Study guide

14.6 Galvanic Compatibility, Thermal Movement & Masonry Durability

Architect Registration Examination ARE 5.0

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: ARE 5.0 Structure, Delivery & Scoring

1.1 The Six Divisions: Items, Durations, Sections & Objectives 1.2 Eligibility, PSI Delivery, Fees, Scheduling & Rescheduling 1.3 Cut Scores, Score Reports, Provisional Feedback & Retakes

2 Chapter 2: Licensure Path, Item Types & Test-Day Strategy

2.1 Education Standard, AXP Hours, Settings & Reporting Rules 2.2 The NCARB Record, Score Validity Policy & Reciprocity 2.3 Item Types, Case Studies, Exam Tools, Breaks & Pacing

3 Chapter 3: Practice Management — Firm Resources, Conduct & the Work Environment

3.1 Assessing Practice Resources: Staffing, Development & Capital Investment 3.2 Regulating the Work Environment: FLSA, Antidiscrimination Law, OSHA & ADA Title III 3.3 Ethical Standards, the NCARB Rules of Conduct & the Standard of Care 3.4 Business Structures, Firm Ownership Rules & Practice-Wide Methodologies

4 Chapter 4: Practice Management — Firm Finances & Financial Health

4.1 Utilization, Overhead, Break-Even & Net Multiplier 4.2 Liquidity, Solvency & Reading Firm Financials Strategically 4.3 Accrual vs. Cash Accounting & the Architectural Balance Sheet 4.4 The Income Statement, Net Operating Revenue & Cash Flow Management

5 Chapter 5: Practice Management — Risk, Insurance & Business Development

5.1 Risk Management & the Firm’s Insurance Portfolio 5.2 Contractual Risk Allocation, Intellectual Property & Dispute Resolution 5.3 Client Requests, Compensation Methods, Project Delivery & Project Risk

6 Chapter 6: Project Management — Team, Resources & Consultants

6.1 Assembling the Project Team: Roles, Authority & Selection Criteria 6.2 Allocating & Managing Project Resources: Hours, Rates & Leveling 6.3 Consultant Selection, Qualifications-Based Selection & Scope Boundaries 6.4 AIA C401: Flow-Through, Consultant Standard of Care, Insurance & Payment

7 Chapter 7: Project Management — Work Planning, Scheduling & Budget Control

7.1 The Project Work Plan & Phase Fee Allocation 7.2 Work Breakdown Structures, Scheduling Methods & Dependency Logic 7.3 Critical Path Calculations, Float & Schedule Compression 7.4 Project Communication: Paths, Instruments, Meetings & the Record 7.5 Monitoring the Project Budget with Earned Value Management 7.6 Scope Creep, Additional Services & Written Authorization

8 Chapter 8: Project Management — Contracts, Approvals & Quality Control

8.1 AIA B101: Initial Information, Standard of Care & Basic Services 8.2 B101: Owner Duties, Cost of the Work, Copyright, Termination & Compensation 8.3 The Owner-Contractor Agreement & A201 Contractor Responsibilities 8.4 A201: Architect Administration, Changes, Claims & Separate Contractors 8.5 Regulatory Compliance, Authorities Having Jurisdiction & Project Approvals 8.6 Documenting a Project for the Specified Delivery Method 8.7 Quality Assurance, Quality Control, Constructability & the Record

9 Chapter 9: Programming & Analysis — Site & Environmental Conditions

9.1 Climate Classification, Solar Geometry & Passive Site Opportunities 9.2 Microclimate, Wind, Topography, Grading & Site Hydrology 9.3 Environmental Due Diligence: CERCLA Liability & Phase I / Phase II Assessments 9.4 Soil Mechanics, Geotechnical Investigation & Foundation Selection 9.5 Vehicular Circulation, Access Management, Parking & Emergency Access

10 Chapter 10: Programming & Analysis — Zoning, Codes & Site Infrastructure

10.1 Pedestrian Circulation, Site Utilities & Contextual Constraints 10.2 Zoning Authority, Euclidean and Form-Based Codes & Bulk Standards 10.3 Non-Conforming Uses, Variances, Easements & Parking Feasibility 10.4 IBC Occupancy Classification, Mixed Occupancy & Incidental Uses 10.5 IBC Construction Types, Fire-Resistance Ratings & Compartmentation

