Study guide

11.2 Color & Spectral Analysis: Measurements and Waveforms

ARRT Sonography Primary

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts & Logistics 1.2 Scoring, Section Minimums & the August 2026 Cut-Score Change 1.3 Official Blueprint & Study Strategy

2 Patient Care: Ethics, Legal Practice & Communication

2.1 Ethical & Legal Aspects of Patient Care 2.2 Interpersonal Communication & Patient Education 2.3 Physical Assistance, Monitoring & Sonographer Ergonomics

3 Patient Care: Safety, Emergencies & Infection Control

3.1 Medical Emergencies & Critical Findings 3.2 Infection Control & Hazardous Materials 3.3 Ultrasound Safety & Interventional Procedure Care

4 Image Production: Transducers & the Ultrasound Beam

4.1 Piezoelectric Effect & Transducer Construction 4.2 Beam Configuration: Near Field, Far Field & Focus 4.3 Transducer Types, Selection, Care & Malfunctions

5 Image Production: Pulse Characteristics & Resolution

5.1 Pulse Characteristics: PRF, PRP, SPL & Duty Factor 5.2 Resolution: Axial, Lateral, Temporal, Elevational & Contrast 5.3 Frequency, Bandwidth, Q Factor, Power, Pressure, Intensity & Amplitude

6 Image Production: Imaging Modes & Doppler Principles

6.1 B-Mode & M-Mode Imaging 6.2 Spectral Doppler: Pulsed Wave vs Continuous Wave 6.3 Color Doppler & Power Doppler

7 Image Production: Optimization Controls

7.1 Power, Gain, TGC, Depth & Focal Zone 7.2 Frame Rate, Line Density, Dynamic Range, Harmonics & Compounding 7.3 Doppler Optimization Controls

8 Image Production: Sound–Tissue Interactions

8.1 Speed of Sound & the Range Equation 8.2 Acoustic Impedance, Reflection, Refraction & Scattering 8.3 Attenuation, Absorption & Intensity

9 Image Production: Signal Processing, Display & Bioeffects

9.1 Receiver, Signal Processing & Analog-Digital Conversion 9.2 Postprocessing, Magnification, Panoramic & 3D/4D Imaging 9.3 Bioeffects & Output Display Measures

10 Image Production: Image Evaluation & Artifacts

10.1 Criteria for Diagnostic Quality & Annotation 10.2 Grayscale Artifacts 10.3 Doppler Artifacts

11 Image Production: Real-Time Interpretation & Informatics

11.1 Real-Time Imaging, Echogenicity & Echotexture 11.2 Color & Spectral Analysis: Measurements and Waveforms 11.3 Imaging Informatics: HIS, RIS, EMR, PACS & DICOM

12 Procedures: Abdominal & Transplant Vasculature

12.1 Aorta, Its Branches & the IVC 12.2 Portal Venous System & Hepatic Vasculature 12.3 Liver & Renal Transplant Sonography

13 Procedures: Liver

13.1 Liver Anatomy, Variants & Examination Technique 13.2 Diffuse Liver Disease 13.3 Focal Liver Lesions

14 Procedures: Biliary System, Pancreas & Spleen

14.1 Gallbladder & Bile Ducts 14.2 Pancreas 14.3 Spleen

15 Procedures: Urinary Tract, GI Tract & Other Abdominal Structures

15.1 Kidneys & Ureters 15.2 Bladder & Prostate 15.3 GI Tract, Adrenals, Lymph Nodes, Hernias & Peritoneal Cavity

16 Procedures: First-Trimester Obstetrics

16.1 Early Gestation: Normal Development & Structures 16.2 First-Trimester Measurements, Dating & Maternal Anatomy 16.3 First-Trimester Abnormalities

17 Procedures: Second/Third-Trimester Biometry & Fetal Survey

17.1 Standard Biometry: BPD, HC, AC, FL & Growth Assessment 17.2 Fetal Anatomic Survey: Head, CNS, Face & Spine 17.3 Fetal Anatomic Survey: Heart, Chest, GI, GU, Skeleton & Fetal Position

