Study guide

0.2 Perioperative Role & Scope of Practice of the Certified Anesthesia Technologist

ASATT Certified Anesthesia Technologist Cer.A.T.T.

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

0.1 ASATT Cer.A.T.T. Credential, Eligibility Pathways & Examination Format 0.2 Perioperative Role & Scope of Practice of the Certified Anesthesia Technologist 0.3 Study Strategies, Blueprint Weighting & Examination Day Protocols

2 Medical Gas Supply Systems & Machine Pneumatics

1.1 Compressed Gas Cylinders, Color Codes, Capacities & Safe Handling 1.2 Cylinder & Pipeline Safety Systems (PISS, DISS, Quick-Connects) 1.3 Anesthesia Machine High- & Intermediate-Pressure Pneumatics

3 Flow Control, Vaporizers & Breathing Circuits

2.1 Flowmeters, Proportioning Systems & Anti-Hypoxic Safety Links 2.2 Anesthetic Vaporizers: Physics, Types & Interlock Systems 2.3 Carbon Dioxide Absorbents & Rebreathing Circle Systems 2.4 Non-Rebreathing Systems & Waste Gas Scavenging

4 Mechanical Ventilators & Anesthetic Machine Checkout

3.1 Anesthesia Ventilators: Bellows, Pistons & Drive Mechanisms 3.2 Ventilator Alarms, Pressure-Volume Loops & Sensor Calibration 3.3 Pre-Use Anesthesia Machine Checkout & Low-Pressure Leak Testing

5 Airway Equipment & Difficult Airway Adjuncts

4.1 Face Masks, Oral/Nasal Airways & Supraglottic Devices 4.2 Direct & Video Laryngoscopy Systems 4.3 Endotracheal & Endobronchial Tubes 4.4 Airway Setup, ASA Difficult Airway Guidelines & Emergency Adjuncts

6 Physiologic Monitoring Systems & Hemodynamics

5.1 Noninvasive Hemodynamic Monitoring & Pulse Oximetry 5.2 Capnography, Gas Analysis & Arterial Blood Gas Interpretation 5.3 Invasive Arterial & Central Venous Pressure Monitoring 5.4 Pulmonary Artery Catheters, Intracranial Pressure & Depth of Anesthesia Monitoring

7 Neuromuscular Monitoring & Ancillary OR Devices

6.1 Peripheral Nerve Stimulation & Neuromuscular Blockade Assessment 6.2 Thermal Management & Fluid Infusion Technology 6.3 Point-of-Care Testing, TEG, Intra-Aortic Balloon Pump & Autologous Blood Salvage

8 Cardiovascular, Pulmonary & Nervous System Anatomy & Physiology

7.1 Cardiovascular Anatomy, Cardiac Cycle & Major Vascular Pathways 7.2 Pulmonary Anatomy, Mechanics of Breathing & Gas Transport 7.3 Nervous System Anatomy: Autonomic, Central & Peripheral Nerve Conduction

9 Organ System Physiology & Perioperative Pathophysiology

8.1 Endocrine, Hepatic & Renal Anatomy & Physiology 8.2 Cardiovascular & Pulmonary Pathophysiologies 8.3 Neurologic, Endocrine & Musculoskeletal Pathophysiologies 8.4 Hepatic, Renal & Gastrointestinal Pathophysiologies 8.5 Immune Disorders, Trauma, Burns, Shock, Substance Use & Organ Transplantation 8.6 Malignant Hyperthermia Pathophysiology & Crisis Response

10 Inhalational Anesthetics, Intravenous Inductions & Sedatives

9.1 Inhalation Anesthetics & Nitrous Oxide 9.2 Intravenous Induction Agents & Sedative-Hypnotics 9.3 Perioperative Opioid Analgesics, Ketorolac & Reversal

11 Neuromuscular Blockers, Reversal & Autonomic Drugs

10.1 Depolarizing Muscle Relaxants: Succinylcholine 10.2 Non-Depolarizing Neuromuscular Blockers 10.3 Neuromuscular Reversal Pharmacology & Physostigmine 10.4 Vasoactive, Antidysrhythmic & Emergency Perioperative Medications

12 Local Anesthetics, LAST & Specialty Perioperative Pharmacology

11.1 Local Anesthetics: Chemistry, Mechanism & Systemic Toxicity 11.2 Anticoagulation, Reversal & Hemostatic Agents 11.3 Bronchodilators, Diuretics, Antacids, Corticosteroids & Uterotonics

