Study guide
1.1 ASE T7 Exam Format, Task List & Question Strategy
ASE T7 HVAC Medium/Heavy Truck
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview, Safety & Complaint Verification
1.1 ASE T7 Exam Format, Task List & Question Strategy 1.2 Shop Safety, PPE & Identifying the Truck's Power Source 1.3 Verifying the Complaint: Interview, Records, TSBs, Noises & Sensory Checks
2 Chapter 2: HVAC Performance Testing, Gauges & Leak Detection
2.1 Systematic HVAC Performance Testing & Diagnostic Methodology 2.2 Manifold Gauge Pressure Analysis & Diagnostic Logic 2.3 Superheat and Subcooling Analysis in Commercial Trucks 2.4 Refrigerant Leak Detection, Purity & Identification
3 Chapter 3: Refrigerant Management, Recovery, Oil & Charging
3.1 Environmental Regulations, Safety & Refrigerant Properties (R-134a & R-1234yf) 3.2 Refrigerant Recovery, Recycling & Deep Evacuation 3.3 Refrigerant Storage, Recovery-Cylinder Air Checks & Service Equipment Care 3.4 Compressor Lubricants (PAG vs. POE), System Flushing & Cleanliness 3.5 Accurate System Charging, Charge by Weight & Field Pitfalls
4 Chapter 4: Compressors, Drives, Clutches & Protection Devices
4.1 Heavy-Duty Truck Compressor Types & Operating Principles 4.2 Compressor Mountings, Drive Belts, Pulleys, Tensioners & Idlers 4.3 Magnetic Clutch Diagnosis, Air Gap Adjustment & Electrical Circuits 4.4 Compressor Failure Analysis, Protection Devices & System Cleanup
5 Chapter 5: Heat Exchangers, Metering, Storage & Refrigerant Lines
5.1 Condensers, Ram Airflow & Fan Clutch Operation 5.2 Evaporator Cores, Moisture Drainage & Freeze-Up Controls 5.3 Metering Devices: Thermal Expansion Valves (TXV) & Fixed Orifice Tubes 5.4 Refrigerant Storage & Desiccant: Receiver-Driers vs. Accumulators 5.5 Refrigerant Hoses, Lines, Fittings, Service Ports & Seals
6 Chapter 6: Engine Cooling Systems, Fans & Airflow Devices
6.1 Diesel Engine Cooling System Integration & Thermal Management 6.2 Cooling System Tests, Radiators, Hoses & Clamps, Coolant Pumps, Flush & Refill 6.3 Engine Cooling Fans, Shrouds, Grille Shutters & Electric Condenser Fans
7 Chapter 7: Cab & Sleeper Heating, Temperature Control & Window Fogging
7.1 Heater Core Diagnostics, Clogging & Integrity Testing 7.2 Coolant Flow Control: Valves, Auxiliary Pumps & Sleeper Lines 7.3 Diagnosing Outlet Air Temperature Problems & Window Fogging
8 Chapter 8: Air Distribution, Actuators & Blower Systems
8.1 Plenum Air Doors: Blend, Mode & Recirculation Control 8.2 Air-Operated (Pneumatic) HVAC Controls & Actuators 8.3 Blower Motors, Speed Resistors & Pulse-Width Modulated Modules 8.4 Duct Systems, Cabin Air Filtration & Airflow Diagnostics
9 Chapter 9: Electronic Controls, Networks, Sleeper Systems & APUs
9.1 Electronic Automatic Temperature Control (EATC) & Sensor Operations 9.2 HVAC Control System Types, Control Panels, DTCs & Module Configuration 9.3 Wiring Schematics, Clutch Relays & J1939 CAN Bus Diagnosis 9.4 Sleeper Cab Climate Systems & Auxiliary Power Unit (APU) Integration
1.1 ASE T7 Exam Format, Task List & Question Strategy
Key Takeaways Explain This Topic AI
The ASE T7 certification test has 50 questions, 40 of them scored, and a 60-minute time limit; the 10 unscored research questions are not identified.
T7 content areas carry 6, 20, 6, and 8 scored questions: HVAC diagnosis (15%), A/C system and components (50%), heating and engine cooling (15%), and operating systems and controls (20%).
The T7 task list has 56 tasks, and every test question maps to one or more of them, although any single test form may skip some tasks.
ASE's T7 recertification test is 20 questions in 30 minutes, and ASE certifications are valid for five years.
Passing ASE T7 does not satisfy EPA Section 609; technicians who service vehicle A/C for pay also need Section 609 certification.