18 Procedures: Chromosomal, Genetic & Structural Abnormalities

18.1 Chromosomal & Genetic Abnormalities 18.2 Major Structural Anomalies by System 18.3 Fetal Infection, Neoplasms & Hydrops

19 Procedures: Placenta, Amniotic Fluid, Cord & Cervix

19.1 Placenta: Normal, Previa, Abruption & Accreta 19.2 Amniotic Fluid Assessment & Growth Disorders 19.3 Umbilical Cord & Cervical Assessment

20 Procedures: Fetal Assessment, Doppler & Multiple Gestation

20.1 Biophysical Profile & Fetal Surveillance 20.2 Fetal & Uteroplacental Doppler 20.3 Multiple Gestations, Assisted Reproduction & Maternal Disease

21 Procedures: Gynecology — Uterus

21.1 Uterine Anatomy, Myometrium & Fibroids 21.2 Endometrium: Cyclic Changes, Hyperplasia & Cancer 21.3 Cervix & Congenital Uterine Anomalies

22 Procedures: Gynecology — Adnexa & Pelvis

22.1 Ovaries: Normal, Functional Cysts & Benign Masses 22.2 Ovarian Malignancy, Torsion & Fallopian Tubes 22.3 Cul-de-Sac, Vagina & Pelvic Floor

23 Procedures: Neck & Scrotum

23.1 Thyroid & Parathyroid 23.2 Salivary Glands & Neck Lymph Nodes 23.3 Scrotum & Testes

24 Procedures: Breast & Peripheral Vascular

24.1 Breast & Axilla 24.2 Venous Extremity Doppler 24.3 Carotid Doppler & Post-Catheterization Complications

25 Procedures: Pediatric, Interventional & Miscellaneous

25.1 Neonatal Head, Spine & Hip Sonography 25.2 Pediatric GI & Noncardiac Chest 25.3 Ultrasound-Guided Interventions, MSK & Superficial Masses

11.2 Color & Spectral Analysis: Measurements and Waveforms

Key Takeaways Explain This Topic AI

Color Doppler encodes flow direction relative to the transducer — red typically means toward, blue away (BART) — never artery versus vein; the map can be inverted, so always read the color bar

Demonstrating absence of flow is as diagnostic as presence: no flow in a testis suggests torsion, and no flow in a structure confirms it is cystic rather than vascular

Resistive index RI = (PSV − EDV) ÷ PSV and pulsatility index PI = (PSV − EDV) ÷ mean velocity; a renal RI above about 0.7 is considered abnormal

Low-resistance waveforms (internal carotid, renal, hepatic arteries) show continuous forward diastolic flow; high-resistance waveforms (resting limb arteries, external carotid, the fasting SMA) show little, reversed, or triphasic diastolic flow

A tardus parvus waveform — delayed systolic upstroke (tardus) with low, rounded amplitude (parvus) — indicates significant stenosis proximal to the sampling site

Last updated: July 2026

Color Doppler: Direction and Presence of Flow

Color Doppler overlays a color map on the grayscale image, assigning a hue to each pixel based on the mean Doppler shift — and therefore on the direction of flow relative to the transducer . The default convention is summarized by the mnemonic BART: Blue Away, Red Toward . Red means flow moving toward the transducer; blue means flow moving away . The single most-tested point is what color does not mean: red does not mean artery and blue does not mean vein. One artery curving through the field can appear red, then blue, then red again as its direction relative to the probe changes. The color map is also operator-invertible, so the only safe habit is to read the color bar at the edge of the image, which shows which hue is assigned toward and which away.

Aliasing in color Doppler — apparent color reversal from red to blue within a vessel at high velocity — is a sampling (Nyquist) phenomenon, not a change in true flow direction, and is managed by increasing the pulse repetition frequency (scale) or lowering the baseline.

Presence Versus Absence of Flow

Just as important as direction is simply documenting whether flow exists. High-yield applications:

Cystic versus vascular — an anechoic tubular structure with no color flow is a fluid structure (cyst, dilated duct); flow confirms a vessel. This is how the common bile duct is distinguished from the hepatic artery and portal vein in the porta hepatis.

