Study guide

13.1 Metric System, Percent Solutions & Dilutions

ASCP Histotechnician HT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Fixation Principles & Aldehyde Fixatives

1.1 Principles and Chemistry of Fixation 1.2 Formalin Formulations and Aldehydes 1.3 Fixation Artifacts and Pigment Removal

2 Chapter 2: Compound Fixatives & Specimen Management

2.1 Metallic and Compound Fixatives 2.2 Non-Additive Fixatives & Special Fixation Applications 2.3 Specimen Accessioning, Grossing & Special Tissue Handling

3 Chapter 3: Tissue Processing Sequence & Reagents

3.1 Dehydration Principles and Reagents 3.2 Clearing Agents, Solvents & Safety Alternatives 3.3 Infiltration Media, Paraffin Properties & Additives

4 Chapter 4: Processors, Protocols & Decalcification

4.1 Automated Tissue Processors, Protocols & Maintenance 4.2 Decalcification Chemistry: Acid vs. Chelating Agents 4.3 Decalcification Endpoints, Artifacts & Surface Decal

5 Chapter 5: Embedding & Microtomy Techniques

5.1 Tissue Orientation & Paraffin Embedding Protocols 5.2 Rotary Microtome Mechanics, Knives & Clearance Angle 5.3 Sectioning Technique, Flotation Bath & Slide Adhesives

6 Chapter 6: Microtomy Artifacts & Cryotomy

6.1 Microtomy Artifacts, Defects & Troubleshooting 6.2 Cryostat Operation, Frozen Sections & Temperature Control 6.3 Cryosectioning Artifacts, Rapid Stains & Cryostat Safety

7 Chapter 7: Routine Hematoxylin & Eosin (H&E) Staining

7.1 Dye Chemistry, Mordants & Hematoxylin Formulations 7.2 Eosin Formulations, Differentiation & Bluing Agents 7.3 Automated Staining, Mounting, Coverslipping & H&E QC

8 Chapter 8: Special Stains — Carbohydrates & Connective Tissue

8.1 Glycogen, Neutral Mucins & Periodic Acid-Schiff (PAS) 8.2 Acid Mucins & Proteoglycans: Alcian Blue & Mucicarmine 8.3 Connective Tissue: Masson Trichrome & Collagen Stains 8.4 Basement Membranes, Movat Pentachrome & Multi-Element Connective Tissue Stains

9 Chapter 9: Special Stains — Fibers, Microorganisms, Pigments, Minerals & Lipids

9.1 Reticular & Elastic Fibers: Silver Impregnation & Verhoeff Stains 9.2 Microorganism Demonstration: Bacteria, Fungi & Spirochetes 9.3 Pigments, Minerals & Amyloid Demonstration 9.4 Lipid Histochemistry: Oil Red O, Sudan Dyes & Frozen-Section Requirements

10 Chapter 10: Special Stains — Nerve, Bone Marrow, Cytology & Tissue Components

10.1 Nerve Tissue & Myelin: Luxol Fast Blue, Bielschowsky & Silver Methods 10.2 Bone Marrow & Hematopoietic Preparations: Romanowsky, Giemsa & Wright Stains 10.3 Cytologic Preparations, Cell Blocks & the Papanicolaou Stain 10.4 Fibrin, Mast Cells & Other Tissue Components: PTAH, Toluidine Blue & Metachromasia

11 Chapter 11: Immunohistochemistry (IHC) & Molecular Staining

11.1 Principles of Antigen-Antibody Binding & Selection 11.2 Antigen Retrieval (HIER vs. PIER) & Endogenous Blocking 11.3 Detection Systems, Chromogens, Controls & Troubleshooting

12 Chapter 12: Laboratory Safety, Quality Control & Operations

12.1 OSHA Chemical Safety & Formaldehyde Exposure Monitoring 12.2 Biological Safety, Sharps Handling & Hazardous Waste Management 12.3 Quality Assurance, CLIA/CAP Compliance & Records Retention 12.4 Compound Light Microscopy, Optics & Kohler Illumination

13 Chapter 13: Laboratory Mathematics, Ancillary Equipment & Reagent Quality Control

13.1 Metric System, Percent Solutions & Dilutions 13.2 Molar Solutions, Normality & Buffer Preparation 13.3 Ancillary Laboratory Equipment, Water Quality & Solvent Recovery

13.1 Metric System, Percent Solutions & Dilutions

Key Takeaways Explain This Topic AI

Percent weight per volume is grams of solute per 100 mL of finished solution, so grams needed equals percent multiplied by volume in millilitres divided by 100.

