Study guide

4.2 Specific Gamma-Ray Constants & Exposure Rate Calculations

ASNT Industrial Radiography Radiation Safety Personnel IRRSP

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Radiation Physics & Radioactive Decay

1.1 Atomic Structure, Radioactivity & Decay Modes 1.2 Radioactive Decay Kinetics & Half-Life Calculations 1.3 Primary Industrial Radiography Isotopes (Ir-192, Co-60, Se-75, Cs-137) 1.4 Industrial X-Ray Production & Machine Sources

2 Chapter 2: Radiation Interactions & Biological Effects

2.1 Photon Interaction Mechanisms with Matter 2.2 Radiation Measurement Units & Quantities 2.3 Cellular & Molecular Radiobiology 2.4 Biological Effects & Acute Radiation Syndrome

3 Chapter 3: Radiation Protection Standards & Dose Limits

3.1 Occupational Dose Limits under 10 CFR Part 20 3.2 Public Dose Limits & Special Protected Groups 3.3 The ALARA Philosophy & Radiation Safety Principles

4 Chapter 4: ALARA Calculations & Shielding Math

4.1 Inverse-Square Law & Time-Distance Calculations 4.2 Specific Gamma-Ray Constants & Exposure Rate Calculations 4.3 Shielding Mathematics: Half-Value Layers (HVL) & Tenth-Value Layers (TVL) 4.4 Restricted Area & Boundary Calculations

5 Chapter 5: Radiation Detection & Personnel Monitoring

5.1 Radiation Survey Meters: Ion Chambers, Proportional Counters & GM Detectors 5.2 Survey Meter Calibration & Daily Operational Checks 5.3 Personnel Monitoring Equipment & Alarming Rate Meters

6 Chapter 6: Radiographic Exposure Equipment & Operating Mechanics

6.1 Gamma Exposure Devices & Camera Operation 6.2 Drive Cables, Crank Mechanisms & Source Guide Tubes 6.3 Beam Collimators, Source Changers & Leak Testing 6.4 Industrial X-Ray Systems & Facility Equipment

7 Chapter 7: Operational Safety & Field Radiography Procedures

7.1 Two-Person Crew Requirements & Operational Roles 7.2 Mandatory Radiographic Surveys & Verification Protocols 7.3 Perimeter Postings, Boundary Controls & Direct Surveillance 7.4 Permanent Radiographic Installations & Shielded Enclosures

8 Chapter 8: Radiation Emergencies & Source Recovery

8.1 Radiographic Emergency Classification & Immediate Actions 8.2 Source Recovery Principles & Mitigation Techniques 8.3 Regulatory Incident Notification & Reporting

9 Chapter 9: Regulatory Compliance & Transportation

9.1 Federal & Agreement State Regulations, Licensing & Radiation Safety Programs 9.2 DOT HAZMAT Classification, Packaging & Testing 9.3 DOT Labeling, Placarding, Shipping Papers & Emergency Response Info

4.2 Specific Gamma-Ray Constants & Exposure Rate Calculations

Key Takeaways Explain This Topic AI

The Specific Gamma-Ray Constant (Γ) defines the unshielded exposure rate in Roentgens per hour produced by a 1-Curie point source at a reference distance of 1 foot (R·ft²/(Ci·hr)) or 1 meter (R·m²/(Ci·hr)).

Standard published Γ constants are: Iridium-192 (5.2 R·ft²/(Ci·hr) or 0.48 R·m²/(Ci·hr)); Cobalt-60 (14.0 R·ft²/(Ci·hr) or 1.30 R·m²/(Ci·hr)); Selenium-75 (2.2 R·ft²/(Ci·hr) or 0.203 R·m²/(Ci·hr)); and Cesium-137 (3.4 R·ft²/(Ci·hr) or 0.32 R·m²/(Ci·hr)).

Unshielded field exposure rates are calculated using I = (Γ · A) / d², where activity (A) is in Curies and distance (d) matches the unit dimension of the selected gamma constant.

Cobalt-60 yields nearly 2.7 times the exposure rate of Iridium-192 per Curie due to high-energy cascade gammas (1.17 and 1.33 MeV), requiring significantly larger standoff perimeters and heavier shielding.

Combining radioactive decay kinetics with gamma constant calculations enables radiographers to project future field exposure rates and anticipate safe working distances as source activity declines over successive half-lives.

