Study guide

10.1 Proximal Femur Anatomy, Landmarks, and Regions of Interest

ARRT Bone Densitometry Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Orientation & the ARRT Blueprint

1.1 About the ARRT Bone Densitometry Examination 1.2 Eligibility, Structured Education, and Clinical Experience

2 Chapter 2: Osteoporosis, Bone Biology & Risk Factors

2.1 Osteoporosis: Definitions, Types, and WHO Diagnostic Criteria 2.2 Bone Functions, Structural Anatomy, and Bone Types 2.3 Bone Cells, the Remodeling Cycle, and Calcium Homeostasis 2.4 Risk Factors, Secondary Causes, and Bone-Compromising Medications

3 Chapter 3: Indications, Prevention & Treatment

3.1 The Bone Mass Measurement Act: Covered Indications and Coding 3.2 Prevention: Nutrition, Exercise, Smoking Cessation, and Fall Prevention 3.3 Osteoporosis Drug Therapy: Antiresorptive, Anabolic, and Hormonal Agents

4 Chapter 4: Patient Preparation, Support & Radiation Safety

4.1 Patient Support, Disabilities, Ergonomics, and Transfer Techniques 4.2 Patient Instructions: Explaining the Exam, Dose, Duration, and Motion Control 4.3 Patient History, Contraindications, and Pregnancy Screening 4.4 Scan Preparation: Patient Data Entry, Artifact Removal, and Infection Control 4.5 Radiation Safety in DXA: ALARA, Distance, and Dose Levels

5 Chapter 5: DXA Physics & Instrumentation

5.1 Physical Principles of Dual-Energy X-ray Absorptiometry 5.2 Beam Geometries: Pencil Beam and Fan Beam Systems 5.3 Fan-Beam Geometry: Source–Object–Detector Distances, Magnification, and Centering 5.4 The Scan Analysis Algorithm: Soft Tissue, Bone Edge Detection, BMC, Area, and BMD

6 Chapter 6: Measuring & Reporting Bone Mineral Density

6.1 Statistics for Densitometry: Mean, Standard Deviation, and Coefficient of Variation 6.2 T-Scores, Z-Scores, and Reference Database Selection 6.3 Clinical Indications for BMD Testing and the FRAX Tool 6.4 Vertebral Fracture Assessment and Trabecular Bone Score 6.5 Whole Body DXA, Body Composition, and Pediatric Scanning

7 Chapter 7: Quality Control, Precision & Equipment Management

7.1 Accuracy, Precision, and the Sources of Precision Error 7.2 Daily Quality Control, Phantoms, and Control Charts 7.3 In Vivo Precision Studies and RMS-SD Calculation 7.4 Determining and Applying the Least Significant Change 7.5 Maintenance, Repair, Relocation, Cross-Calibration, and Software Upgrades

8 Chapter 8: DXA Informatics & Data Management

8.1 DXA Informatics, DICOM, PACS, and Data Management

9 Chapter 9: Lumbar Spine DXA

9.1 Lumbar Spine Anatomy, Landmarks, and Regions of Interest 9.2 Lumbar Spine Scan Acquisition and ROI Edge Placement 9.3 Lumbar Spine: Compensating for Body Habitus, Variant Anatomy, Pathology, and Low Bone Density 9.4 Lumbar Spine Positioning: The Leg Block, Centering, and Common Challenges 9.5 Lumbar Spine Problems: Poor Bone Edge Detection and Obscured Intervertebral Spaces 9.6 Lumbar Spine: Variant Anatomy, Fractures, Degenerative Pathology, Calcification, and Surgery 9.7 Lumbar Spine Analysis: Vertebral Exclusion and Reporting Rules 9.8 Lumbar Spine Follow-Up Scans and Rate of Change

10 Chapter 10: Proximal Femur DXA

10.1 Proximal Femur Anatomy, Landmarks, and Regions of Interest 10.2 Femur Selection: Right, Left, and Dual Femur Scanning 10.3 Proximal Femur Scan Parameters and Compensation 10.4 Proximal Femur Positioning: Neck Rotation, Shaft Placement, and Positioning Aids 10.5 Proximal Femur Problems: Ischium, Short Neck, Arthritis, Fracture, and Hardware 10.6 Femoral ROI Analysis: Femoral Neck, Total Hip, and Ward's Area 10.7 Proximal Femur Follow-Up Scans and Rate of Change

