Study guide

10.2 Bone Marrow & Hematopoietic Preparations: Romanowsky, Giemsa & Wright Stains

ASCP Histotechnician HT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Fixation Principles & Aldehyde Fixatives

1.1 Principles and Chemistry of Fixation 1.2 Formalin Formulations and Aldehydes 1.3 Fixation Artifacts and Pigment Removal

2 Chapter 2: Compound Fixatives & Specimen Management

2.1 Metallic and Compound Fixatives 2.2 Non-Additive Fixatives & Special Fixation Applications 2.3 Specimen Accessioning, Grossing & Special Tissue Handling

3 Chapter 3: Tissue Processing Sequence & Reagents

3.1 Dehydration Principles and Reagents 3.2 Clearing Agents, Solvents & Safety Alternatives 3.3 Infiltration Media, Paraffin Properties & Additives

4 Chapter 4: Processors, Protocols & Decalcification

4.1 Automated Tissue Processors, Protocols & Maintenance 4.2 Decalcification Chemistry: Acid vs. Chelating Agents 4.3 Decalcification Endpoints, Artifacts & Surface Decal

5 Chapter 5: Embedding & Microtomy Techniques

5.1 Tissue Orientation & Paraffin Embedding Protocols 5.2 Rotary Microtome Mechanics, Knives & Clearance Angle 5.3 Sectioning Technique, Flotation Bath & Slide Adhesives

6 Chapter 6: Microtomy Artifacts & Cryotomy

6.1 Microtomy Artifacts, Defects & Troubleshooting 6.2 Cryostat Operation, Frozen Sections & Temperature Control 6.3 Cryosectioning Artifacts, Rapid Stains & Cryostat Safety

7 Chapter 7: Routine Hematoxylin & Eosin (H&E) Staining

7.1 Dye Chemistry, Mordants & Hematoxylin Formulations 7.2 Eosin Formulations, Differentiation & Bluing Agents 7.3 Automated Staining, Mounting, Coverslipping & H&E QC

8 Chapter 8: Special Stains — Carbohydrates & Connective Tissue

8.1 Glycogen, Neutral Mucins & Periodic Acid-Schiff (PAS) 8.2 Acid Mucins & Proteoglycans: Alcian Blue & Mucicarmine 8.3 Connective Tissue: Masson Trichrome & Collagen Stains 8.4 Basement Membranes, Movat Pentachrome & Multi-Element Connective Tissue Stains

9 Chapter 9: Special Stains — Fibers, Microorganisms, Pigments, Minerals & Lipids

9.1 Reticular & Elastic Fibers: Silver Impregnation & Verhoeff Stains 9.2 Microorganism Demonstration: Bacteria, Fungi & Spirochetes 9.3 Pigments, Minerals & Amyloid Demonstration 9.4 Lipid Histochemistry: Oil Red O, Sudan Dyes & Frozen-Section Requirements

10 Chapter 10: Special Stains — Nerve, Bone Marrow, Cytology & Tissue Components

10.1 Nerve Tissue & Myelin: Luxol Fast Blue, Bielschowsky & Silver Methods 10.2 Bone Marrow & Hematopoietic Preparations: Romanowsky, Giemsa & Wright Stains 10.3 Cytologic Preparations, Cell Blocks & the Papanicolaou Stain 10.4 Fibrin, Mast Cells & Other Tissue Components: PTAH, Toluidine Blue & Metachromasia

11 Chapter 11: Immunohistochemistry (IHC) & Molecular Staining

11.1 Principles of Antigen-Antibody Binding & Selection 11.2 Antigen Retrieval (HIER vs. PIER) & Endogenous Blocking 11.3 Detection Systems, Chromogens, Controls & Troubleshooting

12 Chapter 12: Laboratory Safety, Quality Control & Operations

12.1 OSHA Chemical Safety & Formaldehyde Exposure Monitoring 12.2 Biological Safety, Sharps Handling & Hazardous Waste Management 12.3 Quality Assurance, CLIA/CAP Compliance & Records Retention 12.4 Compound Light Microscopy, Optics & Kohler Illumination

13 Chapter 13: Laboratory Mathematics, Ancillary Equipment & Reagent Quality Control

13.1 Metric System, Percent Solutions & Dilutions 13.2 Molar Solutions, Normality & Buffer Preparation 13.3 Ancillary Laboratory Equipment, Water Quality & Solvent Recovery

10.2 Bone Marrow & Hematopoietic Preparations: Romanowsky, Giemsa & Wright Stains

Key Takeaways Explain This Topic AI

Romanowsky stains combine azure B, a basic thiazine dye, with eosin Y, an acid dye, in methanol; the azure B-eosin complex produces the purple Romanowsky effect in nuclei and azurophilic granules.

Romanowsky buffer pH is critical: below about 6.4 erythrocytes stain too red and nuclei pale, and above about 6.8 the whole smear shifts blue-grey.

Wright and Wright-Giemsa stains are dissolved in absolute methanol, which fixes the air-dried smear; water contamination of the methanol produces refractile erythrocyte water artifact.

Bone marrow trephine cores must be decalcified in EDTA rather than strong acid, because acid decalcification destroys iron, nucleic acid, and many antigens.

Storage iron and ring sideroblasts are assessed by Perls Prussian blue on an aspirate smear or clot section, never on an acid-decalcified core.

