Study guide
Safe Patient Handling, Ergonomics & Transfers
ARRT Imaging Assistant Magnetic Resonance I.A.(MR
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Patient Care — Ethics, Legal Standards & Professional Practice
ARRT Standards of Ethics & Professional Scope Legal Concepts, Patient Rights & Confidentiality Consent, Advance Directives & HIPAA Patient Communication, Education & Anxiety Management
2 Chapter 2: Patient Care — Preparation, Transfer & Vital Signs
Patient Identification, Gowning & Metal Removal Safe Patient Handling, Ergonomics & Transfers Lateral Transfers, Positioning Aids & Fall Prevention Vital Signs & Physiological Monitoring Medical Equipment, Sedation Monitoring & Physiological Gating
3 Chapter 3: Patient Care — Infection Control & Medical Emergencies
CDC Standard Precautions & Hand Hygiene PPE, Sharps & Exposure Prevention Transmission-Based Precautions & Environmental Disinfection Contrast Media Fundamentals & Patient Safety Administration Routes, Venipuncture & Injector Preparation Acute Medical Emergencies & Adverse Contrast Reactions
4 Chapter 4: MR Safety — Environment, Personnel & Access Control
The Four MR Safety Zones & Facility Architecture Shielding & Facility Engineering Controls MR Personnel Classifications & Supervisory Roles MR Safety Leadership & Assistant Responsibilities Ferromagnetic Screening Workflows & Detection Systems Ferromagnetic Detection & Its Limitations
5 Chapter 5: MR Safety — Implants, Devices & Bioeffects
ASTM F2503 Medical Device Labeling & Compatibility Interpreting MR Conditional Parameters Screening High-Risk Implants & Foreign Bodies Static Magnetic Field & Mechanical Hazards RF Fields, Gradient Fields & Patient Bioeffects Switched Gradients, Hearing Protection & Patient Symptoms
6 Chapter 6: MR Safety — Emergencies, Cryogens & Quality Culture
Cryogen Hazards & Magnet Quench Protocols Zone IV Emergency Response & Fire Safety Safety Event Reporting, Root-Cause Analysis & Quality Control Mobile, Point-of-Care & Remote MR Safety
7 Chapter 7: Positioning & Landmarking — Neurological Imaging
Brain MRI Anatomy, Landmarking & Positioning Brain Coil Setup, Landmarking & Imaging Planes Internal Auditory Canals (IAC), Pituitary & Orbit MRI Cervical Spine MRI Anatomy & Positioning Thoracic & Lumbar/Sacral Spine MRI Positioning TMJ & Soft-Tissue Neck Positioning
8 Chapter 8: Positioning & Landmarking — Body & Torso Imaging
Breast MRI Anatomy, Positioning & Coil Setup Chest, Thoracic & Brachial Plexus MRI Abdomen, Liver & Pancreas MRI Pelvis, MRCP & Specialized Enterography Studies
9 Chapter 9: Positioning & Landmarking — Upper Extremity MSK
Shoulder MRI Anatomy & Positioning Elbow & Forearm MRI Positioning Wrist & Hand MRI Positioning
10 Chapter 10: Positioning & Landmarking — Lower Extremity MSK
Hip & Pelvic Girdle MSK Positioning Hip and Pelvis: Coil Coverage & Supported Setup Knee MRI Anatomy & Positioning Knee Coil Selection, Position & Landmarking Ankle, Foot & Toe Positioning Upper & Lower Long-Bone Positioning
11 Chapter 11: Clinical Practice Integration & Exam Strategy
ARRT I.A.(MR) Exam Blueprint & Safety Passing Threshold Clinical Competency Tracking & Verification Protocols Clinical Information Systems, Handoffs & Downtime
Safe Patient Handling, Ergonomics & Transfers
Key Takeaways Explain This Topic AI
Proper body mechanics require maintaining a wide base of support with feet shoulder-width apart, keeping the center of gravity low and close to the load, and bending at the knees and hips rather than the waist.
Twisting the spine while loaded is the single greatest cause of occupational lumbar disc injury among healthcare workers; staff must pivot with their feet to change directions.
Pre-transfer screening must assess weight-bearing ability, lines/tubes, and orthostatic hypotension, dangling bedridden patients at the bedside for 1 to 2 minutes prior to standing.
Wheelchair transfers mandate engaging both wheel locks, moving footrests out of the way, positioning the chair at a 45-degree angle with the patient's stronger side adjacent to the table, and using a gait belt with an underhand grip.
Stretcher-to-scanner table lateral transfers require locked wheels, level or slightly elevated transfer surfaces, a rigid slide board, at least 2 to 4 personnel, and execution on a synchronized count called by a single leader.
Last updated: October 2026
Safe Patient Handling, Ergonomics & Transfers
Important
Healthcare workers experience musculoskeletal disorders—particularly lumbar spine sprains, strains, and herniations—at rates higher than construction workers. In the MRI suite, patient handling is further complicated by confined spaces, high scanner tables, and strict equipment restrictions. Imaging Assistants must master ergonomic transfer principles to safeguard both their own physical longevity and patient safety.
Biomechanical Foundations & Ergonomics for the Imaging Assistant
Safe patient handling depends on the fundamental laws of classical physics and biomechanics. The human musculoskeletal system acts as a system of levers, with the spine functioning as a flexible column subject to severe compressive and shear forces during manual lifting.
The Three Core Biomechanical Principles
Broad Base of Support: The stability of any object depends on the size of its base of support. An assistant must position their feet shoulder-width apart , placing one foot slightly forward in the direction of intended movement. This provides multidirectional stability across both sagittal and coronal planes, preventing loss of balance during unexpected patient weight shifts.
