Study guide

2.2 Radiation Measurement Units & Quantities

ASNT Industrial Radiography Radiation Safety Personnel IRRSP

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Radiation Physics & Radioactive Decay

1.1 Atomic Structure, Radioactivity & Decay Modes 1.2 Radioactive Decay Kinetics & Half-Life Calculations 1.3 Primary Industrial Radiography Isotopes (Ir-192, Co-60, Se-75, Cs-137) 1.4 Industrial X-Ray Production & Machine Sources

2 Chapter 2: Radiation Interactions & Biological Effects

2.1 Photon Interaction Mechanisms with Matter 2.2 Radiation Measurement Units & Quantities 2.3 Cellular & Molecular Radiobiology 2.4 Biological Effects & Acute Radiation Syndrome

3 Chapter 3: Radiation Protection Standards & Dose Limits

3.1 Occupational Dose Limits under 10 CFR Part 20 3.2 Public Dose Limits & Special Protected Groups 3.3 The ALARA Philosophy & Radiation Safety Principles

4 Chapter 4: ALARA Calculations & Shielding Math

4.1 Inverse-Square Law & Time-Distance Calculations 4.2 Specific Gamma-Ray Constants & Exposure Rate Calculations 4.3 Shielding Mathematics: Half-Value Layers (HVL) & Tenth-Value Layers (TVL) 4.4 Restricted Area & Boundary Calculations

5 Chapter 5: Radiation Detection & Personnel Monitoring

5.1 Radiation Survey Meters: Ion Chambers, Proportional Counters & GM Detectors 5.2 Survey Meter Calibration & Daily Operational Checks 5.3 Personnel Monitoring Equipment & Alarming Rate Meters

6 Chapter 6: Radiographic Exposure Equipment & Operating Mechanics

6.1 Gamma Exposure Devices & Camera Operation 6.2 Drive Cables, Crank Mechanisms & Source Guide Tubes 6.3 Beam Collimators, Source Changers & Leak Testing 6.4 Industrial X-Ray Systems & Facility Equipment

7 Chapter 7: Operational Safety & Field Radiography Procedures

7.1 Two-Person Crew Requirements & Operational Roles 7.2 Mandatory Radiographic Surveys & Verification Protocols 7.3 Perimeter Postings, Boundary Controls & Direct Surveillance 7.4 Permanent Radiographic Installations & Shielded Enclosures

8 Chapter 8: Radiation Emergencies & Source Recovery

8.1 Radiographic Emergency Classification & Immediate Actions 8.2 Source Recovery Principles & Mitigation Techniques 8.3 Regulatory Incident Notification & Reporting

9 Chapter 9: Regulatory Compliance & Transportation

9.1 Federal & Agreement State Regulations, Licensing & Radiation Safety Programs 9.2 DOT HAZMAT Classification, Packaging & Testing 9.3 DOT Labeling, Placarding, Shipping Papers & Emergency Response Info

2.2 Radiation Measurement Units & Quantities

Key Takeaways Explain This Topic AI

Exposure (Roentgen, C/kg) measures ionization in dry air at STP strictly for X and gamma rays, where 1 R = 2.58 × 10⁻⁴ C/kg.

Absorbed dose (rad, Gray) quantifies physical energy deposited per unit mass of any material, with exact conversions 1 Gy = 100 rad = 1 J/kg and 1 rad = 0.01 Gy = 10 mGy.

Equivalent dose (rem, Sievert) weights absorbed dose by radiation biological effectiveness (H = D × w_R), where w_R = 1 for gamma, X-rays, and beta, and w_R = 20 for alpha particles.

Effective dose (E = Σ H_T × w_T) evaluates whole-body stochastic risk using organ-specific tissue weighting factors.

Radioactive activity quantifies disintegration rate, where 1 Curie (Ci) = 3.7 × 10¹⁰ Becquerels (Bq) = 37 Gigabecquerels (GBq).

