Study guide

13.3 Small Grains Feekes/Zadoks Scales & Cotton Development

Certified Crop Adviser International

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview & Certified Crop Adviser Certification

1.1 International CCA Exam Structure & Testing Format 1.2 CCA Certification Requirements, Ethics & CEUs

2 Chapter 2: Essential Soil Fertility & Plant Nutrition

2.1 Macro, Secondary, and Micronutrients in Agronomy 2.2 Soil Chemical Properties, CEC, and Nutrient Availability 2.3 Nutrient Mobility in Soil and Plant Deficiency Symptoms

3 Chapter 3: Nitrogen Dynamics & Fertilizer Management

3.1 The Nitrogen Cycle: Mineralization, Immobilization & Transformations 3.2 Nitrogen Loss Pathways: Volatilization, Nitrification & Leaching 3.3 Nitrogen Fertilizer Sources, Inhibitors & Application Strategies

4 Chapter 4: Phosphorus, Potassium & Secondary Nutrients

4.1 Soil Phosphorus Chemistry, Fixation & Availability 4.2 Soil Potassium Forms, Release Mechanisms & Crop Requirements 4.3 Secondary Nutrients (Ca, Mg, S) and Micronutrient Management

5 Chapter 5: Soil Testing, Liming & 4R Stewardship

5.1 Soil Sampling Protocols & Laboratory Analysis Interpretation 5.2 Soil Acidification, Liming Chemistry, CCE & Application Rates 5.3 4R Nutrient Stewardship & Manure Nutrient Management

6 Chapter 6: Soil Physical Properties & Organic Matter

6.1 Soil Textural Triangle, Pore Space & Bulk Density 6.2 Soil Organic Matter Dynamics, Carbon Cycling & Soil Health 6.3 Soil Compaction Causes, Measurement & Remediation 6.4 Site Characterization: Soil Horizons, Surveys & Landscape Analysis

7 Chapter 7: Soil Hydrology, Drainage & Erosion Control

7.1 Soil Water Availability, Infiltration & Matric Potential 7.2 Water & Wind Erosion Mechanics, RUSLE & Conservation Practices 7.3 Subsurface Tile & Surface Drainage System Design

8 Chapter 8: Irrigation Management & Soil Salinity

8.1 Irrigation System Types, Evapotranspiration & Scheduling 8.2 Irrigation Water Quality, SAR & Boron Toxicity 8.3 Saline & Sodic Soil Diagnosis, Reclamation & Management 8.4 Water Quality Protection: Eutrophication, Nitrate & Wellhead Safety

9 Chapter 9: Integrated Pest Management Principles & Scouting

9.1 IPM Principles, Economic Injury Levels & Action Thresholds 9.2 Field Scouting Protocols, Sampling Patterns & Diagnostic Tools 9.3 Pest Resistance Mechanisms & Resistance Management Strategies 9.4 Pesticide Stewardship: Spray Drift, Handler Safety & Worker Protection

10 Chapter 10: Weed Science & Herbicide Management

10.1 Weed Life Cycles, Seed Bank Dynamics & Competition 10.2 Herbicide Classification, HRAC Groups & Sites of Action 10.3 Herbicide Carryover, Environmental Fate & Selectivity

11 Chapter 11: Agricultural Entomology & Insect Control

11.1 Insect Orders, Metamorphosis & Feeding Mechanisms 11.2 Economic Crop Pests Identification & Threshold-Based Control 11.3 Insecticide IRAC Groups, Biological Control & Insect Resistance Management

12 Chapter 12: Plant Pathology & Crop Disease Management

12.1 The Disease Triangle, Pathogen Types & Diagnosis 12.2 Major Field Crop Diseases & Infection Cycles 12.3 Fungicide FRAC Groups, Cultural Controls & Integrated Disease Management

13 Chapter 13: Crop Physiology, Staging & Growth

13.1 Corn Growth Staging (V1-Vn, R1-R6) & Yield Components 13.2 Soybean Growth Staging (V1-Vn, R1-R8) & Physiology 13.3 Small Grains Feekes/Zadoks Scales & Cotton Development 13.4 Growing Degree Days (GDD) & Thermal Unit Calculations