13 Occupational Safety, Airway Preparation & Intravenous Therapy

12.1 Operating Room Electrical Safety & Waste Anesthetic Gas Management 12.2 Surgical Fire Prevention & Airway Fire Protocol 12.3 Intravenous Line Setup, Catheter Poiseuille Mechanics & Rapid Infusion

14 Patient Positioning & Regional Anesthesia Support

13.1 Surgical Patient Positioning: Physiology, Nerve Vulnerabilities & Complications 13.2 Neuraxial Anesthesia Setup & Techniques 13.3 Peripheral Nerve Blocks & Ultrasound Guidance 13.4 Intravenous Regional Anesthesia (Bier Block) & Nerve Stimulator Techniques

15 Anesthesia for Surgical Subspecialties

14.1 Laparoscopic & Intra-Abdominal Surgery 14.2 Thoracic Surgery & One-Lung Ventilation Support 14.3 Orthopedic, Spine & Major Vascular Surgery 14.4 Transurethral Resection of the Prostate (TURP) Syndrome & Urologic Procedures

16 Out-of-OR Anesthesia, Shared Airway & Perioperative Resuscitation

15.1 Non-Operating Room Anesthesia (NORA): MRI, Endoscopy, Interventional, Pain & Labor Suites 15.2 Shared Airway Management, ENT & Laser Surgery 15.3 Advanced Cardiovascular Life Support (ACLS) in the Perioperative Environment

17 Infection Control, Regulatory Compliance & Professional Standards

16.1 Infection Control, Spaulding Classification & Reprocessing Standards 16.2 Regulatory Agencies & Healthcare Accreditation (AABB, CLIA, DHS, OSHA, TJC) 16.3 ASATT Standards, Professional Ethics & Scope of Practice

0.2 Perioperative Role & Scope of Practice of the Certified Anesthesia Technologist

Key Takeaways Explain This Topic AI

Under the ASATT Scope of Practice (revised September 2023), certified anesthesia technologists work under the direction of an anesthesia provider as members of the anesthesia care team.

ASATT validates peripheral IV catheter insertion for Certified Anesthesia Technologists and prefers that they operate cell salvage, TEE, IABP, and point-of-care testing devices.

A Cer.A.T.T. renews with 30 CEUs every two years and must hold ACLS, while a Cer.A.T. renews with 20 CEUs and must hold BLS.

Technologists level transducers to the phlebostatic axis, zero them to atmosphere, and use a fast-flush square-wave test to identify overdamped or underdamped arterial lines.

Topical hemostatic agents should never be aspirated into a cell saver, and a salvaged blood bag that contains air must never be placed in a pressure infuser.

Last updated: September 2026

  • Professional Scope & Regulatory Framework
  • ASATT Scope of Practice (September 2023 Revision)

The ASATT Scope of Practice defines the clinical functions ASATT validates for certified anesthesia technology personnel through standardized education and the national certification examination. It states that anesthesia technologists and technicians work under the direction of an anesthesia provider as members of the anesthesia care team recognized in American Society of Anesthesiologists (ASA) practice guidelines. ASATT does not outline a scope for non-certified technicians; the document applies only to holders of an active, unencumbered Cer.A.T. or Cer.A.T.T.

A scope of practice is the legally authorized boundary for the assessment, intervention, and level of care a practitioner may provide. The Scope document notes that scope is found in federal laws, Medicare regulations, accreditation standards, clinical settings, job descriptions, hospital policies, and legal opinions. An employer may narrow a technologist's functions through a job description or policy, but it may not allow an employee to work outside the legal scope. Practicing outside scope creates legal liability for the practitioner, the supervisor, and the organization.

Boundaries in Day-to-Day Practice

Medications: Technologists must know drug classes, side effects, interactions, and ACLS/PALS medication sequences, and they keep medications in date and dispose of remnants properly. Administering medications remains a function defined by state law and institutional policy for licensed providers.

Vascular access: ASATT validates peripheral intravenous catheter insertion for Certified Anesthesia Technologists. Arterial and central venous cannulation are performed by the anesthesia provider; the technologist prepares, primes, levels, zeros, and troubleshoots the monitoring system and understands its indications.

Local competencies: Facilities document which validated functions each technologist performs, and those local limits can be narrower than the ASATT scope.

