Study guide
13.2 Chemical Safety
ASCP Medical Laboratory Assistant MLA
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the ASCP MLA Exam 1.2 Eligibility Routes and Study Plan
2 Chapter 2: Orders, Identification & Communication
2.1 Review, Clarification, and Verification of Test Orders 2.2 Patient Identification 2.3 Patient Communication
3 Chapter 3: Collection Procedures
3.1 Patient Assessment and Preparation 3.2 Site Selection 3.3 Tubes, Anticoagulants, and Order of Draw 3.4 Specimen Types for Common Tests
4 Chapter 4: Special Collections, Reactions & Handling
4.1 Special Collection Procedures 4.2 Adverse Collection Reactions 4.3 Specimen Labeling and Immediate Handling
5 Chapter 5: Specimen Acceptability Assessment
5.1 Correct Specimen Type for the Test 5.2 Specimen Quality Assessment 5.3 Labeling Requirements and Rejection Criteria 5.4 Time, Temperature, and Light Handling
6 Chapter 6: Add-on Requests & Special Specimen Types
6.1 Specimen Suitability for Add-on Requests 6.2 Special Specimen Types
7 Chapter 7: Prioritization, Distribution & Transport
7.1 Department Distribution and Prioritization 7.2 Pneumatic Tube System 7.3 External Packaging and Shipment
8 Chapter 8: Specimen Processing Techniques
8.1 Centrifugation 8.2 Aliquoting 8.3 Non-Blood Specimen Processing 8.4 Microbiology Setup and Plating
9 Chapter 9: Slide Preparation & Specimen Storage
9.1 Slide Preparation 9.2 Specimen Storage (Pre- and Post-Testing)
10 Chapter 10: Reagents, Instrumentation & Quality Control
10.1 Reagents, Standards, and Controls 10.2 Analytical Instrumentation 10.3 Quality Control
11 Chapter 11: Critical Values, Results & Inventory
11.1 Critical Value Notification and Documentation 11.2 Result Retrieval and Review 11.3 Inventory Management
12 Chapter 12: Waived & Point-of-Care Testing
12.1 Waived and POC Instrument Operation 12.2 Waived/POC QC, Result Evaluation & Reporting
13 Chapter 13: Laboratory Regulations, Chemical & Fire Safety
13.1 Laboratory Regulations 13.2 Chemical Safety 13.3 Fire Safety
14 Chapter 14: Infection Control & Waste Disposal
14.1 Standard Precautions, PPE & Hand Hygiene 14.2 Biological Safety Cabinets, Sharps & Exposure Control 14.3 Biological and Hazardous Waste Disposal
15 Chapter 15: Equipment, Ethics, LIS & Quality Assurance
15.1 Laboratory Equipment Maintenance 15.2 Professionalism, Ethics & HIPAA 15.3 Laboratory Information System (LIS) Functions 15.4 Quality Assurance and Improvement
13.2 Chemical Safety
Key Takeaways Explain This Topic AI
Safety Data Sheets (SDS) provide standardized hazard, first-aid, PPE, spill, and storage information—know how to find and use key sections before handling a chemical.
GHS pictograms and labels communicate physical, health, and environmental hazards on primary and secondary containers.
Secondary containers must be labeled with identity and hazard information per OSHA/GHS and facility policy—never leave unknown liquids in unlabeled bottles.
Spill response starts with personal safety, PPE, correct spill kit/materials, and reporting; never pour chemical waste down the drain against policy.
Store chemicals by compatibility (for example acids away from bases; oxidizers away from flammables) using designated cabinets and SOPs.
Last updated: August 2026
13.2 Chemical Safety
Quick Answer: Before you handle a laboratory chemical, know the hazard , the PPE , and the spill/first-aid response . Use the SDS , read GHS labels/pictograms , label every secondary container , clean spills only within your training, and never pour chemicals down the drain against policy.
Medical laboratory assistants work around alcohols, disinfectants, acids/bases (in some areas), fixatives, stains, and instrument reagents. You may not mix every reagent yourself, but you transport, store, pour, wipe, and discard materials that can burn skin, damage eyes, irritate lungs, or catch fire. Domain IV expects practical chemical-safety literacy.
The chemical hygiene mindset
Treat every unfamiliar bottle as hazardous until you verify otherwise:
Identify the product (label + SDS).
Assess routes of exposure (skin, eyes, inhalation, ingestion).
Control the hazard (PPE, ventilation, secondary containment, technique).
