Study guide
4.2 Patient Instructions: Explaining the Exam, Dose, Duration, and Motion Control
ARRT Bone Densitometry Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Orientation & the ARRT Blueprint
1.1 About the ARRT Bone Densitometry Examination 1.2 Eligibility, Structured Education, and Clinical Experience
2 Chapter 2: Osteoporosis, Bone Biology & Risk Factors
2.1 Osteoporosis: Definitions, Types, and WHO Diagnostic Criteria 2.2 Bone Functions, Structural Anatomy, and Bone Types 2.3 Bone Cells, the Remodeling Cycle, and Calcium Homeostasis 2.4 Risk Factors, Secondary Causes, and Bone-Compromising Medications
3 Chapter 3: Indications, Prevention & Treatment
3.1 The Bone Mass Measurement Act: Covered Indications and Coding 3.2 Prevention: Nutrition, Exercise, Smoking Cessation, and Fall Prevention 3.3 Osteoporosis Drug Therapy: Antiresorptive, Anabolic, and Hormonal Agents
4 Chapter 4: Patient Preparation, Support & Radiation Safety
4.1 Patient Support, Disabilities, Ergonomics, and Transfer Techniques 4.2 Patient Instructions: Explaining the Exam, Dose, Duration, and Motion Control 4.3 Patient History, Contraindications, and Pregnancy Screening 4.4 Scan Preparation: Patient Data Entry, Artifact Removal, and Infection Control 4.5 Radiation Safety in DXA: ALARA, Distance, and Dose Levels
5 Chapter 5: DXA Physics & Instrumentation
5.1 Physical Principles of Dual-Energy X-ray Absorptiometry 5.2 Beam Geometries: Pencil Beam and Fan Beam Systems 5.3 Fan-Beam Geometry: Source–Object–Detector Distances, Magnification, and Centering 5.4 The Scan Analysis Algorithm: Soft Tissue, Bone Edge Detection, BMC, Area, and BMD
6 Chapter 6: Measuring & Reporting Bone Mineral Density
6.1 Statistics for Densitometry: Mean, Standard Deviation, and Coefficient of Variation 6.2 T-Scores, Z-Scores, and Reference Database Selection 6.3 Clinical Indications for BMD Testing and the FRAX Tool 6.4 Vertebral Fracture Assessment and Trabecular Bone Score 6.5 Whole Body DXA, Body Composition, and Pediatric Scanning
7 Chapter 7: Quality Control, Precision & Equipment Management
7.1 Accuracy, Precision, and the Sources of Precision Error 7.2 Daily Quality Control, Phantoms, and Control Charts 7.3 In Vivo Precision Studies and RMS-SD Calculation 7.4 Determining and Applying the Least Significant Change 7.5 Maintenance, Repair, Relocation, Cross-Calibration, and Software Upgrades
8 Chapter 8: DXA Informatics & Data Management
8.1 DXA Informatics, DICOM, PACS, and Data Management
9 Chapter 9: Lumbar Spine DXA
9.1 Lumbar Spine Anatomy, Landmarks, and Regions of Interest 9.2 Lumbar Spine Scan Acquisition and ROI Edge Placement 9.3 Lumbar Spine: Compensating for Body Habitus, Variant Anatomy, Pathology, and Low Bone Density 9.4 Lumbar Spine Positioning: The Leg Block, Centering, and Common Challenges 9.5 Lumbar Spine Problems: Poor Bone Edge Detection and Obscured Intervertebral Spaces 9.6 Lumbar Spine: Variant Anatomy, Fractures, Degenerative Pathology, Calcification, and Surgery 9.7 Lumbar Spine Analysis: Vertebral Exclusion and Reporting Rules 9.8 Lumbar Spine Follow-Up Scans and Rate of Change
10 Chapter 10: Proximal Femur DXA
10.1 Proximal Femur Anatomy, Landmarks, and Regions of Interest 10.2 Femur Selection: Right, Left, and Dual Femur Scanning 10.3 Proximal Femur Scan Parameters and Compensation 10.4 Proximal Femur Positioning: Neck Rotation, Shaft Placement, and Positioning Aids 10.5 Proximal Femur Problems: Ischium, Short Neck, Arthritis, Fracture, and Hardware 10.6 Femoral ROI Analysis: Femoral Neck, Total Hip, and Ward's Area 10.7 Proximal Femur Follow-Up Scans and Rate of Change
11 Chapter 11: Forearm DXA
11.1 Forearm Anatomy, Landmarks, and Adjacent Structures 11.2 Forearm Indications and Side Selection 11.3 Forearm Length Measurement, Scan Parameters, and Positioning 11.4 Forearm Regions of Interest: One-Third, Mid, Ultradistal, and Total 11.5 Forearm Problems: Edge Detection, Artifacts, Low Bone Density, and Joint Disease 11.6 Scan Analysis: Region Placement, Window Level, and Reported Values 11.7 Forearm Follow-Up Scans and Rate of Change
12 Chapter 12: Cross-Site Artifacts & Clinical Integration
12.1 Recognition, Impact, and Management of DXA Artifacts 12.2 Clinical Interpretation, Serial Comparison, and Reporting
4.2 Patient Instructions: Explaining the Exam, Dose, Duration, and Motion Control
Key Takeaways Explain This Topic AI
Explaining the procedure before positioning reduces motion artifact more effectively than any repositioning aid.
A standard axial DXA study acquires two sites, spine and hip, with each acquisition typically lasting 30 seconds to 2 minutes depending on scanner mode and patient size.
The 2027 ARRT content specifications add explanation of radiation dose and effects to the patient-instruction topic, so technologists must be able to state DXA dose in comparative everyday terms.
DXA does not require breath-hold; patients breathe quietly and normally, because forced breath-holding often produces more chest and abdominal movement than quiet respiration.