Differentiating Technologists (Cer.A.T.T.) from Technicians (Cer.A.T.)

The Scope of Practice lists most competencies for both credentials: airway management and ventilation support, fluid and blood component management, pharmacology, pathophysiology and anesthesia management, biotechnology and monitoring equipment, and critical event management. The distinctions it draws are specific:

Scope Element Certified Anesthesia Technician (Cer.A.T.) Certified Anesthesia Technologist (Cer.A.T.T.)

How the credential was earned Two-domain technician exam (retired in 2015), previously after two years of work as a technician Comprehensive six-domain exam after an accredited or approved program, the Advancement pathway, or the Practical Experience Pathway

  • Renewal 20 CEUs every two years 30 CEUs every two years plus ACLS
  • Life support AHA BLS required AHA BLS and ACLS required; PALS recommended in pediatric-heavy settings

IV access and fluids Shared fluid and blood knowledge Validated for IV catheter insertion, choosing fluid types with provider confirmation, ABO/Rh knowledge, and assisting licensed staff with blood product checks

Devices ASATT prefers a Cer.A.T.T. to operate Not designated Cell saver, TEE, intra-aortic balloon pump, the mechanical function of local anesthetic infusions (with a provider present), and point-of-care testing (ACT, ABG, i-STAT chemistry, glucometry, HemoCue hemoglobin/hematocrit, ROTEM, TEG)

Where Certified Technologists Work

The Scope lists operating rooms, obstetric suites, interventional and diagnostic radiology, the PACU, ICU, catheterization laboratory, emergency room, endoscopy areas, dental suites, ambulatory surgery suites, animal and research laboratories, and MRI.

Regulatory Compliance Duties Named in the Scope

Follow The Joint Commission (TJC) accreditation policies, sentinel event and national patient safety goal requirements, and environment-of-care rules

Keep sterile supplies within expiration dates and rotate inventory by accepted standards

Follow Material Safety Data Sheet (now Safety Data Sheet) guidance on hazardous materials and OSHA guidelines for anesthesia and patient safety

Keep maintenance records for essential anesthetic equipment and run quality control after repair or service

Know College of American Pathologists (CAP) and CMS Clinical Laboratory Improvement Amendments (CLIA) rules for ancillary laboratories, and follow AABB recommendations for banked and salvaged blood

  • Help prepare the department's capital budget and train or orient staff as needed
  • Core Clinical Functions Across the Phases of Anesthesia
  • 1. Pre-Induction: Workstation & Environment Verification

Before every patient, the Cer.A.T.T. performs a systematic equipment evaluation that follows the 2008 ASA Recommendations for Pre-Anesthesia Checkout Procedures :

High-Pressure System Inspection : Verifies backup cylinders are seated with correct Pin Index Safety System (PISS) configurations and that the auxiliary oxygen cylinder is at least about half full (roughly 1,000 psig; a full cylinder reads about 1,900–2,200 psig).

Intermediate-Pressure System : Connects pipeline gas hoses utilizing Diameter Index Safety System (DISS) connections and confirms pipeline pressures maintain 50 to 55 psig.

Low-Pressure System & Vaporizers : Verifies vaporizers are properly mounted on the interlock manifold, tightly locked, adequately filled with appropriate anesthetic agents, with filler ports sealed; performs negative-pressure leak testing on machines with check valves.

Breathing Circuit & Absorbent : Checks circle system integrity by closing the APL valve, occluding the Y-piece, pressurizing the circuit to 30 cmH2O, and confirming the pressure holds for at least 10 seconds; examines carbon dioxide absorbent granules for exhaustion (ethyl violet color changes) or desiccation.

Scavenging & Suction : Connects active/passive scavenging systems, ensuring scavenging interface relief valves are patent and vacuum flow is set in the indicated range; verifies suction is strong enough to clear the airway.

2. Induction & Rapid Sequence Induction (RSI)

During the vulnerable period of anesthetic induction, the technologist functions at the head of the operating table alongside the anesthesia provider:

Pre-Oxygenation & Seal : Assists with establishing an airtight mask seal delivering 100% oxygen to achieve denitrogenation, commonly targeting an end-tidal oxygen concentration (EtO2) of about 90%.

