Study guide

13.1 Positioning & Projection Terminology

ARRT Radiography Primary

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

1.1 Exam Facts, Format & Scoring 1.2 How to Study & Test-Taking Strategy

2 Ethics, Law & Professional Practice

2.1 Ethical Principles & Patient Rights 2.2 Legal Doctrines & HIPAA 2.3 ARRT Standards of Ethics & Scope of Practice

3 Communication, Assessment & Emergencies

3.1 Patient Communication & Education 3.2 Patient Assessment & Monitoring 3.3 Medical Emergencies & Support Equipment

4 Infection Control, Pharmacology & Venipuncture

4.1 Infection Control & Asepsis 4.2 Pharmacology & Contrast Media 4.3 Venipuncture & Sterile Technique

5 Radiation Physics: X-ray Production

5.1 Atomic Structure & Electromagnetic Radiation 5.2 The X-ray Tube & X-ray Production 5.3 Beam Quality/Quantity & Interactions with Matter

6 Radiobiology

6.1 Cell & Tissue Radiosensitivity 6.2 Dose-Response & Radiation Effects 6.3 Units, Measurement & Dose Quantities

7 Radiation Protection: Patient

7.1 ALARA & Minimizing Patient Dose 7.2 Exposure Factors & Dose 7.3 Shielding, Collimation & Gonadal Protection 7.4 Pediatric, Pregnant & Repeat-Exposure Considerations

8 Radiation Protection: Personnel & Regulation

8.1 Time, Distance, Shielding & Protective Apparel 8.2 Dosimetry, Dose Limits & Regulations

9 Exposure Factors & Image Formation

9.1 Prime Exposure Factors 9.2 Image Brightness, Density & Receptor Exposure 9.3 Radiographic Contrast 9.4 Spatial Resolution & Distortion

10 Digital Image Acquisition

10.1 CR vs DR Systems 10.2 Digital Image Characteristics & Exposure Index 10.3 Image Processing & Post-processing

11 Image Quality, Grids & Beam Restriction

11.1 Evaluating Image Quality 11.2 Grids 11.3 Beam Restriction & Scatter Control

12 Artifacts, QC & Image Management

12.1 Digital & Processing Artifacts 12.2 Quality Control 12.3 PACS, Display & Image Management

13 Positioning Fundamentals & Thorax

13.1 Positioning & Projection Terminology 13.2 Chest & Thorax 13.3 Ribs, Sternum & Soft-Tissue Neck/Airway

14 Abdomen & Upper Extremity

14.1 Abdomen 14.2 Hand, Wrist & Forearm 14.3 Elbow & Humerus 14.4 Shoulder Girdle

15 Lower Extremity & Pelvis

15.1 Foot, Toes & Ankle 15.2 Leg, Knee & Patella 15.3 Femur & Hip 15.4 Pelvis & SI Joints

16 Vertebral Column & Skull

16.1 Cervical Spine 16.2 Thoracic & Lumbar Spine, Sacrum & Coccyx 16.3 Skull, Facial Bones, Sinuses & Mandible

17 Contrast, Trauma, Mobile & Special

17.1 Contrast Studies 17.2 Trauma, Mobile, Surgical & Special Populations

13.1 Positioning & Projection Terminology

Key Takeaways Explain This Topic AI

The midsagittal plane (MSP) divides the body into equal right and left halves and is the anti-rotation reference for AP/PA projections; the midcoronal plane (MCP) references a true lateral.

A projection names the path of the central ray through the body (AP enters anterior/exits posterior; PA is the reverse); a position names the patient's overall body attitude (supine, prone, erect, oblique, decubitus).

Oblique positions are named for the body part closest to the image receptor: PA obliques are RAO/LAO; AP obliques are RPO/LPO.

A decubitus position always uses a HORIZONTAL central ray with the patient recumbent, which is what makes air-fluid levels visible.

Key surface landmarks: vertebra prominens = C7, jugular notch = T2-3, sternal angle = T4-5, inferior scapular angle = T7, iliac crest = L4-5, ASIS = S1-2.

Last updated: October 2026

Speaking the Language of Positioning

Radiographic positioning is a precise technical language. Before you can produce a diagnostic image, you must translate a physician's order into a body plane , a body position , a projection , and a central-ray (CR) path . ARRT's Procedures category is the largest on the exam (66 scored items, 33%), and it assumes you have already mastered this vocabulary, because a single misused term changes the image entirely. Confusing a projection with a position , or an RAO with an RPO, will cost you points and, in the clinic, an unnecessary repeat exposure.

Body Planes and Reference Lines

Imaginary flat surfaces called planes slice the body for description. Four appear repeatedly on the exam.

