Study guide
13.2 Lateral Force-Resisting Systems, Wind Loads & Seismic Design
Architect Registration Examination ARE 5.0
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: ARE 5.0 Structure, Delivery & Scoring
1.1 The Six Divisions: Items, Durations, Sections & Objectives 1.2 Eligibility, PSI Delivery, Fees, Scheduling & Rescheduling 1.3 Cut Scores, Score Reports, Provisional Feedback & Retakes
2 Chapter 2: Licensure Path, Item Types & Test-Day Strategy
2.1 Education Standard, AXP Hours, Settings & Reporting Rules 2.2 The NCARB Record, Score Validity Policy & Reciprocity 2.3 Item Types, Case Studies, Exam Tools, Breaks & Pacing
3 Chapter 3: Practice Management — Firm Resources, Conduct & the Work Environment
3.1 Assessing Practice Resources: Staffing, Development & Capital Investment 3.2 Regulating the Work Environment: FLSA, Antidiscrimination Law, OSHA & ADA Title III 3.3 Ethical Standards, the NCARB Rules of Conduct & the Standard of Care 3.4 Business Structures, Firm Ownership Rules & Practice-Wide Methodologies
4 Chapter 4: Practice Management — Firm Finances & Financial Health
4.1 Utilization, Overhead, Break-Even & Net Multiplier 4.2 Liquidity, Solvency & Reading Firm Financials Strategically 4.3 Accrual vs. Cash Accounting & the Architectural Balance Sheet 4.4 The Income Statement, Net Operating Revenue & Cash Flow Management
5 Chapter 5: Practice Management — Risk, Insurance & Business Development
5.1 Risk Management & the Firm’s Insurance Portfolio 5.2 Contractual Risk Allocation, Intellectual Property & Dispute Resolution 5.3 Client Requests, Compensation Methods, Project Delivery & Project Risk
6 Chapter 6: Project Management — Team, Resources & Consultants
6.1 Assembling the Project Team: Roles, Authority & Selection Criteria 6.2 Allocating & Managing Project Resources: Hours, Rates & Leveling 6.3 Consultant Selection, Qualifications-Based Selection & Scope Boundaries 6.4 AIA C401: Flow-Through, Consultant Standard of Care, Insurance & Payment
7 Chapter 7: Project Management — Work Planning, Scheduling & Budget Control
7.1 The Project Work Plan & Phase Fee Allocation 7.2 Work Breakdown Structures, Scheduling Methods & Dependency Logic 7.3 Critical Path Calculations, Float & Schedule Compression 7.4 Project Communication: Paths, Instruments, Meetings & the Record 7.5 Monitoring the Project Budget with Earned Value Management 7.6 Scope Creep, Additional Services & Written Authorization
8 Chapter 8: Project Management — Contracts, Approvals & Quality Control
8.1 AIA B101: Initial Information, Standard of Care & Basic Services 8.2 B101: Owner Duties, Cost of the Work, Copyright, Termination & Compensation 8.3 The Owner-Contractor Agreement & A201 Contractor Responsibilities 8.4 A201: Architect Administration, Changes, Claims & Separate Contractors 8.5 Regulatory Compliance, Authorities Having Jurisdiction & Project Approvals 8.6 Documenting a Project for the Specified Delivery Method 8.7 Quality Assurance, Quality Control, Constructability & the Record
9 Chapter 9: Programming & Analysis — Site & Environmental Conditions
9.1 Climate Classification, Solar Geometry & Passive Site Opportunities 9.2 Microclimate, Wind, Topography, Grading & Site Hydrology 9.3 Environmental Due Diligence: CERCLA Liability & Phase I / Phase II Assessments 9.4 Soil Mechanics, Geotechnical Investigation & Foundation Selection 9.5 Vehicular Circulation, Access Management, Parking & Emergency Access
10 Chapter 10: Programming & Analysis — Zoning, Codes & Site Infrastructure
10.1 Pedestrian Circulation, Site Utilities & Contextual Constraints 10.2 Zoning Authority, Euclidean and Form-Based Codes & Bulk Standards 10.3 Non-Conforming Uses, Variances, Easements & Parking Feasibility 10.4 IBC Occupancy Classification, Mixed Occupancy & Incidental Uses 10.5 IBC Construction Types, Fire-Resistance Ratings & Compartmentation
11 Chapter 11: Programming & Analysis — Building Programming & Feasibility
11.1 Programming Methodology, Net vs. Gross Area & Building Efficiency 11.2 Adjacency Matrices, Bubble Diagrams, Blocking & Stacking 11.3 Evaluating an Existing Building Against a Program 11.4 Reviewing Project Budget & Schedule Feasibility Against Scope 11.5 Identifying Building & Structural System Alternatives at Programming
12 Chapter 12: Project Planning & Design — Siting, Configuration, Codes & Life Safety
12.1 Building Siting, Neighborhood Context, Zoning Application & Configuration 12.2 IBC Allowable Area: Tabular Area, Frontage & Sprinkler Increases 12.3 Building Height, Story Limits, Mixed Occupancy & Unlimited Area Buildings 12.4 Means of Egress Components & Occupant Load Calculation 12.5 Exit Count, Remoteness, Egress Capacity, Travel Distance & Dead Ends 12.6 Accessible Routes, Slopes, Protruding Objects & Ramp Design 12.7 Door Clearances, Operating Hardware & Accessible Toilet Room Geometry