Respond to spills/exposures per SOP and report them.
Dispose only through approved waste streams.
If a label is missing, unreadable, or the liquid “doesn’t match” the bottle name— stop . Do not sniff, taste, or guess.
Safety Data Sheets (SDS)
An SDS is the manufacturer’s standardized hazard communication document for a product. Facilities must make SDS information accessible to employees. Learn where your lab keeps SDS (binder, intranet, QR system) before an emergency.
How MLAs use SDS sections (practical map)
GHS-aligned SDS documents use a 16-section format. You do not need to recite every section number on the exam, but you should know what kind of information each major block provides:
- SDS focus What you look up MLA use case
- Identification Product name, recommended use, supplier Confirm you have the right chemical
- Hazard identification Signal word, pictograms, hazard statements Understand risk at a glance
- Composition Ingredients (as disclosed) Allergy/sensitizer awareness when provided
- First-aid measures Eye, skin, inhalation, ingestion steps Immediate response after exposure
- Fire-fighting measures Suitable extinguishing media, special hazards Fire involving flammable reagents
- Accidental release Spill containment and cleanup guidance Spill response planning
- Handling and storage Safe handling, incompatibilities Bench technique and shelf placement
- Exposure controls / PPE Gloves, eye protection, ventilation PPE selection
- Physical/chemical properties Appearance, odor, flash point (when given) Recognition and flammability clues
- Stability/reactivity Conditions to avoid, incompatible materials Storage compatibility
- Toxicological information Health effects overview Health hazard recognition
- Disposal considerations General disposal notes Still must follow facility waste SOP
- Transport / regulatory / other Shipping and regulatory notes Support staff/leadership mainly
Exam tip: If a question asks where to find PPE, first aid, or spill instructions for a product, the answer is typically the SDS (and the facility chemical hygiene/spill SOP that incorporates it).
GHS pictograms and labels
The Globally Harmonized System (GHS) standardizes hazard communication with:
- Pictograms (red-bordered diamonds with symbols)
- Signal words (Danger or Warning)
- Hazard and precautionary statements
Common laboratory-relevant pictogram concepts (recognize the hazard type):
- Hazard idea Typical meaning for lab workers
- Flame Flammable liquids/solids/gases
- Flame over circle Oxidizer—can intensify fire
- Corrosion Skin burns, eye damage, metal corrosion
- Skull and crossbones Acute toxicity
Health hazard Serious long-term or organ effects, carcinogenicity, etc.
Exclamation mark Irritant, skin sensitizer, acute toxicity (less severe), etc.
- Gas cylinder Gases under pressure
- Exploding bomb Explosives / self-reactives (less common on routine MLA benches)
- Environment Aquatic toxicity (may appear on some products)
You should be able to match a pictogram concept to a protection strategy (for example corrosion → eye protection and appropriate gloves; flame → ignition control and flammable storage).
Primary vs secondary container labeling
Primary container: manufacturer’s original bottle with full GHS label.
Secondary container: any bottle, spray bottle, or aliquot container you pour into for daily use.
Secondary container rules (MLA critical)
Secondary containers must be labeled so that any coworker knows what is inside and what the hazards are. Facility SOPs implement OSHA Hazard Communication requirements; typical minimum content includes:
- Product identity (name matching the SDS/common lab name)
- Hazard words/pictograms or equivalent facility-approved hazard information
- Often: date prepared, initials, concentration if diluted, expiration if applicable
Never:
- Leave “clear liquid” in an unlabeled wash bottle
- Reuse a food/drink container for chemicals
- Cover a label so the name and hazards cannot be read
- Assume “everyone knows that’s alcohol”
If you empty and reuse a bottle, remove or fully deface the old label and apply the correct new label.
Health hazard recognition
Health hazards appear as acute effects (burns, irritation, dizziness) or longer-term risks described on the SDS. Practical recognition cues:
Clue Possible concern First MLA action
Strong fumes / burning eyes Inhalation/irritant exposure Step back, alert others, increase ventilation per SOP, report
Splash to skin with pain/redness Corrosive or irritant contact Rinse immediately per first-aid SDS/SOP, remove contaminated PPE/clothing
Chemical in eye Ocular emergency Emergency eyewash for the required time; seek care; report
Headache/dizziness near solvents Inhalation exposure Leave area to fresh air per SOP; report; do not “tough it out”
Know the location of eyewash stations and safety showers in your work area and keep access clear.
PPE selection for chemicals
PPE is selected based on the task + SDS + SOP , not fashion or comfort alone.
