Study guide
9.2 Acid-Fast Bacilli: Ziehl-Neelsen, Kinyoun, Fite & Auramine
ASCP Scientist in Histotechnology HTL
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Fixation Principles & Aldehydes
1.1 Fixation Principles, Tissue Autolysis & Reaction Kinetics 1.2 Aldehyde Fixatives & Formalin Chemistry 1.3 Fixation Artifacts, Under-Fixation & ASCO/CAP Guidelines
2 Chapter 2: Specialty Fixatives & Decalcification
2.1 Mercuric Chloride Fixatives: Zenker, Helly & B-5 2.2 Zinc Formalin & Picric Acid Fixatives 2.3 Coagulant Fixation & Monohydric Alcohol Fixatives 2.4 Carnoy Fluid, Acetone & Unfixed Transport Media 2.5 Decalcification Chemistry: Acids, Chelators & Kinetics 2.6 Decalcification Endpoints, Neutralization & Surface Decalcification
3 Chapter 3: Processing & Embedding Media
3.1 Dehydration & Clearing Solvents 3.2 Infiltration Media, Paraffin Properties & Plastics 3.3 Automated Processors & Protocol Optimization
4 Chapter 4: Microtomy & Sectioning Techniques
4.1 Embedding Centers & Diagnostic Tissue Orientation 4.2 Margin Inking, Mordanting & Embedding Quality Control 4.3 Rotary Microtome Engineering & Blade Geometry 4.4 Section Thickness, Flotation Bath & Slide Adhesives 4.5 Microtomy Artifacts & Troubleshooting
5 Chapter 5: Cryotomy & Specialized Sectioning
5.1 Cryostat Operation & Intraoperative Frozen Sections 5.2 Cell Blocks, Cytocentrifugation & Fluid Preparation 5.3 Hard Tissue & Plastic-Embedded Microtomy 5.4 Electron Microscopy Ultramicrotomy & Grid Contrasting 5.5 Papanicolaou & Cytologic Staining
6 Chapter 6: Routine Staining & Mounting
6.1 Dye Chemistry, Chromophores & Staining Mechanisms 6.2 Progressive & Regressive Hematoxylin Formulations 6.3 Eosin Counterstaining, Clearing & Coverslipping 6.4 Staining Instrumentation, Control Tissue & Special Stain QC
7 Chapter 7: Connective Tissue Stains
7.1 Collagen & Muscle Differentiation: Masson Trichrome & Movat 7.2 Elastic Fiber Demonstrations: Verhoeff-van Gieson & Aldehyde Fuchsin 7.3 Reticular Fibers, Fibrin & Muscle PTAH
8 Chapter 8: Carbohydrate, Lipid & Amyloid Stains
8.1 Glycogen & Epithelial Mucins: PAS & Diastase Digestion 8.2 Acid Mucosubstances: Alcian Blue & Colloidal Iron 8.3 Amyloid Detection: Congo Red & Polarized Light 8.4 Lipid Histochemistry: Lysochromes & Osmium Tetroxide
9 Chapter 9: Microorganism Demonstration
9.1 Bacteria & Spirochetes: Gram, Warthin-Starry & Giemsa 9.2 Acid-Fast Bacilli: Ziehl-Neelsen, Kinyoun, Fite & Auramine 9.3 Fungal Demonstration: GMS, PAS & Mucicarmine
10 Chapter 10: Pigments, Minerals & Neuropathology
10.1 Hemosiderin & Melanin: Perls, Fontana-Masson & Bleaching 10.2 Bile, Lipofuscin & Exogenous Pigments 10.3 Minerals & Metals: Calcium, Copper & Urate Crystals 10.4 Neurohistology, Argyrophilic Silver & Myelin Stains 10.5 Skeletal Muscle Enzyme Histochemistry & Fiber Typing
11 Chapter 11: Immunohistochemistry Principles & Methodology
11.1 Antibodies, Epitopes & Antigen Retrieval (HIER and PIER) 11.2 Detection Systems, Polymer Technology & Chromogens 11.3 IHC Controls, Artifacts & Quality Troubleshooting
12 Chapter 12: Advanced Molecular & Immunofluorescence
12.1 Diagnostic Direct Immunofluorescence: Renal & Skin Biopsies 12.2 In Situ Hybridization: FISH, CISH & RNAscope 12.3 Molecular Pre-Analytics: Cold Ischemia & Fixation Windows 12.4 FFPE Extraction, Molecular Decalcification & Tumor Enrichment 12.5 Scrolls, RNase-Free Technique & Laser Capture Microdissection
13 Chapter 13: Laboratory Mathematics & Reagent Chemistry
13.1 Percent Solutions, Hydration Calculations & Dilutions 13.2 Molarity, Normality & Equivalent Weights 13.3 Buffer Systems, pH Adjustment & Standardization 13.4 Ancillary Laboratory Equipment, Water Quality & Solvent Recovery
