Study guide

10.6 Femoral ROI Analysis: Femoral Neck, Total Hip, and Ward's Area

ARRT Bone Densitometry Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Orientation & the ARRT Blueprint

1.1 About the ARRT Bone Densitometry Examination 1.2 Eligibility, Structured Education, and Clinical Experience

2 Chapter 2: Osteoporosis, Bone Biology & Risk Factors

2.1 Osteoporosis: Definitions, Types, and WHO Diagnostic Criteria 2.2 Bone Functions, Structural Anatomy, and Bone Types 2.3 Bone Cells, the Remodeling Cycle, and Calcium Homeostasis 2.4 Risk Factors, Secondary Causes, and Bone-Compromising Medications

3 Chapter 3: Indications, Prevention & Treatment

3.1 The Bone Mass Measurement Act: Covered Indications and Coding 3.2 Prevention: Nutrition, Exercise, Smoking Cessation, and Fall Prevention 3.3 Osteoporosis Drug Therapy: Antiresorptive, Anabolic, and Hormonal Agents

4 Chapter 4: Patient Preparation, Support & Radiation Safety

4.1 Patient Support, Disabilities, Ergonomics, and Transfer Techniques 4.2 Patient Instructions: Explaining the Exam, Dose, Duration, and Motion Control 4.3 Patient History, Contraindications, and Pregnancy Screening 4.4 Scan Preparation: Patient Data Entry, Artifact Removal, and Infection Control 4.5 Radiation Safety in DXA: ALARA, Distance, and Dose Levels

5 Chapter 5: DXA Physics & Instrumentation

5.1 Physical Principles of Dual-Energy X-ray Absorptiometry 5.2 Beam Geometries: Pencil Beam and Fan Beam Systems 5.3 Fan-Beam Geometry: Source–Object–Detector Distances, Magnification, and Centering 5.4 The Scan Analysis Algorithm: Soft Tissue, Bone Edge Detection, BMC, Area, and BMD

6 Chapter 6: Measuring & Reporting Bone Mineral Density

6.1 Statistics for Densitometry: Mean, Standard Deviation, and Coefficient of Variation 6.2 T-Scores, Z-Scores, and Reference Database Selection 6.3 Clinical Indications for BMD Testing and the FRAX Tool 6.4 Vertebral Fracture Assessment and Trabecular Bone Score 6.5 Whole Body DXA, Body Composition, and Pediatric Scanning

7 Chapter 7: Quality Control, Precision & Equipment Management

7.1 Accuracy, Precision, and the Sources of Precision Error 7.2 Daily Quality Control, Phantoms, and Control Charts 7.3 In Vivo Precision Studies and RMS-SD Calculation 7.4 Determining and Applying the Least Significant Change 7.5 Maintenance, Repair, Relocation, Cross-Calibration, and Software Upgrades

8 Chapter 8: DXA Informatics & Data Management

8.1 DXA Informatics, DICOM, PACS, and Data Management

9 Chapter 9: Lumbar Spine DXA

9.1 Lumbar Spine Anatomy, Landmarks, and Regions of Interest 9.2 Lumbar Spine Scan Acquisition and ROI Edge Placement 9.3 Lumbar Spine: Compensating for Body Habitus, Variant Anatomy, Pathology, and Low Bone Density 9.4 Lumbar Spine Positioning: The Leg Block, Centering, and Common Challenges 9.5 Lumbar Spine Problems: Poor Bone Edge Detection and Obscured Intervertebral Spaces 9.6 Lumbar Spine: Variant Anatomy, Fractures, Degenerative Pathology, Calcification, and Surgery 9.7 Lumbar Spine Analysis: Vertebral Exclusion and Reporting Rules 9.8 Lumbar Spine Follow-Up Scans and Rate of Change

10 Chapter 10: Proximal Femur DXA

10.1 Proximal Femur Anatomy, Landmarks, and Regions of Interest 10.2 Femur Selection: Right, Left, and Dual Femur Scanning 10.3 Proximal Femur Scan Parameters and Compensation 10.4 Proximal Femur Positioning: Neck Rotation, Shaft Placement, and Positioning Aids 10.5 Proximal Femur Problems: Ischium, Short Neck, Arthritis, Fracture, and Hardware 10.6 Femoral ROI Analysis: Femoral Neck, Total Hip, and Ward's Area 10.7 Proximal Femur Follow-Up Scans and Rate of Change

11 Chapter 11: Forearm DXA

11.1 Forearm Anatomy, Landmarks, and Adjacent Structures 11.2 Forearm Indications and Side Selection 11.3 Forearm Length Measurement, Scan Parameters, and Positioning 11.4 Forearm Regions of Interest: One-Third, Mid, Ultradistal, and Total 11.5 Forearm Problems: Edge Detection, Artifacts, Low Bone Density, and Joint Disease 11.6 Scan Analysis: Region Placement, Window Level, and Reported Values 11.7 Forearm Follow-Up Scans and Rate of Change

