Study guide

5.2 Automatic Transmission & Transaxle Parts

ASE P2 Automobile Parts Specialist Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & ASE P2 Overview

1.1 ASE P2 Exam Overview, Structure & Logistics 1.2 How to Study for ASE P2 & Navigate This Guide

2 Chapter 2: General Operations & Store Practices

2.1 Sales Documentation, Work Orders & Internal Shop Charges 2.2 Special Orders, Will-Call Tagging & Hold Procedures 2.3 Warranty Claim Paperwork & Core Return Management 2.4 Customer Returns Policy & Non-Returnable Electrical Components 2.5 Freight Receiving, Damage Claims, Hazmat Handling & Lost Sales

3 Chapter 3: Customer Relations, Communication & Sales Skills

Section 3.1: Needs Identification & Application Verification Section 3.2: Professional Counter Service & Multi-Customer Management Section 3.3: Phone Order Etiquette & Wholesale Account Management Section 3.4: Consultative Selling & Good-Better-Best Product Tiers Section 3.5: Customer Complaint De-escalation & Related-Parts Upselling

4 Chapter 4: Vehicle Systems Knowledge — Engine, Cooling & Fuel Systems

4.1 Engine Mechanical Components, Bearings & Gaskets 4.2 Cooling System Components, Radiators & Serpentine Belts 4.3 Fuel Delivery Systems, Pumps, Filters & Injectors 4.4 Ignition System Components, Coils & Spark Plugs 4.5 Exhaust Components & Emissions Control Systems

5 Chapter 5: Vehicle Systems Knowledge — Transmission, Drivetrain & Brakes

5.1 Manual Transmission, Clutch & Transfer Case Components 5.2 Automatic Transmission & Transaxle Parts 5.3 Driveshafts, Constant Velocity (CV) Axles & Differentials 5.4 Hydraulic Brake Components, Calipers, Pads & Rotors 5.5 Anti-Lock Brake (ABS) Sensors, Master Cylinders & Brake Hardware

6 Chapter 6: Vehicle Systems Knowledge — Electrical, HVAC & Chassis

6.1 Steering Linkage, Power Steering Pumps & Rack-and-Pinion Gears 6.2 Suspension Components, Shocks, Struts & Springs 6.3 Heating, Ventilation & AC (HVAC) System Components 6.4 Batteries, Starters & Alternators (Charging/Starting) 6.5 Automotive Wiring, Fuses, Relays, Bulbs & Electronic Modules 6.6 Miscellaneous Parts: Fasteners, Fittings, Hose, Chemicals & Accessories

7 Chapter 7: Vehicle Identification & Build Codes

7.1 17-Character VIN Structure & Decoding Principles 7.2 Model Year Position (Position 10) & Vehicle Descriptor Section 7.3 Regular Production Option (RPO) & Factory Build Codes

8 Chapter 8: Inventory Management & Retail Merchandising

8.1 Navigating Electronic & Printed Catalog Systems 8.2 Supersession, Cross-Referencing & Part Interchange 8.3 Perpetual Inventory & Cycle Counting Procedures 8.4 Stocking Levels, Min/Max Controls & Inventory Turnover 8.5 Retail Merchandising, Planograms & Point-of-Purchase Displays

5.2 Automatic Transmission & Transaxle Parts

Key Takeaways Explain This Topic AI

The torque converter acts as a fluid coupling between the engine and transmission, utilizing an impeller, turbine, stator with one-way clutch, and a lockup clutch (TCC).

Planetary gear sets produce varying gear ratios, reverse, and direct drive through selective application of multi-plate wet clutch packs, brake bands, and sprag clutches.

Electronic valve bodies route pressurized fluid using pulse-width modulated (PWM) shift solenoids, line pressure solenoids, and speed sensors monitored by the TCM.

Modern automatic transmissions require strict fluid compliance (e.g., Dexron VI, Mercon LV, ATF+4, CVT NS-3); using incorrect fluid causes friction material degradation and shift shudder.

Last updated: July 2026

  • Automatic Transmission & Transaxle Parts
  • Torque Converter Assembly & Hydraulic Fluid Coupling

An automatic transmission or transaxle relies on a hydrodynamic fluid coupling known as the Torque Converter to transfer engine torque to the transmission input shaft without a mechanical foot clutch.

Internal Components of the Torque Converter

The torque converter housing is bolted directly to the engine flexplate (drive plate) and rotates at engine speed. Inside the sealed steel assembly are four primary components:

Impeller (Pump): The outer rear housing containing curved radial fins. As the engine rotates, centrifugal force throws automatic transmission fluid (ATF) outward toward the turbine.

Turbine: Splined directly to the transmission input shaft. The high-velocity fluid thrown from the impeller strikes the turbine blades, causing the turbine—and input shaft—to rotate.

Stator: Positioned between the impeller and turbine. Contains a one-way overrunning clutch (sprag or roller clutch). When fluid leaves the turbine, it travels in a direction that opposes impeller rotation. The stator redirects this returning fluid back into the impeller in the direction of engine rotation, creating torque multiplication (up to 2.1:1 ratio) during acceleration from a stop. As vehicle speed matches engine speed (coupling phase), the stator overruns and freewheels.