13 Chapter 13: Project Planning & Design — Structural & Mechanical Systems
13.1 Selecting Structural Systems: Steel, Concrete, Wood & Masonry 13.2 Lateral Force-Resisting Systems, Wind Loads & Seismic Design 13.3 Thermal Comfort, ASHRAE Standard 55 & Psychrometrics 13.4 HVAC System Typologies, Spatial Allocation & Central Plant Equipment 13.5 Potable Water Supply, Drainage, Waste & Vent Systems 13.6 Electrical Distribution, Emergency Power, Lighting & Daylighting 13.7 Fire Suppression, Standpipes, Conveying, Security & Communications
14 Chapter 14: Project Planning & Design — Envelope, Materials & Cost
14.1 Envelope Thermodynamics, Heat Transfer & Fenestration Performance 14.2 Thermal Bridging, Continuous Insulation & Thermal Mass 14.3 Passive Solar Heating, Natural Ventilation & Daylighting Architecture 14.4 Material Selection Criteria, Fire Performance & Vapor Permeance 14.5 Life Cycle Assessment, Embodied Carbon & Material Transparency 14.6 Galvanic Compatibility, Thermal Movement & Masonry Durability 14.7 Cost Estimating by Phase & Contingency Planning 14.8 Life-Cycle Cost Analysis, Present Value & Value Engineering
15 Chapter 15: Project Development & Documentation — Roofing, Waterproofing & Wall Assemblies
15.1 Low-Slope Roofing Systems, Membranes & Drainage Geometry 15.2 Flashing, Parapets, Copings & Roof Penetration Detailing 15.3 Steep-Slope Roofing & Below-Grade Waterproofing 15.4 Enclosure Control Layers & Rain Screen Cladding Systems 15.5 Vapor Retarders, Permeance Classes & Dew Point Control
16 Chapter 16: Project Development & Documentation — Connections, Coordination & Interiors
16.1 Structural Steel Connections & Base Plate Detailing 16.2 Concrete Reinforcing, Cover & Building Movement Joints 16.3 Sizing Structural, Mechanical, Electrical & Plumbing Components 16.4 Ceiling Plenum Coordination, Clash Detection & Level of Development 16.5 Vertical Chases, Shaft Walls, Through-Penetration Firestopping & Rated Joints 16.6 Interior Partition Framing, Head-of-Wall Details & Rated Gypsum Assemblies 16.7 Sound Isolation, STC, NRC & Reverberation Time 16.8 Door and Frame Construction & Fire Door Assemblies Under NFPA 80 16.9 Hardware Functions, Fire-Protection vs. Fire-Resistance Glazing
17 Chapter 17: Project Development & Documentation — Drawings, Specifications & Estimates
17.1 The National CAD Standard, Sheet Modules & Title Blocks 17.2 Drawing Cross-Referencing, Coordination & Revision Control 17.3 Documenting Site Features: Survey, Civil, Grading, Utilities & Landscape 17.4 The Project Manual & CSI MasterFormat Divisions 17.5 Section Numbering & the CSI Three-Part SectionFormat 17.6 Specification Methods & Document Precedence 17.7 Quantity Takeoff Estimating, General Conditions, Overhead & Alternates
18 Chapter 18: Construction & Evaluation — Procurement, Bidding & Preconstruction
18.1 Procurement Methods & AIA A701 Instructions to Bidders 18.2 Addenda Mechanics & Surety Bonds 18.3 The Preconstruction Conference & Administrative Protocols 18.4 Submittal Schedules, Long-Lead Items, Permits & Special Inspections 18.5 Bid Opening, Bidder Qualification & Discrepancy Rules 18.6 Alternates, Allowances, Unit Prices & Contract Award
19 Chapter 19: Construction & Evaluation — Observation & Contract Administration
19.1 The Architect’s Site Observation Role & the Means and Methods Firewall 19.2 Rejecting Non-Conforming Work, Special Inspections & Field Reports 19.3 Submittal Workflow, Review Responsibility & Action Stamps 19.4 Delegated Design, Design-Assist & Deferred Submittals 19.5 Requests for Information & Architect’s Supplemental Instructions 19.6 Change Orders, Construction Change Directives & Instrument Comparison
20 Chapter 20: Construction & Evaluation — Payment, Closeout & Evaluation
20.1 The Schedule of Values & the Application and Certificate for Payment 20.2 Stored Materials, Retainage, Certification Duties & Withholding 20.3 Substantial Completion & the Punch List Protocol 20.4 The Certificate of Substantial Completion & Its Legal Consequences 20.5 Final Completion, Final Payment & the Closeout Package 20.6 Warranty Administration, the Eleven-Month Walk-Through & Post-Occupancy Evaluation
13.2 Lateral Force-Resisting Systems, Wind Loads & Seismic Design
Key Takeaways Explain This Topic AI
A lateral load path runs from the cladding to the diaphragm, through chords and collectors, into the vertical lateral system, and down to the foundation.