11 Chapter 11: Programming & Analysis — Building Programming & Feasibility

11.1 Programming Methodology, Net vs. Gross Area & Building Efficiency 11.2 Adjacency Matrices, Bubble Diagrams, Blocking & Stacking 11.3 Evaluating an Existing Building Against a Program 11.4 Reviewing Project Budget & Schedule Feasibility Against Scope 11.5 Identifying Building & Structural System Alternatives at Programming

12 Chapter 12: Project Planning & Design — Siting, Configuration, Codes & Life Safety

12.1 Building Siting, Neighborhood Context, Zoning Application & Configuration 12.2 IBC Allowable Area: Tabular Area, Frontage & Sprinkler Increases 12.3 Building Height, Story Limits, Mixed Occupancy & Unlimited Area Buildings 12.4 Means of Egress Components & Occupant Load Calculation 12.5 Exit Count, Remoteness, Egress Capacity, Travel Distance & Dead Ends 12.6 Accessible Routes, Slopes, Protruding Objects & Ramp Design 12.7 Door Clearances, Operating Hardware & Accessible Toilet Room Geometry

13 Chapter 13: Project Planning & Design — Structural & Mechanical Systems

13.1 Selecting Structural Systems: Steel, Concrete, Wood & Masonry 13.2 Lateral Force-Resisting Systems, Wind Loads & Seismic Design 13.3 Thermal Comfort, ASHRAE Standard 55 & Psychrometrics 13.4 HVAC System Typologies, Spatial Allocation & Central Plant Equipment 13.5 Potable Water Supply, Drainage, Waste & Vent Systems 13.6 Electrical Distribution, Emergency Power, Lighting & Daylighting 13.7 Fire Suppression, Standpipes, Conveying, Security & Communications

14 Chapter 14: Project Planning & Design — Envelope, Materials & Cost

14.1 Envelope Thermodynamics, Heat Transfer & Fenestration Performance 14.2 Thermal Bridging, Continuous Insulation & Thermal Mass 14.3 Passive Solar Heating, Natural Ventilation & Daylighting Architecture 14.4 Material Selection Criteria, Fire Performance & Vapor Permeance 14.5 Life Cycle Assessment, Embodied Carbon & Material Transparency 14.6 Galvanic Compatibility, Thermal Movement & Masonry Durability 14.7 Cost Estimating by Phase & Contingency Planning 14.8 Life-Cycle Cost Analysis, Present Value & Value Engineering

15 Chapter 15: Project Development & Documentation — Roofing, Waterproofing & Wall Assemblies

15.1 Low-Slope Roofing Systems, Membranes & Drainage Geometry 15.2 Flashing, Parapets, Copings & Roof Penetration Detailing 15.3 Steep-Slope Roofing & Below-Grade Waterproofing 15.4 Enclosure Control Layers & Rain Screen Cladding Systems 15.5 Vapor Retarders, Permeance Classes & Dew Point Control

16 Chapter 16: Project Development & Documentation — Connections, Coordination & Interiors

16.1 Structural Steel Connections & Base Plate Detailing 16.2 Concrete Reinforcing, Cover & Building Movement Joints 16.3 Sizing Structural, Mechanical, Electrical & Plumbing Components 16.4 Ceiling Plenum Coordination, Clash Detection & Level of Development 16.5 Vertical Chases, Shaft Walls, Through-Penetration Firestopping & Rated Joints 16.6 Interior Partition Framing, Head-of-Wall Details & Rated Gypsum Assemblies 16.7 Sound Isolation, STC, NRC & Reverberation Time 16.8 Door and Frame Construction & Fire Door Assemblies Under NFPA 80 16.9 Hardware Functions, Fire-Protection vs. Fire-Resistance Glazing

