Study guide
15.2 Leg, Knee & Patella
ARRT Radiography Primary
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
1.1 Exam Facts, Format & Scoring 1.2 How to Study & Test-Taking Strategy
2 Ethics, Law & Professional Practice
2.1 Ethical Principles & Patient Rights 2.2 Legal Doctrines & HIPAA 2.3 ARRT Standards of Ethics & Scope of Practice
3 Communication, Assessment & Emergencies
3.1 Patient Communication & Education 3.2 Patient Assessment & Monitoring 3.3 Medical Emergencies & Support Equipment
4 Infection Control, Pharmacology & Venipuncture
4.1 Infection Control & Asepsis 4.2 Pharmacology & Contrast Media 4.3 Venipuncture & Sterile Technique
5 Radiation Physics: X-ray Production
5.1 Atomic Structure & Electromagnetic Radiation 5.2 The X-ray Tube & X-ray Production 5.3 Beam Quality/Quantity & Interactions with Matter
6 Radiobiology
6.1 Cell & Tissue Radiosensitivity 6.2 Dose-Response & Radiation Effects 6.3 Units, Measurement & Dose Quantities
7 Radiation Protection: Patient
7.1 ALARA & Minimizing Patient Dose 7.2 Exposure Factors & Dose 7.3 Shielding, Collimation & Gonadal Protection 7.4 Pediatric, Pregnant & Repeat-Exposure Considerations
8 Radiation Protection: Personnel & Regulation
8.1 Time, Distance, Shielding & Protective Apparel 8.2 Dosimetry, Dose Limits & Regulations
9 Exposure Factors & Image Formation
9.1 Prime Exposure Factors 9.2 Image Brightness, Density & Receptor Exposure 9.3 Radiographic Contrast 9.4 Spatial Resolution & Distortion
10 Digital Image Acquisition
10.1 CR vs DR Systems 10.2 Digital Image Characteristics & Exposure Index 10.3 Image Processing & Post-processing
11 Image Quality, Grids & Beam Restriction
11.1 Evaluating Image Quality 11.2 Grids 11.3 Beam Restriction & Scatter Control
12 Artifacts, QC & Image Management
12.1 Digital & Processing Artifacts 12.2 Quality Control 12.3 PACS, Display & Image Management
13 Positioning Fundamentals & Thorax
13.1 Positioning & Projection Terminology 13.2 Chest & Thorax 13.3 Ribs, Sternum & Soft-Tissue Neck/Airway
14 Abdomen & Upper Extremity
14.1 Abdomen 14.2 Hand, Wrist & Forearm 14.3 Elbow & Humerus 14.4 Shoulder Girdle
15 Lower Extremity & Pelvis
15.1 Foot, Toes & Ankle 15.2 Leg, Knee & Patella 15.3 Femur & Hip 15.4 Pelvis & SI Joints
16 Vertebral Column & Skull
16.1 Cervical Spine 16.2 Thoracic & Lumbar Spine, Sacrum & Coccyx 16.3 Skull, Facial Bones, Sinuses & Mandible
17 Contrast, Trauma, Mobile & Special
17.1 Contrast Studies 17.2 Trauma, Mobile, Surgical & Special Populations
15.2 Leg, Knee & Patella
Key Takeaways Explain This Topic AI
On an AP knee the central ray enters 0.5 inch below the patellar apex and is angled by the ASIS-to-tabletop measurement: under 19 cm angles 3-5 degrees caudad, 19-24 cm is perpendicular, over 24 cm angles 3-5 degrees cephalad.
The lateral knee is flexed 20-30 degrees with the central ray angled 5-7 degrees cephalad to open the joint and prevent the medial condyle obscuring it.
The Camp Coventry and Holmblad tunnel methods demonstrate the intercondylar fossa and detect loose bodies.
The tangential (Settegast/sunrise, or Merchant) projection demonstrates the patellofemoral joint and patella in profile.
Long-bone leg (tibia-fibula) projections must include both the knee and ankle joints on the image.
Last updated: October 2026
Anatomy of the Knee Region
The knee is formed by the distal femur , the proximal tibia , the proximal fibula , and the patella . On the distal femur, identify the medial and lateral condyles , the medial and lateral epicondyles , and the intercondylar fossa (notch) posteriorly between the condyles. The proximal tibia carries the medial and lateral condyles , the tibial plateau , the intercondylar eminence (tibial spines) , and the anterior tibial tuberosity . The fibular head, neck, and apex (styloid) sit laterally and slightly posterior. The patella is the body's largest sesamoid bone ; its base is superior and its apex is inferior. Understanding that the medial femoral condyle projects lower and larger than the lateral condyle explains why the lateral knee requires a cephalic angle.
