Study guide
9.6 Lumbar Spine: Variant Anatomy, Fractures, Degenerative Pathology, Calcification, and Surgery
ARRT Bone Densitometry Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Orientation & the ARRT Blueprint
1.1 About the ARRT Bone Densitometry Examination 1.2 Eligibility, Structured Education, and Clinical Experience
2 Chapter 2: Osteoporosis, Bone Biology & Risk Factors
2.1 Osteoporosis: Definitions, Types, and WHO Diagnostic Criteria 2.2 Bone Functions, Structural Anatomy, and Bone Types 2.3 Bone Cells, the Remodeling Cycle, and Calcium Homeostasis 2.4 Risk Factors, Secondary Causes, and Bone-Compromising Medications
3 Chapter 3: Indications, Prevention & Treatment
3.1 The Bone Mass Measurement Act: Covered Indications and Coding 3.2 Prevention: Nutrition, Exercise, Smoking Cessation, and Fall Prevention 3.3 Osteoporosis Drug Therapy: Antiresorptive, Anabolic, and Hormonal Agents
4 Chapter 4: Patient Preparation, Support & Radiation Safety
4.1 Patient Support, Disabilities, Ergonomics, and Transfer Techniques 4.2 Patient Instructions: Explaining the Exam, Dose, Duration, and Motion Control 4.3 Patient History, Contraindications, and Pregnancy Screening 4.4 Scan Preparation: Patient Data Entry, Artifact Removal, and Infection Control 4.5 Radiation Safety in DXA: ALARA, Distance, and Dose Levels
5 Chapter 5: DXA Physics & Instrumentation
5.1 Physical Principles of Dual-Energy X-ray Absorptiometry 5.2 Beam Geometries: Pencil Beam and Fan Beam Systems 5.3 Fan-Beam Geometry: Source–Object–Detector Distances, Magnification, and Centering 5.4 The Scan Analysis Algorithm: Soft Tissue, Bone Edge Detection, BMC, Area, and BMD
6 Chapter 6: Measuring & Reporting Bone Mineral Density
6.1 Statistics for Densitometry: Mean, Standard Deviation, and Coefficient of Variation 6.2 T-Scores, Z-Scores, and Reference Database Selection 6.3 Clinical Indications for BMD Testing and the FRAX Tool 6.4 Vertebral Fracture Assessment and Trabecular Bone Score 6.5 Whole Body DXA, Body Composition, and Pediatric Scanning
7 Chapter 7: Quality Control, Precision & Equipment Management
7.1 Accuracy, Precision, and the Sources of Precision Error 7.2 Daily Quality Control, Phantoms, and Control Charts 7.3 In Vivo Precision Studies and RMS-SD Calculation 7.4 Determining and Applying the Least Significant Change 7.5 Maintenance, Repair, Relocation, Cross-Calibration, and Software Upgrades
8 Chapter 8: DXA Informatics & Data Management
8.1 DXA Informatics, DICOM, PACS, and Data Management
9 Chapter 9: Lumbar Spine DXA
9.1 Lumbar Spine Anatomy, Landmarks, and Regions of Interest 9.2 Lumbar Spine Scan Acquisition and ROI Edge Placement 9.3 Lumbar Spine: Compensating for Body Habitus, Variant Anatomy, Pathology, and Low Bone Density 9.4 Lumbar Spine Positioning: The Leg Block, Centering, and Common Challenges 9.5 Lumbar Spine Problems: Poor Bone Edge Detection and Obscured Intervertebral Spaces 9.6 Lumbar Spine: Variant Anatomy, Fractures, Degenerative Pathology, Calcification, and Surgery 9.7 Lumbar Spine Analysis: Vertebral Exclusion and Reporting Rules 9.8 Lumbar Spine Follow-Up Scans and Rate of Change
10 Chapter 10: Proximal Femur DXA
10.1 Proximal Femur Anatomy, Landmarks, and Regions of Interest 10.2 Femur Selection: Right, Left, and Dual Femur Scanning 10.3 Proximal Femur Scan Parameters and Compensation 10.4 Proximal Femur Positioning: Neck Rotation, Shaft Placement, and Positioning Aids 10.5 Proximal Femur Problems: Ischium, Short Neck, Arthritis, Fracture, and Hardware 10.6 Femoral ROI Analysis: Femoral Neck, Total Hip, and Ward's Area 10.7 Proximal Femur Follow-Up Scans and Rate of Change
11 Chapter 11: Forearm DXA