10 percent formalin means a 1:10 dilution of commercial 37 to 40 percent formaldehyde stock, which yields only 3.7 to 4.0 percent actual formaldehyde.

A 1:10 ratio dilution is one part solute plus nine parts diluent for a total of ten parts, not one part plus ten parts.

The dilution equation C1V1 equals C2V2 gives the volume of concentrated stock needed; the diluent volume is the final volume minus that stock volume.

Section thickness in micrometres converts to millimetres by dividing by 1000, so a 4 micrometre section is 0.004 mm thick.

Last updated: September 2026

13.1 Metric System, Percent Solutions & Dilutions

ASCP HT Exam Focus: The ASCP BOC content outline lists Laboratory Mathematics with three sub-topics: metric system , percent solutions/dilutions , and molar solutions . Calculation items are scored like any other question, and they are the most reliably earnable points on the examination because the answer is deterministic.

The Metric System

  • Prefix Symbol Multiplier
  • kilo k 10 3 10^{3} 1 0 3
  • deci d 10 − 1 10^{-1} 1 0 − 1
  • centi c 10 − 2 10^{-2} 1 0 − 2
  • milli m 10 − 3 10^{-3} 1 0 − 3
  • micro μ \mu μ 10 − 6 10^{-6} 1 0 − 6
  • nano n 10 − 9 10^{-9} 1 0 − 9
  • Conversions used daily in histology

1 L = 1000 mL 1\text{ L} = 1000\text{ mL} 1 L = 1000 mL ; 1 mL = 1000 μ L 1\text{ mL} = 1000\,\mu\text{L} 1 mL = 1000 μ L

1 g = 1000 mg 1\text{ g} = 1000\text{ mg} 1 g = 1000 mg ; 1 mg = 1000 μ g 1\text{ mg} = 1000\,\mu\text{g} 1 mg = 1000 μ g

1 mm = 1000 μ m 1\text{ mm} = 1000\,\mu\text{m} 1 mm = 1000 μ m , so a 4 micrometre section is 0.004 mm , and a 5 mm grossed slice is 5000 micrometres

1 ppm = 1 mg/L = 1 μ g/mL 1\text{ ppm} = 1\text{ mg/L} = 1\,\mu\text{g/mL} 1 ppm = 1 mg/L = 1 μ g/mL - the unit used for formaldehyde and xylene air monitoring

Temperature: ∘ C = ( ∘ F − 32 ) × 5 / 9 ^{\circ}\text{C} = (^{\circ}\text{F} - 32) \times 5/9 ∘ C = ( ∘ F − 32 ) × 5/9 . A 60 degrees C paraffin oven is 140 degrees F.

Exam trap: cassette and mold dimensions are given in millimetres, microtome settings in micrometres. A specimen grossed at 3 mm is 750 times thicker than the 4 micrometre section cut from it, which is exactly why penetration and processing schedules are thickness-driven.

Percent Solutions: Three Conventions

Convention Definition Typical histology use

% weight/volume (w/v) Grams of solute per 100 mL of finished solution Solid dyes and salts: silver nitrate, ammonium oxalate, potassium metabisulfite

% volume/volume (v/v) Millilitres of liquid solute per 100 mL of finished solution Acid alcohol, dilute acetic acid, graded alcohols

% weight/weight (w/w) Grams of solute per 100 g of solution How manufacturers label concentrated acids

The w/v formula Grams = % × final volume in mL 100 \text{Grams} = \frac{\%\ \times\ \text{final volume in mL}}{100} Grams = 100 % × final volume in mL ​

Worked example. Prepare 800 mL of 2.5 percent (w/v) potassium metabisulfite for a silver method: Grams = ( 2.5 × 800 ) / 100 = 20.0 g \text{Grams} = (2.5 \times 800)/100 = \mathbf{20.0\text{ g}} Grams = ( 2.5 × 800 ) /100 = 20.0 g , dissolved in water and brought to 800 mL.

The v/v formula mL solute = % × final volume in mL 100 \text{mL solute} = \frac{\%\ \times\ \text{final volume in mL}}{100} mL solute = 100 % × final volume in mL ​

Worked example. Prepare 500 mL of 1 percent (v/v) acid alcohol from concentrated hydrochloric acid and 70 percent ethanol: ( 1 × 500 ) / 100 = 5.0 mL (1 \times 500)/100 = \mathbf{5.0\text{ mL}} ( 1 × 500 ) /100 = 5.0 mL of concentrated HCl added slowly to 495 mL of 70 percent ethanol. Always add the acid to the alcohol, never the reverse.