17 Chapter 17: Project Development & Documentation — Drawings, Specifications & Estimates

17.1 The National CAD Standard, Sheet Modules & Title Blocks 17.2 Drawing Cross-Referencing, Coordination & Revision Control 17.3 Documenting Site Features: Survey, Civil, Grading, Utilities & Landscape 17.4 The Project Manual & CSI MasterFormat Divisions 17.5 Section Numbering & the CSI Three-Part SectionFormat 17.6 Specification Methods & Document Precedence 17.7 Quantity Takeoff Estimating, General Conditions, Overhead & Alternates

18 Chapter 18: Construction & Evaluation — Procurement, Bidding & Preconstruction

18.1 Procurement Methods & AIA A701 Instructions to Bidders 18.2 Addenda Mechanics & Surety Bonds 18.3 The Preconstruction Conference & Administrative Protocols 18.4 Submittal Schedules, Long-Lead Items, Permits & Special Inspections 18.5 Bid Opening, Bidder Qualification & Discrepancy Rules 18.6 Alternates, Allowances, Unit Prices & Contract Award

19 Chapter 19: Construction & Evaluation — Observation & Contract Administration

19.1 The Architect’s Site Observation Role & the Means and Methods Firewall 19.2 Rejecting Non-Conforming Work, Special Inspections & Field Reports 19.3 Submittal Workflow, Review Responsibility & Action Stamps 19.4 Delegated Design, Design-Assist & Deferred Submittals 19.5 Requests for Information & Architect’s Supplemental Instructions 19.6 Change Orders, Construction Change Directives & Instrument Comparison

20 Chapter 20: Construction & Evaluation — Payment, Closeout & Evaluation

20.1 The Schedule of Values & the Application and Certificate for Payment 20.2 Stored Materials, Retainage, Certification Duties & Withholding 20.3 Substantial Completion & the Punch List Protocol 20.4 The Certificate of Substantial Completion & Its Legal Consequences 20.5 Final Completion, Final Payment & the Closeout Package 20.6 Warranty Administration, the Eleven-Month Walk-Through & Post-Occupancy Evaluation

14.6 Galvanic Compatibility, Thermal Movement & Masonry Durability

Key Takeaways Explain This Topic AI

Galvanic corrosion requires two dissimilar metals, an electrolyte, and an electrical path, with the less noble metal corroding as the anode.

A small anode connected to a large cathode corrodes rapidly, which is why aluminum fasteners in stainless steel assemblies fail quickly.

Brick masonry expands irreversibly over time and requires expansion joints, while concrete shrinks and requires control joints — the two are not interchangeable.

Freeze-thaw spalling occurs when saturated masonry freezes, so drainage and flashing matter more than the compressive strength of the unit.

Efflorescence deposits salts on the surface and is cosmetic, while subflorescence deposits them below the surface and causes spalling.

Last updated: September 2026

  • Material Compatibility & Galvanic Corrosion Mechanics
  • The Electrochemical Mechanism of Galvanic Corrosion

Galvanic corrosion is an electrochemical reaction that occurs when three mandatory conditions are simultaneously satisfied:

Two electrochemically dissimilar metals with different electrode potentials are present.

An electrical conductive path directly connects the two metals (physical metallic contact).

An electrolyte (water, dew, rainfall, or salt-laden coastal moisture) bridges between the metals, enabling ionic transfer. THE GALVANIC SERIES OF METALS

  • ANODIC / ACTIVE (Corrodes Sacrificially to Protect Noble Metal)
  • ▲ Magnesium & Magnesium Alloys
  • │ Zinc (Galvanizing coatings, zinc cladding)
  • │ Aluminum (Extruded 6063-T5, sheet cladding)
  • │ Cadmium
  • │ Carbon Steel, Cast Iron, Structural Steel
  • │ Lead / Tin solders
  • │ Architectural Bronze / Brass
  • │ Copper (16-oz cold-rolled sheet)
  • │ Stainless Steel 304 (Active)
  • │ Stainless Steel 304 (Passivated)
  • │ Stainless Steel 316 (Passivated)
  • ▼ Titanium, Gold, Platinum
  • CATHODIC / NOBLE (Protected from Electrochemical Attack)

When a galvanic circuit forms, the more active (anodic) metal corrodes at an accelerated rate, sacrificing its electrons to preserve the more noble (cathodic) metal. The farther apart two metals sit on the galvanic series, the greater the electrochemical voltage differential, and the more severe the galvanic corrosion.