Shear walls, braced frames, and moment frames trade stiffness against architectural openness, with moment frames the most permeable and least stiff.
Wind load is an externally applied pressure proportional to exposure, height, and building shape, and it acts on the building surface.
Seismic load is an inertial force generated by the building’s own mass, so reducing mass reduces seismic demand while it does not reduce wind demand.
Plan and vertical irregularities such as re-entrant corners, soft stories, and torsional asymmetry sharply increase seismic vulnerability.
Last updated: September 2026
Lateral Force-Resisting Systems (LFRS)
Every building must possess a continuous load path that transfers horizontal lateral loads—generated by wind or seismic ground acceleration—from the building envelope, through the floor and roof diaphragms, down through the vertical lateral force-resisting elements, and into the foundations and supporting earth. Lateral Loads (Wind / Seismic)
- │
- ▼
- Building Envelope (Curtain Wall, Roof Cladding)
- │
- ▼
- Horizontal Diaphragms (Concrete Slab, Metal Deck, Wood Plywood / OSB)
- │
- ▼
- Collectors & Drag Struts (Girders, Rebar Ties, Steel Plates)
- │
- ▼
- Vertical LFRS (Shear Walls, Braced Frames, Moment Frames)
- │
- ▼
- Foundations (Spread Footings, Grade Beams, Drilled Piers, Piles)
- │
- ▼
- Supporting Earth / Bedrock
- Diaphragms, Chords & Collectors (Drag Struts)
Diaphragm: A horizontal structural assembly (such as a cast-in-place concrete slab, metal deck with concrete topping, or plywood/OSB subfloor) acting as a deep horizontal beam. The floor/roof web resists horizontal shear, while boundary elements ( chords ) resist flexural tension and compression.
Collectors (Drag Struts): Structural members (beams, girders, or embedded steel ties) that "collect" lateral shear forces from wide open diaphragm areas and "drag" or deliver those concentrated loads into localized vertical lateral elements (such as a shear wall or braced frame core).
Vertical LFRS Typologies Compared
Lateral System Structural Stiffness Drift Control Architectural Planning Impact Seismic Ductility & Detailing
Shear Walls Highest stiffness ; smallest lateral deflection Superior; prevents damage to fragile cladding and interior drywall Most restrictive ; solid structural barriers limit windows, doors, and interior spatial reconfiguration Concrete, masonry, or steel plate; coupled shear walls use ductile coupling beams to dissipate seismic energy
Concentric Braced Frames (CBF) High stiffness ; moderate deflection Excellent; limits interstory drift effectively Moderate; diagonal members cross structural bays, limiting door and window placements Centerlines of braces, beams, and columns intersect at a point (X-bracing, chevron, single diagonal); braces buckle in compression under cyclic seismic loads
Eccentrically Braced Frames (EBF) High stiffness with exceptional ductility Very good; balances drift control with energy absorption Better than CBF; braces are offset from joints, creating clear center corridors and openings Braces do not meet at a single point; an engineered shear link beam yields plastically to absorb massive seismic energy like a mechanical fuse
Moment-Resisting Frames (MRF) Lowest stiffness ; highest lateral deflection Poor; generates high interstory drift requiring flexible curtain wall joints and seismic separations Most flexible ; 100% open structural bays without diagonal bracing or solid opaque walls Beams and columns joined by rigid, moment-resistant connections; in high seismic zones, Special Moment Frames (SMF) mandate Reduced Beam Section (RBS / "dog-bone") cuts to force plastic hinges into beams away from column faces
Environmental Lateral Loads: Wind vs. Seismic Dynamics
Designing for lateral forces requires understanding the fundamental differences in how wind and seismic loads are generated and applied to a structure.