- Situation Typical PPE considerations
- Handling alcohols/disinfectants Gloves compatible with the chemical, eye protection if splash risk
Pouring corrosives (if in your role) Chemical-resistant gloves, goggles/face protection, lab coat/apron as required
- Splash-prone cleaning Eye protection + gloves; sometimes gown/apron
- Unknown spill Do not improvise beyond training—escalate
Glove notes for MLAs:
Not all gloves resist all chemicals; latex/nitrile useful for many bio tasks may be wrong for certain solvents.
Change gloves when contaminated, torn, or after heavy chemical contact.
Remove gloves without contaminating skin; wash hands after removal.
Eye protection matters whenever splash is reasonably anticipated—including pouring, cleaning centrifuges with chemicals, and handling open reagent bottles at eye level.
Spill response basics
Spill response is role- and size-dependent . Many facilities distinguish:
- Small, known, trained-level spills the employee may handle with a spill kit
- Large, unknown, highly toxic, or multi-person-risk spills that require evacuation and specialized response
- General sequence (know the concept)
Protect people first — alert nearby staff; if inhalation risk is high, leave and call for help per SOP.
PPE up if you are trained and it is safe to remain.
Contain the spill (absorbent pads/dikes from the correct kit)—do not spread it with paper towels indiscriminately if the SOP specifies a kit.
Neutralize or absorb only as the spill procedure and chemical type allow (acids/bases may have specific neutralizers; do not mix random chemicals).
Collect waste into approved containers and label as hazardous waste if required.
Decontaminate surfaces and wash hands.
Report/document the incident—even “small” spills may require a log entry.
Do not:
- Use bare hands to wipe concentrated corrosives
- Toss chemical-soaked materials into regular trash if policy forbids it
- Combine spill residues with incompatible waste
- Stay in a poorly ventilated area with strong solvent vapors to “finish quickly”
- Never pour chemicals down the drain against policy
Sink disposal is one of the most common unsafe shortcuts. Unless a written procedure explicitly allows a specific dilute waste to go to the sanitary sewer (and local limits allow it), assume drain disposal is prohibited .
Why drain dumping is dangerous:
- Corrosives damage plumbing and create reactions in traps
- Flammables create sewer vapor hazards
- Toxic metals/solvents violate environmental law and facility permits
- Mixed wastes can generate heat, gas, or toxic byproducts
Use designated chemical waste containers , close them when not in use, and label contents. Ask the chemical hygiene officer or supervisor when unsure.
Storage incompatibilities (introduction)
Chemicals are stored by compatibility , not by alphabet alone. Introductory rules every MLA should respect:
- Keep separated (examples) Why
- Acids vs bases Violent neutralization / heat
- Oxidizers vs flammables/organics Fire/explosion intensification
- Flammable liquids in approved flammable cabinets Fire load control
- Water-reactives away from sinks/sprinklers per policy Dangerous reactions with water
- Volatile toxics in ventilated storage when required Inhalation control
Additional storage habits:
- Cap bottles tightly; wipe drips; use secondary containment trays when required
- Do not store chemicals above eye level if avoidable
- Do not store food with reagents
- Return stock bottles to labeled locations (FIFO still applies for dated reagents)
- Putting it together: MLA scenarios
- Scenario 1 — Unlabeled spray bottle
You find a spray bottle marked only “cleaner.” Do not use it. Take it out of service and report so it can be identified or disposed of safely.
Scenario 2 — Alcohol refill
You pour 70% isopropanol into a bench bottle. Label the secondary container with identity and hazards; store away from ignition sources; keep the flammable cabinet closed.
Scenario 3 — Small bleach splash on forearm
Rinse promptly with water per first-aid guidance, remove contaminated PPE, report if required, and seek occupational health evaluation per policy for significant exposures.
Scenario 4 — Coworker starts pouring stain waste into the sink
Stop the practice politely but firmly, cite policy, and escalate if needed. Environmental and safety compliance is everyone’s job.
- Exam focus checklist
- Locate and use SDS information for PPE, first aid, spill, and storage
- Recognize major GHS pictogram hazard meanings
- Label secondary containers completely
- Select PPE based on chemical risk, not habit alone
- Follow spill and waste rules; no unauthorized drain disposal
- Store by compatibility and use flammable cabinets when required
Chemical safety pairs with fire safety (next section) and infection-control PPE content in later Domain IV chapters. Practice application with ASCP MLA questions .