Center of Gravity (COG) Alignment: In an upright human, the center of gravity is situated centrally in the pelvis at approximately the level of the second sacral vertebra (S2) . To maintain balance, the body's line of gravity must fall directly within the base of support. When lifting or transferring a patient, the assistant must lower their own COG by flexing the hips and knees, bringing the patient's body as close to their own torso as possible. Holding a load away from the body dramatically lengthens the external resistance arm, multiplying the compressive force exerted on the L4–L5 and L5–S1 intervertebral discs.
Large Muscle Group Recruitment: The extensor muscles of the lower spine (erector spinae) are relatively small and designed for postural stabilization, not heavy lifting. Assistants must keep the lumbar spine in its neutral lordotic alignment, bend at the knees and hips, and engage the massive muscle groups of the lower extremities—namely the quadriceps, gluteals, and hamstrings —along with the core abdominal musculature.
Warning
Never twist the spine while supporting patient weight. Torsional forces combined with axial loading place extreme rotational shear on the annulus fibrosus of the lumbar discs, leading directly to acute disc rupture and nerve root impingement. To change direction, keep the torso aligned and pivot by moving the feet.
Pushing vs. Pulling vs. Lifting
Whenever possible, assistants should push, pull, or roll rather than lift. Pushing allows the assistant to lean their body weight into the load and recruit chest and quadriceps power. When transferring patients laterally, pulling using body weight shifting is mechanically superior to lifting vertically against gravity.
Comprehensive Pre-Transfer Assessment & Tubing Protocol
Prior to initiating any patient move, the Imaging Assistant must conduct a systematic clinical assessment of the patient's physical and cognitive status.
Assessing Mobility and Orthostatic Risk
Weight-Bearing Capacity: Determine whether the patient is full weight-bearing, partial weight-bearing, or non-weight-bearing. Inquire whether the patient has unilateral weakness (hemiparesis) resulting from a cerebrovascular accident (stroke) or orthopedic injury.
Cognitive Cooperation: Verify that the patient can understand and follow simple, sequential instructions.
Orthostatic Hypotension Prevention: Patients who have been recumbent or bedridden for extended periods suffer from blunted baroreceptor reflexes. Upon sitting or standing upright, gravitational blood pooling in the lower extremities causes a sudden drop in cerebral blood flow, manifesting as dizziness, lightheadedness, pallor, cold diaphoresis, and sudden syncope.
Clinical Prevention: When clinically permitted, transition the bedridden patient into a seated position with feet dangling over the edge of the bed or stretcher for 1 to 2 minutes . Converse with the patient and observe their facial color and alertness before assisting them to a standing position.
Managing Lines, Catheters, and Drainage Systems
Intravenous (IV) Lines: Ensure there is adequate tubing slack so lines do not pull or dislodge during transfers. Never permit tension on an IV cannulation site. Confirm that any IV infusion pole entering the suite is certified MR Conditional.
Urinary Foley Catheters: The urinary collection bag must always be maintained below the level of the patient's bladder . Elevating the bag above bladder level creates retrograde flow of stagnant urine back through the catheter, introducing pathogens into the urinary tract and causing catheter-associated urinary tract infections (CAUTIs). Never place a Foley bag on the patient's abdomen, chest, or table surface above the pelvis.
Chest Tubes and Surgical Drains: Keep drainage canisters upright and positioned below the level of the patient's chest or wound insertion site to maintain continuous gravity drainage and prevent backflow of serosanguineous fluids.
Wheelchair Transfers: Standing Pivot Technique
The standing pivot transfer is utilized for patients who can bear weight on at least one lower extremity and are cooperative.
Setup and Positioning
Wheelchair Orientation: Position the wheelchair at a 45-degree angle to the MRI table or transfer surface. Orient the chair so the patient's stronger (unaffected) side is closest to the destination table, allowing them to pivot onto their stable leg.
Wheelchair Locks: Engage the mechanical wheel locks on both sides of the wheelchair. Verify that the chair cannot roll or rotate.
Footrests: Fold up both footplates and swing the leg rests completely outward to the sides, or detach them entirely. Leaving footrests in place presents a severe tripping hazard for both patient and staff.
Gait Belt Application: Apply a sturdy fabric transfer/gait belt snugly around the patient's waist over their clothing (leaving space for two flat fingers beneath the belt). Never grasp a patient by their clothing, belt loops, or axillae. Pulling on the patient's arms or axillae can stretch the brachial plexus or dislocate the glenohumeral joint.
Execution of the Standing Pivot
Instruct the patient to slide forward toward the front edge of the wheelchair seat, placing their feet flat on the floor.
The assistant assumes a wide stance, placing their feet outside the patient's feet, and braces their outer knee and foot against the patient's weaker leg to prevent sudden knee buckling.
The assistant grasps the gait belt on both sides using an underhand (supinated) grip , keeping their back straight and elbows close to the torso.
Instruct the patient to lean forward (bringing their "nose over toes") and place their hands on the wheelchair armrests to push upward.
On a synchronized count of three ( "1, 2, 3, stand" ), the patient pushes off the armrests while the assistant shifts their body weight backward, using their legs to guide the patient into a fully upright stand.
Pause briefly to assess the patient's balance and ensure they are not experiencing orthostatic dizziness.
Instruct the patient to take small steps, pivoting on their stronger foot until their back is aligned with the scanner table.
The patient steps backward until they feel the edge of the table against the back of their calves.
The patient reaches back with both hands to grasp the table surface, and the assistant bends their knees to smoothly guide the patient down into a seated position.