Torque Converter Clutch (TCC): A hydraulically applied internal friction disc that mechanically locks the turbine to the converter cover at highway speeds. TCC engagement eliminates fluid slip, improving fuel economy and lowering ATF temperatures.

Flexplate and Torque Converter Counter Specialist Knowledge

The Flexplate connects the engine crankshaft to the torque converter. It is a thin stamped-steel disk with a welded outer ring gear for starter engagement. Parts specialists must check flexplates for stress cracks around the crankshaft bolt circle, elongated torque converter mounting holes, or ring gear tooth damage. When supplying a replacement torque converter, specialists must advise technicians to verify converter hub depth and fully seat the converter drive notches into the transmission fluid pump gears prior to bellhousing bolt installation to prevent catastrophic pump destruction.

Planetary Gear Sets, Friction Elements & Hydraulic Actuation

Automatic transmissions achieve multiple forward gear ratios and reverse using compound Planetary Gear Sets controlled by friction and holding devices.

Planetary Gear Mechanics

A simple planetary gear set consists of three primary elements:

Sun Gear: The central gear.

Planet Pinion Gears & Carrier: Multiple small gears mesh with the sun gear, supported by a rotating carrier frame.

Ring Gear (Annulus): The outer internal-toothed ring encircling the pinions.

By holding one element stationary (via a brake band or clutch pack) and driving another element, the third element provides output at reduced speed (underdrive), increased speed (overdrive), or reverse direction.

Holding and Driving Devices

Multi-Plate Wet Clutch Packs: Alternating friction discs (steel plates faced with paper/graphite friction material) and steel separator plates housed inside a drum. Hydraulic pressure applied against a ring piston compresses the pack, locking two rotating shafts together.

Brake Bands: Flexible steel bands lined with friction material wrapped around the outside of a clutch drum. A hydraulic servo piston tightens the band to hold the drum stationary against the transmission case.

One-Way (Sprag/Roller) Clutches: Mechanical holding devices that hold a gear element in one direction of rotation while allowing freewheeling in the opposite direction, enabling smooth gear transitions without timing hydraulic releases.

Hydraulic Controls, Valve Body & Solenoids

The hydraulic system is the brain and muscle of the automatic transmission.

Transmission Fluid Pump & Pressure Regulation

Driven directly by the torque converter hub, the internal gear or vane pump generates line pressure (ranging from 60 PSI at idle up to 300+ PSI under heavy load). Line pressure is regulated by a pressure regulator valve controlled by a Line Pressure Control Solenoid (Electronic Pressure Control - EPC).

Valve Body Assembly & Solenoid Controls

The Valve Body contains a labyrinth of cast hydraulic passages, spring-loaded spool valves, check balls, and separator plates.

Shift Solenoids: Electro-hydraulic actuators operated by the Transmission Control Module (TCM). They open or close hydraulic circuits to direct fluid to specific clutch packs or band servos. Solenoids operate as simple ON/OFF valves or Pulse-Width Modulated (PWM) duty-cycle valves for smooth engagement.

Sensors: The TCM monitors Input Shaft Speed (ISS) and Output Shaft Speed (OSS) sensors to calculate gear ratio slip and shift timing. The Transmission Fluid Temperature (TFT) sensor alters shift strategies during cold warm-up or high-heat conditions.

ATF Specification Base Fluid / Type Primary Application Scope Key Chemical Features

Dexron VI Full Synthetic / Low Viscosity GM 6-speed/8-speed/10-speed automatics High shear stability, extended drain intervals

Mercon LV / ULEV Synthetic Low / Ultra-Low Viscosity Ford 6R80, 10R80 automatics Low temperature fluidity, anti-shudder friction

ATF+4 Synthetic Group III Chrysler / Dodge / Jeep automatics High shear stability, specific anti-shudder additives

Multi-Vehicle Synthetic Synthetic Blend / Full Synthetic Broad aftermarket replacement Balanced friction coefficient for diverse clutches

CVT Fluid (NS-2 / NS-3) Non-DHP Specialized Synthetic Push-belt Continuously Variable Transmissions High steel-on-steel friction, anti-foaming agents

DCT Fluid (DCTF) Synthetic Dual-Clutch Fluid Wet/Dry Dual-Clutch Transmissions High thermal stability, synchronizer protection

Maintenance, Filtration & Fluid Requirements

Automatic Transmission Fluid (ATF) performs four vital functions: power transmission in the torque converter, hydraulic control, friction modulation for clutches, and component lubrication/cooling.

Fluid Compatibility & Filter Replacement

Using non-specified ATF alters friction coefficient characteristics, leading to clutch slippage, shift shudder, or seal degradation. Modern low-viscosity fluids (e.g., Dexron VI, Mercon LV) cannot be substituted with older high-viscosity formulations like Dexron III/Mercon.

Filters & Gaskets: Transmission service kits include a pan gasket (reusable steel-core elastomeric or high-grade rubber) and a suction filter (felt medium or fine mesh screen). Parts specialists must remind technicians to clean magnet pads inside the oil pan to capture ferrous wear particles and to inspect cooler lines for restriction. When replacing a failed transmission, flushing the auxiliary fluid cooler with approved solvent or installing a new cooler is essential to prevent trapped metal debris from destroying the replacement unit.