11.1 Forearm Anatomy, Landmarks, and Adjacent Structures 11.2 Forearm Indications and Side Selection 11.3 Forearm Length Measurement, Scan Parameters, and Positioning 11.4 Forearm Regions of Interest: One-Third, Mid, Ultradistal, and Total 11.5 Forearm Problems: Edge Detection, Artifacts, Low Bone Density, and Joint Disease 11.6 Scan Analysis: Region Placement, Window Level, and Reported Values 11.7 Forearm Follow-Up Scans and Rate of Change
12 Chapter 12: Cross-Site Artifacts & Clinical Integration
12.1 Recognition, Impact, and Management of DXA Artifacts 12.2 Clinical Interpretation, Serial Comparison, and Reporting
9.6 Lumbar Spine: Variant Anatomy, Fractures, Degenerative Pathology, Calcification, and Surgery
Key Takeaways Explain This Topic AI
Degenerative disease, compression fracture, sclerosis, osteophytes, and vascular calcification nearly all raise apparent lumbar BMD, which is why the spine can appear normal in an osteoporotic patient.
A vertebral compression fracture concentrates the same mineral into a smaller projected area, so BMD rises and the level must be excluded.
Aortic calcification overlies the lumbar spine on a posteroanterior projection and adds mineral that does not belong to bone.
Laminectomy removes posterior elements and therefore lowers apparent BMD, making it the notable exception to the general upward bias.
Spinal fusion, interbody cages, pedicle screws, and vertebroplasty cement all invalidate the affected levels, which must be excluded and documented.
Last updated: September 2026
9.6 Lumbar Spine: Variant Anatomy, Fractures, Degenerative Pathology, Calcification, and Surgery
Quick Answer: The ARRT outline names five categories of cause for unreliable lumbar spine values: variant anatomy, fractures, pathology (scoliosis, arthritis, osteophytes), aortic and other calcifications, and surgery (biomechanical devices, laminectomy, fusion) . Almost all of them falsely elevate BMD, because dense material adds proportionally more to the numerator (BMC) than to the denominator (area). The one prominent exception is laminectomy , which removes bone and lowers it.
The Governing Arithmetic BMD = BMC Area \text{BMD} = \frac{\text{BMC}}{\text{Area}} BMD = Area BMC
Add dense material that lies within the projected vertebral outline and BMC rises with little or no increase in area: BMD goes up. Compress a vertebra and the same mineral occupies a smaller projected area: BMD goes up. Remove posterior elements surgically and BMC falls within a largely unchanged outline: BMD goes down.
This single relation predicts the direction of every artifact below, which is more useful than memorizing a list.
Variant Anatomy
Transitional vertebrae (lumbarized S1, sacralized L5): the risk is mislabeling, not density. Count from T12 ribs, cross-check the iliac crest, document the convention, and repeat it at follow-up.
Six or four lumbar vertebrae: same handling.
Congenital deformity (hemivertebra, butterfly vertebra, block vertebra): structurally abnormal levels are candidates for exclusion.
Marked leg-length discrepancy or pelvic obliquity: produces apparent scoliosis and asymmetric projection.
Fractures
A vertebral compression fracture is the most consequential single finding, for two reasons.
Clinically , a prevalent vertebral fracture is a strong predictor of future fracture and generally prompts treatment regardless of T-score.
Technically , it corrupts the measurement. Compression reduces vertebral height, so the same mineral projects onto a smaller area. BMD rises, often substantially. A patient with two compression fractures can return a lumbar T-score in the normal range while having severe osteoporosis.
