Study guide
20.1 Biosafety, PPE, Bloodborne Pathogens, and SDS
ASCP Microbiology Technologist M ASCP
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current M(ASCP) Exam Facts 1.2 CAT, Scoring, Retakes, and CMP 1.3 Eligibility Routes and Clinical Experience
2 Preanalytic: Collection and Transport
2.1 Patient Identification and Specimen Labeling 2.2 Specimen Collection, Sterile Technique, and Blood Cultures 2.3 Transport Devices, Atmosphere, Time, and Temperature
3 Preanalytic: Processing, Media, and Incubation
3.1 Prioritization, Rejection, and Specimen Preparation 3.2 Media Types, Components, and Selection 3.3 Inoculation, Incubation Conditions, and Slide Preparation
4 Preanalytic: Stains
4.1 Gram Stain: Procedure, Principle, and Interpretation 4.2 Acid-Fast and Modified Acid-Fast Stains 4.3 KOH, Calcofluor-White, Trichrome, Giemsa, and Acridine Orange
5 Bacteriology: Blood and Bone Marrow
5.1 Blood Culture Systems and Rapid Identification 5.2 Bloodstream Pathogens and Skin Flora Significance 5.3 Endocarditis, Bone Marrow Pathogens, and Pathogenicity
6 Bacteriology: CSF and Sterile Body Fluids
6.1 CSF Sources and Acute Meningitis Pathogens 6.2 Shunt Infections, CSF Correlates, Antigen and Molecular Methods 6.3 Sterile Body Fluids: Pathogens, Flora, and Molecular Methods
7 Bacteriology: Respiratory Tract
7.1 Lower Respiratory Specimens, CAP, and HAP Pathogens 7.2 Cystic Fibrosis Pathogens and Quantitative Reporting 7.3 Upper Respiratory: Pharyngitis, Otitis, Sinusitis, Antigen/Molecular
8 Bacteriology: Gastrointestinal Tract
8.1 Enteric Pathogens: Culture and Colony Morphology 8.2 Clostridioides difficile, Shiga Toxin, and Serotyping 8.3 Helicobacter pylori Detection and GI Pathogenicity
9 Bacteriology: Skin, Soft Tissue, and Bone
9.1 Skin, Soft Tissue, and Bone Pathogens 9.2 Bite Wounds and Zoonotic Infections 9.3 SST Pathogenicity and Virulence Mechanisms
10 Bacteriology: Genital Tract and Urine
10.1 Genital Flora and Vaginitis Pathogens 10.2 Neisseria gonorrhoeae, Chlamydia trachomatis, GBS, and Mycoplasma 10.3 Urinary Pathogens, Colony Counts, and Urinalysis Correlation
11 Bacteriology: Identification Methods
11.1 Colony Morphology and Rapid Presumptive Tests 11.2 Conventional Biochemicals and Commercial Kits 11.3 Automated Methods, MALDI-TOF MS, Molecular, and 16S Sequencing
12 Bacteriology: Antimicrobial Susceptibility and Resistance
12.1 Microbroth Dilution, Disk Diffusion, and Gradient Diffusion 12.2 Phenotypic Detection of Resistance 12.3 Antibiotic Classes, Intrinsic Resistance, and Genetic Markers
13 Bacteriology: Resistance Screening and Select Agents
13.1 MRSA/MSSA, VRE, ESBL/CRE Screening 13.2 BSL-3 Pathogens and Select-Agent Presumptive Identification 13.3 Laboratory Response Network and Select-Agent Pathogenicity
14 Mycobacteriology and Nocardia
14.1 Specimens, Major Pathogens, and Disease States 14.2 Acid-Fast Reaction, Colony Morphology, and Growth Characteristics 14.3 Identification Methods, Direct Molecular Detection, and TB Therapy
15 Virology
15.1 Respiratory, Vesicle, Meningitis, and GI Viruses 15.2 Hepatitis, HIV, and Immunocompromised-Host Viruses 15.3 Direct Detection Methods and HPV Cervical Screening
16 Parasitology
16.1 Blood, Tissue, and Brain Protozoa 16.2 Intestinal/Urogenital Protozoa and Helminths 16.3 Microscopy, Antigen/Molecular Detection, Insects and Arthropods
17 Mycology
17.1 Yeasts: Candida, Cryptococcus, and Malassezia 17.2 Dimorphic Fungi and Dermatophytes 17.3 Mucorales, Hyaline Molds, Pneumocystis, and Identification Methods
18 Serology
18.1 Immunoglobulin Response and Antigen-Antibody Methods 18.2 Viral Serodiagnosis: Hepatitis, EBV, HIV, CMV, Rubella, Measles 18.3 Treponema, Borrelia, and TB Infection Serodiagnosis
