Study guide
2.1 Macro, Secondary, and Micronutrients in Agronomy
Certified Crop Adviser International
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview & Certified Crop Adviser Certification
1.1 International CCA Exam Structure & Testing Format 1.2 CCA Certification Requirements, Ethics & CEUs
2 Chapter 2: Essential Soil Fertility & Plant Nutrition
2.1 Macro, Secondary, and Micronutrients in Agronomy 2.2 Soil Chemical Properties, CEC, and Nutrient Availability 2.3 Nutrient Mobility in Soil and Plant Deficiency Symptoms
3 Chapter 3: Nitrogen Dynamics & Fertilizer Management
3.1 The Nitrogen Cycle: Mineralization, Immobilization & Transformations 3.2 Nitrogen Loss Pathways: Volatilization, Nitrification & Leaching 3.3 Nitrogen Fertilizer Sources, Inhibitors & Application Strategies
4 Chapter 4: Phosphorus, Potassium & Secondary Nutrients
4.1 Soil Phosphorus Chemistry, Fixation & Availability 4.2 Soil Potassium Forms, Release Mechanisms & Crop Requirements 4.3 Secondary Nutrients (Ca, Mg, S) and Micronutrient Management
5 Chapter 5: Soil Testing, Liming & 4R Stewardship
5.1 Soil Sampling Protocols & Laboratory Analysis Interpretation 5.2 Soil Acidification, Liming Chemistry, CCE & Application Rates 5.3 4R Nutrient Stewardship & Manure Nutrient Management
6 Chapter 6: Soil Physical Properties & Organic Matter
6.1 Soil Textural Triangle, Pore Space & Bulk Density 6.2 Soil Organic Matter Dynamics, Carbon Cycling & Soil Health 6.3 Soil Compaction Causes, Measurement & Remediation 6.4 Site Characterization: Soil Horizons, Surveys & Landscape Analysis
7 Chapter 7: Soil Hydrology, Drainage & Erosion Control
7.1 Soil Water Availability, Infiltration & Matric Potential 7.2 Water & Wind Erosion Mechanics, RUSLE & Conservation Practices 7.3 Subsurface Tile & Surface Drainage System Design
8 Chapter 8: Irrigation Management & Soil Salinity
8.1 Irrigation System Types, Evapotranspiration & Scheduling 8.2 Irrigation Water Quality, SAR & Boron Toxicity 8.3 Saline & Sodic Soil Diagnosis, Reclamation & Management 8.4 Water Quality Protection: Eutrophication, Nitrate & Wellhead Safety
9 Chapter 9: Integrated Pest Management Principles & Scouting
9.1 IPM Principles, Economic Injury Levels & Action Thresholds 9.2 Field Scouting Protocols, Sampling Patterns & Diagnostic Tools 9.3 Pest Resistance Mechanisms & Resistance Management Strategies 9.4 Pesticide Stewardship: Spray Drift, Handler Safety & Worker Protection
10 Chapter 10: Weed Science & Herbicide Management
10.1 Weed Life Cycles, Seed Bank Dynamics & Competition 10.2 Herbicide Classification, HRAC Groups & Sites of Action 10.3 Herbicide Carryover, Environmental Fate & Selectivity
11 Chapter 11: Agricultural Entomology & Insect Control
11.1 Insect Orders, Metamorphosis & Feeding Mechanisms 11.2 Economic Crop Pests Identification & Threshold-Based Control 11.3 Insecticide IRAC Groups, Biological Control & Insect Resistance Management
12 Chapter 12: Plant Pathology & Crop Disease Management
12.1 The Disease Triangle, Pathogen Types & Diagnosis 12.2 Major Field Crop Diseases & Infection Cycles 12.3 Fungicide FRAC Groups, Cultural Controls & Integrated Disease Management
13 Chapter 13: Crop Physiology, Staging & Growth
13.1 Corn Growth Staging (V1-Vn, R1-R6) & Yield Components 13.2 Soybean Growth Staging (V1-Vn, R1-R8) & Physiology 13.3 Small Grains Feekes/Zadoks Scales & Cotton Development 13.4 Growing Degree Days (GDD) & Thermal Unit Calculations
14 Chapter 14: Tillage, Cropping Systems & Cover Crops
14.1 Conventional, Reduced, Strip-Till & No-Till System Comparison 14.2 Crop Rotation Agronomics, Pest Break & Yield Penalty Avoidance 14.3 Cover Crop Species Selection, Establishment & Termination Methods 14.4 Soil Management Effects on Air Quality & Greenhouse Gas Emissions
15 Chapter 15: Hybrid Selection, Planting & Seeding
15.1 Seed Genetics, Hybrid/Variety Selection & Disease Traits 15.2 Seeding Rate Calculations, Planting Depth & Row Spacing 15.3 Seed Quality, Germination Testing & Seed Treatment Chemistry
16 Chapter 16: Precision Agriculture & Smart Farming