14 Chapter 14: Laboratory Safety & Regulatory Standards
14.1 OSHA Formaldehyde Standard, Engineering Controls & PPE 14.2 Hazard Labeling, Flammable Storage, Waste & Spill Response 14.3 Biological Hazards, Infection Control & Ergonomics 14.4 CLIA '88 Regulations & CAP Accreditation Requirements
15 Chapter 15: Microscopy, Tissue Identification & Bone Marrow Preparation
15.1 Light Microscopy, Optics & Specialized Illumination 15.2 Normal Histology & Diagnostic Tissue Identification 15.3 Bone Marrow & Hematopoietic Specimen Preparation
16 Chapter 16: Laboratory Management, Education & Exam Strategy
16.1 Laboratory Operations, Leadership & Quality Improvement 16.2 Educational Methodology & Competency Assessment 16.3 ASCP BOC HTL Exam Mechanics, Scoring & Comprehensive Review
9.2 Acid-Fast Bacilli: Ziehl-Neelsen, Kinyoun, Fite & Auramine
Key Takeaways Explain This Topic AI
Acid-fastness is governed by high-molecular-weight branched beta-hydroxy fatty acids (mycolic acids, 60–90 carbons) covalently linked to arabinogalactan-peptidoglycan complexes, forming a dense hydrophobic lipid barrier that repels aqueous basic dyes.
Lipophilic carbol-fuchsin penetrates the waxy mycobacterial envelope via thermal assistance (steaming in Ziehl-Neelsen) or elevated concentrations of phenol and dye augmented by non-ionic surfactants such as Tergitol (cold Kinyoun method), resisting extraction by strong mineral acid-alcohol (3% HCl in 95% ethanol).
Mycobacterium leprae and Nocardia species possess lower lipid content and shorter mycolic acid chains easily stripped by routine xylene deparaffinization and strong mineral acid-alcohol, requiring the Fite (Fite-Faraco) protocol.
The Fite method protects delicate bacterial lipids during deparaffinization using a 1:2 peanut oil-xylene mixture and employs a gentle 0.5%–1.0% aqueous sulfuric acid decolorizer to prevent false-negative results.
Auramine O - Rhodamine B fluorochrome staining binds directly to mycolic acids, emitting brilliant golden-yellow/green fluorescence against a potassium permanganate-quenched dark background, allowing rapid biopsy screening at low magnifications (20x–40x) with vastly superior sensitivity.
Last updated: September 2026
9.2 Acid-Fast Bacilli: Ziehl-Neelsen, Kinyoun, Fite & Auramine
Quick Summary: In diagnostic histotechnology, demonstrating the genus Mycobacterium ( M. tuberculosis , M. avium-intracellulare , M. leprae ) and related partially acid-fast actinomycetes ( Nocardia ) requires specialized histochemical methods based on the property of acid-fastness . Mycobacteria possess a unique cell envelope containing an extraordinary quantity of high-molecular-weight lipid, dominated by mycolic acids . This dense, hydrophobic, wax-like coat resists conventional water-soluble biological stains, including the Gram stain. However, when lipophilic phenolic dye mixtures ( carbol-fuchsin ) penetrate the cell wall—either through thermal energy ( Ziehl-Neelsen ) or high chemical dye-phenol concentrations augmented by wetting agents ( Kinyoun with Tergitol )—the dye forms a stable complex that resists extraction by strong mineral acid-alcohol (3% HCl in 95% ethanol). Delicate organisms with lower mycolic acid content ( M. leprae , Nocardia ) require lipid-preserving modifications ( Fite-Faraco ) utilizing peanut oil-xylene and mild aqueous sulfuric acid. For high-volume screening, Auramine O - Rhodamine B fluorochrome microscopy provides unmatched sensitivity by enabling rapid examination at low magnification under ultraviolet light.
