Study guide

6.3 PET/CT Quality Control, Attenuation Correction & PACS

ARRT Nuclear Medicine Technology Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Patient Assessment, Care & Emergency Procedures

1.1 Patient Assessment, Medical History & Communication 1.2 Venipuncture, Vascular Access & Emergency Response

2 Chapter 2: Ethical, Legal & Professional Standards

2.1 ARRT Code of Ethics & Patient Rights 2.2 Patient Care in Special Populations & Infection Control

3 Chapter 3: Radiation Physics & Biological Effects

3.1 Atomic Structure, Nuclear Decay & Radiation Interactions 3.2 Biological Effects of Radiation & Radiobiology Principles

4 Chapter 4: Radiation Protection, ALARA & NRC Regulations

4.1 Radiation Protection Principles & ALARA Implementation 4.2 NRC Regulations, Occupational Dose Limits & Area Monitoring 4.3 Radioactive Spills, Contamination Control & Medical Events

5 Chapter 5: Gamma Camera Instrumentation & Physics

5.1 Gamma Camera Components & Signal Processing 5.2 Collimation Principles & Types 5.3 Quality Control of Gamma Cameras

6 Chapter 6: Advanced Imaging Modalities: SPECT, PET/CT & QC

6.1 SPECT Instrumentation, Reconstruction & Quality Control 6.2 PET/CT Instrumentation, Coincidence Detection & Crystals 6.3 PET/CT Quality Control, Attenuation Correction & PACS

7 Chapter 7: Radionuclide Production & Generator Systems

7.1 Radionuclide Production Methods 7.2 Mo-99/Tc-99m Generator Operations & Elution 7.3 Generator Quality Control & Breakthrough Testing

8 Chapter 8: Radiopharmaceutical Preparation, QC & Administration

8.1 Radiopharmaceutical Preparation & Chemistry 8.2 Radiochemical Purity & Dose Calibrator Quality Control 8.3 Dose Calculations, Unit Dose Dispensing & Waste Management

9 Chapter 9: Endocrine, Central Nervous System & Gastrointestinal Imaging

9.1 Thyroid & Parathyroid Imaging & Uptake 9.2 Central Nervous System Imaging 9.3 Gastrointestinal & Hepatobiliary Imaging

10 Chapter 10: Cardiovascular Imaging Procedures

10.1 Myocardial Perfusion SPECT Imaging 10.2 Cardiac Stress Protocols & Vascular Anatomy 10.3 Ventricular Function & MUGA Scans 10.4 Myocardial Viability Imaging 10.5 Cardiac Amyloid Imaging (Tc-99m PYP)

11 Chapter 11: Pulmonary, Skeletal & Renal Imaging Procedures

11.1 Pulmonary Ventilation & Perfusion (V/Q) Imaging 11.2 Skeletal System Imaging & 3-Phase Bone Scans 11.3 Renal & Genitourinary Imaging

12 Chapter 12: Tumor, Infection, Hematology & Radiopharmaceutical Therapy

12.1 Oncology PET/CT Imaging with F-18 FDG 12.2 Infection & Tumor Imaging with Special Radiopharmaceuticals 12.3 Therapeutic Radiopharmaceuticals & Radiation Safety Precautions 12.4 Lymphoscintigraphy & Sentinel Lymph Node Mapping

6.3 PET/CT Quality Control, Attenuation Correction & PACS

Key Takeaways Explain This Topic AI

A Daily PET Blank Scan (usually using a Ge-68 cylinder) is required to ensure detector functionality and update the normalization matrix.

Accurate SUV (Standardized Uptake Value) calculation requires meticulous calibration of the PET scanner with the dose calibrator and accurate patient weight/dose data.

CT Attenuation Correction (CTAC) provides a fast, low-noise density map to correct for photon attenuation, replacing older, slower Ge-68 rod source transmission scans.

Misregistration between the PET and CT scans (often due to respiratory motion) can cause severe artifacts, such as artificial cold spots or mislocalized hot spots at the lung bases.

PACS (Picture Archiving and Communication System) utilizes the DICOM standard to ensure images and metadata (like SUV factors) are accurately transmitted, archived, and displayed.

Last updated: July 2026

PET/CT Quality Control and Data Management

Operating a high-end PET/CT system requires a rigorous quality control (QC) regimen. Because PET is frequently used for quantitative analysis (measuring the exact concentration of tracer in a tumor), the scanner must be exquisitely calibrated. Furthermore, understanding how the CT scan alters the PET data, and how that data is managed post-acquisition, is vital for the technologist.

  • PET Quality Control
  • The Daily Blank Scan

Just as a gamma camera requires a daily uniformity flood, a PET scanner requires a daily Blank Scan .

Procedure: A long-lived radioactive source—typically a solid cylinder of Germanium-68 (Ge-68), which decays to the positron emitter Gallium-68—is placed in the center of the gantry. The system acquires data for a set duration.

Purpose: The Blank Scan has two primary functions:

Detector Health: It checks for malfunctioning detector blocks or entire rings. The resulting sinogram is visually inspected for "dead" or "hot" streaks, which indicate failing photomultiplier tubes or crystal modules.