Last updated: September 2026

2.2 Radiation Measurement Units & Quantities

Radiation safety in industrial radiography requires precise quantitative measurement of radiation fields, accumulated worker doses, and radioactive source strengths. Historically, the United States nuclear industry developed around traditional British/US units (Roentgen, rad, rem, and Curie). Over the past several decades, the international scientific and regulatory community has transitioned to the International System of Units (SI: Gray, Sievert, and Becquerel). The Nuclear Regulatory Commission (NRC) under 10 CFR Part 20 uses traditional units as the primary regulatory standard while recognizing SI units.

To manage personnel safety and maintain regulatory compliance, an industrial radiographer must understand the distinction between the five fundamental radiological quantities:

Exposure: Ionization created in air.

Absorbed Dose: Energy deposited in physical matter.

Equivalent Dose: Biological damage in living tissue accounting for radiation type.

Effective Dose: Overall stochastic cancer/genetic risk accounting for organ sensitivities.

Activity: Rate of nuclear disintegrations in a radioactive source.

1. Exposure ( X X X )

Exposure is a measure of the total electrical charge of ions of one sign produced in a specified mass of dry air by X-rays or gamma rays.

Physical Definition and Constraints

Exposure is defined strictly under precise physical conditions:

It applies only to electromagnetic radiation (X-rays and gamma rays). It cannot be defined or measured for particulate radiation (alpha particles, beta particles, or neutrons).

It applies only to dry air at standard temperature and pressure (STP: 0 ∘ C 0^\circ\text{C} 0 ∘ C and 760 mmHg 760\text{ mmHg} 760 mmHg ). It cannot measure energy imparted to steel, lead, water, or human muscle.

Traditional Unit: The Roentgen (R)

The traditional unit of exposure is the Roentgen (R) , named after Wilhelm Conrad Roentgen. One Roentgen is defined as the quantity of X or gamma radiation that produces ions carrying 1 electrostatic unit (esu) of electrical charge of either sign in 1 cubic centimeter ( 1 cm 3 1\text{ cm}^3 1 cm 3 ) of dry air at STP (which has a mass of 0.001293 g 0.001293\text{ g} 0.001293 g ): 1 R = 1 esu per 0.001293 g of air = 773.4 esu per gram of air 1\text{ R} = 1\text{ esu per } 0.001293\text{ g of air} = 773.4\text{ esu per gram of air} 1 R = 1 esu per 0.001293 g of air = 773.4 esu per gram of air

SI Unit: Coulomb per Kilogram (C/kg)

The SI system measures exposure directly in electrical charge per unit mass: Coulomb per kilogram (C/kg) .

Converting the traditional electrostatic definition into SI units: 1 R = 2.58 × 10 − 4 C/kg of air (exactly) 1\text{ R} = 2.58 \times 10^{-4}\text{ C/kg of air} \quad \text{(exactly)} 1 R = 2.58 × 1 0 − 4 C/kg of air (exactly)

Conversely: 1 C/kg ≈ 3 , 876 R 1\text{ C/kg} \approx 3,876\text{ R} 1 C/kg ≈ 3 , 876 R

In field radiography, survey meters are graduated in subunits: milliroentgens ( 1 mR = 10 − 3 R 1\text{ mR} = 10^{-3}\text{ R} 1 mR = 1 0 − 3 R ) and exposure rates ( m R / h r mR/hr m R / h r or R / h r R/hr R / h r ) .

2. Absorbed Dose ( D D D )

While exposure measures ionization in air, biological damage depends on the actual physical energy absorbed by living cells. Absorbed dose ( D D D ) is defined as the mean energy imparted by ionizing radiation to an absorbing medium per unit mass of that medium: D = Δ E absorbed Δ m D = \frac{\Delta E_{\text{absorbed}}}{\Delta m} D = Δ m Δ E absorbed ​ ​

Unlike exposure, absorbed dose applies to all types of ionizing radiation (photons, electrons, alphas, neutrons) and any absorbing material (air, tissue, water, bone, concrete, steel).