The Critical Anode-to-Cathode Surface Area Ratio

The rate of galvanic degradation is governed by the ratio of the anodic surface area to the cathodic surface area:

Small Anode + Large Cathode = Rapid, Catastrophic Failure: Fastening large copper facade panels (massive noble cathode) with zinc-coated carbon steel screws (small active anode) concentrates galvanic electron draw onto tiny fastener cross-sections. The steel screws will dissolve and shear off within months.

Large Anode + Small Cathode = Diffuse, Negligible Attack: Fastening large structural steel plates (large active anode) with stainless steel or copper rivets (small noble cathode) spreads the galvanic reaction over a massive surface area, resulting in virtually undetectable, harmless corrosion.

The Copper Wash Runoff Catastrophe

Rainwater cascading over copper roofs, copper through-wall flashings, or bronze decorative trim dissolves microscopic concentrations of cupric ions ( C u 2 + Cu^{2+} C u 2 + ) and acidic copper salts. When this copper-laden runoff water washes downstream over aluminum siding, galvanized steel lintels, or zinc-coated gutters, the copper ions electrochemically plate out onto the active metal. This establishes millions of microscopic localized galvanic couples across the aluminum or zinc surface, causing aggressive pitting, localized perforation, and structural failure within 1 to 3 years.

Mandatory Architectural Rule: Water draining from copper or noble metals must never discharge onto downstream galvanized steel, aluminum, or zinc components . Copper flashings must drain exclusively into copper, stainless steel, or non-metallic PVC/cast-iron drainage systems.

Dielectric Separation Detailing

To integrate dissimilar architectural metals without galvanic corrosion, details must incorporate continuous dielectric breaks :

Non-Conductive Isolation Gaskets: Continuous 1/8-inch neoprene, EPDM, Teflon, or high-density polyethylene (HDPE) sheets separating dissimilar metal brackets.

Sleeved Fasteners: Stainless steel bolts connecting aluminum curtain wall clips to structural steel embeds must be fitted with non-conductive neoprene/nylon washers and dielectric sleeved bushings to eliminate metallic thread-to-hole contact.

Protective Barrier Coatings: Heavy bitumastic coal-tar paints, epoxy barrier primers, or polyisobutylene tapes applied directly to aluminum surfaces before embedding them in contact with wet alkaline concrete or mortar.

  • Thermal Movement & Expansion Joint Engineering
  • Physics of Thermal Expansion: The Expansion Formula

All construction materials expand when heated and contract when cooled. The linear thermal movement of an unconstrained building component is calculated using: Δ L = α ⋅ L ⋅ Δ T \Delta L = \alpha \cdot L \cdot \Delta T Δ L = α ⋅ L ⋅ Δ T

Where:

Δ L \Delta L Δ L = Change in member length (inches)

α \alpha α = Linear coefficient of thermal expansion ( in / ( in ⋅ ∘ F ) \text{in}/(\text{in}\cdot^\circ\text{F}) in / ( in ⋅ ∘ F ) )

L L L = Total length of the member (inches)

Δ T \Delta T Δ T = Design temperature differential between extreme winter freeze and peak direct summer solar exposure ( ∘ F ^\circ\text{F} ∘ F )

Material Coefficient of Thermal Expansion ( α \alpha α ) Movement over 100 ft Wall ( Δ T = 120 ∘ F \Delta T = 120^\circ\text{F} Δ T = 12 0 ∘ F )

Extruded Aluminum 12.8 × 10 − 6 in / ( in ⋅ ∘ F ) 12.8 \times 10^{-6} \text{ in}/(\text{in}\cdot^\circ\text{F}) 12.8 × 1 0 − 6 in / ( in ⋅ ∘ F ) 1.84 inches (Highest expansion)

