Study guide

7.3 External Packaging and Shipment

ASCP Medical Laboratory Assistant MLA

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 About the ASCP MLA Exam 1.2 Eligibility Routes and Study Plan

2 Chapter 2: Orders, Identification & Communication

2.1 Review, Clarification, and Verification of Test Orders 2.2 Patient Identification 2.3 Patient Communication

3 Chapter 3: Collection Procedures

3.1 Patient Assessment and Preparation 3.2 Site Selection 3.3 Tubes, Anticoagulants, and Order of Draw 3.4 Specimen Types for Common Tests

4 Chapter 4: Special Collections, Reactions & Handling

4.1 Special Collection Procedures 4.2 Adverse Collection Reactions 4.3 Specimen Labeling and Immediate Handling

5 Chapter 5: Specimen Acceptability Assessment

5.1 Correct Specimen Type for the Test 5.2 Specimen Quality Assessment 5.3 Labeling Requirements and Rejection Criteria 5.4 Time, Temperature, and Light Handling

6 Chapter 6: Add-on Requests & Special Specimen Types

6.1 Specimen Suitability for Add-on Requests 6.2 Special Specimen Types

7 Chapter 7: Prioritization, Distribution & Transport

7.1 Department Distribution and Prioritization 7.2 Pneumatic Tube System 7.3 External Packaging and Shipment

8 Chapter 8: Specimen Processing Techniques

8.1 Centrifugation 8.2 Aliquoting 8.3 Non-Blood Specimen Processing 8.4 Microbiology Setup and Plating

9 Chapter 9: Slide Preparation & Specimen Storage

9.1 Slide Preparation 9.2 Specimen Storage (Pre- and Post-Testing)

10 Chapter 10: Reagents, Instrumentation & Quality Control

10.1 Reagents, Standards, and Controls 10.2 Analytical Instrumentation 10.3 Quality Control

11 Chapter 11: Critical Values, Results & Inventory

11.1 Critical Value Notification and Documentation 11.2 Result Retrieval and Review 11.3 Inventory Management

12 Chapter 12: Waived & Point-of-Care Testing

12.1 Waived and POC Instrument Operation 12.2 Waived/POC QC, Result Evaluation & Reporting

13 Chapter 13: Laboratory Regulations, Chemical & Fire Safety

13.1 Laboratory Regulations 13.2 Chemical Safety 13.3 Fire Safety

14 Chapter 14: Infection Control & Waste Disposal

14.1 Standard Precautions, PPE & Hand Hygiene 14.2 Biological Safety Cabinets, Sharps & Exposure Control 14.3 Biological and Hazardous Waste Disposal

15 Chapter 15: Equipment, Ethics, LIS & Quality Assurance

15.1 Laboratory Equipment Maintenance 15.2 Professionalism, Ethics & HIPAA 15.3 Laboratory Information System (LIS) Functions 15.4 Quality Assurance and Improvement

7.3 External Packaging and Shipment

Key Takeaways Explain This Topic AI

Most routine clinical specimens ship as Biological Substance, Category B (UN3373); Category A is for higher-risk infectious substances that meet strict criteria

Use triple packaging: leak-proof primary, leak-proof secondary with absorbent material, and a rigid outer package with correct marks/labels

Cold packs and dry ice are not interchangeable—dry ice is a dangerous good with ventilation and labeling rules

Paperwork, manifests, and shipper declarations must match contents; never ship unlabeled or identity-uncertain specimens

If packaging integrity fails (leak, wrong temperature control, missing forms), fix or escalate before the courier leaves

Last updated: August 2026

7.3 External Packaging and Shipment

Quick Answer: Outside the facility, clinical specimens follow DOT (ground) and IATA (air) dangerous-goods rules. Most routine diagnostic specimens are Biological Substance, Category B (UN3373) and require triple packaging with absorbent material . Category A applies only to substances meeting higher infectious-risk criteria and uses stricter packaging/labeling. Choose cold packs vs dry ice per the assay—not by habit—and complete manifests/paperwork . Never ship unlabeled or identity-uncertain materials.

When specimens leave your laboratory for a reference lab, public health lab, or other external site, the MLA’s packaging work becomes a regulatory and safety task as well as a quality task. Bad packaging causes leaks in trucks and planes, rejected shipments, delayed diagnoses, and exposure risk for couriers.