Traditional Unit: The Rad

The traditional unit is the rad (an acronym for Radiation Absorbed Dose ): 1 rad = 100 ergs per gram of material = 0.01 Joules per kilogram (J/kg) 1\text{ rad} = 100\text{ ergs per gram of material} = 0.01\text{ Joules per kilogram (J/kg)} 1 rad = 100 ergs per gram of material = 0.01 Joules per kilogram (J/kg)

SI Unit: The Gray (Gy)

The SI unit of absorbed dose is the Gray (Gy) , named after British radiobiologist Louis Harold Gray: 1 Gy = 1 Joule per kilogram (1 J/kg) 1\text{ Gy} = 1\text{ Joule per kilogram (1 J/kg)} 1 Gy = 1 Joule per kilogram (1 J/kg)

Exact Conversion Factors

Because 1 Gy = 1 J/kg 1\text{ Gy} = 1\text{ J/kg} 1 Gy = 1 J/kg and 1 rad = 0.01 J/kg 1\text{ rad} = 0.01\text{ J/kg} 1 rad = 0.01 J/kg : 1 Gy = 100 rad 1\text{ Gy} = 100\text{ rad} 1 Gy = 100 rad 1 rad = 0.01 Gy = 1 centigray (cGy) = 10 milligrays (mGy) 1\text{ rad} = 0.01\text{ Gy} = 1\text{ centigray (cGy)} = 10\text{ milligrays (mGy)} 1 rad = 0.01 Gy = 1 centigray (cGy) = 10 milligrays (mGy) 1 mrad = 10 micrograys ( μ Gy) 1\text{ mrad} = 10\text{ micrograys (}\mu\text{Gy)} 1 mrad = 10 micrograys ( μ Gy)

The Exposure-to-Dose Relationship (The f f f -Factor)

When dry air is exposed to 1 Roentgen of X or gamma radiation, the energy deposited in the air is: E air = 2.58 × 10 − 4 C/kg × 33.97 J/C = 0.00877 J/kg = 0.877 rad E_{\text{air}} = 2.58 \times 10^{-4}\text{ C/kg} \times 33.97\text{ J/C} = 0.00877\text{ J/kg} = 0.877\text{ rad} E air ​ = 2.58 × 1 0 − 4 C/kg × 33.97 J/C = 0.00877 J/kg = 0.877 rad

When soft human tissue is placed in that same 1 Roentgen radiation field, the higher electron density of tissue causes it to absorb slightly more energy: 1 R of exposure in soft tissue ≈ 0.96 rad ≈ 0.0096 Gy ( 96 ergs/g ) 1\text{ R of exposure in soft tissue} \approx 0.96\text{ rad} \approx 0.0096\text{ Gy} \quad (96\text{ ergs/g}) 1 R of exposure in soft tissue ≈ 0.96 rad ≈ 0.0096 Gy ( 96 ergs/g )

The Radiographer's Operational Equivalence

Because 0.96 rad 0.96\text{ rad} 0.96 rad is within 4% of unity, and because gamma and X-rays have a biological weighting factor of 1, the health physics profession and 10 CFR Part 20 permit the standard industrial radiography working approximation : 1 Roentgen (R) ≈ 1 rad ≈ 1 rem ( 1 mR ≈ 1 mrad ≈ 1 mrem ) 1\text{ Roentgen (R)} \approx 1\text{ rad} \approx 1\text{ rem} \quad (1\text{ mR} \approx 1\text{ mrad} \approx 1\text{ mrem}) 1 Roentgen (R) ≈ 1 rad ≈ 1 rem ( 1 mR ≈ 1 mrad ≈ 1 mrem )

This practical equivalence allows survey meter readings in mR/hr to be directly recorded as equivalent dose rates in mrem/hr for occupational recordkeeping.