14 Chapter 14: Tillage, Cropping Systems & Cover Crops

14.1 Conventional, Reduced, Strip-Till & No-Till System Comparison 14.2 Crop Rotation Agronomics, Pest Break & Yield Penalty Avoidance 14.3 Cover Crop Species Selection, Establishment & Termination Methods 14.4 Soil Management Effects on Air Quality & Greenhouse Gas Emissions

15 Chapter 15: Hybrid Selection, Planting & Seeding

15.1 Seed Genetics, Hybrid/Variety Selection & Disease Traits 15.2 Seeding Rate Calculations, Planting Depth & Row Spacing 15.3 Seed Quality, Germination Testing & Seed Treatment Chemistry

16 Chapter 16: Precision Agriculture & Smart Farming

16.1 GNSS Positioning, GIS Spatial Mapping & Remote Sensing (NDVI) 16.2 Variable Rate Technology (VRT) for Lime, Fertilizer & Seed 16.3 Yield Monitor Calibration, Spatial Data Analysis & Prescription Maps

17 Chapter 17: Harvest, Storage & Post-Harvest Quality

17.1 Harvest Timing Determination & Field Grain Loss Assessment 17.2 Grain Drying Dynamics, Moisture Management & Aeration 17.3 Stored Grain Pest Management, Aeration & Sanitation 17.4 Crop Production Economics: ROI, Commodity Pricing & Risk Management

13.3 Small Grains Feekes/Zadoks Scales & Cotton Development

Key Takeaways Explain This Topic AI

The Feekes and Zadoks scales are essential for precise agronomic management of small grains like wheat.

Cotton has an indeterminate fruiting habit, simultaneously producing vegetative and reproductive growth.

Cutout in cotton occurs when carbohydrate demand for boll filling exceeds photosynthetic capacity for new growth.

Last updated: July 2026

13.3 Small Grains Feekes/Zadoks Scales & Cotton Development

Understanding the growth stages of both small grains (like wheat, barley, and oats) and cotton is vital for effective agronomic management. While small grains follow precise numerical scales focusing on tillering, stem elongation, and heading, cotton development is characterized by its complex, indeterminate fruiting habit. This section covers the Feekes and Zadoks scales for small grains, followed by the developmental milestones of cotton.

Small Grains Staging: Feekes and Zadoks Scales

Accurate staging of small grains is essential for the precise application of fertilizers (especially top-dressed nitrogen), herbicides, and fungicides. Applying chemicals at the wrong stage can lead to crop injury or reduced efficacy. Two primary scales are used globally: the Feekes scale and the Zadoks scale.

The Feekes Scale (1-11)

The Feekes scale is a 1-to-11 numerical system that is widely used in the United States, particularly by agronomists and farmers. It is relatively simple and focuses on the visual milestones of the crop.

Feekes 1-3 (Tillering):

Feekes 1: Emergence. The single shoot emerges from the soil.

Feekes 2: Beginning of tillering. Secondary shoots (tillers) begin to emerge from the crown.

Feekes 3: Tillers are formed. The plant has a prostrate growth habit (in winter wheat) and is building carbohydrate reserves. This is a common time for early nitrogen applications and weed control.

Feekes 4-5 (Jointing and Sheath Elongation):

Feekes 4: Beginning of erect growth. The leaf sheaths begin to lengthen.

Feekes 5: Leaf sheaths are strongly erect. The growing point is still below ground, but the plant is preparing for rapid stem elongation.

Feekes 6-7 (Stem Elongation):

Feekes 6 (Jointing): The first node is visible and can be felt above the soil surface. The growing point is now above ground and vulnerable to freeze damage. Herbicides must typically be applied before or at this stage to avoid crop injury.

Feekes 7: The second node is visible.

Feekes 8 (Flag Leaf Emergence): The flag leaf, which is the final leaf to emerge, begins to unroll. The flag leaf is responsible for upwards of 75% of the carbohydrates that fill the grain, making its protection from disease critical.

Feekes 9 (Ligule of Flag Leaf Visible): The flag leaf is fully expanded. This is the prime time for applying protective fungicides.