1. Mycobacterial Cell Wall Biochemistry and the Acid-Fast Phenomenon
Mycobacteria feature an exceptionally complex, lipid-dominated cell envelope that constitutes up to 60% of the dry cell wall weight . This biochemical architecture is fundamentally distinct from both Gram-positive and Gram-negative bacteria. MYCOBACTERIAL CELL ENVELOPE ARCHITECTURE:
- Outer Surface: Glycolipid Capsule (Trehalose 6,6'-Dimycolate / Cord Factor, Sulfolipids)
- │
- ▼
- MYCOLIC ACID LAYER (60 to 90 Carbons, High Density Hydrophobic Wax)
- │ - Long-chain alpha-alkyl beta-hydroxy fatty acids
- │ - Covalently esterified to terminal arabinofuranosyl units
- ▼
- ARABINOGALACTAN MATRIX (Branched D-Arabinose and D-Galactose Polysaccharide)
- │ - Linked via phosphodiester bridge to underlying peptidoglycan
- ▼
- PEPTIDOGLYCAN (MUREIN) CORE (Repeating NAG-NAM polymers with DAP cross-links)
- │
- ▼
- BACTERIAL PLASMA MEMBRANE (Phospholipid bilayer with Lipoarabinomannan / LAM)
- The Molecular Structure of Mycolic Acids
Mycolic acids are high-molecular-weight, α \alpha α -branched, β \beta β -hydroxy fatty acids with hydrocarbon chains ranging from 60 to 90 carbon atoms in Mycobacterium tuberculosis . The general chemical structure is: R 1 − CH ( OH ) − CH ( R 2 ) − COOH \text{R}_1-\text{CH}(\text{OH})-\text{CH}(\text{R}_2)-\text{COOH} R 1 − CH ( OH ) − CH ( R 2 ) − COOH
where R 1 \text{R}_1 R 1 represents a long meromycolic carbon chain (often containing cyclopropane rings, methoxy, or keto groups) and R 2 \text{R}_2 R 2 is a shorter saturated alkyl chain ( C 20 \text{C}_{20} C 20 to C 24 \text{C}_{24} C 24 ). These massive fatty acid chains are covalently esterified to the terminal hydroxyl groups of the arabinogalactan polysaccharide, which is anchored to the underlying peptidoglycan framework. Together, this structure forms the "mAGP complex" (mycolyl-arabinogalactan-peptidoglycan).
The Physicochemical Basis of Acid-Fastness
Hydrophobic Exclusion: In an untreated histological section, the densely packed, crystalline mycolic acid chains create a rigid, highly hydrophobic lipid barrier. Polar aqueous dye solutions cannot wet or traverse this waxy layer.
Lipophilic Phenolic Partitioning: Phenol (carbolic acid, C 6 H 5 O H C_6H_5OH C 6 H 5 O H ) is a lipophilic organic compound that readily dissolves in non-polar lipid matrices. In carbol-fuchsin formulations, basic fuchsin (a mixture of rosaniline, pararosaniline, magenta II, and new fuchsin) is dissolved in aqueous phenol. Phenol acts as an organic carrier solvent and penetrating agent, softening the waxy mycolic coat and partitioning basic fuchsin directly into the lipid phase of the cell wall.
Intramolecular Complexation: Inside the lipid envelope, basic fuchsin molecules establish strong hydrophobic interactions and hydrogen bonds between dye amino groups ( − N H 2 -NH_2 − N H 2 ) and the hydroxyl/carboxyl moieties of mycolic acids, forming a stable, water-insoluble dye-lipid coordination complex.
Resistance to Acid Decolorization (Acid-Fastness): When the stained section is exposed to a strong decolorizing agent—specifically 3% hydrochloric acid ( H C l HCl H Cl ) in 95% ethanol —host tissue proteins and non-acid-fast bacteria are rapidly stripped of basic fuchsin because they possess no protective lipid mantle. However, the mineral acid-alcohol cannot wet or permeate the dense, hydrophobic mycolic acid matrix. The carbol-fuchsin remains locked within the mycobacterial envelope, causing acid-fast bacilli (AFB) to retain an intense, brilliant magenta-red coloration.