Last updated: September 2026

4.2 Specific Gamma-Ray Constants & Exposure Rate Calculations

Quick Summary: Before initiating radiographic exposures, radiographers must mathematically predict the radiation intensity emitted by unshielded radioactive sources. The Specific Gamma-Ray Constant (symbolized by Γ \Gamma Γ , uppercase Greek Gamma) quantifies the unshielded exposure rate produced by a 1-Curie source at a unit distance. By combining Γ \Gamma Γ with source activity ( A A A ) and the Inverse-Square Law, radiographers compute expected exposure rates at any field distance using the formula I = Γ ⋅ A d 2 I = \frac{\Gamma \cdot A}{d^2} I = d 2 Γ ⋅ A ​ .

Definition and Physical Basis of the Specific Gamma-Ray Constant ( Γ \Gamma Γ )

The Specific Gamma-Ray Constant (also termed the Gamma factor or exposure rate constant ) is an intrinsic physical property of each gamma-emitting radioisotope. It is defined with scientific precision as:

Specific Gamma-Ray Constant ( Γ \Gamma Γ ): The exposure rate in Roentgens per hour ( R/hr \text{R/hr} R/hr ) generated by an unshielded, point-source quantity of one Curie ( 1 Ci 1\text{ Ci} 1 Ci ) of a radioactive nuclide at a reference distance of one unit length (one foot or one meter).

Physical Derivation

The magnitude of Γ \Gamma Γ depends on three nuclear and atomic properties unique to each isotope:

Gamma Transition Energies ( E i E_i E i ​ ): The discrete energies (in MeV) of the gamma photons released during nuclear de-excitation.

Yield per Disintegration ( f i f_i f i ​ ): The fractional probability that a specific gamma ray is emitted per nuclear transformation (some decays yield multiple cascade photons; others undergo internal conversion).

Mass Energy-Absorption Coefficient of Air ( ( μ en / ρ ) air (\mu_{\text{en}}/\rho)_{\text{air}} ( μ en ​ / ρ ) air ​ ): The probability that photons of energy E i E_i E i ​ will interact with and deposit kinetic energy into electrons in standard dry air at standard temperature and pressure (STP).

Mathematically, Γ \Gamma Γ is derived from the sum of all emitted photon energies weighted by their air absorption coefficients: Γ = 19.3 ∑ i f i ⋅ E i ⋅ ( μ en ρ ) air , i [ R ⋅ m 2 Ci ⋅ hr ] \Gamma = 19.3 \sum_i f_i \cdot E_i \cdot \left(\frac{\mu_{\text{en}}}{\rho}\right)_{\text{air}, i} \quad \left[\frac{\text{R}\cdot\text{m}^2}{\text{Ci}\cdot\text{hr}}\right] Γ = 19.3 i ∑ ​ f i ​ ⋅ E i ​ ⋅ ( ρ μ en ​ ​ ) air , i ​ [ Ci ⋅ hr R ⋅ m 2 ​ ]

Because Roentgens strictly measure ionization in air ( 1 R = 2.58 × 10 − 4 C/kg of dry air 1\text{ R} = 2.58 \times 10^{-4}\text{ C/kg of dry air} 1 R = 2.58 × 1 0 − 4 C/kg of dry air ), Γ \Gamma Γ provides an immediate dosimetric link between nuclear decay rate (Curies) and field radiation intensity (Roentgens per hour).

Published Γ \Gamma Γ Constants for Primary Radiography Isotopes

In industrial non-destructive testing (NDT), four radioisotopes represent the vast majority of gamma radiographic inspection. Radiographers must memorize and correctly apply their published Γ \Gamma Γ values in both US Customary units (feet) and SI Metric units (meters).

Radioisotope Symbol Half-Life ( T 1 / 2 T_{1/2} T 1/2 ​ ) Primary Gamma Energies (MeV) US Customary Γ \Gamma Γ ; ( R ⋅ ft 2 / ( Ci ⋅ hr ) \text{R}\cdot\text{ft}^2/(\text{Ci}\cdot\text{hr}) R ⋅ ft 2 / ( Ci ⋅ hr ) ) SI Metric Γ \Gamma Γ ; ( R ⋅ m 2 / ( Ci ⋅ hr ) \text{R}\cdot\text{m}^2/(\text{Ci}\cdot\text{hr}) R ⋅ m 2 / ( Ci ⋅ hr ) ) SI Radiometric Γ \Gamma Γ ; ( mSv ⋅ m 2 / ( GBq ⋅ hr ) \text{mSv}\cdot\text{m}^2/(\text{GBq}\cdot\text{hr}) mSv ⋅ m 2 / ( GBq ⋅ hr ) )