3. Equivalent Dose ( H H H )

Equal absorbed doses of different radiation types do not produce equal biological harm. For example, 1 Gy of alpha particles produces substantially more cellular destruction and chromosomal breakage than 1 Gy of gamma rays because alpha particles deposit their energy in dense, concentrated ionization tracks. To place all radiation types on a common scale of biological damage, the absorbed dose is multiplied by a dimensionless Radiation Weighting Factor ( w R w_R w R ​ ) (designated as the Quality Factor, Q Q Q , in 10 CFR 20): H = D × w R ( or H = D × Q ) H = D \times w_R \quad (\text{or } H = D \times Q) H = D × w R ​ ( or H = D × Q )

Radiation Weighting Factors ( w R w_R w R ​ / Quality Factors Q Q Q )

ICRP radiation weighting factors, alongside the quality factors codified in NRC 10 CFR § 20.1004 (tables 1004(b).1 and 1004(b).2):

  • Radiation Type and Energy Spectrum Radiation Weighting Factor ( w R w_R w R ​ / Q Q Q )
  • X-rays, Gamma rays, and Beta particles (electrons/positrons) 1
  • Thermal (slow) neutrons ( E < 10 keV E < 10\text{ keV} E < 10 keV ) 2 to 5

Fast neutrons ( 100 keV to 2 MeV 100\text{ keV to } 2\text{ MeV} 100 keV to 2 MeV ) 10 to 20 (peaks at 20 near 1 MeV 1\text{ MeV} 1 MeV )

  • Protons (high energy) 2 (ICRP 103) / 10 (10 CFR 20.1004)
  • Alpha particles, fission fragments, heavy recoil nuclei 20

An alpha particle is 20 times more damaging per unit of absorbed dose than an industrial gamma photon.

Traditional Unit: The Rem

The traditional unit of equivalent dose is the rem ( Roentgen Equivalent Man ): H (rem) = D (rad) × Q H\text{ (rem)} = D\text{ (rad)} \times Q H (rem) = D (rad) × Q

SI Unit: The Sievert (Sv)

The SI unit of equivalent dose is the Sievert (Sv) , named after Swedish physicist Rolf Sievert: H (Sv) = D (Gy) × w R H\text{ (Sv)} = D\text{ (Gy)} \times w_R H (Sv) = D (Gy) × w R ​

Exact Conversion Factors

Because 1 Gy = 100 rad 1\text{ Gy} = 100\text{ rad} 1 Gy = 100 rad and w R = Q w_R = Q w R ​ = Q : 1 Sv = 100 rem 1\text{ Sv} = 100\text{ rem} 1 Sv = 100 rem 1 rem = 0.01 Sv = 10 millisieverts (mSv) 1\text{ rem} = 0.01\text{ Sv} = 10\text{ millisieverts (mSv)} 1 rem = 0.01 Sv = 10 millisieverts (mSv) 1 mrem = 0.01 mSv = 10 microsieverts ( μ Sv) 1\text{ mrem} = 0.01\text{ mSv} = 10\text{ microsieverts (}\mu\text{Sv)} 1 mrem = 0.01 mSv = 10 microsieverts ( μ Sv) 100 mrem = 1 mSv 100\text{ mrem} = 1\text{ mSv} 100 mrem = 1 mSv

Regulatory Context: The annual occupational whole-body limit for a radiographer under 10 CFR § 20.1201 is 5 rem (5,000 mrem) , which equals exactly 0.05 Sv (50 mSv) .

4. Effective Dose ( E E E )

In many occupational scenarios, radiation exposure is non-uniform or restricted to partial body regions (such as hands handling a collimator or thyroid exposure during beam alignment). Different organs possess vastly different sensitivities to radiation-induced cancer death and hereditary defects. Effective Dose ( E E E ) accounts for both the type of radiation and the specific organs irradiated, quantifying the overall stochastic risk to the whole person: E = ∑ T ( H T × w T ) E = \sum_T (H_T \times w_T) E = T ∑ ​ ( H T ​ × w T ​ )

Where:

H T H_T H T ​ is the equivalent dose received by organ or tissue T T T .

w T w_T w T ​ is the dimensionless Tissue Weighting Factor , representing the proportion of the total stochastic risk attributable to that organ.

The sum of all tissue weighting factors across the entire human body equals exactly 1.00 ( ∑ w T = 1.00 \sum w_T = 1.00 ∑ w T ​ = 1.00 ).

