Study guide
17.4 Instrumentation
Specialist in Blood Banking, SBB ASCP
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility Routes & Credential Maintenance 1.3 Study Strategy for SBB
2 Donors & Collection
2.1 Donor Qualification 2.2 Collection Methods & Adverse Reactions 2.3 Special Donations
3 Processing, Storage & Component QC
3.1 Processing, Testing & Labeling 3.2 Storage, Transport & Expiration 3.3 Blood Component Quality Control
4 Red Cell & Modified Components
4.1 Whole Blood & Red Blood Cells 4.2 Leukocyte-Reduced, Washed, Frozen & Rejuvenated RBCs 4.3 Irradiated Components 4.4 Granulocytes
5 Platelets, Plasma & Cellular Products
5.1 Platelets 5.2 Plasma & Cryoprecipitated AHF 5.3 Apheresis Products & Fractionation Products 5.4 Hematopoietic Progenitors
6 Genetics, ABO & Rh
6.1 Blood Group Genetics & Molecular Inheritance 6.2 ABO & Lewis Systems 6.3 Rh System 6.4 MNS, P1PK/Globoside & Ii
7 Other Blood Groups & Role in Transfusion
7.1 Kell, Kidd, Duffy & Lutheran 7.2 Other Systems & High/Low-Prevalence Antigens 7.3 HLA, Platelet-Specific & Granulocyte Antigens 7.4 Immunogenicity & Antigen Prevalence
8 Immunology Foundations
8.1 Immune Response 8.2 Immunoglobulins 8.3 Antigen-Antibody Interactions 8.4 Complement
9 Physiology, Hemostasis & HDFN
9.1 Physiology of Blood 9.2 Hemostasis and Coagulation 9.3 HDFN Pathophysiology & Detection 9.4 HDFN Treatment & Prevention
10 Cytopenias & Transplantation
10.1 Immune & Nonimmune Anemia 10.2 Thrombocytopenia & Neutropenia 10.3 Solid Organ Transplantation Support 10.4 Hematopoietic Progenitor Cell Transplantation
11 Routine Serologic Testing
11.1 Blood Grouping Tests 11.2 Antibody Detection & Crossmatch 11.3 Antibody Identification & Clinical Significance 11.4 Direct Antiglobulin Testing & Reagents
12 Special Serologic Methods
12.1 Enzymes, Enhancement Media & Lectins 12.2 Adsorptions, Elutions & Titrations 12.3 Cell Separations, Neutralization & Thiol Reagents 12.4 Chloroquine Diphosphate & EDTA-Glycine Acid
13 Molecular Platforms & Serologic QA
13.1 Molecular Blood Group Techniques 13.2 ELISA, Immunofluorescence, Solid Phase & Column Agglutination 13.3 Serologic Quality Assurance
14 Indications, Component Therapy & PBM
14.1 Indications for Transfusion 14.2 Component Therapy 14.3 Blood Administration & Patient Blood Management
15 Adverse Effects of Transfusion
15.1 Immunologic Transfusion Reactions 15.2 Nonimmunologic Reactions 15.3 Transfusion-Transmitted Diseases
16 Apheresis & Extracorporeal Circulation
16.1 Therapeutic Apheresis 16.2 Extracorporeal Circulation
17 Quality, Safety, Math & Instrumentation
17.1 Quality Assessment & Troubleshooting 17.2 Laboratory Safety 17.3 Laboratory Mathematics 17.4 Instrumentation
18 Laboratory Administration (SBB Only)
18.1 Financial Management 18.2 Operations & Information Technology 18.3 Personnel, Education & Training 18.4 Quality Management, Risk & Tissue Management
17.4 Instrumentation
Key Takeaways Explain This Topic AI
Routine microscopic reading of agglutination is discouraged because it increases false positives from rouleaux; microscopy is reserved for elutions, mixed-field detection, and select confirmatory uses.
Serologic centrifuges are calibrated for time and relative centrifugal force per technique; under-spinning causes false-negative or weak reactions, and over-spinning can cause false-positive button resuspension.
Automated cell washers must adequately remove unbound globulins before AHG reagent is added; check cells on every negative antiglobulin test verify adequate washing and reagent reactivity.
Blood irradiators deliver a minimum of 25 Gy to the canister center (15 Gy minimum at any point); irradiated RBCs expire 28 days after irradiation or on the original expiration date, whichever comes first.
Automated gel and solid-phase testing platforms require a validated method-comparison study against the reference method before replacing tube testing, since instrument-specific interpretation criteria differ from visual grading.
Last updated: July 2026
Manual Instrumentation: Microscope And Centrifuge
Although blood banking has automated heavily, the SBB exam still expects command of manual bench instruments and why their calibration matters.