Rapid Sequence Induction (RSI) : When indicated for patients at high risk of pulmonary aspiration (e.g., full stomach, bowel obstruction, acute trauma, severe gastroesophageal reflux, pregnancy), the technologist assists with:

Precise application of cricoid pressure (Sellick's maneuver) upon loss of consciousness when requested by the provider, applying approximately 10 Newtons of force initially and increasing to 30 Newtons to occlude the esophageal lumen against the C6 vertebral body without distorting the laryngeal cartilages.

Immediate handoff of the direct or video laryngoscope blade upon muscle relaxant onset.

Smooth withdrawal of the intubating stylet as the endotracheal tube passes the vocal cords.

Cuff inflation using an aneroid endotracheal tube manometer , titrating cuff pressure strictly to 20 to 30 cmH2O . This range is critical: pressures below 20 cmH2O permit micro-aspiration of secretions around the cuff, while pressures exceeding 30 cmH2O exceed capillary perfusion pressure of the tracheal mucosa (~30 mmHg or ~40 cmH2O), causing mucosal ischemia, ulceration, and tracheal stenosis.

Immediate verification of ventilation via continuous end-tidal carbon dioxide (EtCO2) waveform capnography and bilateral chest auscultation.

3. Invasive Hemodynamic Line Support

The Cer.A.T.T. is responsible for setting up, priming, calibrating, and troubleshooting invasive monitoring systems:

System Preparation : Primes rigid, non-compliant pressure tubing with 500 mL of 0.9% normal saline (plain or heparinized per institutional policy). Pressurizes the pneumatic flush bag to 300 mmHg , which drives the continuous micro-flush device to deliver 3 mL/hr of flush solution to maintain catheter patency and prevent thrombus formation.

Zero-Referencing & Leveling :

Levels the air-fluid interface stopcock of the transducer precisely to the phlebostatic axis , defined anatomically as the intersection of the fourth intercostal space and the mid-axillary line (representing the level of the right atrium).

Closes the stopcock to the patient, opens it to atmospheric pressure, and initiates zero calibration on the physiologic monitor.

Hydrostatic Physics : The physical position of the transducer dictates measurement accuracy. For every 1 inch (2.54 cm) the transducer is placed above the phlebostatic axis , the hydrostatic fluid column decreases the measured blood pressure by approximately 1.86 mmHg (or ~0.74 mmHg per cm). Conversely, placing the transducer below the phlebostatic axis creates an artificial hydrostatic pressure increase.

Dynamic Response (Square-Wave) Testing :

Performed by activating the fast-flush pigtail valve to expose the transducer to 300 mmHg of pressure, observing the resulting waveform and post-flush oscillations.

Adequately Damped System : Displays a steep vertical square wave followed by 1 to 2 rapid oscillations before returning to baseline arterial pulsation.

Underdamped System : Displays multiple ringing oscillations (>3 oscillations) with an exaggerated, artifactually high systolic spike and an artificially low diastolic pressure. Caused by excessive tubing length (>150–200 cm), multiple stopcocks, or patient hyperdynamic states.

Overdamped System : Displays a sluggish, blunted waveform with no post-flush oscillations, artifactually low systolic pressure, and artifactually high diastolic pressure. Caused by entrapped air bubbles in the transducer chamber or tubing, blood clots at the catheter tip, compliant (soft) extension tubing, or loose connections.

Dynamic Response Characteristics Matrix

Dynamic Response State Waveform Morphology Post-Flush Oscillations Systolic Pressure Artifact Diastolic Pressure Artifact Common Technical Etiologies

Optimal Damping Crisp upstroke, distinct dicrotic notch 1–2 oscillations Accurate Accurate Correct tubing length (<150 cm), rigid lines, bubble-free

Underdamped Sharp overshoot, accentuated dicrotic notch >3 oscillations (ringing) Falsely elevated Falsely depressed Excessive tubing length, multiple stopcock manifolds

Overdamped Slurred upstroke, absent dicrotic notch 0 oscillations Falsely depressed Falsely elevated Entrapped air bubbles, micro-clots, soft compliant tubing

4. Autologous Blood Recovery (Intraoperative Cell Salvage)

During procedures with anticipated substantial blood loss (>1,000 mL, such as cardiac, major vascular, orthopedic spine, or trauma surgery), the Cer.A.T.T. manages autologous red blood cell recovery:

Anticoagulation Setup : Assembles the double-lumen suction line connected to a collection reservoir. Primes the line with anticoagulant: either Acid Citrate Dextrose Solution A (ACD-A) or heparinized normal saline (typically 30,000 USP units unfractionated heparin per 1,000 mL 0.9% NaCl).

