Study guide
15.3 Bone Marrow & Hematopoietic Specimen Preparation
ASCP Scientist in Histotechnology HTL
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Fixation Principles & Aldehydes
1.1 Fixation Principles, Tissue Autolysis & Reaction Kinetics 1.2 Aldehyde Fixatives & Formalin Chemistry 1.3 Fixation Artifacts, Under-Fixation & ASCO/CAP Guidelines
2 Chapter 2: Specialty Fixatives & Decalcification
2.1 Mercuric Chloride Fixatives: Zenker, Helly & B-5 2.2 Zinc Formalin & Picric Acid Fixatives 2.3 Coagulant Fixation & Monohydric Alcohol Fixatives 2.4 Carnoy Fluid, Acetone & Unfixed Transport Media 2.5 Decalcification Chemistry: Acids, Chelators & Kinetics 2.6 Decalcification Endpoints, Neutralization & Surface Decalcification
3 Chapter 3: Processing & Embedding Media
3.1 Dehydration & Clearing Solvents 3.2 Infiltration Media, Paraffin Properties & Plastics 3.3 Automated Processors & Protocol Optimization
4 Chapter 4: Microtomy & Sectioning Techniques
4.1 Embedding Centers & Diagnostic Tissue Orientation 4.2 Margin Inking, Mordanting & Embedding Quality Control 4.3 Rotary Microtome Engineering & Blade Geometry 4.4 Section Thickness, Flotation Bath & Slide Adhesives 4.5 Microtomy Artifacts & Troubleshooting
5 Chapter 5: Cryotomy & Specialized Sectioning
5.1 Cryostat Operation & Intraoperative Frozen Sections 5.2 Cell Blocks, Cytocentrifugation & Fluid Preparation 5.3 Hard Tissue & Plastic-Embedded Microtomy 5.4 Electron Microscopy Ultramicrotomy & Grid Contrasting 5.5 Papanicolaou & Cytologic Staining
6 Chapter 6: Routine Staining & Mounting
6.1 Dye Chemistry, Chromophores & Staining Mechanisms 6.2 Progressive & Regressive Hematoxylin Formulations 6.3 Eosin Counterstaining, Clearing & Coverslipping 6.4 Staining Instrumentation, Control Tissue & Special Stain QC
7 Chapter 7: Connective Tissue Stains
7.1 Collagen & Muscle Differentiation: Masson Trichrome & Movat 7.2 Elastic Fiber Demonstrations: Verhoeff-van Gieson & Aldehyde Fuchsin 7.3 Reticular Fibers, Fibrin & Muscle PTAH
8 Chapter 8: Carbohydrate, Lipid & Amyloid Stains
8.1 Glycogen & Epithelial Mucins: PAS & Diastase Digestion 8.2 Acid Mucosubstances: Alcian Blue & Colloidal Iron 8.3 Amyloid Detection: Congo Red & Polarized Light 8.4 Lipid Histochemistry: Lysochromes & Osmium Tetroxide
9 Chapter 9: Microorganism Demonstration
9.1 Bacteria & Spirochetes: Gram, Warthin-Starry & Giemsa 9.2 Acid-Fast Bacilli: Ziehl-Neelsen, Kinyoun, Fite & Auramine 9.3 Fungal Demonstration: GMS, PAS & Mucicarmine
10 Chapter 10: Pigments, Minerals & Neuropathology
10.1 Hemosiderin & Melanin: Perls, Fontana-Masson & Bleaching 10.2 Bile, Lipofuscin & Exogenous Pigments 10.3 Minerals & Metals: Calcium, Copper & Urate Crystals 10.4 Neurohistology, Argyrophilic Silver & Myelin Stains 10.5 Skeletal Muscle Enzyme Histochemistry & Fiber Typing
11 Chapter 11: Immunohistochemistry Principles & Methodology
11.1 Antibodies, Epitopes & Antigen Retrieval (HIER and PIER) 11.2 Detection Systems, Polymer Technology & Chromogens 11.3 IHC Controls, Artifacts & Quality Troubleshooting
12 Chapter 12: Advanced Molecular & Immunofluorescence
12.1 Diagnostic Direct Immunofluorescence: Renal & Skin Biopsies 12.2 In Situ Hybridization: FISH, CISH & RNAscope 12.3 Molecular Pre-Analytics: Cold Ischemia & Fixation Windows 12.4 FFPE Extraction, Molecular Decalcification & Tumor Enrichment 12.5 Scrolls, RNase-Free Technique & Laser Capture Microdissection
13 Chapter 13: Laboratory Mathematics & Reagent Chemistry
13.1 Percent Solutions, Hydration Calculations & Dilutions 13.2 Molarity, Normality & Equivalent Weights 13.3 Buffer Systems, pH Adjustment & Standardization 13.4 Ancillary Laboratory Equipment, Water Quality & Solvent Recovery
14 Chapter 14: Laboratory Safety & Regulatory Standards
14.1 OSHA Formaldehyde Standard, Engineering Controls & PPE 14.2 Hazard Labeling, Flammable Storage, Waste & Spill Response 14.3 Biological Hazards, Infection Control & Ergonomics 14.4 CLIA '88 Regulations & CAP Accreditation Requirements