Last updated: September 2026
What the ASE T7 Test Covers
ASE T7 Heating, Ventilation, and Air Conditioning (HVAC) Systems is part of ASE's Medium/Heavy Truck series (T1–T8). It measures whether a working technician can diagnose and repair truck and tractor climate systems: refrigerant circuits, compressors and clutches, heat exchangers, cab and sleeper heating, engine cooling as it affects heat, and the electrical, air, and electronic controls that tie them together. T7 is one of the tests required for ASE Certified Master Medium/Heavy Truck Technician status, together with T2, T3, T4, T5, T6, and T8.
ASE's 2026 Medium/Heavy Truck study guide publishes the official test specification. Four content areas are weighted by scored questions:
Content Area Scored Questions Share Tasks Where This Guide Teaches It
A. HVAC Systems Diagnosis, Service, and Repair 6 15% 6 Chapters 1–2 (control-system identification in Chapter 9)
B. A/C System and Component Diagnosis, Service, and Repair (General; Compressor and Clutch; Evaporator, Condenser, and Related Components) 20 50% 27 Chapters 2–5
C. Heating and Engine Cooling Systems Diagnosis, Service, and Repair 6 15% 11 Chapters 6–7
D. Operating Systems and Related Controls Diagnosis and Repair 8 20% 12 Chapters 8–9 (electric cooling and condenser fans in Chapter 6)
Total 40 100% 56
Area B is half the scored test, so refrigerant handling, gauge diagnosis, compressor service, and component replacement deserve the most study time. The heating and controls areas are smaller, but their questions are often the hardest to reason through, because they combine coolant flow, air doors, and electrical inputs.
Test Logistics
- Item ASE T7 Certification Test ASE T7 Recertification Test
- Questions 50 total, 40 scored 20
- Time 60 minutes 30 minutes
- Where Computer-based at a Prometric test center Test center or remote online proctoring
Eligibility Anyone may test; certification also needs work experience Must have passed the T7 certification test once
Key rules from ASE's current registration and test-center policies:
You buy tests through a myASE account. ASE charges a registration fee per order plus a fee for each test; check ASE's registration page for current amounts.
After purchase you have 90 days to schedule and take the test, at any of roughly 500 Prometric centers in the United States and Canada.
After receiving a pass or fail result, you must wait 30 full days before buying and taking the same test again.
Certification is valid for five years , after which you take the recertification test.
ASE tests include a pop-up English-to-Spanish glossary.
To become certified after passing, you must document two years of relevant hands-on work experience. Relevant formal training can substitute for part of it. You can test before the experience is approved, but the certificate waits for ASE's review.
ASE reports pass or fail and does not publish a fixed passing percentage, so the only safe target is mastery of every task.
ASE T7 and EPA Section 609 Are Different Credentials
ASE states plainly that its HVAC certifications (A7, T7, H7, and S7) do not satisfy EPA's Section 609 refrigerant-management requirement. Anyone who repairs or services motor vehicle A/C for consideration must be certified through an EPA-approved Section 609 program. ASE runs one of these programs, the Refrigerant Recovery and Recycling Review and Quiz, online or in print. Expect T7 questions that assume you already follow Section 609 practice: recovering instead of venting, using SAE-certified equipment, and identifying refrigerant before connecting a machine.
Question Types You Will See
ASE's published T7 sample questions show the formats:
Direct questions: "A system has low discharge pressure. Which of these could be the cause?" Read for the single best answer.
Technician A / Technician B: Two statements, and you choose A only, B only, both, or neither. Judge each statement independently as if the other did not exist, then combine the results. A statement is correct if it could be a cause, even when it is not the most common one.
EXCEPT questions: "Any of these could be the cause EXCEPT." Three options are plausible causes and one is not. ASE flags these with a note, and it is easy to answer the opposite question by mistake.
"Most likely" questions: Several options may be possible. Pick the one best supported by all the evidence given, such as pressures, temperatures, and when the symptom happens.
A worked example of evidence-based elimination
One published sample describes a system that "blows cool, but not cold" with 250 psi high side and 50 psi low side, asking for the cause EXCEPT. A high low side and high high side point to heat not leaving the condenser or too much oil or refrigerant. An inoperative fan, a missing shroud, and an oil overcharge all fit. A partially restricted expansion valve would lower the low side, so it is the exception. The skill being tested is reading two gauges together, which Chapters 2–5 drill repeatedly.
Pacing and Study Plan
At 60 minutes for 50 questions you have about 72 seconds per question . Flag long calculation or Tech A/B items, answer everything (unanswered questions score as wrong), and return to flagged items at the end.
A practical plan is to study Area B first (gauges, recovery and charging, compressors and clutches, and each component), then the controls chapters, then heating and cooling. Finish with mixed practice so you get used to switching between refrigerant, coolant, and electrical reasoning the way the real test does.