12 Chapter 12: Cross-Site Artifacts & Clinical Integration

12.1 Recognition, Impact, and Management of DXA Artifacts 12.2 Clinical Interpretation, Serial Comparison, and Reporting

10.6 Femoral ROI Analysis: Femoral Neck, Total Hip, and Ward's Area

Key Takeaways Explain This Topic AI

Dual-energy X-ray absorptiometry evaluates five standard proximal femur regions of interest (ROIs): Femoral Neck, Total Hip, Trochanteric region, Intertrochanteric region, and Ward's area.

Under official International Society for Clinical Densitometry (ISCD) positions, diagnosis of osteoporosis in adults must be based exclusively on either the Femoral Neck or Total Hip, selecting whichever site displays the lower T-score.

Ward's area represents an algorithm-derived mathematical density minimum box that exhibits poor precision, high coefficient of variation (>3.0%–4.5%), and systematically overdiagnoses osteoporosis; it must never be used for clinical diagnosis or treatment monitoring.

The trochanteric and intertrochanteric sub-regions must never be used alone to establish a clinical diagnosis or make therapeutic decisions, serving valid clinical utility only as components of the composite Total Hip ROI.

Quality placement criteria require that the femoral neck box is centered across the narrowest dimension of the neck perpendicular to the neck axis, completely excluding the acetabular rim medially and the greater trochanter laterally.

Last updated: September 2026

10.6 Femoral ROI Analysis: Femoral Neck, Total Hip, and Ward's Area

Quick Answer: Central DXA generates five proximal femur regions of interest (ROIs): Femoral Neck, Total Hip, Trochanteric, Intertrochanteric, and Ward's area. Under ISCD positions, adult osteoporosis diagnosis must use either the Femoral Neck or Total Hip, selecting whichever T-score is lower. Ward's area is an algorithm-derived search box identifying minimum pixel density; it has poor precision and systematically overdiagnoses osteoporosis, making it strictly prohibited for clinical diagnosis. Trochanteric and intertrochanteric sub-regions must not be used alone for diagnosis. Quality criteria require placing the neck box across the narrowest dimension of the femoral neck perpendicular to the neck axis, completely clear of the acetabulum and greater trochanter.

Standard Proximal Femur Regions of Interest (ROIs)

Densitometry software automatically identifies anatomical landmarks on the proximal femur and places specific regions of interest (ROIs) to calculate bone mineral content (BMC), area, and areal bone mineral density (BMD):

Femoral Neck ROI: Rectangular region placed across the narrowest constriction of the femoral neck, with borders perpendicular to the neck axis. It measures a critical weight-bearing segment containing ~25%–30% trabecular and ~70%–75% cortical bone.

Total Hip (Total Proximal Femur) ROI: Composite region integrating three sub-regions: femoral neck, trochanteric region, and intertrochanteric region. It excludes the femoral head, acetabulum, and shaft below the lesser trochanter. Enclosing a large area (~30–45 cm²), it provides the lowest measurement variability and greatest precision in hip densitometry.

Trochanteric Sub-Region: Encompasses the greater trochanter (~50% trabecular bone). It responds dynamically to therapies, but soft-tissue variability limits precision.

Intertrochanteric Sub-Region: Diagonal band between the neck and the lower margin of the lesser trochanter, composed of mixed trabecular and cortical bone.

Ward's Area (Ward's Triangle): Small square search ROI (~1.0 cm × 1.0 cm) locating the lowest-density pixel cluster. It is an algorithmic calculation rather than a fixed anatomical structure.

  • Region of Interest (ROI) Anatomical Scope Precision (% CV) ISCD Diagnostic Validity Clinical Role
  • Femoral Neck Narrowest neck waist 1.5%–2.0% Valid for diagnosis Baseline diagnosis & hip fracture prediction

Total Hip Composite: Neck + Trochanter + Intertrochanter 1.0%–1.5% Valid for diagnosis Preferred site for longitudinal monitoring

  • Trochanteric Greater trochanter (~50% trabecular) 2.0%–2.5% Invalid alone Component of composite Total Hip ROI
  • Intertrochanteric Band between neck and shaft 1.5%–2.0% Invalid alone Component of composite Total Hip ROI
  • Ward's Area Lowest density search box >3.0%–4.5% Strictly prohibited Excluded from diagnosis & monitoring
  • ISCD Official Positions on Diagnostic Selection

The ISCD establishes explicit rules governing adult diagnostic classification (postmenopausal women and men aged ≥50):

Diagnostic Selection Rules

Core Diagnostic Rule: Diagnosis of osteoporosis in adults must use either the Femoral Neck or the Total Hip , selecting whichever site displays the lower T-score .