Patients should be told that the scanner arm passes over them without touching, that the table is open rather than a tunnel, and that they may speak if they need to stop.
Last updated: September 2026
4.2 Patient Instructions: Explaining the Exam, Dose, Duration, and Motion Control
Quick Answer: Patient instruction is a quality-control step, not a courtesy. Tell the patient what DXA measures, how many scans will be acquired and roughly how long each takes, that the scanner arm passes over without touching them and the table is open rather than enclosed, that they should breathe quietly rather than hold their breath, and that stillness is the one thing only they can supply. The ARRT specifications effective January 2027 add explanation of radiation dose and effects to this topic.
Instruction as Artifact Prevention
Every repositioning aid in the room addresses geometry. None of them addresses the patient's understanding of what is about to happen — and an anxious patient who does not know whether the machine will touch them will move. A 60-second explanation before positioning prevents more repeat acquisitions than any positioner.
Explaining What DXA Is
Use plain language and anchor to what the patient already knows:
"This is a bone density scan. It uses a very low-dose x-ray to measure how much mineral is in your bones. It doesn't go into a tunnel — the table is open and this arm moves slowly over you without touching you. It doesn't hurt, and there's no injection and no dye."
Points worth including because patients regularly assume otherwise:
It is not an MRI. Patients who have been told "bone scan" often arrive expecting a tunnel or claustrophobic enclosure.
It is not a nuclear medicine bone scan. The phrase "bone scan" genuinely refers to a different study involving a radiopharmaceutical injection. Clarify early; it is also relevant because recent radiopharmaceutical administration is a DXA contraindication.
Nothing is injected and no contrast is given.
The arm does not touch you. Patients tense when a moving gantry approaches.
You can tell me if you need to stop. Patients who believe they cannot interrupt will endure and move.
Number and Duration of Scans
State this explicitly. "We'll do two scans" is very different information from "this will take about twenty minutes," and patients settle better when they know how many discrete events to expect.
- Acquisition Typical scan time
- PA lumbar spine Roughly 30 seconds to 2 minutes depending on mode and habitus
- Proximal femur (single) Roughly 30 seconds to 2 minutes
- Dual femur Approximately double a single femur, plus repositioning
- Forearm Typically under 1 minute
- Lateral VFA Roughly 10 to 30 seconds on fan-beam systems
- Total appointment Commonly 15 to 30 minutes including positioning and analysis
Two variables the patient does not see but that change these numbers: scanner mode (fast-array modes are shorter but noisier; high-definition modes are longer) and body habitus (larger patients require slower scanning for adequate photon statistics). Pencil-beam systems are substantially slower than fan-beam systems for the same site.
A practical script that works: "There will be two scans. The first one, on your lower back, takes about a minute. Then I'll reposition your leg and do your hip, which takes about the same. In between, you can relax, but please don't shift on the table."
Explaining Radiation Dose and Effects
The 2027 specifications add this explicitly, and it is a skill worth having regardless. Patients rarely evaluate microsieverts; they evaluate comparisons.
Comparative framing: a central DXA scan delivers a dose on the order of a small fraction of a chest x-ray, and roughly a day or less of natural background radiation.
Modality framing: "far less than a CT scan or a mammogram."
Honest framing: DXA uses ionizing radiation. It is not zero. The dose is low, the study is justified by an order, and it is why we ask about pregnancy.
What to avoid: claiming DXA involves "no radiation," which is false and destroys credibility if the patient later reads otherwise; quoting stochastic risk estimates, which technologists are not positioned to individualize; and dismissing the question. If a patient presses for detail beyond a general comparison, refer to the radiologist or the ordering provider.
The pregnancy conversation follows the same logic: it is asked of every patient of childbearing potential, it is not an accusation, and a possible pregnancy means the study is deferred pending the ordering provider's decision rather than performed with shielding.
Motion and Breathing Requirements
This is the instruction that most directly determines whether the scan is usable.
Motion. DXA builds the image line by line as the scan arm sweeps. Movement during the sweep does not blur uniformly the way it does in a single radiographic exposure — it displaces part of the image relative to the rest, producing stepped or discontinuous bone edges that defeat edge-detection algorithms and corrupt both BMC and area. Tell the patient plainly: "The most important thing is to stay completely still until I tell you we're done." Then tell them when it is done ; patients often move while the arm is still acquiring the final lines.
Breathing. DXA does not require a breath-hold. Patients breathe quietly and normally . This is counterintuitive for patients accustomed to chest radiography, and they will often hold their breath unprompted, then take a compensatory deep breath mid-acquisition — which is worse than quiet tidal breathing. Say so directly: "Just breathe normally. You don't need to hold your breath."
Quiet respiration matters most for the lumbar spine, where diaphragmatic excursion moves the upper lumbar region, and for VFA acquisitions. Shallow, regular breathing minimizes excursion; deep breaths and speech do not.
Talking. Ask questions before the acquisition starts. A patient answering a question mid-scan has moved their chest, abdomen, and often their pelvis.
Instructions Before the Appointment
Pre-appointment instruction prevents artifacts that cannot be fixed in the room:
Wear clothing without metal — no zippers, snaps, buttons, underwire, grommets, or metallic thread — across the lower back, abdomen, and hips.
Stop oral calcium supplements for the interval specified by the facility, commonly 24 to 48 hours, because undissolved tablets overlie the lumbar spine.
Report recent contrast or nuclear medicine studies. Barium, iodinated contrast, and radiopharmaceuticals invalidate the scan; the study is typically deferred for a period specified by facility protocol.
Bring prior outside DXA reports and images , including the device manufacturer and model, because serial comparison across different systems is invalid without cross-calibration.
Eating and drinking are unrestricted apart from the calcium supplement rule; no fasting is required.