  • Iridium-192 192 Ir ^{192}\text{Ir} 192 Ir 73.83 days 0.31, 0.47, 0.60 (avg ~0.38) 5.2 0.48 0.130
  • Cobalt-60 60 Co ^{60}\text{Co} 60 Co 5.27 years 1.17 and 1.33 (cascade) 14.0 1.30 0.351
  • Selenium-75 75 Se ^{75}\text{Se} 75 Se 119.8 days 0.14, 0.26, 0.28, 0.40 2.2 0.203 0.055
  • Cesium-137 137 Cs ^{137}\text{Cs} 137 Cs 30.07 years 0.662 (Ba-137m daughter) 3.4 0.32 0.086
  • Critical Unit Conversion Relationship

Distance units between feet and meters convert through the geometric ratio of their squares: 1 meter = 3.28084 feet ⟹ ( 3.28084 ft ) 2 = 10.7639 ft 2 1\text{ meter} = 3.28084\text{ feet} \implies (3.28084\text{ ft})^2 = 10.7639\text{ ft}^2 1 meter = 3.28084 feet ⟹ ( 3.28084 ft ) 2 = 10.7639 ft 2

Therefore, to convert an SI metric constant ( R ⋅ m 2 \text{R}\cdot\text{m}^2 R ⋅ m 2 ) to a US Customary constant ( R ⋅ ft 2 \text{R}\cdot\text{ft}^2 R ⋅ ft 2 ): Γ US = Γ metric × 10.764 \Gamma_{\text{US}} = \Gamma_{\text{metric}} \times 10.764 Γ US ​ = Γ metric ​ × 10.764

Verification for Ir-192: 0.48 R ⋅ m 2 × 10.764 ≈ 5.17 ≈ 5.2 R ⋅ ft 2 0.48\text{ R}\cdot\text{m}^2 \times 10.764 \approx 5.17 \approx 5.2\text{ R}\cdot\text{ft}^2 0.48 R ⋅ m 2 × 10.764 ≈ 5.17 ≈ 5.2 R ⋅ ft 2 . (Because 1 m 2 ^2 2 = 10.764 ft 2 ^2 2 , the same field measured 1 m away is spread over 10.764 times the area it occupies 1 ft away.)

The Unshielded Exposure Rate Equation

To calculate the expected unshielded exposure rate ( I I I ) produced by an industrial radiography source of known activity at any specified distance, radiographers combine the isotope's gamma constant with the Inverse-Square Law: I = Γ ⋅ A d 2 I = \frac{\Gamma \cdot A}{d^2} I = d 2 Γ ⋅ A ​

Where:

  • I I I = Radiation exposure rate ( R/hr \text{R/hr} R/hr )
  • Γ \Gamma Γ = Specific gamma-ray constant (matching the distance unit used for d d d )
  • A A A = Source activity in Curies ( Ci \text{Ci} Ci )

d d d = Distance from the source to the observation point ( ft \text{ft} ft or m \text{m} m ) +-------------------------------------------------------------------------+

  • | THE EXPOSURE RATE CALCULATION TRIANGLE |
  • +-------------------------------------------------------------------------+
  • | |
  • | [ Γ · A ] |
  • | ------------- |
  • | [ I · d² ] |
  • | |
  • | Solving for Exposure Rate: I = (Γ · A) / d² |
  • | Solving for Distance: d = √[ (Γ · A) / I ] |
  • | Solving for Source Activity: A = (I · d²) / Γ |
  • +-------------------------------------------------------------------------+
  • Crucial Field Rule on Dimensional Consistency

Radiographers must never mix dimensional systems. If using Γ = 5.2 R ⋅ ft 2 / ( Ci ⋅ hr ) \Gamma = 5.2\text{ R}\cdot\text{ft}^2/(\text{Ci}\cdot\text{hr}) Γ = 5.2 R ⋅ ft 2 / ( Ci ⋅ hr ) , the distance d d d must be expressed in feet . If using Γ = 0.48 R ⋅ m 2 / ( Ci ⋅ hr ) \Gamma = 0.48\text{ R}\cdot\text{m}^2/(\text{Ci}\cdot\text{hr}) Γ = 0.48 R ⋅ m 2 / ( Ci ⋅ hr ) , the distance d d d must be expressed in meters .