16.1 GNSS Positioning, GIS Spatial Mapping & Remote Sensing (NDVI) 16.2 Variable Rate Technology (VRT) for Lime, Fertilizer & Seed 16.3 Yield Monitor Calibration, Spatial Data Analysis & Prescription Maps
17 Chapter 17: Harvest, Storage & Post-Harvest Quality
17.1 Harvest Timing Determination & Field Grain Loss Assessment 17.2 Grain Drying Dynamics, Moisture Management & Aeration 17.3 Stored Grain Pest Management, Aeration & Sanitation 17.4 Crop Production Economics: ROI, Commodity Pricing & Risk Management
2.1 Macro, Secondary, and Micronutrients in Agronomy
Key Takeaways Explain This Topic AI
Plants require 17 essential elements to complete their life cycle, categorized by the relative amounts required.
Primary macronutrients (N, P, K) are needed in large quantities and are most often the focus of fertilization programs.
Secondary macronutrients (Ca, Mg, S) are required in moderate amounts but are equally crucial for structural and enzymatic functions.
Micronutrients (Fe, Mn, Zn, Cu, B, Mo, Cl, Ni) are needed in trace amounts but can severely limit yield if deficient.
Last updated: July 2026
The foundation of agronomic crop production lies in understanding plant nutrition. For a plant to grow, develop, and complete its life cycle (i.e., produce viable seed), it requires certain chemical elements. According to the criteria of essentiality established by Arnon and Stout in 1939, an element is considered essential if: (1) a deficiency of it makes it impossible for the plant to complete the vegetative or reproductive stage of its life cycle, (2) such deficiency is specific to the element in question and can be prevented or corrected only by supplying this element, and (3) the element is directly involved in the nutrition of the plant, distinct from correcting some microbiological or chemical condition of the soil.
To date, 17 elements are universally recognized as essential for all higher plants. These are divided into non-mineral and mineral nutrients based on their source, and further sub-divided into macronutrients, secondary nutrients, and micronutrients based on the relative quantities required by plants.
Non-Mineral Essential Nutrients
Carbon (C), Hydrogen (H), and Oxygen (O) are considered non-mineral nutrients because plants obtain them primarily from the air (carbon dioxide) and water. These three elements constitute approximately 94% to 95% of the dry weight of most plants. They form the fundamental backbone of all organic molecules, including carbohydrates, proteins, lipids, and nucleic acids. Through the process of photosynthesis, plants fix atmospheric CO2 and combine it with water to synthesize simple sugars, driven by light energy.
Primary Macronutrients
The primary macronutrients are Nitrogen (N), Phosphorus (P), and Potassium (K). They are required in the largest quantities (usually measured in parts per hundred or percentages of dry tissue) and are the most commonly deficient nutrients in agricultural soils, thus demanding regular supplementation through fertilizers, manures, or biological fixation.
Nitrogen (N): Taken up primarily as Nitrate (NO3-) and Ammonium (NH4+), nitrogen is a crucial component of amino acids, which are the building blocks of proteins and enzymes. It is also an integral part of the chlorophyll molecule, making it essential for photosynthesis. Nitrogen promotes rapid vegetative growth, increases crop yield, and improves grain quality (protein content). Typical plant tissue concentrations range from 1.5% to 5.0%.
Phosphorus (P): Absorbed mainly as primary orthophosphate (H2PO4-) and secondary orthophosphate (HPO4^2-), depending on soil pH. Phosphorus plays a central role in energy storage and transfer within the plant, forming the energetic backbone of ATP (adenosine triphosphate) and ADP. It is also a structural component of nucleic acids (DNA and RNA) and phospholipids in cell membranes. Phosphorus is particularly vital for early root development, seed formation, and crop maturity. Plant tissue concentrations generally range from 0.1% to 0.5%.
