Study guide
11.4 Forearm Regions of Interest: One-Third, Mid, Ultradistal, and Total
ARRT Bone Densitometry Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Orientation & the ARRT Blueprint
1.1 About the ARRT Bone Densitometry Examination 1.2 Eligibility, Structured Education, and Clinical Experience
2 Chapter 2: Osteoporosis, Bone Biology & Risk Factors
2.1 Osteoporosis: Definitions, Types, and WHO Diagnostic Criteria 2.2 Bone Functions, Structural Anatomy, and Bone Types 2.3 Bone Cells, the Remodeling Cycle, and Calcium Homeostasis 2.4 Risk Factors, Secondary Causes, and Bone-Compromising Medications
3 Chapter 3: Indications, Prevention & Treatment
3.1 The Bone Mass Measurement Act: Covered Indications and Coding 3.2 Prevention: Nutrition, Exercise, Smoking Cessation, and Fall Prevention 3.3 Osteoporosis Drug Therapy: Antiresorptive, Anabolic, and Hormonal Agents
4 Chapter 4: Patient Preparation, Support & Radiation Safety
4.1 Patient Support, Disabilities, Ergonomics, and Transfer Techniques 4.2 Patient Instructions: Explaining the Exam, Dose, Duration, and Motion Control 4.3 Patient History, Contraindications, and Pregnancy Screening 4.4 Scan Preparation: Patient Data Entry, Artifact Removal, and Infection Control 4.5 Radiation Safety in DXA: ALARA, Distance, and Dose Levels
5 Chapter 5: DXA Physics & Instrumentation
5.1 Physical Principles of Dual-Energy X-ray Absorptiometry 5.2 Beam Geometries: Pencil Beam and Fan Beam Systems 5.3 Fan-Beam Geometry: Source–Object–Detector Distances, Magnification, and Centering 5.4 The Scan Analysis Algorithm: Soft Tissue, Bone Edge Detection, BMC, Area, and BMD
6 Chapter 6: Measuring & Reporting Bone Mineral Density
6.1 Statistics for Densitometry: Mean, Standard Deviation, and Coefficient of Variation 6.2 T-Scores, Z-Scores, and Reference Database Selection 6.3 Clinical Indications for BMD Testing and the FRAX Tool 6.4 Vertebral Fracture Assessment and Trabecular Bone Score 6.5 Whole Body DXA, Body Composition, and Pediatric Scanning
7 Chapter 7: Quality Control, Precision & Equipment Management
7.1 Accuracy, Precision, and the Sources of Precision Error 7.2 Daily Quality Control, Phantoms, and Control Charts 7.3 In Vivo Precision Studies and RMS-SD Calculation 7.4 Determining and Applying the Least Significant Change 7.5 Maintenance, Repair, Relocation, Cross-Calibration, and Software Upgrades
8 Chapter 8: DXA Informatics & Data Management
8.1 DXA Informatics, DICOM, PACS, and Data Management
9 Chapter 9: Lumbar Spine DXA
9.1 Lumbar Spine Anatomy, Landmarks, and Regions of Interest 9.2 Lumbar Spine Scan Acquisition and ROI Edge Placement 9.3 Lumbar Spine: Compensating for Body Habitus, Variant Anatomy, Pathology, and Low Bone Density 9.4 Lumbar Spine Positioning: The Leg Block, Centering, and Common Challenges 9.5 Lumbar Spine Problems: Poor Bone Edge Detection and Obscured Intervertebral Spaces 9.6 Lumbar Spine: Variant Anatomy, Fractures, Degenerative Pathology, Calcification, and Surgery 9.7 Lumbar Spine Analysis: Vertebral Exclusion and Reporting Rules 9.8 Lumbar Spine Follow-Up Scans and Rate of Change
10 Chapter 10: Proximal Femur DXA
10.1 Proximal Femur Anatomy, Landmarks, and Regions of Interest 10.2 Femur Selection: Right, Left, and Dual Femur Scanning 10.3 Proximal Femur Scan Parameters and Compensation 10.4 Proximal Femur Positioning: Neck Rotation, Shaft Placement, and Positioning Aids 10.5 Proximal Femur Problems: Ischium, Short Neck, Arthritis, Fracture, and Hardware 10.6 Femoral ROI Analysis: Femoral Neck, Total Hip, and Ward's Area 10.7 Proximal Femur Follow-Up Scans and Rate of Change
11 Chapter 11: Forearm DXA
11.1 Forearm Anatomy, Landmarks, and Adjacent Structures 11.2 Forearm Indications and Side Selection 11.3 Forearm Length Measurement, Scan Parameters, and Positioning 11.4 Forearm Regions of Interest: One-Third, Mid, Ultradistal, and Total 11.5 Forearm Problems: Edge Detection, Artifacts, Low Bone Density, and Joint Disease 11.6 Scan Analysis: Region Placement, Window Level, and Reported Values 11.7 Forearm Follow-Up Scans and Rate of Change
12 Chapter 12: Cross-Site Artifacts & Clinical Integration
12.1 Recognition, Impact, and Management of DXA Artifacts 12.2 Clinical Interpretation, Serial Comparison, and Reporting
11.4 Forearm Regions of Interest: One-Third, Mid, Ultradistal, and Total
Key Takeaways Explain This Topic AI
The 33% or one-third radius is predominantly cortical, roughly 95% compact bone, and is the only forearm region used for WHO diagnostic classification.
The ultradistal radius is trabecular-rich, more responsive to disease and therapy, but has higher precision error and is not used for diagnosis.
The mid-radius lies between the two in composition, and the total radius combines regions into a composite value.