"Bring to volume" versus "add to": a true percent solution is made by dissolving the solute in part of the solvent and then bringing the total to the final volume in a graduated cylinder or volumetric flask. Adding solute to a full final volume of solvent overshoots the volume and under-concentrates the reagent. For dilute working solutions the difference is small; for concentrated silver and dye solutions it is not.

The Formalin Trap

10 percent formalin is not 10 percent formaldehyde.

Commercial "formalin" is a saturated aqueous solution containing 37 to 40 percent formaldehyde gas with methanol as a stabilizer.

10 percent formalin means 100 mL of that commercial stock diluted to 1000 mL , which delivers 3.7 to 4.0 percent actual formaldehyde .

10 percent neutral buffered formalin (NBF) is the same 1:10 dilution made up in phosphate buffer to pH 6.8 to 7.2 .

This distinction is tested directly, and it also explains why a fixative labelled "4 percent paraformaldehyde" and one labelled "10 percent formalin" are chemically equivalent in formaldehyde content.

Ratio and Serial Dilutions

A ratio dilution written 1:10 means one part of the substance in a total of ten parts , which is one part solute plus nine parts diluent. The dilution factor is 10, so the concentration falls to one tenth.

Worked example - antibody titre. An immunohistochemistry protocol calls for a 1:400 working dilution in a final volume of 12 mL : V stock = 12 mL 400 = 0.03 mL = 30 μ L V_{\text{stock}} = \frac{12\text{ mL}}{400} = 0.03\text{ mL} = \mathbf{30\,\mu\text{L}} V stock ​ = 400 12 mL ​ = 0.03 mL = 30 μ L

Pipette 30 microlitres of antibody concentrate into 11.97 mL of antibody diluent.

Serial dilution. Antibody titration is performed as a doubling or tenfold series: 1:100, 1:200, 1:400, 1:800. Each tube carries forward a fixed volume into an equal or ninefold volume of diluent, so the total dilution is the product of the individual steps (a 1:10 followed by a 1:20 is a 1:200).

The Dilution Equation C 1 V 1 = C 2 V 2 ⇒ V 1 = C 2 × V 2 C 1 C_1V_1 = C_2V_2 \quad\Rightarrow\quad V_1 = \frac{C_2 \times V_2}{C_1} C 1 ​ V 1 ​ = C 2 ​ V 2 ​ ⇒ V 1 ​ = C 1 ​ C 2 ​ × V 2 ​ ​

where C 1 C_1 C 1 ​ is the stock concentration, V 1 V_1 V 1 ​ the stock volume required, C 2 C_2 C 2 ​ the desired concentration, and V 2 V_2 V 2 ​ the desired final volume. The diluent volume is V 2 − V 1 V_2 - V_1 V 2 ​ − V 1 ​ .

Worked example - graded alcohols. Prepare 1000 mL of 70 percent ethanol from 95 percent stock: V 1 = 70 × 1000 95 = 736.8 mL of 95 percent stock + 263.2 mL water V_1 = \frac{70 \times 1000}{95} = 736.8\text{ mL of 95 percent stock} + 263.2\text{ mL water} V 1 ​ = 95 70 × 1000 ​ = 736.8 mL of 95 percent stock + 263.2 mL water

Worked example - from absolute alcohol. Prepare 500 mL of 80 percent ethanol from 100 percent stock: V 1 = 80 × 500 100 = 400 mL absolute + 100 mL water V_1 = \frac{80 \times 500}{100} = 400\text{ mL absolute} + 100\text{ mL water} V 1 ​ = 100 80 × 500 ​ = 400 mL absolute + 100 mL water

Worked example - silver stock. Prepare 250 mL of 2 percent silver nitrate from a 20 percent stock: V 1 = 2 × 250 20 = 25 mL stock + 225 mL deionized water V_1 = \frac{2 \times 250}{20} = 25\text{ mL stock} + 225\text{ mL deionized water} V 1 ​ = 20 2 × 250 ​ = 25 mL stock + 225 mL deionized water

Unit discipline: C 1 C_1 C 1 ​ and C 2 C_2 C 2 ​ must share one unit, and V 1 V_1 V 1 ​ and V 2 V_2 V 2 ​ must share another. Mixing percent with molar, or millilitres with litres, is the single most common calculation error on the examination.