11 Chapter 11: Forearm DXA

11.1 Forearm Anatomy, Landmarks, and Adjacent Structures 11.2 Forearm Indications and Side Selection 11.3 Forearm Length Measurement, Scan Parameters, and Positioning 11.4 Forearm Regions of Interest: One-Third, Mid, Ultradistal, and Total 11.5 Forearm Problems: Edge Detection, Artifacts, Low Bone Density, and Joint Disease 11.6 Scan Analysis: Region Placement, Window Level, and Reported Values 11.7 Forearm Follow-Up Scans and Rate of Change

12 Chapter 12: Cross-Site Artifacts & Clinical Integration

12.1 Recognition, Impact, and Management of DXA Artifacts 12.2 Clinical Interpretation, Serial Comparison, and Reporting

10.1 Proximal Femur Anatomy, Landmarks, and Regions of Interest

Key Takeaways Explain This Topic AI

The proximal femur comprises the femoral head, femoral neck, greater trochanter, lesser trochanter, intertrochanteric region, and proximal femoral shaft, each characterized by distinct cortical and trabecular ratios.

The femoral neck consists of mixed trabecular (~25%–30%) and cortical (~70%–75%) bone, whereas the trochanteric region is predominantly trabecular (~50%), the femoral shaft is predominantly cortical (>90%), and Ward's area forms an anatomical trigone of low trabecular density at the convergence of compressive and tensile arches.

By clinical convention, the patient's left hip is scanned routinely unless contraindicated by previous fracture, total or hemi-arthroplasty prosthesis, severe degenerative osteoarthritis, or indwelling metallic orthopedic hardware.

Standardized hip positioning requires 15° to 25° of femoral abduction to align the femoral shaft parallel to the longitudinal table axis, combined with 15° to 25° of internal rotation using a dedicated positioning fixture.

Internal rotation of 15° to 25° counteracts natural femoral anteversion (10°–15°), brings the femoral neck parallel to the tabletop, elongates the neck to maximum true anatomical length, profiles the greater trochanter laterally, and conceals or minimizes the lesser trochanter; inadequate rotation foreshortens the neck and artificially elevates bone mineral density (BMD).

Last updated: September 2026

10.1 Proximal Femur Anatomy, Landmarks, and Regions of Interest

Quick Answer: The proximal femur comprises the femoral head, femoral neck, greater trochanter, lesser trochanter, intertrochanteric region, and proximal shaft. ISCD states that BMD may be measured at either hip; many facilities adopt a single default side for consistency, and whichever side is chosen becomes that patient’s side for all follow-up unless contraindicated by prior fracture, arthroplasty, or metallic hardware. Densitometry requires the patient supine, leg abducted 15°–25° to position the shaft parallel to the scan field, and internally rotated 15°–25° using a manufacturer foot brace. Internal rotation neutralizes 10°–15° natural femoral anteversion, aligns the neck parallel to the tabletop, maximizes projected neck length, profiles the greater trochanter, and minimizes the lesser trochanter. Inadequate internal rotation foreshortens the neck and profiles the lesser trochanter, artificially elevating bone mineral density (BMD).

Gross and Radiologic Anatomy of the Proximal Femur

The proximal femur is a primary weight-bearing central DXA site. Technologists must master its gross landmarks and radiographic projections:

Femoral Head: Smooth, spherical articular surface articulating with the pelvic acetabulum. Excluded from diagnostic regions of interest (ROIs) because acetabular overlap and joint calcifications distort areal density.

Femoral Neck: Constricted cylindrical bridge connecting the head to the shaft (~125°–130° neck-shaft angle; 10°–15° anterior anteversion). Histologically, it contains mixed trabecular (~25%–30%) and cortical (~70%–75%) bone, providing tensile and compressive strength.

Greater Trochanter: Massive lateral prominence serving as the insertion for hip abductors (gluteus medius and minimus). Predominantly trabecular (~50% trabecular, 50% cortical).

Lesser Trochanter: Conical posteromedial prominence where the iliopsoas tendon inserts. Radiographically, it is the key indicator of rotational alignment; it should appear as a tiny profile or be obscured completely.