Titration Ratio : Regulates anticoagulant infusion at a ratio of 1:5 to 1:7 (approximately 15 to 20 mL of anticoagulant per 100 mL of collected blood ). Suction vacuum must be maintained between -100 and -150 mmHg ; excessive vacuum (>150 mmHg) induces mechanical shear stress and red blood cell hemolysis.

Centrifugal Separation & Washing : Within the rotating centrifuge bowl (Latham or continuous bowl), whole blood is separated by density into red blood cells, buffy coat (platelets/leukocytes), and supernatant plasma. The packed red cells are washed with 0.9% normal saline (minimum 500 to 1,000 mL wash volume) until the waste effluent is visually transparent. The final washed product typically has a hematocrit of about 50% to 65% , suspended in normal saline, with most of the anticoagulant, plasma, free hemoglobin, and activated clotting factors removed.

Absolute Contraindications & Contaminants :

Topical Hemostatic Agents : Microfibrillar collagen (Avitene), oxidized regenerated cellulose (Surgicel), topical thrombin, and gelatin sponges (Gelfoam) must not be aspirated into the cell saver. Washing may not reliably remove these procoagulant materials, and reinfusion can activate clotting and contribute to disseminated intravascular coagulation (DIC). Suction is diverted to wall waste suction while hemostatics are in the field.

Irrigants & Cleansers : Sterile water (causes immediate osmotic hemolysis), hydrogen peroxide, chlorhexidine, and betadine.

Malignancy & Gross Infection : Aspiration through active tumor fields or gross gastrointestinal bowel contamination is contraindicated unless specialized leukocyte-depletion microaggregate filters are utilized under life-saving clinical exemptions.

Fatal Air Embolism Prevention : Reinfusion bags must NEVER be placed inside a mechanical or pneumatic pressure infuser bag without first completely evacuating all air from the reinfusion bag. Autologous reinfusion bags contain air; applying external pressure drives air directly into the patient's venous circulation, causing massive, fatal venous air embolism.

5. Point-of-Care Testing (POCT) & Quality Assurance

The Cer.A.T.T. operates diagnostic analyzers within the surgical theater under Clinical Laboratory Improvement Amendments (CLIA) standards:

Activated Clotting Time (ACT) : Crucial during systemic heparinization for cardiopulmonary bypass or vascular cross-clamping. Baseline ACT is typically 80 to 120 seconds . Full systemic heparinization for cardiopulmonary bypass requires an ACT greater than 400 to 480 seconds prior to cannulation. After protamine reversal, ACT is rechecked to confirm it has returned toward baseline.

Blood Gas & Electrolytes : Evaluates arterial blood gases (pH, PaCO2, PaO2, HCO3-, base excess), hemoglobin/hematocrit, lactate, and ionized calcium (vital for myocardial contractility during rapid blood transfusions).

Quality Control : Runs required quality control (electronic checks and liquid controls at the frequency set by CLIA, the manufacturer, or an approved IQCP), documents calibration verifications, and ensures results interface seamlessly with the electronic health record (EHR).

6. Difficult Airway Cart Management

The technologist maintains immediate readiness of the ASA Difficult Airway Algorithm Cart :

Video Laryngoscopy : Inspects and tests rigid hyperangulated blades (e.g., GlideScope) and standard geometry blades (e.g., McGrath, C-MAC), ensuring batteries are charged and recording monitors functional.

Flexible Intubating Bronchoscopes : Verifies white balance, focus, optical lens integrity, light source intensity, and suction channel patency.

Supraglottic Airway Conduits : Stocks second-generation supraglottic devices (e.g., LMA ProSeal, LMA Supreme, i-gel) and intubating conduits (LMA Fastrach).

Emergency Surgical Airway : Verifies that scalpel-bougie-tube cricothyrotomy kits and percutaneous Seldinger kits are stocked and within expiration dates for the provider's use.

7. Professional Ethics & Intraoperative Communication

Technologists are vital advocates for perioperative patient safety, employing Crew Resource Management (CRM) principles:

Closed-Loop Communication : Actively repeats back instructions, drug dosages, gas pipeline changes, and diagnostic values to eliminate ambiguity.

Speaking Up for Safety : Utilizes the structured CUS communication framework when observing safety breaches (e.g., circuit disconnects, contamination, unverified medications): "I am C oncerned, I am U ncomfortable, this is a S afety issue."