Last updated: September 2026

10.2 Bone Marrow & Hematopoietic Preparations: Romanowsky, Giemsa & Wright Stains

ASCP HT Exam Focus: Bone marrow is listed as its own procedure under Staining in the ASCP BOC content outline, and Giemsa and Romanowsky are named in the Summary of Stains. The highest-yield items connect a preparation type to the stain it supports and to the decalcification decision that precedes it.

A bone marrow examination is not one specimen but four simultaneous preparations , each answering a different question. Histology owns two of them outright and shares a third.

Preparation How it is made Fixation/handling Primary stain

Aspirate smear Marrow particles spread on glass Air-dried, then methanol-fixed by the stain Wright or Wright-Giemsa

Touch imprint (roll prep) Core rolled gently across a slide before fixation Air-dried Wright or Wright-Giemsa

Clot section Residual aspirate allowed to clot, processed as tissue 10 percent NBF or B-5, no decalcification H&E plus special stains

Trephine core biopsy 1.5 to 2 cm needle core of cancellous bone Fixed, then decalcified H&E plus special stains

Because the core requires decalcification and the smears do not, the two preparations answer different questions. Cellularity, architecture, fibrosis, and focal lesions come from the core; individual cell morphology, blast percentage, dysplasia, and stainable iron come from the smears.

Romanowsky Dye Chemistry

A Romanowsky stain is any polychrome mixture of a thiazine dye (methylene blue and its oxidation products, the azures) with an acid xanthene dye (eosin Y) , dissolved in methanol .

Azure B is the essential thiazine. It is a cationic basic dye that binds anionic DNA, RNA, and acidic granule proteoglycan.

Eosin Y is an anionic acid dye that binds cationic hemoglobin and eosinophil granule protein.

The Romanowsky effect is the distinctive purple-magenta of nuclear chromatin and azurophilic granules. It is produced by an azure B-eosin Y complex formed on the tissue, not by either dye alone. A stain lacking azure B gives blue nuclei and no purple.

Named members of the family

Wright stain: azure B plus eosin Y in methanol; single working solution plus buffer.

Wright-Giemsa: adds Giemsa's fuller azure mixture for richer granule detail; the standard for marrow aspirates.

May-Grunwald-Giemsa (Jenner-Giemsa, Pappenheim): sequential eosinate then Giemsa; favored in European practice.

Leishman: a Wright variant used widely for peripheral blood.

Diff-Quik and other rapid Romanowsky kits: three-step fixative/eosinophilic/basophilic dips used for rapid on-site evaluation of fine-needle aspirates.

Buffer pH: the single most tested variable

Romanowsky staining is buffered at approximately pH 6.4 to 6.8 .

Deviation Appearance Common cause

Too acidic (below 6.4) Erythrocytes bright red-orange, nuclei pale blue, no purple Acidic buffer or tap water, prolonged eosin exposure

Correct (6.4 to 6.8) Erythrocytes pink-tan, nuclei purple, granules crisp Correctly buffered water

Too alkaline (above 6.8) Everything blue-grey, erythrocytes blue-green Alkaline buffer, alkaline glassware detergent residue

Methanol and water artifact

Wright and Giemsa stock solutions are made in absolute, water-free methanol , and the methanol in the stain is what fixes the air-dried smear . Methanol that has absorbed atmospheric water, or a slide that was not fully air-dried, produces the classic water artifact : erythrocytes with refractile, punched-out pale centers and a crenated rim. Store methanol tightly capped and replace it on a schedule.

Decalcification Decisions That Control the Stains

The trephine core is bone, so it must be decalcified - but the choice of agent determines which downstream stains still work.

EDTA (10 to 14 percent, pH 7.0 to 7.4) is the marrow standard. It chelates calcium without acid hydrolysis, preserving iron, nucleic acids for FISH and sequencing, and immunohistochemical epitopes .

Strong mineral acids (nitric, hydrochloric) are fast but hydrolyze DNA, strip iron, and destroy many antigens . A core decalcified in strong acid cannot be used to assess stainable iron, and the Perls stain will read falsely negative.

Formic acid and formic-acid-based commercial reagents are an intermediate compromise; several proprietary agents are validated for IHC but should be confirmed against the laboratory's own antibody panel.

Consequence for practice: stainable storage iron and ring sideroblasts are evaluated on the aspirate smear or the clot section , which are never decalcified.

The Bone Marrow Special-Stain Panel

Stain Target Diagnostic use

Perls Prussian blue Ferric iron in macrophages and erythroblasts Storage iron, ring sideroblasts of myelodysplastic syndrome

  • Reticulin (silver) Reticular fiber network Myelofibrosis grading (MF-0 through MF-3)
  • Masson trichrome Mature collagen Distinguishes collagen fibrosis from reticulin increase
  • PAS Glycogen and neutral mucosubstance Megakaryocytes, abnormal erythroid precursors

Naphthol AS-D chloroacetate esterase (Leder) Granulocyte and mast cell esterase Granulocytic sarcoma, systemic mastocytosis

Congo red Amyloid Marrow involvement by amyloidosis

Giemsa on paraffin sections Nuclear and granule detail, organisms Mast cells, plasma cells, Leishmania , Histoplasma

Core sections for marrow are cut thin, at approximately 3 micrometers , because overlapping hematopoietic nuclei at 4 to 5 micrometers make differential counting unreliable.