Study guide
19.2 Quality Control, Root-Cause Analysis, and POCT
ASCP Microbiology Technologist M ASCP
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current M(ASCP) Exam Facts 1.2 CAT, Scoring, Retakes, and CMP 1.3 Eligibility Routes and Clinical Experience
2 Preanalytic: Collection and Transport
2.1 Patient Identification and Specimen Labeling 2.2 Specimen Collection, Sterile Technique, and Blood Cultures 2.3 Transport Devices, Atmosphere, Time, and Temperature
3 Preanalytic: Processing, Media, and Incubation
3.1 Prioritization, Rejection, and Specimen Preparation 3.2 Media Types, Components, and Selection 3.3 Inoculation, Incubation Conditions, and Slide Preparation
4 Preanalytic: Stains
4.1 Gram Stain: Procedure, Principle, and Interpretation 4.2 Acid-Fast and Modified Acid-Fast Stains 4.3 KOH, Calcofluor-White, Trichrome, Giemsa, and Acridine Orange
5 Bacteriology: Blood and Bone Marrow
5.1 Blood Culture Systems and Rapid Identification 5.2 Bloodstream Pathogens and Skin Flora Significance 5.3 Endocarditis, Bone Marrow Pathogens, and Pathogenicity
6 Bacteriology: CSF and Sterile Body Fluids
6.1 CSF Sources and Acute Meningitis Pathogens 6.2 Shunt Infections, CSF Correlates, Antigen and Molecular Methods 6.3 Sterile Body Fluids: Pathogens, Flora, and Molecular Methods
7 Bacteriology: Respiratory Tract
7.1 Lower Respiratory Specimens, CAP, and HAP Pathogens 7.2 Cystic Fibrosis Pathogens and Quantitative Reporting 7.3 Upper Respiratory: Pharyngitis, Otitis, Sinusitis, Antigen/Molecular
8 Bacteriology: Gastrointestinal Tract
8.1 Enteric Pathogens: Culture and Colony Morphology 8.2 Clostridioides difficile, Shiga Toxin, and Serotyping 8.3 Helicobacter pylori Detection and GI Pathogenicity
9 Bacteriology: Skin, Soft Tissue, and Bone
9.1 Skin, Soft Tissue, and Bone Pathogens 9.2 Bite Wounds and Zoonotic Infections 9.3 SST Pathogenicity and Virulence Mechanisms
10 Bacteriology: Genital Tract and Urine
10.1 Genital Flora and Vaginitis Pathogens 10.2 Neisseria gonorrhoeae, Chlamydia trachomatis, GBS, and Mycoplasma 10.3 Urinary Pathogens, Colony Counts, and Urinalysis Correlation
11 Bacteriology: Identification Methods
11.1 Colony Morphology and Rapid Presumptive Tests 11.2 Conventional Biochemicals and Commercial Kits 11.3 Automated Methods, MALDI-TOF MS, Molecular, and 16S Sequencing
12 Bacteriology: Antimicrobial Susceptibility and Resistance
12.1 Microbroth Dilution, Disk Diffusion, and Gradient Diffusion 12.2 Phenotypic Detection of Resistance 12.3 Antibiotic Classes, Intrinsic Resistance, and Genetic Markers
13 Bacteriology: Resistance Screening and Select Agents
13.1 MRSA/MSSA, VRE, ESBL/CRE Screening 13.2 BSL-3 Pathogens and Select-Agent Presumptive Identification 13.3 Laboratory Response Network and Select-Agent Pathogenicity
14 Mycobacteriology and Nocardia
14.1 Specimens, Major Pathogens, and Disease States 14.2 Acid-Fast Reaction, Colony Morphology, and Growth Characteristics 14.3 Identification Methods, Direct Molecular Detection, and TB Therapy
15 Virology
15.1 Respiratory, Vesicle, Meningitis, and GI Viruses 15.2 Hepatitis, HIV, and Immunocompromised-Host Viruses 15.3 Direct Detection Methods and HPV Cervical Screening
16 Parasitology
16.1 Blood, Tissue, and Brain Protozoa 16.2 Intestinal/Urogenital Protozoa and Helminths 16.3 Microscopy, Antigen/Molecular Detection, Insects and Arthropods
17 Mycology
17.1 Yeasts: Candida, Cryptococcus, and Malassezia 17.2 Dimorphic Fungi and Dermatophytes 17.3 Mucorales, Hyaline Molds, Pneumocystis, and Identification Methods
18 Serology
18.1 Immunoglobulin Response and Antigen-Antibody Methods 18.2 Viral Serodiagnosis: Hepatitis, EBV, HIV, CMV, Rubella, Measles 18.3 Treponema, Borrelia, and TB Infection Serodiagnosis
19 Laboratory Operations: Postanalytic Procedures and Quality