15 Chapter 15: Microscopy, Tissue Identification & Bone Marrow Preparation
15.1 Light Microscopy, Optics & Specialized Illumination 15.2 Normal Histology & Diagnostic Tissue Identification 15.3 Bone Marrow & Hematopoietic Specimen Preparation
16 Chapter 16: Laboratory Management, Education & Exam Strategy
16.1 Laboratory Operations, Leadership & Quality Improvement 16.2 Educational Methodology & Competency Assessment 16.3 ASCP BOC HTL Exam Mechanics, Scoring & Comprehensive Review
15.3 Bone Marrow & Hematopoietic Specimen Preparation
Key Takeaways Explain This Topic AI
A complete bone marrow examination comprises aspirate smears, touch imprints of the core, a clot section, and a decalcified trephine core biopsy, each answering a different question.
Storage iron is assessed by Perls Prussian blue on aspirate smears or the clot section, because acid decalcification of the trephine core leaches iron and produces a false-negative result.
B-5 was the historic marrow fixative but contains mercuric chloride, so zinc formalin and 10 percent neutral buffered formalin have replaced it where immunohistochemistry and molecular testing are needed.
EDTA at neutral pH is the preferred marrow decalcifier because it preserves immunohistochemical epitopes, fluorescence in situ hybridization signal, and nucleic acid integrity.
Marrow fibrosis is graded on a reticulin stain from MF-0 to MF-3, with collagen confirmed by trichrome at the highest grade.
Last updated: September 2026
1. The Four Marrow Preparations
The ASCP BOC content outline lists bone marrow explicitly among Staining procedures, and marrow work touches Fixation, Processing, and Embedding and Microtomy as well. A complete examination usually yields four different preparations, and the histotechnologist handles all of them.
Preparation What It Answers Handling
Aspirate smears Cytologic detail, differential count, storage iron, ring sideroblasts Air-dried, Wright-Giemsa or Romanowsky; a separate slide for Perls
Touch (imprint) preparations Cytology when the aspirate is dry or diluted Core rolled or touched gently onto a slide before fixation, air-dried, Romanowsky
Clot section Architecture and cellularity from aspirated particles; iron without decalcification Plasma-thrombin or agar cell block, formalin-fixed, paraffin, no decalcification needed
Trephine core biopsy Cellularity, architecture, fibrosis, focal lesions, staging Fixed, decalcified, paraffin, sectioned thin with step levels
Important
Touch preparations are made before the core is placed into fixative. Once the core has been in formalin, imprints are useless. If the technologist receives an unfixed core, this is the moment to make the imprints.
2. Fixation Choices and Their Consequences
Fixative Advantage Cost
B-5 (mercuric chloride, sodium acetate, formaldehyde added just before use) Historic gold standard for lymphoid and marrow nuclear detail Mercury pigment requires dezenkerization; mercury waste disposal; acidic and hostile to molecular testing
Zinc formalin Nuclear crispness approaching B-5, no mercury, better antigen retention Slightly less crisp than B-5
Acid zinc formalin Combines fixation with mild decalcification of small trabeculae Acidity can compromise sensitive epitopes and nucleic acid
10 percent neutral buffered formalin Universal compatibility with immunohistochemistry, in situ hybridization, and sequencing Less nuclear crispness than zinc or mercuric formulations
Because marrow biopsies increasingly drive flow-adjunct immunohistochemistry, fluorescence in situ hybridization, and next-generation sequencing panels , most laboratories have moved to zinc formalin or neutral buffered formalin. Acidic mercuric fixation followed by acid decalcification is the worst possible combination for downstream molecular work.
3. Decalcification of the Trephine Core
The core contains bony trabeculae that must be demineralized before sectioning, but marrow is small and easy to over-decalcify.