  • Step-by-Step Worked Quantitative Field Problems
  • Problem 1: Unshielded Exposure Rates for a 30-Curie Iridium-192 Source

Scenario: A portable gamma camera contains a 30.0 Ci 30.0\text{ Ci} 30.0 Ci Iridium-192 source. During an exposure, the source is cranked out to the collimator-free end stop of a guide tube. Calculate the unshielded exposure rate at:

  • D 1 = 1.0 ft D_1 = 1.0\text{ ft} D 1 ​ = 1.0 ft
  • D 2 = 10.0 ft D_2 = 10.0\text{ ft} D 2 ​ = 10.0 ft
  • D 3 = 50.0 ft D_3 = 50.0\text{ ft} D 3 ​ = 50.0 ft
  • Step 1: Identify Parameters

Isotope: Iridium-192 ⟹ Γ = 5.2 R ⋅ ft 2 / ( Ci ⋅ hr ) \implies \Gamma = 5.2\text{ R}\cdot\text{ft}^2/(\text{Ci}\cdot\text{hr}) ⟹ Γ = 5.2 R ⋅ ft 2 / ( Ci ⋅ hr )

Activity: A = 30.0 Ci A = 30.0\text{ Ci} A = 30.0 Ci

Step 2: Calculate Intensity at 1.0 ft I 1 = Γ ⋅ A d 1 2 = 5.2 × 30.0 ( 1.0 ) 2 = 156.0 1.0 = 156.0 R/hr I_1 = \frac{\Gamma \cdot A}{d_1^2} = \frac{5.2 \times 30.0}{(1.0)^2} = \frac{156.0}{1.0} = 156.0\text{ R/hr} I 1 ​ = d 1 2 ​ Γ ⋅ A ​ = ( 1.0 ) 2 5.2 × 30.0 ​ = 1.0 156.0 ​ = 156.0 R/hr

Note: At 1 foot, the exposure rate is simply Γ × A = 5.2 × 30 = 156 R/hr = 156 , 000 mR/hr \Gamma \times A = 5.2 \times 30 = 156\text{ R/hr} = 156,000\text{ mR/hr} Γ × A = 5.2 × 30 = 156 R/hr = 156 , 000 mR/hr .

Step 3: Calculate Intensity at 10.0 ft I 2 = Γ ⋅ A d 2 2 = 156.0 ( 10.0 ) 2 = 156.0 100.0 = 1.56 R/hr = 1 , 560.0 mR/hr I_2 = \frac{\Gamma \cdot A}{d_2^2} = \frac{156.0}{(10.0)^2} = \frac{156.0}{100.0} = 1.56\text{ R/hr} = 1,560.0\text{ mR/hr} I 2 ​ = d 2 2 ​ Γ ⋅ A ​ = ( 10.0 ) 2 156.0 ​ = 100.0 156.0 ​ = 1.56 R/hr = 1 , 560.0 mR/hr

Step 4: Calculate Intensity at 50.0 ft I 3 = Γ ⋅ A d 3 2 = 156.0 ( 50.0 ) 2 = 156.0 2 , 500.0 = 0.0624 R/hr = 62.4 mR/hr I_3 = \frac{\Gamma \cdot A}{d_3^2} = \frac{156.0}{(50.0)^2} = \frac{156.0}{2,500.0} = 0.0624\text{ R/hr} = 62.4\text{ mR/hr} I 3 ​ = d 3 2 ​ Γ ⋅ A ​ = ( 50.0 ) 2 156.0 ​ = 2 , 500.0 156.0 ​ = 0.0624 R/hr = 62.4 mR/hr

Problem 2: Exposure Rates for an 80-Curie Iridium-192 Source

Scenario: A high-activity 80.0 Ci 80.0\text{ Ci} 80.0 Ci Iridium-192 source is utilized for thick vessel weld radiography. Determine the unshielded exposure rate at the radiographer's crank station located 25.0 ft 25.0\text{ ft} 25.0 ft away, and calculate the distance required to reach the 2.0 mR/hr 2.0\text{ mR/hr} 2.0 mR/hr unrestricted public limit.