Tissue Weighting Factors Comparison

Tissue / Organ ( T T T ) ICRP 60 / 103 Weighting Factor ( w T w_T w T ​ ) 10 CFR Part 20 Value ( w T w_T w T ​ )

  • Gonads (testes / ovaries) 0.08 (ICRP 103) / 0.20 (ICRP 60) 0.25
  • Red Bone Marrow 0.12 0.12
  • Colon 0.12 —
  • Lungs 0.12 0.12
  • Stomach 0.12 —
  • Bladder 0.04 —
  • Breasts 0.12 (ICRP 103) / 0.05 (ICRP 60) 0.15
  • Thyroid 0.04 0.03
  • Bone Surface 0.01 0.03
  • Skin 0.01 —
  • Remainder Tissues 0.12 0.30

If the entire body is irradiated uniformly by gamma radiation (as in an open-field industrial exposure), ∑ w T = 1.0 \sum w_T = 1.0 ∑ w T ​ = 1.0 , meaning the Effective Dose ( E E E ) is mathematically identical to the Equivalent Dose ( H H H ) and the Absorbed Dose ( D D D ).

5. Activity ( A A A )

Activity measures the nuclear source strength—the rate at which unstable atomic nuclei undergo spontaneous radioactive decay transformations per unit time: A = Δ N Δ t = λ N A = \frac{\Delta N}{\Delta t} = \lambda N A = Δ t Δ N ​ = λ N

Where λ \lambda λ is the decay constant ( λ = 0.693 / T 1 / 2 \lambda = 0.693 / T_{1/2} λ = 0.693/ T 1/2 ​ ) and N N N is the number of radioactive atoms present. Activity describes how many disintegrations occur per second; it does not describe the energy of the emissions or the hazard level without factoring in isotope-specific gamma ray constants.

Traditional Unit: The Curie (Ci)

The traditional unit of activity is the Curie (Ci) , originally defined as the activity of 1 gram of Radium-226 in equilibrium with its daughters. It is standardized as: 1 Ci = 3.700 × 10 10 disintegrations per second (dps) 1\text{ Ci} = 3.700 \times 10^{10}\text{ disintegrations per second (dps)} 1 Ci = 3.700 × 1 0 10 disintegrations per second (dps)

Subunits:

Millicurie (mCi): 1 mCi = 10 − 3 Ci = 3.7 × 10 7 dps 1\text{ mCi} = 10^{-3}\text{ Ci} = 3.7 \times 10^7\text{ dps} 1 mCi = 1 0 − 3 Ci = 3.7 × 1 0 7 dps

Microcurie ( μ \mu μ Ci): 1 μ Ci = 10 − 6 Ci = 3.7 × 10 4 dps 1\text{ }\mu\text{Ci} = 10^{-6}\text{ Ci} = 3.7 \times 10^4\text{ dps} 1 μ Ci = 1 0 − 6 Ci = 3.7 × 1 0 4 dps

SI Unit: The Becquerel (Bq)

The SI unit of activity is the Becquerel (Bq) , defined as exactly one disintegration per second: 1 Bq = 1 disintegration per second (1 dps) 1\text{ Bq} = 1\text{ disintegration per second (1 dps)} 1 Bq = 1 disintegration per second (1 dps)

Exact Conversion Factors

Because 1 Ci = 3.7 × 10 10 dps 1\text{ Ci} = 3.7 \times 10^{10}\text{ dps} 1 Ci = 3.7 × 1 0 10 dps : 1 Ci = 3.7 × 10 10 Bq = 37 Gigabecquerels (GBq) = 0.037 Terabecquerels (TBq) 1\text{ Ci} = 3.7 \times 10^{10}\text{ Bq} = 37\text{ Gigabecquerels (GBq)} = 0.037\text{ Terabecquerels (TBq)} 1 Ci = 3.7 × 1 0 10 Bq = 37 Gigabecquerels (GBq) = 0.037 Terabecquerels (TBq) 1 mCi = 37 Megabecquerels (MBq) 1\text{ mCi} = 37\text{ Megabecquerels (MBq)} 1 mCi = 37 Megabecquerels (MBq) 1 μ Ci = 37 Kilobecquerels (kBq) 1\text{ }\mu\text{Ci} = 37\text{ Kilobecquerels (kBq)} 1 μ Ci = 37 Kilobecquerels (kBq) 1 TBq = 10 12 Bq = 27.03 Ci 1\text{ TBq} = 10^{12}\text{ Bq} = 27.03\text{ Ci} 1 TBq = 1 0 12 Bq = 27.03 Ci 1 GBq = 10 9 Bq = 0.02703 Ci = 27.03 mCi 1\text{ GBq} = 10^9\text{ Bq} = 0.02703\text{ Ci} = 27.03\text{ mCi} 1 GBq = 1 0 9 Bq = 0.02703 Ci = 27.03 mCi