Intertrochanteric Region: Diagonal osseous expanse between greater and lesser trochanters, composed of mixed trabecular and cortical bone.

Proximal Femoral Shaft: Diaphyseal segment distal to the lesser trochanter, composed predominantly of dense compact cortical bone (>90% cortical).

Ward's Area (Ward's Triangle): A focal trigone of low trabecular density in the central femoral neck formed at the intersection of principal compressive and tensile trabecular arches.

  • Anatomical Region Predominant Bone Composition Biomechanical Function DXA Diagnostic Role
  • Femoral Head Mixed (~30% trabecular, ~70% cortical) Coxofemoral articulation Excluded from analysis
  • Femoral Neck ~25%–30% Trabecular, ~70%–75% Cortical Resists bending/shear forces Primary diagnostic ROI
  • Greater Trochanter ~50% Trabecular, ~50% Cortical Hip abductor attachment Lateral boundary of Total Hip
  • Lesser Trochanter Cortical shell, marrow core Iliopsoas insertion Marker of rotational positioning
  • Intertrochanteric ~50% Trabecular, ~50% Cortical Distributes axial loads Component of Total Hip ROI
  • Femoral Shaft >90% Cortical Rigid weight-bearing pillar Alignment reference for shaft axis
  • Ward's Area Lowest trabecular density Trabecular arch intersection Mathematical nadir; excluded from diagnosis
  • Patient Positioning Protocols

Central hip densitometry demands standardized patient setup with the patient supine and pelvis level:

Hip Side Selection

By convention, the left hip is scanned routinely unless contraindicated by:

Prior Hip Fracture: Callus and structural deformity falsely alter BMD. Scan the contralateral hip.

Total Hip Arthroplasty (THA) or Hemiarthroplasty: Prosthetic metal completely attenuates the beam. Scan the contralateral hip.

Severe Local Osteoarthritis: Joint sclerosis and osteophytes falsely elevate BMD. Scan the opposite hip.

Indwelling Hardware / Pinning: Orthopedic screws invalidate the operative side.

Critical Positioning Maneuvers

Femoral Abduction (15° to 25°): The technologist abducts the leg 15° to 25° from the anatomical midline. This aligns the femoral shaft straight and parallel to the longitudinal edge of the table and scan field, preventing the femoral neck from crowding into the acetabulum.

Internal Rotation (15° to 25°): The lower extremity must be internally rotated 15° to 25° from the hip joint and secured with a manufacturer-supplied positioning foot brace / abduction wedge.

Biomechanical Purpose: Neutralizes natural 10°–15° femoral anteversion.

Radiologic Benchmarks: Aligns the femoral neck parallel to the table surface and detector, elongates the neck to maximum true anatomical length, profiles the greater trochanter laterally, and conceals or minimizes the lesser trochanter.

Positioning Error Consequence: Inadequate internal rotation leaves the hip externally rotated, projecting a foreshortened neck and a large, prominent lesser trochanter. This condenses bone mineral content into an artificially reduced projected area, falsely elevating calculated BMD .

Laser Centering and Scan Field

Center the positioning laser crosshair over the femoral shaft approximately 2 inches (5 cm) distal to the greater trochanter. The scan field must include the acetabular margin superiorly, ischium medially, greater trochanter laterally, and at least 3 inches of shaft inferiorly.

Positioning Error Visual Radiographic Appearance Densitometric Impact (BMD g/cm²)

Inadequate Internal Rotation Large lesser trochanter profile; foreshortened femoral neck Artificially elevated BMD (false negative)

Excessive Internal Rotation (>30°) Trochanter rotates anteriorly over neck; obscured lesser trochanter Falsely elevated BMD or ROI error

Adduction of Femur Femoral shaft tilted inward; neck superimposes acetabulum Artificially elevated BMD from pelvic overlap

Excessive Abduction (>30°) Shaft tilted outward; lateral trochanter clipped Axis calculation failure; invalid scan

Pelvic Obliquity / Tilt Asymmetric obturator foramen; rotated pelvis Non-reproducible geometry and BMD

Loading diagram... Proximal Femur Positioning Mechanics & Geometric Hallmarks