Part A: Exposure Rate at 25.0 ft

Calculate 1-foot intensity: I 1ft = Γ ⋅ A = 5.2 × 80.0 = 416.0 R/hr I_{\text{1ft}} = \Gamma \cdot A = 5.2 \times 80.0 = 416.0\text{ R/hr} I 1ft ​ = Γ ⋅ A = 5.2 × 80.0 = 416.0 R/hr

Apply the exposure rate formula for d = 25.0 ft d = 25.0\text{ ft} d = 25.0 ft : I 25 = 416.0 ( 25.0 ) 2 = 416.0 625.0 = 0.6656 R/hr I_{25} = \frac{416.0}{(25.0)^2} = \frac{416.0}{625.0} = 0.6656\text{ R/hr} I 25 ​ = ( 25.0 ) 2 416.0 ​ = 625.0 416.0 ​ = 0.6656 R/hr

Convert to milliroentgens per hour: I 25 = 0.6656 R/hr × 1 , 000 mR/R = 665.6 mR/hr I_{25} = 0.6656\text{ R/hr} \times 1,000\text{ mR/R} = 665.6\text{ mR/hr} I 25 ​ = 0.6656 R/hr × 1 , 000 mR/R = 665.6 mR/hr

Operational Meaning: At 25 feet, an unshielded 80 Ci source delivers over 665 mrem/hr—meaning a worker would exceed their entire annual federal non-occupational dose limit (100 mrem) in less than 10 minutes.

Part B: Distance to 2.0 mR/hr Public Boundary

Express target boundary intensity in Roentgens per hour: I boundary = 2.0 mR/hr = 0.002 R/hr I_{\text{boundary}} = 2.0\text{ mR/hr} = 0.002\text{ R/hr} I boundary ​ = 2.0 mR/hr = 0.002 R/hr

Solve for distance d d d : d = Γ ⋅ A I boundary = 416.0 R/hr 0.002 R/hr = 208 , 000 ≈ 456.07 ft d = \sqrt{\frac{\Gamma \cdot A}{I_{\text{boundary}}}} = \sqrt{\frac{416.0\text{ R/hr}}{0.002\text{ R/hr}}} = \sqrt{208,000} \approx 456.07\text{ ft} d = I boundary ​ Γ ⋅ A ​ ​ = 0.002 R/hr 416.0 R/hr ​ ​ = 208 , 000 ​ ≈ 456.07 ft

Problem 3: High-Energy 100-Curie Cobalt-60 Field Calculations

Scenario: A pipeline bridge inspection utilizes a 100.0 Ci 100.0\text{ Ci} 100.0 Ci Cobalt-60 source. Using both US Customary and SI metric units, calculate:

Unshielded exposure rate at 1.0 ft 1.0\text{ ft} 1.0 ft and 1.0 m 1.0\text{ m} 1.0 m .

Unshielded exposure rate at a distance of 20.0 m 20.0\text{ m} 20.0 m .

Part A: Unshielded Exposure Rate at Reference Distances

In US Customary (at 1.0 ft): I 1ft = Γ US ⋅ A ( 1.0 ) 2 = 14.0 × 100.0 = 1 , 400.0 R/hr I_{\text{1ft}} = \frac{\Gamma_{\text{US}} \cdot A}{(1.0)^2} = 14.0 \times 100.0 = 1,400.0\text{ R/hr} I 1ft ​ = ( 1.0 ) 2 Γ US ​ ⋅ A ​ = 14.0 × 100.0 = 1 , 400.0 R/hr

In SI Metric (at 1.0 m): I 1m = Γ metric ⋅ A ( 1.0 ) 2 = 1.30 × 100.0 = 130.0 R/hr I_{\text{1m}} = \frac{\Gamma_{\text{metric}} \cdot A}{(1.0)^2} = 1.30 \times 100.0 = 130.0\text{ R/hr} I 1m ​ = ( 1.0 ) 2 Γ metric ​ ⋅ A ​ = 1.30 × 100.0 = 130.0 R/hr

Part B: Unshielded Exposure Rate at 20.0 meters I 20 m = Γ metric ⋅ A d 2 = 1.30 × 100.0 ( 20.0 ) 2 = 130.0 400.0 = 0.325 R/hr = 325.0 mR/hr I_{20\text{m}} = \frac{\Gamma_{\text{metric}} \cdot A}{d^2} = \frac{1.30 \times 100.0}{(20.0)^2} = \frac{130.0}{400.0} = 0.325\text{ R/hr} = 325.0\text{ mR/hr} I 20 m ​ = d 2 Γ metric ​ ⋅ A ​ = ( 20.0 ) 2 1.30 × 100.0 ​ = 400.0 130.0 ​ = 0.325 R/hr = 325.0 mR/hr