Structural Steel 6.5 × 10 − 6 in / ( in ⋅ ∘ F ) 6.5 \times 10^{-6} \text{ in}/(\text{in}\cdot^\circ\text{F}) 6.5 × 1 0 − 6 in / ( in ⋅ ∘ F ) 0.94 inches

Cast-in-Place Concrete 5.5 × 10 − 6 in / ( in ⋅ ∘ F ) 5.5 \times 10^{-6} \text{ in}/(\text{in}\cdot^\circ\text{F}) 5.5 × 1 0 − 6 in / ( in ⋅ ∘ F ) 0.79 inches

Clay Brick Masonry 3.4 × 10 − 6 in / ( in ⋅ ∘ F ) 3.4 \times 10^{-6} \text{ in}/(\text{in}\cdot^\circ\text{F}) 3.4 × 1 0 − 6 in / ( in ⋅ ∘ F ) 0.49 inches (Lowest expansion)

Wood (parallel to grain) 2.0 × 10 − 6 in / ( in ⋅ ∘ F ) 2.0 \times 10^{-6} \text{ in}/(\text{in}\cdot^\circ\text{F}) 2.0 × 1 0 − 6 in / ( in ⋅ ∘ F ) 0.29 inches

Critical Engineering Takeaway: Extruded aluminum expands approximately twice as fast as steel and nearly four times faster than clay brick . In long continuous assemblies (such as aluminum curtain wall mullions or metal parapet copings), thermal expansion will buckle members, crush glazing, and shear anchor fasteners unless engineered movement joints are integrated.

Brick Masonry Expansion Joints vs. Concrete Control Joints

Architects must distinguish between movement joint typologies based on fundamental material physics:

Clay Brick Masonry — Expansion Joints: Fired clay brick expands reversibly with temperature increases and expands irreversibly over decades as it slowly absorbs moisture from atmospheric humidity . Brick never shrinks back to its initial kiln dimensions. Therefore, brick facades require Expansion Joints —completely open, vertical joints extending through the entire brick wythe (free of mortar, wire ties, and structural rebar). The joint is backed by a compressible closed-cell polyethylene foam backer rod and sealed with an elastomeric silicone sealant. Per Brick Industry Association (BIA) standards:

Spaced at maximum 20 to 25 feet on center along straight walls.

Positioned within 4 to 8 feet of external building corners (where orthogonal wall expansion causes destructive corner rotation and diagonal cracking).

Located at changes in wall height, thickness, or foundation steps.

Concrete & CMU — Control Joints: Concrete and concrete masonry units (CMU) undergo initial drying shrinkage as chemical hydration cures excess water out of the mix. CMU walls require Control Joints —continuous vertical weakened planes (formed with sash blocks and preformed rubber gaskets) spaced every 20 to 25 feet that induce drying shrinkage cracks to occur along clean, sealed lines rather than cracking through block faces.

Curtain Wall Slip Joints & Coping Details

Aluminum curtain wall vertical mullions must absorb both thermal expansion and structural building movement (interstory drift, concrete slab creep, and live load floor deflection). Vertical mullions incorporate an internal telescoping slip joint (expansion spigot) at each floor level. The mullion is anchored rigidly at one floor slab (fixed dead-load anchor) and secured with slotted holes at the adjacent floor slab (expansion anchor), allowing 1/2-inch to 3/4-inch free vertical slip without transferring structural floor loads into the glass vision panels. Parapet metal copings incorporate continuous 24-gauge concealed splice plates with a 1/4-inch thermal expansion gap every 10 to 12 feet, sealed with non-hardening butyl or silicone.

  • Masonry Envelope Durability & Moisture Defense
  • Moisture Transport & Freeze-Thaw Spalling

Bulk moisture moves through exterior wall assemblies via gravity, wind-driven kinetic momentum, capillary action through microscopic pores, and air pressure differentials across facade fissures. When moisture penetrates porous brick, it creates serious freeze-thaw vulnerabilities:

Freeze-Thaw Spalling Mechanics: Liquid water expands by approximately 9% in volume upon freezing at 32 ∘ F 32^\circ\text{F} 3 2 ∘ F ( 0 ∘ C 0^\circ\text{C} 0 ∘ C ). If clay brick or stone absorbs moisture past its critical saturation threshold (typically exceeding 80% to 85% of its internal pore volume) and experiences subfreezing temperatures, the hydraulic expansion pressure generated within the pores exceeds the tensile strength of the fired clay matrix. The outer 1/8-inch to 1/2-inch fired face of the brick fractures, flakes off, and disintegrates ( spalling ), exposing the soft internal brick core to rapid erosion. Freeze-thaw resistance is evaluated under ASTM C67 .