Testicular torsion — absent or markedly decreased flow in the symptomatic testis compared with the normal side supports torsion.

Ovarian torsion — diminished or absent flow raises suspicion, though preserved flow does not exclude it.

Thrombus — no flow within a vein (for example, a non-compressible femoral vein or the portal vein lumen) indicates thrombosis.

Tissue viability — absent flow supports infarction or avascular necrosis in the appropriate setting.

Spectral Doppler: Quantifying the Waveform

Spectral (pulsed-wave) Doppler displays the full range of velocities in the sample volume over time. From the traced waveform, the system measures:

  • Measurement Definition
  • PSV Peak systolic velocity — the highest velocity reached in systole (cm/s)
  • EDV End-diastolic velocity — the velocity at the end of diastole (cm/s)
  • RI Resistive index = (PSV − EDV) ÷ PSV
  • PI Pulsatility index = (PSV − EDV) ÷ mean velocity

The resistive index (RI) , also called the Pourcelot index, reflects downstream vascular resistance: the more diastolic flow is preserved, the lower the RI. Because the ratio divides by PSV, it is independent of the Doppler angle — a major practical advantage when vessels cannot be insonated at a proper angle.

Worked example: A renal interlobar artery shows PSV = 100 cm/s and EDV = 25 cm/s. RI = (100 − 25) ÷ 100 = 0.75 . A native renal RI above approximately 0.7 is generally considered abnormal, seen with medical renal disease, obstruction, or transplant dysfunction, so 0.75 would be reported as elevated. For PI, if the same vessel had a mean velocity of 45 cm/s, PI = (100 − 25) ÷ 45 ≈ 1.67 .

High-Resistance Versus Low-Resistance Waveforms

Waveform shape reflects the vascular bed being supplied:

Low-resistance (continuous forward flow) — organs that need constant perfusion show systolic peaks with continuous forward diastolic flow . Examples: internal carotid artery , renal artery , hepatic artery , the celiac artery in any state (it feeds the liver and spleen), the superior mesenteric artery after a meal , and the uterine arteries in pregnancy. A normal internal carotid RI is roughly 0.5–0.7.

High-resistance (pulsatile, little or reversed diastolic flow) — beds at rest that do not need continuous perfusion. These beds become low-resistance on demand — a limb artery after exercise, the SMA 30 to 60 minutes after eating. The classic example is the triphasic waveform of a fasting peripheral artery (for example, the common femoral artery): sharp systolic upstroke, brief flow reversal in early diastole, then a small forward component. The external carotid artery is also high-resistance, which helps distinguish it from the internal carotid (along with the temporal artery tap causing visible oscillations in the external carotid tracing). The superior mesenteric artery converts from high-resistance (fasting) to low-resistance after a meal.

Changing an expected pattern is the abnormality: a peripheral artery that loses its reversal component and shows continuous forward flow suggests proximal disease or vasodilation; a renal or hepatic artery that becomes high-resistance suggests downstream parenchymal or venous problems.

Tardus Parvus: The Signature of Proximal Stenosis

When a significant stenosis lies proximal (upstream) to the sample site, the distal waveform loses its brisk character and becomes tardus parvus — from Latin, tardus = slow/late, parvus = small. Its two features:

Tardus — a delayed systolic upstroke (prolonged acceleration time, typically > 70 ms in the renal literature), reflecting the slow pressure rise beyond the obstruction

Parvus — low amplitude with a rounded, blunted peak, reflecting reduced velocity distal to the lesion

Clinically, finding tardus parvus waveforms in the renal parenchymal arteries prompts a search for renal artery stenosis proximally; the same pattern in hepatic arteries after liver transplant raises concern for hepatic artery stenosis. The companion direct criterion at the stenosis itself is focal velocity elevation — in renal artery stenosis, a renal-aortic ratio (RAR) of PSV above about 3.5 with renal PSV above roughly 180–200 cm/s. Recognize the logic for the exam: at the stenosis, velocities are high; downstream, the waveform is small and slow.