Study guide

15.4 Quality Assurance and Improvement

ASCP Medical Laboratory Assistant MLA

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 About the ASCP MLA Exam 1.2 Eligibility Routes and Study Plan

2 Chapter 2: Orders, Identification & Communication

2.1 Review, Clarification, and Verification of Test Orders 2.2 Patient Identification 2.3 Patient Communication

3 Chapter 3: Collection Procedures

3.1 Patient Assessment and Preparation 3.2 Site Selection 3.3 Tubes, Anticoagulants, and Order of Draw 3.4 Specimen Types for Common Tests

4 Chapter 4: Special Collections, Reactions & Handling

4.1 Special Collection Procedures 4.2 Adverse Collection Reactions 4.3 Specimen Labeling and Immediate Handling

5 Chapter 5: Specimen Acceptability Assessment

5.1 Correct Specimen Type for the Test 5.2 Specimen Quality Assessment 5.3 Labeling Requirements and Rejection Criteria 5.4 Time, Temperature, and Light Handling

6 Chapter 6: Add-on Requests & Special Specimen Types

6.1 Specimen Suitability for Add-on Requests 6.2 Special Specimen Types

7 Chapter 7: Prioritization, Distribution & Transport

7.1 Department Distribution and Prioritization 7.2 Pneumatic Tube System 7.3 External Packaging and Shipment

8 Chapter 8: Specimen Processing Techniques

8.1 Centrifugation 8.2 Aliquoting 8.3 Non-Blood Specimen Processing 8.4 Microbiology Setup and Plating

9 Chapter 9: Slide Preparation & Specimen Storage

9.1 Slide Preparation 9.2 Specimen Storage (Pre- and Post-Testing)

10 Chapter 10: Reagents, Instrumentation & Quality Control

10.1 Reagents, Standards, and Controls 10.2 Analytical Instrumentation 10.3 Quality Control

11 Chapter 11: Critical Values, Results & Inventory

11.1 Critical Value Notification and Documentation 11.2 Result Retrieval and Review 11.3 Inventory Management

12 Chapter 12: Waived & Point-of-Care Testing

12.1 Waived and POC Instrument Operation 12.2 Waived/POC QC, Result Evaluation & Reporting

13 Chapter 13: Laboratory Regulations, Chemical & Fire Safety

13.1 Laboratory Regulations 13.2 Chemical Safety 13.3 Fire Safety

14 Chapter 14: Infection Control & Waste Disposal

14.1 Standard Precautions, PPE & Hand Hygiene 14.2 Biological Safety Cabinets, Sharps & Exposure Control 14.3 Biological and Hazardous Waste Disposal

15 Chapter 15: Equipment, Ethics, LIS & Quality Assurance

15.1 Laboratory Equipment Maintenance 15.2 Professionalism, Ethics & HIPAA 15.3 Laboratory Information System (LIS) Functions 15.4 Quality Assurance and Improvement

15.4 Quality Assurance and Improvement

Key Takeaways Explain This Topic AI

Quality assurance (QA) is the broad program that monitors the total testing process; quality control (QC) is the analytic check of method performance—related but not identical.

Most laboratory errors are pre-analytic (orders, ID, collection, labeling, transport, handling); MLAs have major influence in this phase.

Monitor and help reduce rejection rates, redraws, and labeling errors through careful technique, documentation, and feedback loops.

Occurrence reporting and entry-level awareness of corrective and preventive action (CAPA) support continuous improvement and accreditation readiness.

QA exists for patient safety—every prevented mislabel or redraw protects someone from delay, discomfort, or wrong treatment.

Last updated: August 2026

15.4 Quality Assurance and Improvement

Quick Answer: QA oversees the entire testing process ; QC checks whether an analytic method is in control. Most errors are pre-analytic , where MLAs work. Track rejections, redraws, and labeling errors ; report occurrences ; support CAPA and continuous improvement. Quality is not paperwork for surveyors—it is patient safety .

Quality assurance and improvement close Domain IV Laboratory Operations on the ASCP MLA content guideline (testing dates beginning June 1, 2026). You have already practiced QC at the bench (Domain III). This section zooms out: how the laboratory knows its system is safe, how the MLA contributes metrics and reports, and how small daily habits become measurable improvement.