Efflorescence & Subflorescence

Efflorescence: The deposition of a white, powdery crystalline crust of water-soluble inorganic mineral salts (calcium sulfate, sodium sulfate, potassium carbonate) on the exterior face of masonry. Efflorescence requires three concurrent conditions: (1) soluble salts present within the brick, mortar sand, or cement grout; (2) liquid moisture penetrating the wall to dissolve the salts; and (3) an evaporation mechanism that draws the salt solution to the exterior face, where the water evaporates and deposits the crystallized salts. While cosmetically unsightly, efflorescence is harmless and can be scrubbed off with water and mild acids.

Subflorescence: A destructive failure occurring when moisture evaporates beneath the surface within the microscopic pore network of the brick rather than on the face. As water evaporates internally, growing salt crystals generate massive hydraulic crystallization pressures (exceeding 4,000 psi) that rupture the brick from the inside out, causing severe surface spalling.

The Cavity Wall Rainscreen Assembly & Flashing Detailing

The drained cavity wall (rainscreen assembly) is the most resilient exterior wall typology in modern architecture. It recognizes that no exterior cladding is 100% waterproof and relies on a secondary internal drainage defense: Exterior Clear Cavity Backup Structure

  • Brick Veneer (Drainage & Capillary (Continuous Insulation,
  • (Primary Cladding) Break: Min 2 inches) WRB, Sheathing, Studs)
  • │ │ │
  • ▼ ▼ ▼
  • ┌──┐ ┌───┐ ┌───┐
  • │ │ │ │ │ │ ◄── Weather-Resistive Barrier
  • │ │ │ │ │ │ (WRB laps over flashing)
  • │ │ │ │ │ │
  • │ │ │ │ 8" Min Upturn │ │
  • │ │ │ │ ┌──────────────┼───┤
  • │ │ │ │ │ │ │
  • │ │ │ │ │ Flashing └───┘
  • │ │ │ │ │ Membrane
  • │ │ │ └───┘
  • │ │ │
  • │ │ │
  • │ ├──────────────────────────┴─────────────────────────┐ Shelf Angle
  • │ │ Weep Vent (24" o.c.) ▲ Continuous Flashing │
  • └──┴──────────────────────────┴─────────────────────────┘

2-Inch Clear Cavity: Provides an uninterrupted capillary break preventing water clinging to the back of the brick from bridging across to the backup wall. Mortar netting or high-loft drainage mats placed at the bottom of the cavity catch mortar droppings to ensure drainage pathways remain open.

Through-Wall Flashing: High-performance, puncture-resistant sheet membranes—such as 26-gauge Type 304 stainless steel, composite copper-fabric sheets, or 40-mil self-adhering rubberized asphalt—installed continuously above all shelf angles, window heads, foundation sills, and parapets.

8-Inch Vertical Upturn: Flashing must extend up the backup wall a minimum of 8 inches , terminating beneath the self-adhered weather-resistive barrier in a shingle-lap fashion, mechanically sealed with termination bars and continuous sealant.

End Dams: At the ends of window lintels, shelf angles, or horizontal wall discontinuities, the flashing must be turned up 2 to 4 inches into a three-sided, watertight end dam . This prevents water travelling along the flashing from discharging off the ends into the interior wall cavity.

Weep Holes / Weep Vents: Installed in the vertical head joints of the brick course sitting directly on the flashing at a maximum spacing of 24 inches on center for open head joints or plastic cellular weep inserts (and 16 inches o.c. for cotton wicks). Weeps drain gravity runoff to the outdoors while equalizing cavity pressure with exterior gusts.