19 Laboratory Operations: Postanalytic Procedures and Quality
19.1 Documentation, Critical Values, Corrected Reports, and Public Health 19.2 Quality Control, Root-Cause Analysis, and POCT 19.3 Proficiency Testing, Competency, and Accreditation
20 Laboratory Operations: Safety, Mathematics, and Instrumentation
20.1 Biosafety, PPE, Bloodborne Pathogens, and SDS 20.2 Emergencies and Packaging/Transportation of Specimens 20.3 Laboratory Mathematics and Instrumentation
20.1 Biosafety, PPE, Bloodborne Pathogens, and SDS
Key Takeaways Explain This Topic AI
OSHA Bloodborne Pathogens requires a written exposure control plan, engineering controls, work-practice controls, PPE, training, and free hepatitis B vaccine for employees with occupational exposure.
Standard precautions apply to every specimen; add contact, droplet, or airborne precautions by route, with a fit-tested N95 or PAPR when the hazard is droplet nuclei.
Forbidden bench habits are mouth pipetting and eating or storing food with specimens; infectious centrifugations use sealed cups unloaded in a certified Class II BSC.
SDS and GHS pictograms drive chemical response: do not mix bleach with acids, ammonia, or formaldehyde; phenol and formalin have specific spill and first-aid steps.
Most diagnostic bacteriology is BSL-2; Mycobacterium tuberculosis culture and sentinel rule-out of high-risk agents are BSL-3 practices. Outline IV.F administration is SM-only.
Last updated: August 2026
20.1 Biosafety, PPE, Bloodborne Pathogens, and SDS
Quick Answer: OSHA Bloodborne Pathogens requires an exposure control plan, engineering controls, and free hepatitis B vaccine for at-risk employees. Wear gloves, fluid-resistant gowns, and eye protection for splash; use a fit-tested N95 or PAPR for airborne work. No mouth pipetting, no food at the bench, sealed centrifuge cups, and a certified Class II BSC for aerosols. Most diagnostic bacteriology is BSL-2; M. tuberculosis culture and many high-risk rule-out organisms are BSL-3. Read the SDS before a phenol, formalin, or bleach spill—never mix bleach with acids, ammonia, or formaldehyde.
Official outline IV.C Safety (content guideline revised 2025-09-25 ) sits inside Domain IV Laboratory Operations ( 10–15% of M). This section is the prevention program: bloodborne pathogens, PPE, safe work practices, chemical documents, and BSL-2 versus BSL-3. Needlesticks, eyewash, fire, and shipping are 20.2. Mathematics and instruments are 20.3. IV.F Laboratory Administration (operation, management, communication, education) is SM-only and is not M-tested —do not spend exam time on staffing models, budgets, or education-program design.
Bloodborne pathogens and the OSHA program
The OSHA Bloodborne Pathogens (BBP) standard (29 CFR 1910.1030) is the legal backbone for clinical laboratories. HBV, HCV, and HIV travel in blood and other potentially infectious materials (OPIM): serum, CSF, synovial and amniotic fluids, semen, unfixed tissue, and any fluid visibly contaminated with blood. Microbiology adds cultured organisms as a second infectious class.
A compliant program has named pieces the exam tests:
Exposure control plan — a written list of tasks with exposure risk, the engineering and work-practice controls that reduce that risk, PPE, training, and post-exposure steps. It is reviewed at least annually and after incidents.
Hepatitis B vaccine — offered free to employees with reasonably anticipated occupational exposure, after training and within 10 days of assignment. Declination must be signed; the employee may reverse it later. HBV vaccine is the only pathogen-specific vaccine OSHA requires in the BBP standard; HIV and HCV have no equivalent occupational vaccine.