Practical Radiography Example: A typical newly loaded Iridium-192 radiography pigtail rated at 100 Ci has an SI activity of 3.7 TBq (3,700 GBq) .

Master Unit Conversion & Comparison Table

Quantity Dimensional Basis Traditional Unit SI Unit Conversion Multiplier

Exposure ( X X X ) Charge per mass of air Roentgen (R) Coulomb / kilogram (C/kg) 1 R = 2.58 × 10 − 4 C/kg 1\text{ R} = 2.58 \times 10^{-4}\text{ C/kg} 1 R = 2.58 × 1 0 − 4 C/kg ; 1 C/kg = 3 , 876 R 1\text{ C/kg} = 3,876\text{ R} 1 C/kg = 3 , 876 R

Absorbed Dose ( D D D ) Energy imparted per mass rad Gray (Gy = J/kg) 1 Gy = 100 rad 1\text{ Gy} = 100\text{ rad} 1 Gy = 100 rad ; 1 rad = 0.01 Gy = 10 mGy 1\text{ rad} = 0.01\text{ Gy} = 10\text{ mGy} 1 rad = 0.01 Gy = 10 mGy

Equivalent Dose ( H H H ) Biologically weighted dose rem Sievert (Sv = J/kg) 1 Sv = 100 rem 1\text{ Sv} = 100\text{ rem} 1 Sv = 100 rem ; 1 rem = 0.01 Sv = 10 mSv 1\text{ rem} = 0.01\text{ Sv} = 10\text{ mSv} 1 rem = 0.01 Sv = 10 mSv

Effective Dose ( E E E ) Organ-weighted stochastic dose rem Sievert (Sv) 1 Sv = 100 rem 1\text{ Sv} = 100\text{ rem} 1 Sv = 100 rem ; 1 rem = 10 mSv 1\text{ rem} = 10\text{ mSv} 1 rem = 10 mSv

Activity ( A A A ) Disintegration rate Curie (Ci) Becquerel (Bq = 1 dps) 1 Ci = 37 GBq = 3.7 × 10 10 Bq 1\text{ Ci} = 37\text{ GBq} = 3.7 \times 10^{10}\text{ Bq} 1 Ci = 37 GBq = 3.7 × 1 0 10 Bq ; 1 TBq = 27.03 Ci 1\text{ TBq} = 27.03\text{ Ci} 1 TBq = 27.03 Ci

  • Worked Practical Dosimetry Examples
  • Example 1: Activity Conversion for Shipping Papers

A radiographer orders an Iridium-192 source with an activity of 85 Curies . DOT shipping documentation requires source activity to be reported in SI units (Gigabecquerels and Terabecquerels). Activity in GBq = 85 Ci × 37 GBq/Ci = 3 , 145 GBq \text{Activity in GBq} = 85\text{ Ci} \times 37\text{ GBq/Ci} = 3,145\text{ GBq} Activity in GBq = 85 Ci × 37 GBq/Ci = 3 , 145 GBq Activity in TBq = 3 , 145 GBq 1 , 000 GBq/TBq = 3.145 TBq \text{Activity in TBq} = \frac{3,145\text{ GBq}}{1,000\text{ GBq/TBq}} = 3.145\text{ TBq} Activity in TBq = 1 , 000 GBq/TBq 3 , 145 GBq ​ = 3.145 TBq

Example 2: Translating Survey Meter Measurements

During a perimeter boundary survey, an alarming ratemeter records an exposure rate of 250 mR/hr . A technician stands at this boundary for 12 minutes . Calculate:

Total accumulated exposure in mR.