2. Carbol-Fuchsin Staining Protocols: Ziehl-Neelsen vs. Kinyoun
Diagnostic laboratories utilize two primary carbol-fuchsin protocols for demonstrating M. tuberculosis and M. avium-intracellulare in tissue sections: the Ziehl-Neelsen (hot method) and the Kinyoun (cold method) .
Feature / Parameter Ziehl-Neelsen Protocol (Hot Method) Kinyoun Protocol (Cold Method)
Basic Fuchsin Concentration Low: 0.3% to 0.5% (aqueous-alcoholic) High: 4.0% (nearly 10-fold higher concentration)
- Phenol Concentration 5.0% aqueous carbolic acid 8.0% aqueous carbolic acid
- Ethanol Solvent Base 10% ethanol in distilled water 20% ethanol in distilled water
Surfactant / Penetration Enhancer None (relies on thermal energy) Tergitol (Tergitol 7 or 4 non-ionic surfactant)
Penetration Mechanism Thermal energy: steaming at 60°C–70°C for 10–15 min Chemical mass action & wetting: room temp for 30–60 min
Decolorizing Reagent 3% Hydrochloric acid in 95% ethanol 3% Hydrochloric acid in 95% ethanol
Counterstain Options Working Methylene Blue (0.1%–0.5%) or Light Green SF (0.2%) Working Methylene Blue (0.1%–0.5%) or Light Green SF (0.2%)
Acid-Fast Organism Appearance Slender, beaded bright red / magenta rods Slender, beaded bright red / magenta rods
Non-Acid-Fast Tissue Result Blue (with methylene blue) or Green (with light green) Blue (with methylene blue) or Green (with light green)
Safety & Technical Considerations Heated phenol releases volatile, toxic, irritating vapors Eliminates open heating of volatile phenol; safer for bench workers
The Thermodynamics of Thermal Penetration (Ziehl-Neelsen)
In the classic Ziehl-Neelsen procedure, slides flooded with carbol-fuchsin are heated with an open flame or microwave oven until steam gently rises ( 60 ° C to 70 ° C 60°C\text{ to }70°C 60° C to 70° C ). Heat provides thermal kinetic energy that temporarily melts and fluidizes the rigid hydrocarbon chains of mycolic acid, expanding intermolecular spaces and facilitating rapid dye diffusion.
Caution
Boiling and Drying Hazards: The staining solution must never boil , as violent bubbling detaches tissue sections from the glass slide. Furthermore, carbol-fuchsin must never dry out on the slide; if evaporation occurs, insoluble phenolic-dye crystals precipitate irreversibly onto the tissue, creating false-positive crystalline artifacts that mimic fragmented acid-fast rods.
The Chemical Driving Force of Kinyoun and Tergitol Surfactants
Developed by Joseph Kinyoun in 1915, the "cold" method overcomes the occupational hazards of heated phenol vapors. Kinyoun achieved room-temperature penetration by dramatically increasing the thermodynamic chemical potential: basic fuchsin concentration was increased from 0.3% to 4% , and phenol concentration was raised from 5% to 8% .
In modern modifications (such as the Ellis method or surfactant-enhanced Kinyoun), Tergitol (a non-ionic alkyl polyglycol ether surfactant, e.g., Tergitol 7 or Tergitol 4) is added to the carbol-fuchsin formulation. Tergitol acts as a powerful wetting agent that drastically reduces interfacial surface tension between the aqueous dye solution and the waxy mycolic acid coat. This allows rapid dye penetration into the bacterial envelope within 15 to 30 minutes at room temperature, completely dispensing with the need for heat.
Counterstaining: Methylene Blue vs. Light Green SF
Methylene Blue: The traditional counterstain. Yields high-contrast dark blue background against magenta bacilli. However, over-counterstaining is a major diagnostic risk : if methylene blue is applied too intensely, dark blue cytoplasmic staining masks tiny, beaded acid-fast bacilli, leading to false-negative evaluations.
Light Green SF Yellowish: Provides a soft, pale green background. Light green is strongly favored by cytotechnologists and histotechnologists performing prolonged oil-immersion screening (100x), as it markedly reduces ocular fatigue and enhances contrast for faint magenta organisms.