Wind Loads (ASCE 7-16 / ASCE 7-22)
Wind is an aerodynamic, external fluid force acting directly upon the exterior surfaces of the building envelope. Wind pressures are not uniform; they produce positive inward pressure on windward facades, negative outward suction on leeward and side walls, and strong uplift suctions on roofs and building corners.
Height & Aerodynamics: Wind velocity and velocity pressure ( q z q_z q z ) increase exponentially with height above ground level ( z z z ): q z = 0.00256 × K z × K z t × K d × K e × V 2 q_z = 0.00256 \times K_z \times K_{zt} \times K_d \times K_e \times V^2 q z = 0.00256 × K z × K z t × K d × K e × V 2
Where V V V is basic wind speed (mph), K z K_z K z is the velocity pressure exposure coefficient, K z t K_{zt} K z t is the topographic factor (accounting for wind acceleration over ridges and escarpments), K d K_d K d is the wind directionality factor, and K e K_e K e is ground elevation factor.
ASCE 7 Exposure Categories:
Exposure B: Urban and suburban areas, wooded terrain, or closely spaced obstructions having the size of single-family dwellings or larger. Produces maximum ground surface friction, resulting in the lowest wind pressures.
Exposure C: Open terrain with scattered obstructions, flat open country, grasslands, and shorelines in hurricane-prone regions. The baseline standard exposure.
Exposure D: Flat, unobstructed areas exposed to wind blowing over open water for a distance of at least 1 mile (coastal shorelines, ocean fronts, large inland lakes). Produces minimum surface friction and maximum design wind pressures.
Seismic Loads (ASCE 7 / IBC)
Unlike wind, earthquakes do not apply external pressure to a building. An earthquake causes rapid, multi-directional ground accelerations beneath the building. Because the building possesses mass, its physical inertia resists this sudden acceleration ( F = m × a F = m \times a F = m × a ). Inertial forces develop internally at every floor level proportional to the mass of that floor.
Equivalent Lateral Force (ELF) Procedure: The total horizontal design force at the base of the structure is defined as the Seismic Base Shear ( V V V ) : V = C s × W V = C_s \times W V = C s × W
Where:
W W W = Total effective seismic dead load of the structure (including permanent self-weight, fixed MEP equipment, 25% of storage live loads, partition allowances of minimum 10 psf, and a percentage of roof snow load).
C s C_s C s = Seismic response coefficient: C s = S D S ( R I e ) C_s = \frac{S_{DS}}{\left(\frac{R}{I_e}\right)} C s = ( I e R ) S D S
S D S S_{DS} S D S = Design spectral response acceleration parameter at short periods, calculated from mapped United States Geological Survey (USGS) ground motions ( S s S_s S s ) adjusted for site soil classification (Soil Classes A through F).
I e I_e I e = Seismic Importance Factor , reflecting the building's Risk Category under IBC Chapter 16 ( 1.0 1.0 1.0 for standard commercial/residential [Category II]; 1.25 1.25 1.25 for schools, public assemblies >300 [Category III]; 1.5 1.5 1.5 for essential life-safety facilities like hospitals, police stations, and emergency operations centers [Category IV]).
R R R = Response Modification Factor , reflecting the ductility, damping, and energy-dissipation capacity of the specific LFRS. Highly ductile systems that deform plastically without collapsing have high R R R values, significantly reducing design base shear forces (e.g., Special Moment Frames: R = 8 R = 8 R = 8 ; Special Concentrically Braced Frames: R = 6 R = 6 R = 6 ). Brittle, non-ductile structural systems have low R R R values and must be designed for much higher elastic forces (e.g., Unreinforced Masonry: R = 1.5 R = 1.5 R = 1.5 ; Ordinary Reinforced Concrete Shear Walls: R = 4 R = 4 R = 4 to 5 5 5 ).
Seismic Design Categories (SDC): Buildings are classified into Seismic Design Categories A through F based on their mapped spectral accelerations, geotechnical soil site class, and occupancy Risk Category. Structures in SDC D, E, and F face rigorous architectural constraints: limitations on structural height, strict prohibitions against horizontal and vertical structural irregularities (such as soft stories, torsional offsets, or re-entrant corners), and mandatory ductile connection detailing.