Feekes 10 (Boot Stage): The head (spike) is swelling within the sheath of the flag leaf, creating a visible "boot."

Feekes 10.1-10.5: Heading. The head emerges from the boot.

Feekes 10.51: Beginning of flowering (anthesis). This is a highly critical stage for infection by Fusarium Head Blight (scab). Fungicides targeting scab must be applied during this brief window.

Feekes 11 (Ripening):

Feekes 11.1: Milky ripe.

Feekes 11.2: Mealy ripe (dough stage).

Feekes 11.3: Kernel hard (physiological maturity).

Feekes 11.4: Harvest ready.

The Zadoks Scale (0-99)

The Zadoks scale is a more detailed, two-digit decimal code system preferred by researchers and used extensively in Europe. It provides a more granular description of the plant's architecture.

  • 00-09: Germination
  • 10-19: Seedling growth (number indicates the number of unfolded leaves, e.g., 13 = three leaves unfolded)
  • 20-29: Tillering (number indicates the number of tillers, e.g., 22 = main shoot and two tillers)

30-39: Stem elongation (e.g., 31 = first node detectable, equivalent to Feekes 6; 39 = flag leaf ligule just visible, equivalent to Feekes 9)

  • 40-49: Booting (e.g., 45 = late boot)
  • 50-59: Inflorescence (head) emergence (e.g., 55 = half of head emerged)
  • 60-69: Anthesis (flowering) (e.g., 65 = flowering half-way completed)
  • 70-79: Milk development
  • 80-89: Dough development
  • 90-99: Ripening

Understanding the cross-reference between Feekes and Zadoks is essential. For example, Feekes 6 (Jointing) corresponds to Zadoks 31. Feekes 9 (Flag Leaf) corresponds to Zadoks 39. Feekes 10.51 (Flowering) corresponds to Zadoks 60-69.

Cotton Development and Physiology

Cotton (Gossypium hirsutum) has one of the most complex growth habits of any major row crop. It is an indeterminate perennial (managed as an annual) that produces vegetative and reproductive structures simultaneously over a long period. This requires careful management, often involving plant growth regulators (PGRs), to balance vegetative growth with boll development.

Vegetative Growth

Cotton emerges with two cotyledons (seed leaves). True leaves develop subsequently on the main stem. The plant produces two types of branches:

Vegetative Branches (Monopodia): These grow from the lower nodes on the main stem. They grow upward and function much like the main stem, producing their own fruiting branches.

Fruiting Branches (Sympodia): These develop from higher nodes on the main stem and the vegetative branches. They grow laterally and produce a flower at each node along the branch.

Reproductive Milestones

Squaring: The first reproductive structures are called "squares" (flower buds). Squaring typically begins around 35-45 days after planting, starting on the lowest fruiting branches.

Flowering (Bloom): About three weeks after the first square appears, the first flower opens. Cotton flowers are large and showy. They open as white or creamy yellow on the first day, turn pink or red on the second day, and eventually fall off, leaving a developing boll. Because cotton is indeterminate, it will continue to produce new squares and flowers as long as environmental conditions allow.

Boll Development: The developing fruit is a capsule called a boll. Boll development takes about 45 to 60 days from flowering to opening. The boll goes through three phases:

Enlargement: Rapid growth in size.

Filling: Deposition of cellulose inside the cotton fibers (lint).

Maturation: Drying and opening.

Cutout: This is a crucial physiological stage in cotton management. Cutout occurs when the plant's demand for carbohydrates (to fill developing bolls) exceeds its photosynthetic capacity (to produce new vegetative growth and squares). The plant effectively stops producing new terminal growth and focuses entirely on maturing the existing bolls. Agronomists often measure cutout as the point when there are only 5 nodes above the uppermost first-position white flower (NAWF = 5).

Defoliation and Harvest: Once the bolls are mature and open, chemical defoliants are applied to remove the leaves and prepare the crop for mechanical harvesting.

Cotton management is a delicate balancing act. Excessive nitrogen or water can lead to rank vegetative growth, delayed maturity, and reduced yield. Management relies heavily on monitoring square retention and boll development to make timely decisions.