3. The Fite (Fite-Faraco) Modified Acid-Fast Protocol
While Ziehl-Neelsen and Kinyoun methods reliably stain Mycobacterium tuberculosis , they frequently produce complete false-negative results when applied to tissue containing Mycobacterium leprae (the causative agent of Hansen's disease/leprosy) or Nocardia species ( N. asteroides , N. brasiliensis ). THE FITE-FARACO LIPID-PRESERVING SEQUENCE:
- [FFPE Tissue Section on Slide]
- │
- ▼
- [Deparaffinize in 1:2 Peanut Oil / Xylene Mixture (2 changes, 10–15 min)]
- Peanut oil coats and shields delicate mycolic acid envelope
- Prevents pure xylene from extracting fragile bacterial lipids
- │
- ▼
- [Drain & Blot Section to Oily Surface — NO Absolute Alcohol Rinse]
- │
- ▼
- [Carbol-Fuchsin Staining: 20 to 30 min at Room Temperature]
- │
- ▼
- [Mild Aqueous Decolorization: 0.5% to 1.0% Sulfuric Acid (H2SO4) in Water]
- Gently extracts dye from host tissue
- Sparing: Does NOT breach delicate bacterial envelope
- │
- ▼
- [Methylene Blue Counterstain ──> Water Rinse ──> Blot ──> Air Dry ──> Xylene ──> Mount]
- The Vulnerability of Mycobacterium leprae and Nocardia
Lower Molecular Weight Lipids: The mycolic acids of M. leprae are significantly shorter in carbon chain length (approximately C 70 \text{C}_{70} C 70 ) and possess fewer cyclopropane rings than those of M. tuberculosis ( C 80 \text{C}_{80} C 80 to C 90 \text{C}_{90} C 90 ). Furthermore, total envelope lipid content is drastically reduced.
Nocardia Species: Partially (modified) acid-fast aerobic actinomycetes possessing short-chain nocardiomycolic acids ( C 40 \text{C}_{40} C 40 to C 60 \text{C}_{60} C 60 ).
The Routine Processing Defect: When sections are deparaffinized in 100% xylene, the strong organic solvent penetrates the delicate M. leprae or Nocardia cell wall, dissolving and extracting the low-density mycolic acids. Subsequent exposure to harsh 3% hydrochloric acid-alcohol completely strips the carbol-fuchsin, rendering the organisms invisible.
The Fite-Faraco Methodological Solution
Protective Oil Deparaffinization: The deparaffinization bath contains a 1:2 mixture of peanut oil (or light mineral oil) and xylene . As xylene dissolves the paraffin wax, the non-volatile peanut oil saturates the tissue, creating a hydrophobic protective coating over the bacterial cell walls that prevents solvent extraction of delicate mycolic acids.
Controlled Blotting (No Alcohol Washes): Slides are blotted to leave a fine oily film on the tissue; they are never rinsed in absolute ethanol , which would strip the protective oil barrier.
Mild Aqueous Acid Decolorization: Instead of 3% HCl in 95% ethanol, Fite utilizes 0.5% to 1.0% aqueous sulfuric acid ( H 2 S O 4 H_2SO_4 H 2 S O 4 ) . Aqueous sulfuric acid provides gentle hydronium ion extraction that decolorizes host tissue proteins without penetrating or bleaching the oil-protected bacterial cell wall.
Air-Drying Protocol: After counterstaining in dilute methylene blue, slides are blotted, thoroughly air-dried, and cleared briefly in xylene before synthetic mounting—strictly avoiding alcohol dehydration baths.
Diagnostic Targets: Mycobacterium leprae , Nocardia species, Rhodococcus , and Legionella micdadei (the Pittsburgh pneumonia agent).
4. Auramine O - Rhodamine B Fluorochrome Staining
Fluorochrome staining represents the most sensitive optical method for demonstrating acid-fast bacilli in diagnostic pathology and microbiology.
Biophysical and Optical Principles
The Fluorochromes: Auramine O (a diarylmethane basic dye) and Rhodamine B (a basic xanthene fluorochrome) are lipophilic dyes that penetrate and bind with exceptional affinity to mycolic acids.
Excitation and Emission Physics: When illuminated by high-intensity blue-violet or ultraviolet radiation ( λ excitation ≈ 400 to 440 nm \lambda_{\text{excitation}} \approx 400\text{ to }440\text{ nm} λ excitation ≈ 400 to 440 nm ), the bound dye molecules absorb photonic energy, exciting π \pi π electrons to higher energy orbitals. Upon returning to ground state, they emit light at longer, visible wavelengths ( λ emission ≈ 520 to 590 nm \lambda_{\text{emission}} \approx 520\text{ to }590\text{ nm} λ emission ≈ 520 to 590 nm ). Acid-fast bacilli emit a brilliant, luminous golden-yellow to reddish-orange fluorescence .
