Study guide
ASE A3 study guide
Read a lesson, then practice the ideas you want to remember.
Lessons
- Clutch Disc, Pressure Plate, Release Bearing
- Clutch Operation, Linkages, Cable Systems, a
- Flywheel Measurement, Dual-Mass Flywheel Ser
- Hydraulic Clutch Systems, Concentric Slave C
- Semi-Floating, Full-Floating Axles, Bearings
- Backlash, Carrier Preload, Limited-Slip Diff
- Drive Axle Noise Isolation, Housing Inspecti
- Pinion Depth, Bearing Preload, and Contact P
- Fixed and Plunging CV Joints, Boots, Dampers
- Driveline Working Angles, Phasing, and Cente
- Driveshaft Balance, Runout, Cardan U-Joint D
- 4WD vs. AWD Operating Principles, Driveline
- Locking Hubs, Center Axle Disconnect, and AW
- Transfer Case Planetary Gears, Drive Chains,
- Shift Actuators, Electronic Shift-on-the-Fly
- Content Areas, Task List, and Study Strategy
- Exam Facts, Requirements, and Logistics
- Differential Bearing Preload Adjustment, Shi
- Transaxle Architecture, Power Flow, Shifter
- Final Drive Pinion/Ring Gears, Transaxle Dif
- Output Axle Seals, Case Vents, Stub Shafts,
- Shift Rails, Shift Forks, Detents, and Inter
- Synchronizer Operation, Wear Measurement, an
- Transmission Disassembly, Shaft End Play, Be
- Transmission Architecture, Power Flow, Gear