Engineering controls — devices that isolate the hazard: puncture-resistant sharps containers, safety-engineered needles, splash shields, centrifuge safety cups, and biological safety cabinets . They sit above PPE in the hierarchy of controls because they do not depend on perfect human behavior.
Work-practice controls — how people use those devices: no recapping of needles (one-handed scoop only if recapping is truly unavoidable), no mouth pipetting, hand hygiene after glove removal, and no food, drink, cosmetics, or contact-lens handling in the technical area.
Training, labels, and medical records — biohazard labels on refrigerators and waste, training at hire and at least annually, and confidential exposure and medical records retained for employment plus 30 years .
Standard precautions treat every specimen as potentially infectious. They replaced older universal-precautions language and apply to blood, OPIM, and non-intact skin. Microbiology then adds transmission-based precautions when the organism's route is known:
Precaution Route Microbiology examples Bench implication
Standard All specimens Every blood, body fluid, and culture Gloves; hand hygiene; sharps in puncture-resistant containers
Contact Direct or indirect touch MRSA, VRE, C. difficile , scabies Gown plus gloves; sporicidal disinfection for C. difficile
Droplet Large respiratory droplets N. meningitidis , H. influenzae , influenza, pertussis Surgical mask for close patient contact; BSC still for culture aerosols
Airborne Droplet nuclei about 1–5 µm M. tuberculosis , measles, varicella N95 or PAPR; negative-pressure room for the patient; BSL-3 for TB culture
A CSF Gram stain with Gram-negative diplococci is a droplet event for the patient-care team; the culture of N. meningitidis is still handled in a BSC because vortexing and flaming generate aerosols. Do not confuse the patient's isolation category with the laboratory's BSL.
PPE: gloves, gowns, eyes, and respirators
Gloves (nitrile is the usual latex replacement) are worn for every specimen and culture. Change them between dirty and clean tasks, and never walk out of the laboratory wearing them. Double-gloving is used for some BSL-3 and high-titer viral work; it is not a substitute for a BSC.
Gowns are fluid-resistant. A cloth coat that soaks through is not PPE. Cover the wrists, tie the back, and remove the gown before leaving the technical area. A soaked gown is a spill—change it.
Eye and face protection (goggles or a face shield) is required when splash is reasonably anticipated: uncapping tubes, pouring discard, opening a positive blood-culture bottle, and making smears from liquid media. Prescription eyeglasses are not PPE.
Respiratory protection is not a surgical mask when the hazard is airborne. A fit-tested N95 filtering facepiece or a powered air-purifying respirator (PAPR) is required for airborne-precaution patients and for procedures that can aerosolize M. tuberculosis or other airborne agents outside a certified cabinet. A surgical mask stops droplets, not droplet nuclei. Fit testing is annual and after facial-structure change; a leaking N95 is not an N95.
A usable exam donning order is gown, then mask or respirator, then eye protection, then gloves last. Removal starts with gloves (or gown-and-gloves together), then eyes, then the respirator, then hand hygiene. Hospital SOP is the authority at work; the exam tests that the respirator comes off last so you do not inhale what just left the gown.
Safe work practices and the Class II BSC
No mouth pipetting. Mechanical pipettes exist because historical mouth pipetting transmitted Salmonella , Shigella , and Brucella .
No eating, drinking, chewing gum, applying cosmetics, or storing food in refrigerators that hold specimens or reagents. A reagent refrigerator with a biohazard sticker is still not a lunch box.
Centrifuge safety cups or sealed rotors are used for infectious specimens (sputum digests, blood, stool concentrates). Load and unload the sealed cup inside the BSC . If a tube breaks, leave the centrifuge closed for at least 30 minutes so aerosols settle, then open it in a BSC with PPE and disinfect.
Aerosol-generating procedures—vortexing, grinding tissue, sonicating, flaming loops from liquid media, opening lyophilized vials, and subculturing positive mycobacterial bottles—belong in a certified Class II biological safety cabinet . Class II protects personnel, product, and environment with HEPA-filtered downflow and exhaust. Class I protects personnel and environment but not the culture. Class III is a gas-tight glove box used at BSL-4. The common clinical cabinet is Class II A2 (partial recirculation). Do not use an A2 for volatile toxic chemicals; those need a chemical fume hood or a total-exhaust (B2) cabinet. A UV lamp is an optional extra, not a substitute for wiping the work surface with an EPA-registered intermediate-level or tuberculocidal disinfectant.
