled Shafts / Caissons Deep Heavy column loads; sound bedrock or dense gravel layer located 20 to 100+ feet below surface Large-diameter (30 to 72+ inches) vertical holes augered into the ground, reinforced with steel rebar cages, and filled with cast-in-place concrete; belled at base for end-bearing