Plane Divides body into Radiographic use

Sagittal Right and left parts Midsagittal plane (MSP) = equal halves; centering reference to prevent rotation on AP/PA

  • Coronal (frontal) Anterior and posterior Midcoronal plane (MCP), or midaxillary; reference for a true lateral
  • Transverse (horizontal/axial) Superior and inferior Plane of cross-sectional CT/MRI slices
  • Oblique Angled sections Any plane not parallel to the three above

The midsagittal plane (MSP) divides the body into equal right and left halves; keeping the MSP perpendicular or parallel to the image receptor (IR) is how you eliminate rotation. The midcoronal plane (MCP) divides the body into equal anterior and posterior halves and defines a true lateral.

Body Positions (General Body Attitude)

A position describes the patient's overall physical attitude. Do not confuse it with a projection.

Supine (dorsal recumbent): lying on the back, face up.

Prone (ventral recumbent): lying on the abdomen, face down.

Erect (upright): standing or seated vertical.

Recumbent: any lying-down position (supine, prone, or lateral).

Lateral recumbent: lying on the right or left side.

Decubitus: patient is recumbent AND the central ray is horizontal (parallel to the floor). Named for the dependent surface plus CR direction: dorsal decubitus (supine, horizontal beam), ventral decubitus (prone), and lateral decubitus (on the side). Decubitus positions are what reveal air-fluid levels .

Trendelenburg: head lower than the feet (used for contrast studies and shock).

Fowler: head higher than the feet (semi-erect).

Sims: recumbent, semi-prone on the left anterior side with the right knee flexed; the classic position for inserting a barium-enema tip.

Lithotomy: supine with knees flexed and thighs abducted.

Projections: The Path of the Central Ray

A projection is defined strictly by the path the CR travels through the body from entrance to exit.

Anteroposterior (AP): CR enters the anterior surface and exits posterior.

Posteroanterior (PA): CR enters posterior and exits anterior (the reverse of AP).

Lateral: CR passes through the coronal plane; the projection is named for the side of the patient closest to the IR (a left lateral has the left side against the IR).

Oblique: the body is rotated so the CR passes through it diagonally. Obliques are named for the body part closest to the IR: the PA obliques are the RAO (right anterior oblique) and LAO (left anterior oblique); the AP obliques are the RPO (right posterior oblique) and LPO (left posterior oblique).

Axial: any projection with a longitudinal CR angulation of 10 degrees or more along the long axis of the body.

Tangential: the CR skims (is directed tangent to) a body part to throw it into profile and free it of superimposition (for example, the sunrise patella or the zygomatic arch).

Oblique Naming Trap

Students lose points by mixing anterior and posterior obliques. Memorize: A = Anterior = part against IR is anterior , which requires the patient to face the IR (as in a PA-type setup). P = Posterior = part against IR is posterior , so the patient's back is toward the IR (an AP-type setup). An RAO (right anterior oblique) and an LPO (left posterior oblique) show similar anatomy, but not because the same part is nearest the IR: the RAO places the right anterior surface against the IR and the LPO the left posterior surface. They are mirror-image setups at the same angle, one facing the receptor and one facing the tube.

Central-Ray Direction and Angulation

After you set the position, you aim the CR. Perpendicular means the beam strikes the IR at 90 degrees. Angling the tube toward the patient's head is cephalad (or cephalic); angling toward the feet is caudad (or caudal). Angulation is used to open joint spaces and to project overlapping structures apart — for example, an AP axial clavicle angles 15-30 degrees cephalad to throw the clavicle above the ribs, and an AP axial (Towne) skull angles caudad. Whenever you read "axial" in an ARRT item, expect a CR angle of 10 degrees or more along the long axis of the body.

Position vs. Projection vs. View — the Classic Trap

Exam writers deliberately blur these three terms. A projection is the CR path (AP, PA, lateral, oblique, axial, tangential). A position is the patient's body attitude (supine, prone, erect, RAO, left lateral, decubitus). A view , in the strict Merrill's convention, describes the image as the IR "sees" it and is the exact opposite of the projection — a term ARRT discourages for describing patient setup. So an order for a "PA chest, erect" combines a projection (PA) with a position (erect). If a question asks for the projection but you answer with a position name like "RAO," you have answered a different question. Read carefully: the word projection points to the CR path; the word position points to how the body is turned.

Surface Landmarks to Internal Anatomy

Because you cannot see internal structures, you center to palpable surface landmarks . High-yield correlations:

  • Surface landmark Vertebral/skeletal level
  • Vertebra prominens (C7 spinous process) C7-T1
  • Jugular (suprasternal) notch T2-T3
  • Sternal angle (angle of Louis) T4-T5 (tracheal bifurcation)
  • Inferior angle of scapula T7
  • Xiphoid process tip T9-T10
  • Lower costal (rib) margin L2-L3
  • Iliac crest L4-L5 interspace
  • Anterior superior iliac spine (ASIS) S1-S2
  • Greater trochanter Level of the pubic symphysis
  • Pubic symphysis / ischial tuberosity Inferior pelvis

These landmarks reappear in every chapter of the Procedures domain. When an item asks where to center a chest, an abdomen, or a spine, you are being tested on this table.