Potassium (K): Taken up as the Potassium ion (K+). Unlike N and P, potassium does not become part of the organic structural components of the plant. Instead, it remains in ionic form and serves as a major osmoticum. K+ regulates the opening and closing of stomata, thus controlling water use efficiency and gas exchange. It also activates over 60 different enzymes involved in protein synthesis and carbohydrate metabolism. Adequate potassium improves disease resistance, stem strength (reducing lodging), and winter hardiness. Tissue concentrations range from 1.0% to 5.0%.
Secondary Macronutrients
Calcium (Ca), Magnesium (Mg), and Sulfur (S) are termed secondary nutrients. They are required in amounts similar to, or slightly less than, the primary macronutrients, but they are historically less likely to be deficient in many soils.
Calcium (Ca): Taken up as Ca2+, calcium is structurally critical. It binds with pectins in the middle lamella to cement cell walls together, ensuring structural integrity and proper cell division and elongation. Calcium also acts as an intracellular messenger for environmental stress responses. Because it is highly immobile in the plant, a continuous supply is required for growing tips and roots.
Magnesium (Mg): Absorbed as Mg2+. Magnesium is the central atom in the chlorophyll molecule, making it absolutely indispensable for photosynthesis. It also serves as a cofactor for numerous enzymes, particularly those involved in ATP synthesis and the transfer of phosphate groups.
Sulfur (S): Absorbed primarily as Sulfate (SO4^2-). Sulfur is an essential component of three amino acids (cystine, cysteine, and methionine), meaning it is required for protein synthesis. It also plays a role in the synthesis of vitamins (like biotin and thiamine) and coenzymes. Sulfur is particularly important for nodulation and nitrogen fixation in legumes and contributes to the pungent flavors in crops like onions and mustard.
Micronutrients
Micronutrients are required in minute quantities (measured in parts per million, ppm) but are no less essential than macronutrients. Their primary role is often as components or activators of enzymes.
Iron (Fe): Taken up as Fe2+ or Fe3+. Essential for chlorophyll synthesis (though not a structural part of it) and electron transfer in photosynthesis and respiration.
Manganese (Mn): Taken up as Mn2+. Plays a critical role in the photolysis of water (splitting of water molecules) during photosynthesis.
Zinc (Zn): Taken up as Zn2+. Required for the synthesis of tryptophan (a precursor to the auxin indoleacetic acid, IAA), making it vital for growth hormone production.
Copper (Cu): Taken up as Cu2+. Involved in lignin synthesis, respiration, and photosynthesis.
Boron (B): Taken up as uncharged boric acid (H3BO3). Essential for cell wall formation, pollen tube growth, and sugar transport.
Molybdenum (Mo): Taken up as molybdate (MoO4^2-). Required for the nitrate reductase enzyme (converting nitrate to nitrite) and nitrogenase enzyme in nitrogen-fixing bacteria.
Chlorine (Cl): Taken up as Cl-. Involved in stomatal regulation and the splitting of water in photosynthesis.
Nickel (Ni): Taken up as Ni2+. The most recently recognized essential nutrient. It is a critical component of the enzyme urease, which breaks down urea to prevent toxic accumulations in plant tissues.
Summary of Essential Nutrients and Uptake Forms
- Nutrient Class Element Symbol Primary Uptake Form(s)
- Non-Mineral Carbon C CO2
- Non-Mineral Hydrogen H H2O
- Non-Mineral Oxygen O O2, CO2, H2O
- Primary Macro Nitrogen N NO3-, NH4+
- Primary Macro Phosphorus P H2PO4-, HPO4^2-
- Primary Macro Potassium K K+
- Secondary Macro Calcium Ca Ca2+
- Secondary Macro Magnesium Mg Mg2+
- Secondary Macro Sulfur S SO4^2-
- Micro Iron Fe Fe2+, Fe3+
- Micro Manganese Mn Mn2+
- Micro Zinc Zn Zn2+
- Micro Copper Cu Cu2+
- Micro Boron B H3BO3, BO3^3-
- Micro Molybdenum Mo MoO4^2-
- Micro Chlorine Cl Cl-
- Micro Nickel Ni Ni2+
Proper agronomic management requires a balanced approach to soil fertility, ensuring that all 14 essential mineral nutrients are available in sufficient quantities and in the proper ratios.