Some systems also report ulna regions and combined radius plus ulna values, none of which are diagnostic sites.
Reporting an osteoporosis diagnosis from an ultradistal or total forearm T-score is incorrect, because those regions have no validated WHO diagnostic threshold.
Last updated: September 2026
11.4 Forearm Regions of Interest: One-Third, Mid, Ultradistal, and Total
Quick Answer: A forearm report typically lists ultradistal , mid-radius , 33% (one-third) radius , and total regions, and on many systems ulna equivalents as well. They differ fundamentally in composition. Only the 33% radius — roughly 95% cortical bone — is used for WHO diagnostic classification . The others are informative but carry no diagnostic threshold.
Why the Forearm Has Multiple Regions
Unlike a vertebral body, the radius is not uniform. Its composition changes continuously from a trabecular-rich metaphysis at the wrist to a thick-walled cortical tube in the shaft. A single "forearm BMD" would average across tissues that behave completely differently, so the scanner segments the bone into regions whose composition is roughly homogeneous.
The regions are defined by position along the measured forearm length , which is why the length measurement in the previous section directly determines what is measured.
The Regions
Region Position Approximate composition Behavior Diagnostic use
Ultradistal (UD) radius Immediately proximal to the distal articular surface Predominantly trabecular , roughly two-thirds trabecular Responsive to disease and therapy; site of Colles fracture Not diagnostic
Mid-radius Between ultradistal and one-third Mixed Intermediate Not diagnostic
33% / one-third radius At one-third of forearm length proximal to the distal end Predominantly cortical , roughly 95% compact bone Stable, highly reproducible, slow to change Diagnostic
Total radius Composite of the measured regions Predominantly cortical overall Composite value Not diagnostic
Ulna regions / radius + ulna Mirror regions on the ulna, or combined Varies Reported on some systems Not diagnostic
The 33% Radius
The 33% radius , also called the one-third radius , is the forearm's diagnostic site, and its two properties explain everything about how it is used.
It is cortical. Roughly 95% compact bone. Cortical bone turns over slowly, which makes it:
Reproducible. Little biological variation between visits and a well-defined dense boundary that edge detection handles reliably. That reproducibility is the main reason it is the diagnostic site.
Insensitive to short-term change. Antiresorptive therapy that raises spine BMD 2–4% in a year may produce no measurable change here for years, which makes it a poor monitoring site.
The site that reveals cortical disease. In primary hyperparathyroidism , where parathyroid hormone preferentially resorbs cortical bone, the one-third radius shows loss that a trabecular-rich spine may hide.
It is defined by distance, not anatomy. The region is placed at a computed point along the bone. Get the forearm length wrong, or apply a different convention at follow-up, and the region lands somewhere else on a bone whose cortical thickness varies continuously.
Diagnostic Status
ISCD includes the 33% radius among the sites valid for WHO diagnostic classification, alongside the PA lumbar spine, femoral neck, and total hip. It is used when the spine and hip cannot be measured or interpreted, in primary hyperparathyroidism, and in patients over the table weight limit.
When a forearm T-score is used for classification, it is the 33% radius T-score — not the ultradistal, not the total, not an average.
The Ultradistal Radius
The ultradistal region sits just proximal to the distal radial articular surface, in the metaphyseal flare. It is trabecular-rich , on the order of two-thirds trabecular bone.
That composition gives it the opposite profile to the one-third site:
More responsive. Early postmenopausal trabecular loss shows here before it shows in the shaft, and therapy effects appear sooner.
Less reproducible. The region lies where the bone is flaring and changing shape rapidly along its length, so small positioning or length differences shift the region onto measurably different bone. Precision error is higher than at the one-third site.
Clinically relevant site. It is where Colles fractures occur, so it is of genuine biomechanical interest.
Not diagnostic. WHO classification thresholds were not validated for it, and its precision does not support a diagnostic threshold.
The ultradistal value is reported and may be commented on, but a patient is not diagnosed with osteoporosis on the basis of an ultradistal T-score of −2.7.
Mid-Radius and Total
Mid-radius falls between the two in composition and behavior and is reported on some systems. It is not a diagnostic site.
Total radius combines the measured regions into a composite. Because the cortical shaft contributes most of the mineral, the total tends to track the cortical regions, but it mixes tissue types and is not diagnostic.
Ulna regions and combined radius-plus-ulna values are reported by some systems. None is a diagnostic site.
Reading a Forearm Report Correctly
Given a report listing all four regions, the interpretive sequence is:
Find the 33% radius T-score. That is the diagnostic value.
Confirm which side was scanned and that it matches any prior study.
Check the entered forearm length against the recorded value from the baseline.
Look at the other regions for pattern information , not for diagnosis. A markedly low ultradistal value with a preserved one-third value suggests trabecular-predominant loss; the reverse suggests cortical-predominant loss, as in hyperparathyroidism.
For serial comparison , compare absolute BMD at the same region against the facility LSC for that region.
The Composition Logic in One Table
- Trabecular-dominant Cortical-dominant
- Forearm region Ultradistal radius 33% radius
- Spine or hip analogue Lumbar spine —
- Turnover Fast Slow
- Responds to therapy Sooner Much later
- Precision Poorer Better
- Lost first in estrogen deficiency Yes No
- Lost first in hyperparathyroidism No Yes
- Diagnostic under WHO criteria No Yes
That table is worth memorizing as a unit, because it explains site selection at every level of this exam: why the spine monitors therapy, why the one-third radius diagnoses hyperparathyroid bone disease, and why a single number never tells the whole skeletal story.