Recognition on the DXA image:
- Reduced vertebral height compared with neighbors (wedge, biconcave, or crush)
- A level whose BMD jumps sharply above its neighbors
- Endplate irregularity or loss of the normal rectangular outline
- Historical height loss in the patient record
Fractured vertebrae are excluded from analysis , and VFA should be considered to identify fractures the PA image does not show.
Degenerative Pathology
- Finding Effect on BMD Why
- Osteophytes Raises Dense new bone forms along vertebral margins and is captured into the ROI
- Facet joint hypertrophy / osteoarthritis Raises Posterior element sclerosis lies within the PA projection
- Endplate sclerosis Raises Dense subchondral bone
- Disc space narrowing with vacuum phenomenon Obscures levels Loss of the lucent band defeats marker placement
- Scoliosis Raises and degrades precision Rotation, asymmetric projection, and associated degenerative change
- Ankylosing spondylitis / DISH Raises markedly Syndesmophytes and ligamentous ossification bridge levels
- Paget disease Raises markedly Rapidly deposited woven bone is dense and mechanically unreliable
The practical consequence is central: degenerative change makes the lumbar spine progressively less reliable with age , which is exactly when osteoporosis becomes prevalent. In an older patient with visible degenerative disease and a discordantly high spine value, the hip is the more trustworthy site, and the report should say so.
Aortic and Other Calcifications
The abdominal aorta lies immediately anterior to the lumbar spine. On a posteroanterior DXA projection, the beam passes through the aorta and then through the vertebral bodies, so calcified aortic plaque is superimposed on the spine and counted as mineral.
Other calcifications with the same effect:
- Calcified lymph nodes
- Renal or ureteral calculi overlying the spine
- Pancreatic or mesenteric calcification
- Calcified uterine fibroids in the lower field
- Retained oral contrast or barium
Aortic calcification is common in exactly the elderly population being scanned, and its contribution cannot be subtracted on a PA image. When it is extensive, the spine value is unreliable and the hip should govern. Lateral spine imaging avoids the aorta but is not valid for WHO diagnostic classification.
Surgery
- Procedure Effect Handling
- Posterior fusion with rods and pedicle screws Massive false elevation from metal Exclude instrumented levels
- Interbody cage False elevation; disc space obliterated Exclude affected levels
- Bone graft / posterolateral fusion mass False elevation; levels fused together Exclude
- Vertebroplasty or kyphoplasty cement Marked false elevation from radiopaque cement Exclude treated levels
Laminectomy False reduction — posterior elements removed Exclude; note the direction differs from other surgical artifacts
Spinal cord stimulator or intrathecal pump False elevation from hardware and leads Exclude affected levels or use the hip
- Aortic stent graft or IVC filter False elevation from metal overlying the spine Usually renders spine unusable
- Prior hip arthroplasty No spine effect, but determines which femur can be scanned Scan the non-operated hip
Laminectomy is the standard exam discriminator precisely because it runs the other way. Removing laminae and spinous processes removes mineral from within the projected vertebral outline, so BMC falls while area changes little, and BMD reads low. Treating a post-laminectomy value as a true measurement over-diagnoses osteoporosis.
Exclusion and Documentation
The exclusion rules themselves are covered in the vertebral exclusion section, but three principles belong here:
Exclude the affected level, not the whole study , when unaffected levels remain evaluable.
Diagnosis cannot rest on fewer than two evaluable vertebrae. When three or more levels are unusable, the spine is not diagnostic and the hip governs.
Document what was excluded and exactly why — "L4 excluded: bridging osteophytes and endplate sclerosis" — because the identical exclusion must be applied at every follow-up. An unrecorded exclusion produces an apparent BMD change at the next visit that is purely analytic.
The Pattern Worth Memorizing
When a patient's spine T-score is substantially higher than the hip T-score in an older adult, suspect artifact: degenerative change, calcification, compression fracture, or hardware. When the spine is substantially lower than the hip in a younger adult, that is often the true early signal, because the trabecular-rich spine loses bone first. The direction of discordance, read against the patient's age, is a fast interpretive check.