DOT and IATA Basics (What the MLA Needs)

Framework Typical scope Why it matters

DOT (U.S. Department of Transportation) Hazardous materials in U.S. transport, including many ground shipments Packaging, marking, and shipping papers for ground couriers

IATA Dangerous Goods Regulations Air transport standards used by airlines and air couriers Air shipments of biological substances and dry ice

USPS / courier-specific rules Additional carrier acceptance policies A package can be “almost right” and still be refused

You are not expected to memorize every packing instruction number, but you are expected to follow your laboratory’s validated shipping SOP, use the correct kit or carton, apply the correct marks, and refuse to send incomplete packages.

Clinical specimen vs other materials

Patient diagnostic specimens going for clinical testing are usually handled under biological substance rules.

Cultures of high-risk agents , certain research materials, or samples known to meet Category A definitions may require upgraded classification.

Dry ice , when used, is itself a regulated material (carbon dioxide, solid) with separate marks and quantity limits.

Formalin or other chemicals in shipped tissues may add chemical hazard considerations beyond the blood-tube routine.

When classification is unclear, escalate —do not downgrade a Category A situation to Category B for convenience.

  • Category A vs Category B
  • Category B (most routine clinical shipments)

Biological Substance, Category B is the classification used for many human/animal specimens transported for routine diagnostic purposes when they do not meet Category A criteria. In transport marking this commonly appears as:

  • UN3373
  • Proper shipping name: Biological Substance, Category B

Category B still requires proper triple packaging and leak protection. “Category B” does not mean “throw tubes in a box.”

Category A (higher risk)

Category A infectious substances are capable of causing permanent disability, life-threatening, or fatal disease in otherwise healthy humans or animals when exposure occurs, as defined in transport regulations. They use different UN numbers and much stricter packaging instructions (commonly discussed in training as PI 620-type systems—follow current SOPs and trained shipper procedures).

  • Feature Category B (typical clinical) Category A
  • Risk level (regulatory) Lower classification for many diagnostics Higher infectious risk classification
  • Common mark UN3373 Different UN numbers / labels per regs

Who ships Trained staff per lab SOP; still regulated Requires appropriate dangerous-goods training and packaging

MLA action if suspected Follow SOP; escalate if unsure Do not improvise Category B packaging

Exam pearl: For ordinary blood, urine, and similar clinical diagnostic specimens, think Category B / UN3373 unless policy or clinical information places the material in a higher category.

Triple Packaging Concept

Triple packaging is the backbone of safe biological specimen transport.

The three layers

  • Primary receptacle
  • Watertight / leak-proof tube, vial, or cup
  • Labeled with patient identifiers and collection data
  • Cap secured (parafilm only if SOP allows as extra security—not a substitute for a proper cap)
  • Secondary packaging
  • Watertight / leak-proof
  • Contains enough absorbent material to absorb the entire liquid contents of all primaries if they fail
  • Multiple fragile primaries wrapped so they cannot break each other
  • Outer packaging
  • Rigid strength appropriate to the shipping instruction
  • Protects against crush and weather in normal transport

Displays required marks/labels (for example UN3373 diamond mark and the words “Biological Substance, Category B” as applicable)

  • Includes shipper and consignee information
  • Absorbent material

Absorbent is not optional decoration. It must be capable of soaking up the full liquid volume of the primaries inside the secondary. Common choices include cellulose pads or other validated absorbents in commercial shippers. Paper scraps that leave free liquid in the bag are inadequate.

Why triple packaging fails in real life

  • Failure Result
  • Primary not fully closed Leak into secondary; possible seepage to outer box
  • No absorbent Free blood/urine in secondary; courier refusal or exposure
  • Soft outer envelope only when rigid outer is required Crush breakage
  • Primaries clacking together Hemolysis, cracked tubes
  • Labels only on outer box, none on primary Identity loss if contents separate
  • Wet outer package Carrier rejection; biohazard handling event
  • Cold Packs vs Dry Ice (Overview)

Temperature control is assay-specific. Guessing destroys analytes.