19.1 Documentation, Critical Values, Corrected Reports, and Public Health 19.2 Quality Control, Root-Cause Analysis, and POCT 19.3 Proficiency Testing, Competency, and Accreditation
20 Laboratory Operations: Safety, Mathematics, and Instrumentation
20.1 Biosafety, PPE, Bloodborne Pathogens, and SDS 20.2 Emergencies and Packaging/Transportation of Specimens 20.3 Laboratory Mathematics and Instrumentation
19.2 Quality Control, Root-Cause Analysis, and POCT
Key Takeaways Explain This Topic AI
Quality spans preanalytic, analytic, and postanalytic phases; a correct identification does not rescue a mislabeled cup or an uncalled critical value.
After a missed organism or QC failure, hold related patient results and use 5 whys or a fishbone diagram to find the system cause rather than closing with blame alone.
Media QC is sterility, growth promotion, and selectivity or differential performance; stain, reagent, AST, and equipment QC must be in control before patient results are released.
Failed QC means hold patient results for that method, lot, or instrument until the failure is investigated, corrected, and in-control QC is documented.
Rapid flu, strep, and COVID POCT still require operator competency and QC; waived status is not an exemption from QC or from holding results when QC fails.
Last updated: August 2026
19.2 Quality Control, Root-Cause Analysis, and POCT
Quick Answer: Quality is preanalytic, analytic, and postanalytic. After a missed organism or QC failure, hold related patient results and find the system cause with 5 whys or a fishbone—do not stop at blaming one technologist. Media QC is sterility, growth promotion, and selectivity; stains, reagents, AST, and equipment need in-control QC the day of use. Failed QC means no patient release for that method. Rapid flu, strep, and COVID POCT still require operator competency and QC; waived is not "no QC."
Official outline IV.B Quality Assessment/Troubleshooting (guideline 2025-09-25 ) is M-tested laboratory operations: the three testing phases, root-cause analysis, quality control, and point-of-care testing. Proficiency testing, competency, and accreditation are 19.3. IV.F Laboratory Administration is SM-only.
Preanalytic, analytic, and postanalytic quality
A missed Shigella can be a transport delay (preanalytic), a failed selective agar (analytic), or a report that never reached infection control (postanalytic). Quality assessment looks at all three phases . Reviewing only the MALDI log after a wrong-patient report is incomplete quality.
Phase Microbiology examples Typical failure
Preanalytic Two identifiers, source, transport time and temperature, rejection Unlabeled CSF; refrigerated N. gonorrhoeae ; saliva submitted as sputum
Analytic Media, stains, reagents, identification, AST, instruments, QC Failed Gram-stain QC; chocolate lot that does not grow gonococci; out-of-range AST disk
Postanalytic Review, critical call, corrected report, public health Blood-culture stain not called; wrong name overwritten instead of corrected
Correlation is the exam skill. If Gram-stain QC fails, hold patient stains . If Campylobacter agar fails growth promotion, do not report "no Campylobacter." If an incubator ran at 31 °C overnight, do not autoverify negative cultures from that chamber.
Root-cause analysis after a miss or a QC fail
Root-cause analysis (RCA) asks why the system allowed the event, not only who touched the plate. Two tools appear on exams.
5 whys. Keep asking why until the answer is a process that can be redesigned. Example: Campylobacter missed on stool culture. Why? No growth on Campy agar. Why? The atmosphere was ambient air. Why? The jar catalyst was expired. Why? There was no scheduled check. Why? Equipment QC omitted Campy jars. The root is a missing equipment-QC process , not "the night technologist is careless."