Work several inches inside the sash, do not block the front or rear grilles, and disinfect at the start and end of work and after a spill. Annual certification (and recertification after relocation) is pass/fail: an uncertified cabinet is not a BSC.
SDS, GHS pictograms, and named chemical spills
Every hazardous chemical has a Safety Data Sheet (SDS) in the 16-section GHS format. Section 2 is hazards, Section 4 first aid, Section 6 accidental release, Section 8 exposure controls, Section 11 toxicology. Read it before the spill. Pictograms the micro bench actually sees:
- Pictogram idea Meaning on the micro bench
- Flame Ethanol, methanol, acid-alcohol destain, isopropanol
- Corrosion Sodium hydroxide (AFB digest), phenol, concentrated acids
- Skull and crossbones Acute toxicants such as phenol and sodium azide in some reagents
- Health hazard Formaldehyde/formalin (carcinogen)
- Exclamation Irritants, including many stains and dilute bleach fumes
- Flame over circle Oxidizers (some bleach and peroxide disinfectants)
Phenol (phenolic disinfectants and some mycobacterial extraction methods) is corrosive and systemically toxic through skin. A phenol skin splash is wiped, then irrigated copiously; polyethylene glycol 300 or 400 is the classic decontamination aid where the SDS specifies it—do not treat phenol like a simple water-wash acid burn and walk away. Formaldehyde / 10% formalin (parasitology preservatives, some histopathology send-outs) is a sensitizer and a carcinogen; spills get the formalin kit, eye protection, and ventilation, not a casual paper-towel wipe.
Sodium hypochlorite (bleach) is the usual blood-spill disinfectant on nonporous surfaces. Many SOPs use a 1:10 dilution of household bleach (about 5–8% stock → about 0.5% available chlorine), prepared fresh. Exam arithmetic may instead start from a labeled 10% stock (20.3). Do not mix bleach with acids (chlorine gas), ammonia (chloramines), or formaldehyde (bis-chloromethyl ether, a carcinogen). Phenolic disinfectant plus bleach can also throw irritant fumes. Contain, absorb, and dispose as the SDS directs; concentrated reagent spills are chemical waste, not ordinary biohazard trash. Flammable stain solvents go in a flammable cabinet. Sodium azide can form explosive heavy-metal azides in metal drain pipes—do not dump azide down the sink.
BSL-2 versus BSL-3 for mycobacteria and select agents
BSL-2 is the default for clinical microbiology: agents that cause human disease by percutaneous, mucous-membrane, or ingestion routes, with limited aerosol risk during routine work. Restricted access, biohazard signage, a sink, an autoclave or equivalent waste stream, and a Class II BSC for aerosols define the space. Stool, urine, wound, genital, and most blood-culture work-up is BSL-2.
BSL-3 is required when the agent may cause serious or lethal disease by inhalation and when the laboratory is propagating that agent. Features include directional inward airflow, sealed penetrations, restricted access, and respiratory protection when work cannot be fully contained. Culture manipulation of M. tuberculosis is BSL-3 because a grown isolate is a concentrated aerosol (Chapter 14). Unidentified AFB from a pulmonary specimen are treated as TB until identified.
Sentinel rule-out of B. anthracis , Y. pestis , F. tularensis , and brucellosis-causing Brucella is performed in a Class II BSC using BSL-3 practices even inside a BSL-2 sentinel laboratory (Chapter 13). Confirmation belongs to the LRN. Brucella left the U.S. select-agent list on December 17, 2024 ; biosafety did not change —it remains a highly infectious, reportable, rule-out/refer organism and a classic laboratory-acquired infection. Do not sniff plates. Do not open-bench MALDI these isolates. Do not treat a BSL-2 door sign as permission to work a mold-like buff AFB colony on the open bench.
BSL-4 (high-consequence viral hemorrhagic fever agents) is not a hospital microbiology activity; those specimens follow public-health instruction.