QA vs QC: Clear Distinction

Concept Focus Examples

Quality control (QC) Analytic method performance—are reagents/instruments producing expected control values today? Running liquid controls on a chemistry analyzer; waived meter control solutions; blood gas QC

Quality assurance (QA) Programmatic oversight of the total testing process (pre-analytic, analytic, post-analytic) Monitoring mislabel rates, turnaround times, critical-call compliance, competency programs, proficiency testing review, patient ID audits

Quality improvement (QI) Structured projects to make processes better over time Reducing outpatient hemolysis by 30% via education and needle-gauge changes

QC is a tool inside QA , not a synonym for it. An MLA can run perfect QC on a waived meter and still harm patients with wrong-patient draws—that is a QA/pre-analytic failure, not a QC pass.

Exam trap phrasing: “QA is only for supervisors; MLAs only do QC.” Reality: MLAs generate the data QA programs monitor and execute the improved procedures.

Where Errors Happen: Pre-Analytic Majority

Decades of laboratory medicine literature and hospital QI data show that a majority of laboratory errors occur before analysis —in ordering, patient preparation, collection, labeling, transport, and processing. Analytic instrument failures and post-analytic misreports still matter, but the MLA’s daily world is the pre-analytic battlefield.

  • Pre-analytic error examples
  • Wrong patient identification
  • Wrong tube or order of draw errors causing contamination
  • Underfilled coagulation tubes
  • Unlabeled or mislabeled specimens
  • Delayed transport of time-sensitive tests
  • Specimens stored at wrong temperature or exposed to light
  • Clotted EDTA samples from poor mixing
  • IV-line draws with dilution/contamination when policy forbids or technique fails
  • Analytic and post-analytic (awareness level)
  • Instrument malfunction, expired reagents, failed QC (analytic)
  • Results sent to wrong chart, critical values not called, misinterpreted comments (post-analytic)

Understanding this distribution explains why accreditation checklists hammer patient ID, labeling, and specimen acceptance criteria —and why MLA training emphasizes them.

Monitoring Rejection Rates, Redraws, and Labeling Errors

Laboratories track key indicators. MLAs should know what they mean and how behavior moves the numbers.

  • Indicator What it measures MLA influence
  • Specimen rejection rate Percent of specimens unacceptable for testing Correct tubes, volumes, labels, handling

Redraw / recollect rate Extra sticks due to lab or collection issues First-draw quality; communication of fasting/timing

Labeling error rate Missing/wrong identifiers, wrong-patient labels Bedside labeling discipline; LIS accuracy

Hemolysis rate (often outpatient or ED draws) Traumatic draws, device issues, transport Technique, needle size, tourniquet time, pneumatic tube packing

Turnaround time (TAT) Order-to-result or collect-to-receive delays Prioritization, prompt delivery, downtime efficiency

Using metrics without gaming them

Do not reduce rejection rates by accepting unlabeled tubes “as a favor.” That lowers a metric while raising wrong-patient risk . True improvement fixes process so specimens arrive acceptable and safe. When a unit has chronic labeling problems, QA may partner with nursing education—the MLA contributes accurate rejection documentation that makes the problem visible.

Occurrence Reporting

An occurrence (incident, event, variance—terminology varies) is anything that should not have happened or almost happened: mislabel, wrong-patient near miss, injury, privacy breach, lost specimen, equipment failure affecting patients, etc.

MLA responsibilities

Recognize events and near misses (including “we caught it just in time”).

Secure the situation (stop testing, quarantine specimen, assist the patient).

Notify the appropriate charge person immediately for serious events.

Document in the occurrence reporting system with facts: who/what/when/where/how discovered; avoid speculation and blame essays.

Preserve evidence when instructed (do not discard the mislabeled tube if leadership needs it for investigation).

Participate honestly in follow-up interviews.

Near-miss reporting is a gift to the system. A culture that only punishes reporters will hide risks until a patient is harmed. Professionally, your duty is to report , not to decide alone that an event was “too small.”

CAPA Awareness at Entry Level

CAPA means Corrective and Preventive Action :

Corrective action: Fix the immediate problem and its root cause after something went wrong (e.g., retrain, change form design, repair centrifuge, revise label workflow).

Preventive action: Reduce likelihood of a potential problem before it occurs (e.g., add barcode scan step after a near miss on a similar unit).