Agent Time Scale Suitability
Neutral-buffered EDTA, 0.5 M, pH 7.0 to 7.4 Hours to a day for a small core Preferred ; preserves epitopes, FISH signal, and nucleic acid
- Buffered formic acid 1 to 4 hours Acceptable for morphology and many antibodies; monitor closely
- Formic acid-sodium citrate 1 to 4 hours Common commercial marrow decalcifier
- Strong mineral acids (HCl, nitric) Under an hour Avoid : destroys nuclear basophilia, iron, epitopes, and DNA
Over-decalcification produces pale, washed-out nuclei that will not take hematoxylin, loss of Perls reactivity, and failed fluorescence in situ hybridization. The endpoint is monitored, not assumed, and the core is rinsed thoroughly before processing.
4. Processing, Embedding and Microtomy
Orient the core along its long axis so the full length of marrow between trabeculae is presented; a core embedded on end wastes most of the specimen.
Embed flat and press gently to the mold floor so the entire length lies in one plane.
Section at 3 to 4 micrometers. Marrow is a cell-dense tissue, and thick sections make overlapping nuclei uninterpretable.
Cut step levels and save unstained slides at the time of initial sectioning, because refacing later sacrifices tissue and a marrow core cannot be replaced.
Handle with care. Crush artifact from forceps at the gross bench or embedding station destroys the cytology that the biopsy exists to show.
5. The Marrow Stain Battery
- Stain Target Technical Note
- Hematoxylin and eosin Cellularity, architecture, focal lesions Baseline for every core and clot
- Wright-Giemsa / Romanowsky Cytologic detail on smears and imprints Requires air-dried preparations
Giemsa on sections Mast cells, plasma cells, cytoplasmic granularity Complements hematoxylin and eosin on the core
Reticulin silver Type III collagen fiber network; fibrosis grading The single most important special stain on a core
- Masson trichrome Mature type I collagen Confirms the highest grade of fibrosis
- Perls Prussian blue Storage iron, ring sideroblasts Best on aspirate smears or the clot section
- Periodic acid-Schiff Megakaryocytes, glycogen, some parasites Highlights megakaryocyte cytoplasm
Chloroacetate esterase (Leder) Granulocytic differentiation, mast cells Enzyme method; sensitive to over-decalcification
Congo red Amyloid Requires 8 to 10 micrometer sections
Immunohistochemistry CD34 blasts, CD61 or CD42b megakaryocytes, CD117 and tryptase mast cells, CD138 plasma cells, kappa and lambda light chains Epitope survival depends on the fixation and decalcification history
5.1 Why iron is read on the aspirate
Acid decalcification leaches iron out of the trephine core , so a Perls stain on a decalcified core can be falsely negative even in a patient with iron overload. Storage iron is therefore graded on aspirate smears or on the clot section , neither of which is decalcified. Ring sideroblasts — erythroid precursors with a perinuclear ring of iron-laden mitochondria — can only be identified on aspirate smears, never on a section.
5.2 Reticulin fibrosis grading
Marrow fibrosis is graded on the reticulin stain using a widely adopted four-tier consensus scheme:
- Grade Reticulin Pattern
- MF-0 Scattered linear reticulin with no intersections, corresponding to normal marrow
- MF-1 Loose network of reticulin with many intersections, especially in perivascular areas
MF-2 Diffuse and dense increase in reticulin with extensive intersections, occasionally with focal bundles of collagen and/or focal osteosclerosis
MF-3 Diffuse and dense reticulin with extensive intersections and coarse bundles of collagen, usually with osteosclerosis
Because collagen bundles distinguish MF-2 from MF-3, a trichrome stain is run alongside reticulin when fibrosis is advanced. The grading is only as good as the silver technique, which is why reticulin control tissue and careful gold toning matter on marrow cases.
6. Common Technical Failures on Marrow
- Problem Cause Prevention
- Pale nuclei that will not take hematoxylin Over-decalcification Monitor the endpoint; prefer EDTA
Negative iron stain in a transfused patient Perls performed on the decalcified core Stain aspirate smears or the clot section
Failed FISH or sequencing Acidic fixative plus acid decalcification Zinc or neutral buffered formalin, EDTA decalcification
Crushed, smeared marrow cells at the core edge Forceps pressure during grossing or embedding Handle by the cassette, never squeeze the core
Only a short segment of marrow on the slide Core embedded on end or not pressed flat Orient along the long axis, press to the mold floor