Fishbone (Ishikawa). Draw spines for people, process, equipment, materials (media and reagents), environment (temperature, CO2, anaerobic or microaerophilic atmosphere), and measurement (QC organisms, timers). Plot the facts, then pick corrective actions that change the spine that actually failed.
RCA belongs after a sentinel miss (a sterile-site pathogen not cultured or not reported) and after repeated or unexplained QC failure . Retraining is appropriate when skill was the cause; it is not a universal close-out. Document the investigation, the corrective action, and a check that the action worked (the next Campy QC and a patient-like unknown grow). Do not discard implicated media, printouts, or worksheets until the investigation has what it needs. Do not release a batch of patient results "because they look reasonable" while QC is still out.
Quality control that M tests
Media QC. Challenge sterility (uninoculated incubated medium shows no growth), growth promotion (stock strains grow as expected), and selectivity or differential performance (inhibitors suppress what they should; MacConkey shows lactose fermentation as expected). Perform user QC on new lots and new shipments per SOP. In-house prepared media get full organism challenges. Commercially prepared media still need visual inspection (color, hemolysis, thickness, expiration, contamination). Media whose failure would miss a fastidious or enteric pathogen—chocolate, Campy, modified Thayer-Martin, selective enteric media—are the ones exams expect you to organism-challenge , not merely glance at.
Stain QC. Gram stain: known gram-positive and gram-negative controls ( S. aureus and E. coli are the classic pair) each day of use . Acid-fast: known positive and negative slides. If controls look wrong, stop patient smears . Over-decolorizing (everything gram-negative) and under-decolorizing (everything gram-positive) are analytic QC failures, not evidence that the patient has two cell walls.
Reagent QC. Catalase, oxidase, coagulase, PYR, indole, hippurate, and kit reagents need positive and negative controls on the schedule the SOP and manufacturer require (often each day or lot of use). Expired oxidase reagent is not "probably fine."
AST QC. Use CLSI-recommended ATCC QC strains for the method (commonly E. coli ATCC 25922, S. aureus ATCC 25923 or 29213, P. aeruginosa ATCC 27853, E. faecalis ATCC 29212). Out-of-range zones or MICs: repeat , investigate disks or panels, incubator, inoculum, and the QC strain— do not release patient AST from that run until QC is in control. A concerning patient MIC is not permission to ignore failed QC.
Equipment. Check incubators (typically 35 ± 2 °C for routine bacterial culture), CO2, anaerobic indicators, refrigerators and freezers, and blood-culture instrument status on the SOP schedule. Calibrate thermometers. Use autoclave biological indicators . Certify biosafety cabinets on schedule. MALDI and automated ID/AST systems follow manufacturer function checks and QC organisms.
Failed QC correlates one-to-one with patient-result hold for that method, lot, or instrument. Document the failure, the investigation, the corrective action, and the first in-control QC before resuming.
Point-of-care testing in microbiology
Microbiology POCT on M is rapid antigen (and some cartridge molecular) testing for influenza, group A strep, and SARS-CoV-2, sometimes RSV. Waived tests require following the manufacturer's instructions exactly , operator training, and the QC the insert and SOP require: an internal control on each device plus external positive/negative QC on new lots or kits and at defined intervals. Moderate-complexity POCT (many rapid molecular platforms) adds CLIA moderate rules: tighter QC, PT when required, and the competency methods that apply (19.3).
Waived status is not an exemption from QC, competency, or two-identifier patient identification. Nursing and ED operators who run the kits are testing personnel under the CLIA certificate; the laboratory director still owns the method. If external QC is out, stop patient testing on that kit. Do not report a faint patient line obtained while the positive control was negative. Do not substitute a different brand's swab or transport liquid in a waived kit. Do not autoverify POCT when the internal control failed.
Exam traps
Releasing CSF Gram stains after both QC organisms look gram-negative.
Closing a missed-organism event with "counseled the tech" and no media or atmosphere check.
Treating commercially prepared Campy or chocolate agar as no-QC wallpaper.
Reporting patient AST with failed ATCC QC because the floor "needed results."
Continuing waived influenza testing with failed external QC.
Hold-the-result discipline is the quality item that protects every other M answer. Practice QC-fail stems in the free ASCP M practice bank .