The microscope has a narrow, specific role in blood bank serology today. AABB Standards and most standard operating procedures discourage routine microscopic reading of agglutination because it increases false-positive results from rouleaux, fibrin strands, and nonspecific clumping that would not be interpreted as positive macroscopically. Microscopic examination is reserved for specific, defined situations: reading an elution (antibody recovered from red cells, where reactions are often weak), assessing a mixed-field pattern (two red cell populations, classically seen after a recent transfusion of ABO-incompatible-appearing cells, in an ABO chimera, or in a recently transplanted marrow recipient), and historically for weak D microscopic confirmation in tube testing, a practice largely phased out in favor of gel and solid-phase methods but still testable as content. A stem describing routine microscopic upgrading of a negative antibody screen to positive is testing whether you recognize this practice as discouraged , not as a best practice.
The serologic centrifuge is calibrated for a defined combination of time and relative centrifugal force (RCF) for each specific technique — immediate-spin ABO/Rh typing, antibody screening and crossmatch tube tests, and washing steps all have their own validated spin parameters. Centrifuges are periodically verified with a tachometer to confirm actual RPM matches the dial or display, and by testing known weak-reacting antisera to confirm sensitivity is maintained. Under-spinning produces false-negative or falsely weak reactions because red cells are not adequately packed to show agglutination; over-spinning can produce false-positive reactions by packing cells so tightly that they resuspend as a button that looks like agglutination, or can physically damage the cells. Any newly acquired centrifuge, or one returning from repair, requires revalidation of its spin parameters against a reference method before it is used for patient testing — a frequent quality-systems tie-in on this exam.
Cell Washers, Irradiators, And Automated Testing Platforms
The automated cell washer performs the same function a technologist would do manually before adding antihuman globulin (AHG) reagent: it dispenses saline, centrifuges, and decants the supernatant through multiple wash cycles to remove unbound serum globulins from the red cell button. This step is essential because unremoved globulins will neutralize the AHG reagent, producing a false-negative antiglobulin test that could miss a clinically significant antibody in a crossmatch. Because a cell-washer malfunction is a patient-safety-critical failure mode, its adequacy is verified the same way manual washing is verified: by adding check cells to every negative AHG result and confirming a positive reaction. A cell washer that dispenses insufficient saline, has a clogged line, or under-centrifuges will eventually show up as a check-cell failure, and any washer malfunction found retroactively requires review of prior patient results run on that instrument.
Blood irradiators prevent transfusion-associated graft-versus-host disease (TA-GVHD) by inactivating donor lymphocytes in cellular components (red cells, platelets, granulocytes) before transfusion to immunocompromised or otherwise at-risk recipients, such as intrauterine transfusion recipients, directed donations from blood relatives, HLA-matched platelet recipients, patients with congenital immunodeficiency, and marrow or HPC transplant recipients. Two technologies are used:
Type Source Key considerations
Gamma irradiator Sealed cesium-137 or cobalt-60 source NRC/agreement-state licensing, source decay requires periodic recalculation of exposure time, dosimetry badges, physical security
X-ray irradiator Electrically generated X-rays No sealed radioactive source or associated licensing/security burden; dose rate does not decay over the source's lifetime
Regardless of source type, the minimum dose delivered to the center of the canister is 25 Gy (2500 cGy) , with a minimum of 15 Gy delivered to any point within the component, and dose delivery is periodically verified with dosimeters (for example, alanine pellets or radiochromic film) mapped across the canister, since uneven irradiator geometry can under-dose the edges of a load. Every irradiated unit carries a color-change irradiation indicator label confirming exposure. Irradiation shortens red cell shelf life because it accelerates potassium leakage and membrane damage , so an irradiated RBC unit expires 28 days after irradiation or on the original expiration date, whichever comes first — a frequently tested numeric fact. Irradiation does not inactivate infectious agents and does not replace leukoreduction, which serves a different purpose: reducing febrile reactions, HLA alloimmunization, and CMV transmission risk.
Automated testing platforms — gel column (glass bead) agglutination systems, solid-phase red cell adherence systems, and walk-away analyzers that combine pipetting, incubation, centrifugation, and optical reading — now perform most routine ABO/Rh typing, antibody screening, and even crossmatching in higher-volume blood banks. Before converting from tube testing, a laboratory must perform a method comparison and validation study against the existing reference method across the expected range of reactivity (strong positives, weak positives, and negatives) and establish instrument-specific interpretation criteria , since automated platforms may flag results as "positive," "negative," "indeterminate," or "no result" using proprietary optical-density or pattern-recognition thresholds rather than a technologist's visual grading. Advantages include standardized reading that removes interobserver variability in grading agglutination strength, reduced hands-on time, and electronic interfacing with the blood bank information system for positive specimen and result tracking. The tradeoff is that a software or hardware malfunction can silently produce indeterminate or discrepant results across an entire run , which is why ongoing instrument QC, maintenance logs, and technologist review of flagged results remain required even on a fully automated platform.