Coolant Typical use Key cautions

Cold packs / gel packs Refrigerated (approx. 2–8 °C) transport when validated Condition packs (freeze/thaw per SOP) so specimens do not freeze unless freezing is intended; separate samples from direct contact if freeze-burn is a risk

Frozen cold packs / validated frozen shippers Some frozen analytes without dry ice Must maintain frozen state for the full transit time

Dry ice (solid CO₂) Specimens that must stay frozen hard for long or air transport Dry ice sublimates to CO₂ gas—package must vent ; dry ice is a regulated dangerous good with net weight marking and handling rules; never seal dry ice in a completely airtight container that can rupture

Ambient Only when the test directory says ambient is acceptable Do not add ice “to be safe” if freezing harms the analyte

Dry ice practical points for MLAs

Wear appropriate protection; dry ice causes cold burns.

Do not place dry ice in a fully airtight non-venting container.

Record dry ice weight when forms require it.

Do not touch dry ice with bare wet hands.

Ensure the specimen is in a primary that will not crack from extreme cold if not rated for it.

If the reference lab requires refrigerated—not frozen—do not ship on dry ice. Over-freezing can be as wrong as overheating.

Paperwork, Manifests, and Documentation

A package is incomplete without matching documentation.

Typical documents / data elements

  • Item Purpose
  • Test requisition / electronic order details Tells the receiving lab what to run
  • Specimen manifest / packing list Counts and IDs of samples in the box
  • Collection date/time and specimen type Acceptability and interpretation
  • Relevant clinical data / ICD as required Some send-outs reject incomplete clinical info
  • Shipper contact information Problem resolution in transit

Dangerous goods marks / declarations when required Legal transport compliance (especially air / dry ice / Category A)

  • Temperature logger when used Proof of cold chain
  • Manifest discipline

The number of tubes in the box must match the manifest.

Barcodes and names must match primaries.

If you remove a specimen at the last minute, update the paperwork—do not let a ghost entry travel.

Keep a lab copy or electronic record of what shipped and when.

Couriers and receiving laboratories reject shipments with missing forms almost as often as they reject leaking boxes.

Never Ship Unlabeled Specimens

Unlabeled or misidentified specimens must not leave the laboratory for external testing. External labs cannot safely invent identity. Shipping an unlabeled tube:

  • Risks results on the wrong patient
  • Usually forces automatic rejection
  • Wastes courier cost and delays care
  • Creates quality and possible compliance events
  • Identity rules before sealing the box

Two identifiers on each primary (per policy—typically name + second unique ID).

Accession/barcode readable and matched to paperwork.

Aliquots labeled as completely as primaries—do not ship “tube 2” with no name.

If a label falls off during packing, stop ; relabel only under documented policy or recollect.

Do not ship “the only sample we have” unlabeled because recollection is inconvenient—follow rejection policy and notify the provider/unit.

The same rule applies to partial labels , mismatched names, or containers labeled with only a room number.

Pre-Ship Final Inspection

Before the courier takes the package:

Correct classification (usually Category B UN3373 for routine clinical).

Triple packaging intact; absorbent present.

Temperature control correct (ambient / cold pack / dry ice).

Outer marks/labels present and not covered by tape.

Paperwork complete and matched to contents.

All primaries labeled.

No external contamination on the box.

Ship-to address and account numbers correct.

  • If any item fails, fix or escalate —do not “send it anyway and hope.”
  • Scenarios
  • Scenario A — Routine referral chemistry

Serum aliquots, Category B triple pack, cold packs per test directory, requisitions enclosed, UN3373 marking applied. Appropriate.

Scenario B — Dry ice misuse

A refrigerated-only analyte is buried in dry ice “so it stays cold.” Wrong temperature mode; re-pack per directory.

Scenario C — Unlabeled aliquot

A poured aliquot for send-out has no patient identifiers. Do not ship. Label under policy or recollect; document.

Scenario D — Leaking primary found at pack-out

Do not place a wet tube in the box. Transfer per SOP to a new labeled container if allowed, or cancel/recollect; replace contaminated packaging materials.

Connection to Other Chapters

External shipment builds on special specimen handling, time/temperature control, and prioritization (ship STATs and unstable send-outs on the correct courier, not the next convenient bulk run). Practice packaging and classification judgment on /practice/ascp-mla .

Key Takeaways

Routine clinical send-outs are usually Category B / UN3373 , not unregulated parcels.

Triple packaging + absorbent protects people and specimens.

Cold packs ≠ dry ice ; follow the assay and dry-ice venting/marking rules.

Manifests and forms must match what is in the box.

Never ship unlabeled or identity-uncertain specimens.