Leg (Tibia and Fibula)
The AP and lateral leg follow the long-bone rule : both the knee and the ankle joints must be included on the image. The AP places the leg with the foot dorsiflexed and no rotation, CR perpendicular to the midpoint; the lateral is a mediolateral projection with both joints demonstrated. If the leg is too long for a single field, angle the tube slightly or use two exposures, but each joint must appear on the film for the exam to accept the image.
Knee
The AP knee is the exam's most detailed central-ray question. The CR enters 0.5 inch (about 1.25 cm) below the patellar apex , and the angle is set by the ASIS-to-tabletop distance , which reflects patient thickness:
- ASIS-to-tabletop distance Central-ray angle
- Less than 19 cm (thin/asthenic) 3-5 degrees caudad
- 19 to 24 cm (average) Perpendicular (0 degrees)
- More than 24 cm (large/hypersthenic) 3-5 degrees cephalad
This rule keeps the joint space open regardless of body build. The AP oblique with 45 degrees medial (internal) rotation demonstrates the proximal tibiofibular articulation and the lateral condyle in profile; the 45 degrees lateral (external) rotation oblique shows the medial condyle. The lateral knee flexes the joint 20 to 30 degrees and angles the CR 5 to 7 degrees cephalad ; this prevents the larger, lower medial condyle from obscuring the joint and superimposes the femoral condyles.
Intercondylar Fossa (Tunnel)
The intercondylar fossa is imaged with PA axial tunnel methods that detect loose bodies, subchondral defects, and narrowing. The Camp Coventry method is prone with the knee flexed 40 to 50 degrees and the CR angled perpendicular to the lower leg. The Holmblad method has the patient kneeling (or leaning) with the knee flexed about 70 degrees and the CR perpendicular. Both open the intercondylar fossa (tunnel) . The Beclere method is the AP-axial alternative when the patient cannot assume the prone/kneeling position.
Patella
Routine patella imaging includes a PA and a lateral . The PA patella is prone with the patella parallel to the receptor and the CR perpendicular; the PA gives better recorded detail than the AP because the patella lies closer to the image receptor (less object-to-image distance, or OID ). The lateral patella flexes the knee only 5 to 10 degrees , because excessive flexion draws the patella tightly into the intercondylar groove and can separate a transverse fracture. The tangential (axial) patella demonstrates the patellofemoral joint and the patella in profile . The Settegast (sunrise/skyline) method requires acute knee flexion and is contraindicated when a transverse patellar fracture is suspected ; the Merchant method uses a supported axial device with about 45 degrees of flexion and is safer, while the Hughston is a prone tangential variant.
Technical Factors and Evaluation Criteria
Knee and leg work uses a grid on larger patients (above roughly 10 cm of tissue) with kVp around 70 to 80 ; the thin distal leg may be done tabletop. A properly positioned lateral knee superimposes the medial and lateral femoral condyles , opens the femoropatellar joint space, and shows the patella in profile; if the condyles are not superimposed, adjust rotation, and if the joint is closed, verify the 5 to 7 degree cephalad angle and 20 to 30 degrees of flexion. A well-positioned AP knee shows the femorotibial joint space open and symmetric with the fibular head slightly overlapped by the tibia. The two AP obliques are easy to reverse: 45 degrees medial (internal) rotation best demonstrates the proximal tibiofibular articulation and clears the fibular head, whereas 45 degrees lateral (external) rotation superimposes the tibia and fibula and profiles the medial condyle.
Worked Scenario
Consider a hypersthenic patient who measures 26 cm from ASIS to tabletop: the technologist angles the CR 3 to 5 degrees cephalad and centers 0.5 inch below the patellar apex. An asthenic patient at 17 cm instead receives 3 to 5 degrees caudad , and an average patient at 21 cm gets a perpendicular beam. For the PA patella , expect superior recorded detail versus the AP because the patella lies against the receptor, reducing magnification. When a transverse patellar fracture is suspected, choose the supported Merchant tangential over the acutely flexed Settegast to avoid separating fragments.
Common Traps
The classic error is mixing up the tunnel and tangential projections: Camp Coventry and Holmblad show the intercondylar fossa , while Settegast and Merchant show the patellofemoral joint . Another is reversing the AP-knee angle logic; remember that a thin patient (small ASIS-to-tabletop distance) needs caudad angulation, while a large patient needs cephalad . Finally, do not over-flex the knee for a lateral patella when a fracture is suspected, and always include both joints on a leg study.