Background Quenching: Slides are decolorized with 0.5% HCl in 70% ethanol, then counterstained with 0.5% potassium permanganate ( K M n O 4 KMnO_4 K M n O 4 ) or eriochrome black T. Potassium permanganate chemically oxidizes and quenches the natural autofluorescence of collagen, elastin, and background leukocytes, creating an intensely dark, pitch-black optical field.
Clinical and Laboratory Advantages Field of View Area ∝ 1 Magnification 2 \text{Field of View Area} \propto \frac{1}{\text{Magnification}^2} Field of View Area ∝ Magnification 2 1
Screening at Low Magnification: Under standard brightfield Ziehl-Neelsen staining, a histotechnologist or pathologist must examine tissue under a 100x oil-immersion objective (1000x total magnification), providing a microscopic field of view diameter of only ≈ 0.18 mm \approx 0.18\text{ mm} ≈ 0.18 mm . Screening an entire 15 × 15 mm 15 \times 15\text{ mm} 15 × 15 mm biopsy section requires hundreds of microscopic fields and 15 to 30 minutes of labor.
Vastly Increased Sensitivity: Under fluorescence, bright golden bacilli stand out brilliantly against the jet-black background like stars in a night sky. Consequently, the microscopist can screen sections using a 20x or 40x objective (200x or 400x total magnification). This expands the visible field area by 6 to 25 times , permitting thorough review of the entire slide in 2 to 3 minutes and dramatically increasing the detection rate in paucibacillary (low organism burden) infections.
Warning
Photobleaching and Quenching Artifacts: Fluorochromes undergo rapid photobleaching (loss of fluorescence) upon prolonged exposure to excitation light. Auramine-stained slides must be examined immediately or stored in light-tight boxes at 4°C. Furthermore, if potassium permanganate counterstaining exceeds 2 minutes, it will chemically oxidize and quench the fluorochrome within the bacilli, extinguishing the fluorescent signal.
5. Comparative Matrix of Acid-Fast Methods & Quality Assurance
Technical Parameter Ziehl-Neelsen (ZN) Kinyoun (Cold) Fite (Fite-Faraco) Auramine-Rhodamine
Primary Stain 0.3% Carbol-fuchsin 4% Carbol-fuchsin (with Tergitol) Carbol-fuchsin (after peanut oil/xylene) Auramine O - Rhodamine B
Application Mode Steaming (60°–70°C, 10–15 min) Room temp (30–60 min) Room temp (20–30 min) Room temp (15–30 min) or 60°C
Decolorizing Agent 3% HCl in 95% ethanol 3% HCl in 95% ethanol 0.5% to 1.0% aqueous H 2 S O 4 H_2SO_4 H 2 S O 4 0.5% HCl in 70% ethanol
Counterstain / Quencher Methylene blue or Light green Methylene blue or Light green Methylene blue (working) 0.5% Potassium permanganate
Microscopy Mode Brightfield (100x oil immersion) Brightfield (100x oil immersion) Brightfield (100x oil immersion) Fluorescence (20x–40x dry)
Organism Result Bright magenta / red rods Bright magenta / red rods Bright magenta / red rods Glowing yellow-orange / green
Background Result Pale blue or pale green Pale blue or pale green Pale blue (faint) Jet black (quenched)
Primary Target M. tuberculosis , M. avium M. tuberculosis , M. avium M. leprae , Nocardia species All mycobacteria (rapid screening)
Mandatory Quality Control Regulations
Positive Control Slide Requirement: Every staining run of patient slides must include a known positive control slide processed through identical reagents. For routine AFB (ZN, Kinyoun, Auramine), tissue containing M. tuberculosis or M. avium (typically lung or lymph node) is required.
The Fite Control Mandate: A Mycobacterium tuberculosis control cannot validate a Fite stain . Because M. tuberculosis possesses a robust, high-lipid envelope, it will stain successfully even if deparaffinization was performed improperly with pure xylene and decolorized with harsh 3% HCl. Therefore, the control tissue for a Fite stain must contain Mycobacterium leprae or Nocardia to verify that delicate lipids were preserved.