Absorbed dose to soft tissue in milligray (mGy).

Equivalent dose in millisieverts (mSv) and microsieverts ( μ \mu μ Sv).

Solution:

Exposure: Δ t = 12 min = 0.20 hr \Delta t = 12\text{ min} = 0.20\text{ hr} Δ t = 12 min = 0.20 hr . Exposure = 250 mR/hr × 0.20 hr = 50 mR = 0.050 R \text{Exposure} = 250\text{ mR/hr} \times 0.20\text{ hr} = 50\text{ mR} = 0.050\text{ R} Exposure = 250 mR/hr × 0.20 hr = 50 mR = 0.050 R

Absorbed Dose: Applying the tissue conversion factor ( 1 R ≈ 0.96 rad = 9.6 mGy 1\text{ R} \approx 0.96\text{ rad} = 9.6\text{ mGy} 1 R ≈ 0.96 rad = 9.6 mGy ): D = 0.050 R × 9.6 mGy/R = 0.48 mGy ( or 48 mrad ) D = 0.050\text{ R} \times 9.6\text{ mGy/R} = 0.48\text{ mGy} \quad (\text{or } 48\text{ mrad}) D = 0.050 R × 9.6 mGy/R = 0.48 mGy ( or 48 mrad ) Using the operational rule of thumb ( 1 mR ≈ 1 mrad = 0.01 mGy 1\text{ mR} \approx 1\text{ mrad} = 0.01\text{ mGy} 1 mR ≈ 1 mrad = 0.01 mGy ): D ≈ 50 mrad = 0.50 mGy D \approx 50\text{ mrad} = 0.50\text{ mGy} D ≈ 50 mrad = 0.50 mGy

Equivalent Dose: For gamma radiation, w R = 1 w_R = 1 w R ​ = 1 , so H (rem) = D (rad) H\text{ (rem)} = D\text{ (rad)} H (rem) = D (rad) : H = 50 mrem H = 50\text{ mrem} H = 50 mrem Converting to SI units: H = 50 mrem × 0.01 mSv/mrem = 0.50 mSv = 500 μ Sv H = 50\text{ mrem} \times 0.01\text{ mSv/mrem} = 0.50\text{ mSv} = 500\text{ }\mu\text{Sv} H = 50 mrem × 0.01 mSv/mrem = 0.50 mSv = 500 μ Sv

Example 3: Effective Dose from Partial Body Exposure

A radiographer receives a non-uniform occupational exposure where the chest/lungs receive 120 mrem 120\text{ mrem} 120 mrem ( 1.2 mSv 1.2\text{ mSv} 1.2 mSv ) and the thyroid receives 200 mrem 200\text{ mrem} 200 mrem ( 2.0 mSv 2.0\text{ mSv} 2.0 mSv ), with the rest of the body shielded. Using ICRP weighting factors ( w lung = 0.12 w_{\text{lung}} = 0.12 w lung ​ = 0.12 , w thyroid = 0.04 w_{\text{thyroid}} = 0.04 w thyroid ​ = 0.04 ): E = ( H lung × w lung ) + ( H thyroid × w thyroid ) E = (H_{\text{lung}} \times w_{\text{lung}}) + (H_{\text{thyroid}} \times w_{\text{thyroid}}) E = ( H lung ​ × w lung ​ ) + ( H thyroid ​ × w thyroid ​ ) E = ( 120 mrem × 0.12 ) + ( 200 mrem × 0.04 ) = 14.4 mrem + 8.0 mrem = 22.4 mrem ( 0.224 mSv ) E = (120\text{ mrem} \times 0.12) + (200\text{ mrem} \times 0.04) = 14.4\text{ mrem} + 8.0\text{ mrem} = 22.4\text{ mrem} \quad (0.224\text{ mSv}) E = ( 120 mrem × 0.12 ) + ( 200 mrem × 0.04 ) = 14.4 mrem + 8.0 mrem = 22.4 mrem ( 0.224 mSv )

Even though the thyroid received 200 mrem, its low weighting factor (0.04) means it contributes only 8 mrem to the whole-body stochastic risk.