If femoral neck T-score is -2.6 and total hip T-score is -2.1, diagnosis is osteoporosis based on the femoral neck.

If femoral neck T-score is -1.7 and total hip T-score is -2.7, diagnosis is osteoporosis based on the total hip.

Both sites are validated against the female NHANES III reference database.

Longitudinal Monitoring Preference: While either site establishes diagnosis, the Total Hip ROI is preferred for longitudinal monitoring because its large area yields superior precision (CV ~1.0%–1.5%) and the smallest Least Significant Change (LSC).

Explicit Diagnostic Exclusions: Ward's Area and Sub-Regions

ARRT specifications emphasize regions that must never be used alone for clinical diagnosis:

Why Ward's Area is Prohibited

Under ISCD positions, Ward's area must never be used for diagnosis or monitoring :

Algorithmic Artifact: Ward's area is an automated search calculation seeking minimum density pixels. Its T-scores run 1.0 to 1.5 standard deviations below the femoral neck in normal individuals.

Systematic Overdiagnosis: Relying on Ward's area creates severe false-positive overdiagnosis of osteoporosis in healthy adults, leading to inappropriate drug therapy.

Poor Precision: Small shifts in leg rotation cause the algorithm to jump across different pixels, producing unacceptably high precision error (>3.0%–4.5%).

Trochanteric and Intertrochanteric Sub-Regions

Individual trochanteric and intertrochanteric sub-regions must not be used alone to diagnose osteoporosis. They are valid only as components of the composite Total Hip ROI.

Quality Criteria and Verification of the Femoral Neck Box

Automated ROI placement requires visual inspection and manual adjustment:

Neck Axis Alignment: The software places a midline along the femoral neck; the neck box long borders must sit perpendicular to this axis.

Narrowest Constriction: The box must be centered over the narrowest waist of the femoral neck.

Clearance from Acetabular Rim: The medial border must never overlap the acetabular rim or ischium. Overlapping pelvic cortical bone falsely elevates BMC and BMD , masking osteoporosis.

Clearance from Greater Trochanter: The lateral border must not touch the greater trochanter cortex, which falsely elevates femoral neck BMD.

Software Midline Bisector: The software midline must accurately bisect the femoral shaft and femoral head centers.

  • Verification Checkpoint Technical Standard Consequence of Error
  • Medial Neck Margin Clear of acetabular rim Pelvic overlap falsely elevates BMD
  • Lateral Neck Margin Clear of greater trochanter Trochanter overlap falsely elevates BMD
  • Neck Box Axis Perpendicular to neck axis Skewed angle distorts area and BMD
  • Neck Constriction Centered on narrowest waist Off-center placement samples thicker bone
  • Midline Bisector Bisects shaft and head centers Distorts sub-region boundaries
  • Window Level During Femur Analysis

The femur is the site where windowing earns its keep, because its critical boundaries are bone against bone : the femoral neck against the ischium medially and against the greater trochanter laterally. At default display settings those interfaces can be invisible, particularly in low bone density. Adjusting window level and window width separates them visually so the neck box can be verified and repositioned. As everywhere else, windowing changes only the display — not BMC, area, or BMD. Window level is a named scan-analysis topic in the ARRT content specifications effective January 1, 2027, and is described in full in the scan analysis section of the forearm chapter.

Reported Values and Graphical Displays

A proximal femur report lists each region separately — femoral neck, trochanter, intertrochanteric, Ward's area, and the composite total hip — and for each gives BMC (g) , projected area (cm²) , BMD (g/cm²) , T-score , Z-score , and percent of the young-adult and age-matched reference means .

Two plausibility checks belong to this site specifically. Ward's area should be the lowest value on the report; if it is not, the analysis has gone wrong somewhere. And the femoral neck is normally lower than the total hip , because the total hip dilutes the neck with the denser intertrochanteric region — a femoral neck reading higher than the total hip suggests the neck box has captured ischium or trochanteric cortex.

The graphical displays accompanying the numbers are a reference-curve plot positioning the patient against age-related normative curves with T-score bands, and, once a prior study exists, a serial trend plot of BMD over time. Both are interpretive aids: classification comes from the lower of femoral neck and total hip, and significance of serial change comes from absolute BMD difference against the facility least significant change — never from the visual slope of a trend line. A serial plot that silently joins a right hip to a left hip, or points from two different scanners, will draw a perfectly convincing line through incomparable data.

Loading diagram... Proximal Femur ROI Anatomy & Diagnostic Decision Hierarchy