Normalization Update: It serves as a daily reference to adjust the system's normalization matrix. Normalization corrects for slight variations in sensitivity between the tens of thousands of individual crystal elements in the scanner. The daily blank scan is mathematically compared against a much longer "reference" blank scan acquired during quarterly or annual calibration to calculate correction factors.

SUV Calibration (Well Counter Calibration)

The Standardized Uptake Value (SUV) is a semi-quantitative metric widely used in oncology to assess tumor metabolism and track response to therapy. It compares the concentration of radioactivity in a region of interest (e.g., a tumor) to the concentration that would be expected if the injected dose were distributed evenly throughout the patient's body.

SUV calculation depends heavily on:

Scanner Calibration: The PET scanner must accurately convert the counts it detects into absolute activity concentration (Bq/mL). This requires a periodic Cross-Calibration (or Well Counter Calibration) . A phantom is filled with a precisely measured amount of F-18 (measured in the department's dose calibrator), scanned, and the scanner software is adjusted so the measured concentration matches the known injected concentration. This explicitly ties the PET scanner to the specific dose calibrator used to assay patient doses.

Technologist Input: If the technologist enters an incorrect patient weight, incorrect assay time, incorrect administration time, or an inaccurate residual dose in the syringe, the calculated SUV will be wrong, potentially altering clinical decision-making.

Attenuation Correction: CT vs. Ge-68

In PET imaging, a 511 keV photon originating deep within the body has a high probability of being attenuated (absorbed or scattered) before reaching the detectors. Because coincidence detection requires both photons to arrive, if one photon is lost, the entire event is lost. Therefore, deep structures appear falsely "cold" without correction.

Historical: Ge-68 Rod Sources

Early stand-alone PET scanners performed a transmission scan using rotating Ge-68 rod sources to map the patient's density. While accurate, these scans were very slow (adding 15-20 minutes to the exam) and generated noisy correction maps.

Modern: CT Attenuation Correction (CTAC)

With the advent of PET/CT, the CT portion is used to generate the density map.

Mechanism: A fast, low-dose CT scan is acquired. The CT Hounsfield Units (which map tissue density based on x-ray energy, typically 120-140 kVp) are mathematically scaled up to estimate the tissue density for 511 keV gamma photons.

Advantages: CTAC is extremely fast (seconds instead of minutes), provides a virtually noiseless attenuation map, and simultaneously provides the anatomical reference image.

Artifacts in PET/CT

While CTAC is superior, combining two different imaging modalities introduces unique artifacts, primarily arising from the fact that the fast CT and the slow PET capture different physiological states.

1. Respiratory Motion Misregistration

The most significant artifact in PET/CT occurs at the lung bases and dome of the liver.

The Problem: The CT is usually acquired rapidly (seconds), often during normal shallow breathing or a breath-hold. The PET is acquired over several minutes per bed position, representing a time-averaged position of the organs.

The Artifact: If the diaphragm's position on the CT map does not match its average position during the PET scan, the attenuation correction is applied incorrectly. This can cause a high-uptake lesion in the liver dome to be projected into the lung base on the fused image, or it can create an artificial "cold" defect in the liver where the computer incorrectly assumes lung tissue exists (applying too little correction).

2. High-Density Material (Metal) Artifacts

Metallic implants (pacemakers, hip replacements, dental fillings) severely attenuate x-rays.

The Problem: On the CT scan, this creates severe streak artifacts and artificially high Hounsfield Units.

The Artifact: When the CTAC algorithm encounters these artificially high densities, it drastically overcorrects the PET data in that region. This results in an intense, false "hot spot" around the metal implant on the attenuation-corrected PET images.

Solution: Technologists must always review the non-attenuation-corrected (NAC) PET images. A true lesion will be visible on the NAC images, while a metal-induced artifact will be absent or much less prominent on the NAC images.

PACS and DICOM

Once acquired and reconstructed, the massive datasets generated by PET/CT must be stored, viewed, and shared.

PACS (Picture Archiving and Communication System): This is the hospital's central digital network for storing and retrieving medical images. A PET/CT scan may generate thousands of individual slice images, requiring robust server storage and fast network speeds.

DICOM (Digital Imaging and Communications in Medicine): This is the universal standard format for medical images. DICOM ensures that images from a GE scanner can be read on a Siemens workstation. Crucially for PET, the DICOM header contains vital metadata (patient weight, injected dose, injection time, half-life) required by the PACS workstation software to calculate and display SUVs on the fly when the radiologist draws a region of interest.

Display Matrices: While the CT may reconstruct into a high-resolution 512x512 matrix, the PET data, due to fundamental resolution limits and noise, is typically reconstructed into lower resolution matrices, such as 128x128 or 256x256, before fusion.

  • Feature CT Attenuation Correction (CTAC) Ge-68 Transmission Sources (Older PET)
  • Speed Very Fast (seconds) Slow (15-20 minutes)
  • Noise Profile Low noise High noise (requires smoothing)

Primary Issue/Artifact Susceptible to motion misregistration & metal artifacts Less affected by rapid motion, emission contamination possible

Radiation Dose Adds distinct x-ray dose to patient Very low dose from rods

Loading diagram... Impact of Metal Implant on Attenuation Correction