Comparison: Comparing 100 Ci 100\text{ Ci} 100 Ci of 60 Co ^{60}\text{Co} 60 Co with 100 Ci 100\text{ Ci} 100 Ci of 192 Ir ^{192}\text{Ir} 192 Ir at 1 meter:

192 Ir ^{192}\text{Ir} 192 Ir : 0.48 × 100 = 48 R/hr 0.48 \times 100 = 48\text{ R/hr} 0.48 × 100 = 48 R/hr

60 Co ^{60}\text{Co} 60 Co : 1.30 × 100 = 130 R/hr 1.30 \times 100 = 130\text{ R/hr} 1.30 × 100 = 130 R/hr Cobalt-60 produces 130 / 48 ≈ 2.71 130 / 48 \approx 2.71 130/48 ≈ 2.71 times the radiation intensity of Iridium-192 for the exact same activity due to its dual high-energy photons (1.17 and 1.33 MeV).

Problem 4: Integrating Source Decay Kinetics with Working Distance

Scenario: A radiographer receives a newly activated 80.0 Ci 80.0\text{ Ci} 80.0 Ci Iridium-192 source ( T 1 / 2 = 73.83 days T_{1/2} = 73.83\text{ days} T 1/2 ​ = 73.83 days ). Work is delayed, and the source remains in the storage vault for 147.66 days 147.66\text{ days} 147.66 days (exactly two half-lives).

Determine the source activity after 147.66 days.

Determine the new safe distance to the 2.0 mR/hr 2.0\text{ mR/hr} 2.0 mR/hr boundary.

Quantify the percentage reduction in required boundary distance.

Step 1: Calculate Decayed Activity n = t T 1 / 2 = 147.66 73.83 = 2.0 half-lives n = \frac{t}{T_{1/2}} = \frac{147.66}{73.83} = 2.0\text{ half-lives} n = T 1/2 ​ t ​ = 73.83 147.66 ​ = 2.0 half-lives A ( t ) = A 0 ⋅ ( 0.5 ) n = 80.0 Ci × ( 0.5 ) 2 = 80.0 × 0.25 = 20.0 Ci A(t) = A_0 \cdot (0.5)^n = 80.0\text{ Ci} \times (0.5)^2 = 80.0 \times 0.25 = 20.0\text{ Ci} A ( t ) = A 0 ​ ⋅ ( 0.5 ) n = 80.0 Ci × ( 0.5 ) 2 = 80.0 × 0.25 = 20.0 Ci

Step 2: Calculate New Boundary Distance d new = Γ ⋅ A new I = 5.2 × 20.0 0.002 = 104.0 0.002 = 52 , 000 ≈ 228.04 ft d_{\text{new}} = \sqrt{\frac{\Gamma \cdot A_{\text{new}}}{I}} = \sqrt{\frac{5.2 \times 20.0}{0.002}} = \sqrt{\frac{104.0}{0.002}} = \sqrt{52,000} \approx 228.04\text{ ft} d new ​ = I Γ ⋅ A new ​ ​ ​ = 0.002 5.2 × 20.0 ​ ​ = 0.002 104.0 ​ ​ = 52 , 000 ​ ≈ 228.04 ft

Step 3: Evaluate Distance Change Original distance at 80 Ci = 456.07 ft 456.07\text{ ft} 456.07 ft . New distance at 20 Ci = 228.04 ft 228.04\text{ ft} 228.04 ft . d new d initial = 228.04 456.07 = 0.500 ( 50 % of initial distance ) \frac{d_{\text{new}}}{d_{\text{initial}}} = \frac{228.04}{456.07} = 0.500 \quad (50\% \text{ of initial distance}) d initial ​ d new ​ ​ = 456.07 228.04 ​ = 0.500 ( 50% of initial distance )

Key Physical Insight: Because boundary distance scales with the square root of activity ( d ∝ A d \propto \sqrt{A} d ∝ A ​ ), reducing source activity by a factor of 4 reduces the required standoff distance by exactly 4 = 2 \sqrt{4} = 2 4 ​ = 2 (a 50% reduction in perimeter radius).

Loading diagram... Exposure Rate Comparison at 1 Meter for 50-Curie Sources