Entry-level MLAs usually do not own the CAPA investigation, but they:

  • Provide accurate timelines and process descriptions
  • Implement new steps after CAPA (e.g., dual verification for blood bank draws)
  • Stop workarounds that reintroduce the old risk
  • Ask questions when a “fix” is unclear—silent noncompliance recreates error

If a CAPA says “all outpatient stations will use two identifiers aloud before labeling,” that is not optional flavor text; it is the controlled response to a real failure mode.

Continuous Improvement Examples for MLA Workflow

Quality improvement does not require a black belt certificate to start. Practical MLA-level improvements include:

  • Example 1: Reduce outpatient hemolysis
  • Baseline: track hemolyzed chemistry rejections for a month

Changes: enforce tourniquet time limits, prefer appropriate gauge, avoid fist pumping, improve gentle mixing, educate on line draws

  • Follow-up: remeasure hemolysis rate; share results with the team
  • Example 2: Cut labeling errors
  • Baseline: count unlabeled/mislabeled receipts by shift and location

Changes: ban pre-labeling, enforce bedside printing, add second-tech check for high-risk tests, improve downtime label kits

  • Follow-up: audit 20 random collections per week
  • Example 3: Improve specimen receipt TAT from ED
  • Baseline: collect-to-receive times
  • Changes: dedicated ED runner schedule, pneumatic tube packing training, STAT rack visual cues
  • Follow-up: weekly TAT dashboard review
  • Example 4: Refrigerator excursion readiness
  • Drill: simulate warm fridge alarm
  • Improvement: update phone tree, pre-assign backup unit space, stock move bins
  • Outcome: faster protection of reagents and fewer discarded kits

Document improvements so successes survive staff turnover. Celebrate reductions in redraws—they mean fewer painful sticks and faster answers for patients.

Connecting QA to Patient Safety

Every abstract metric maps to a human outcome:

  • Quality problem Patient impact
  • Wrong-patient label Wrong diagnosis/treatment; transfusion risk for blood bank errors
  • QNS / rejection without communication Delayed antibiotics, delayed discharge, repeated trauma
  • Hidden near miss Same trap waits for the next patient

Ignoring pre-analytic cold-chain failure Invalid viral loads, coagulation, or blood gas results guiding therapy

Falsified QC or temperatures Illusion of control; real analytic failure

Patient safety is the why behind logs, checklists, and occurrence forms. When documentation feels tedious, reframe it: you are leaving a trail that protects the next patient and your teammates.

The Total Testing Process (TTP) Mindset

Think of laboratory quality as a chain:

  • Pre-pre-analytic: test selection appropriateness (mostly provider-driven; MLA may flag obvious mismatches)
  • Pre-analytic: order review, prep, collection, transport, processing
  • Analytic: testing and QC
  • Post-analytic: reporting, critical notification, interpretation support
  • Post-post-analytic: clinical action on results

The MLA is strongest in steps 2–3 support roles. Excellence there multiplies the value of expensive analyzers downstream.

Survey Readiness Without Panic

Accrediting organizations (e.g., CAP, Joint Commission, COLA—depending on the lab) and CLIA inspections review QA evidence. Day-to-day habits that make surveys uneventful:

  • Real temperature and equipment logs (not blank pages)
  • Competency records current
  • SOPs followed as written or formally revised
  • Occurrence files complete
  • Staff who can explain what they do and why —including MLAs

If a surveyor asks how you identify patients, answer with your actual two-identifier process , not a memorized slogan you do not use.

Chapter Capstone: Domain IV Integration

This chapter tied equipment care, ethics/HIPAA, LIS discipline, and QA into one operations skill set:

  • Maintain tools so results are trustworthy
  • Protect people and privacy while serving them well
  • Enter and track data so the right tests occur on the right specimens
  • Measure and improve so tomorrow’s patients fare better than yesterday’s near misses

Domain IV supports everything in Domains I–III. Review collection, processing, QC, waived testing, safety, and regulations chapters together when you study, then stress-test yourself with free questions at /practice/ascp-mla .

You have completed the planned section set for this ASCP MLA study guide outline—use weighted practice (especially Domain II processing, the heaviest blueprint area) in your final review plan from Chapter 1.