Study guide

1.2 Radioactive Decay Kinetics & Half-Life Calculations

ASNT Industrial Radiography Radiation Safety Personnel IRRSP

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Radiation Physics & Radioactive Decay

1.1 Atomic Structure, Radioactivity & Decay Modes 1.2 Radioactive Decay Kinetics & Half-Life Calculations 1.3 Primary Industrial Radiography Isotopes (Ir-192, Co-60, Se-75, Cs-137) 1.4 Industrial X-Ray Production & Machine Sources

2 Chapter 2: Radiation Interactions & Biological Effects

2.1 Photon Interaction Mechanisms with Matter 2.2 Radiation Measurement Units & Quantities 2.3 Cellular & Molecular Radiobiology 2.4 Biological Effects & Acute Radiation Syndrome

3 Chapter 3: Radiation Protection Standards & Dose Limits

3.1 Occupational Dose Limits under 10 CFR Part 20 3.2 Public Dose Limits & Special Protected Groups 3.3 The ALARA Philosophy & Radiation Safety Principles

4 Chapter 4: ALARA Calculations & Shielding Math

4.1 Inverse-Square Law & Time-Distance Calculations 4.2 Specific Gamma-Ray Constants & Exposure Rate Calculations 4.3 Shielding Mathematics: Half-Value Layers (HVL) & Tenth-Value Layers (TVL) 4.4 Restricted Area & Boundary Calculations

5 Chapter 5: Radiation Detection & Personnel Monitoring

5.1 Radiation Survey Meters: Ion Chambers, Proportional Counters & GM Detectors 5.2 Survey Meter Calibration & Daily Operational Checks 5.3 Personnel Monitoring Equipment & Alarming Rate Meters

6 Chapter 6: Radiographic Exposure Equipment & Operating Mechanics

6.1 Gamma Exposure Devices & Camera Operation 6.2 Drive Cables, Crank Mechanisms & Source Guide Tubes 6.3 Beam Collimators, Source Changers & Leak Testing 6.4 Industrial X-Ray Systems & Facility Equipment

7 Chapter 7: Operational Safety & Field Radiography Procedures

7.1 Two-Person Crew Requirements & Operational Roles 7.2 Mandatory Radiographic Surveys & Verification Protocols 7.3 Perimeter Postings, Boundary Controls & Direct Surveillance 7.4 Permanent Radiographic Installations & Shielded Enclosures

8 Chapter 8: Radiation Emergencies & Source Recovery

8.1 Radiographic Emergency Classification & Immediate Actions 8.2 Source Recovery Principles & Mitigation Techniques 8.3 Regulatory Incident Notification & Reporting

9 Chapter 9: Regulatory Compliance & Transportation

9.1 Federal & Agreement State Regulations, Licensing & Radiation Safety Programs 9.2 DOT HAZMAT Classification, Packaging & Testing 9.3 DOT Labeling, Placarding, Shipping Papers & Emergency Response Info

1.2 Radioactive Decay Kinetics & Half-Life Calculations

Key Takeaways Explain This Topic AI

Radioactive decay is governed by first-order exponential kinetics: A = A₀ · e^(-λt) or A = A₀ · (1/2)^(t / T_1/2).

The decay constant (λ) is inversely proportional to half-life: λ = ln(2) / T_1/2 ≈ 0.693 / T_1/2.

One Curie (Ci) equals exactly 3.7 × 10¹⁰ disintegrations per second (37 GBq), while one Becquerel (Bq) equals 1 disintegration per second.

Specific activity represents the radioactivity per unit mass (Ci/g or TBq/g); high specific activity enables physically small focal spot sizes for sharp radiography.

Industrial isotopes are manufactured primarily in nuclear research reactors via thermal neutron capture reactions (n, γ).

Last updated: September 2026

The Fundamental Law of Radioactive Decay

Radioactive decay is a purely stochastic (probabilistic) nuclear process. For any single unstable nucleus, it is physically impossible to predict the exact instant of disintegration. However, for a macroscopic collection of N N N identical radioactive atoms, the rate of nuclear disintegration ( − d N / d t -dN/dt − d N / d t ), termed the activity ( A A A ) , is strictly proportional to the number of radioactive atoms present at that moment: A = − d N d t = λ N A = -\frac{dN}{dt} = \lambda N A = − d t d N ​ = λ N

where λ \lambda λ is the characteristic decay constant of the specific radioisotope (expressed in units of time − 1 \text{time}^{-1} time − 1 , such as s − 1 \text{s}^{-1} s − 1 , hr − 1 \text{hr}^{-1} hr − 1 , or day − 1 \text{day}^{-1} day − 1 ). The decay constant represents the constant fractional probability per unit time that a given nucleus will decay.

Exponential Decay Equations

Integrating the differential decay equation yields the classical exponential decay law: N ( t ) = N 0 e − λ t N(t) = N_0 e^{-\lambda t} N ( t ) = N 0 ​ e − λ t

Because activity A A A is directly proportional to N N N ( A = λ N A = \lambda N A = λ N ): A ( t ) = A 0 e − λ t A(t) = A_0 e^{-\lambda t} A ( t ) = A 0 ​ e − λ t

where:

  • A ( t ) A(t) A ( t ) = Activity remaining after elapsed time t t t ,
  • A 0 A_0 A 0 ​ = Initial activity at time t = 0 t = 0 t = 0 ,
  • λ \lambda λ = Decay constant,

t t t = Elapsed time (in the same units as λ \lambda λ ).

Half-Life ( T 1 / 2 T_{1/2} T 1/2 ​ ) and the Half-Life Formula

The half-life ( T 1 / 2 T_{1/2} T 1/2 ​ ) is defined as the time required for one-half (50%) of the radioactive atoms in a sample to disintegrate, or for the activity of the sample to decrease to exactly half its initial value ( A = A 0 / 2 A = A_0 / 2 A = A 0 ​ /2 ).

Setting A ( t ) = A 0 / 2 A(t) = A_0 / 2 A ( t ) = A 0 ​ /2 and t = T 1 / 2 t = T_{1/2} t = T 1/2 ​ in the exponential decay law: A 0 2 = A 0 e − λ T 1 / 2 ⟹ 1 2 = e − λ T 1 / 2 \frac{A_0}{2} = A_0 e^{-\lambda T_{1/2}} \implies \frac{1}{2} = e^{-\lambda T_{1/2}} 2 A 0 ​ ​ = A 0 ​ e − λ T 1/2 ​ ⟹ 2 1 ​ = e − λ T 1/2 ​

Taking the natural logarithm of both sides: ln ⁡ ( 1 2 ) = − λ T 1 / 2 ⟹ − 0.69315 = − λ T 1 / 2 \ln\left(\frac{1}{2}\right) = -\lambda T_{1/2} \implies -0.69315 = -\lambda T_{1/2} ln ( 2 1 ​ ) = − λ T 1/2 ​ ⟹ − 0.69315 = − λ T 1/2 ​ λ = ln ⁡ ( 2 ) T 1 / 2 ≈ 0.693 T 1 / 2 \lambda = \frac{\ln(2)}{T_{1/2}} \approx \frac{0.693}{T_{1/2}} λ = T 1/2 ​ ln ( 2 ) ​ ≈ T 1/2 ​ 0.693 ​

Substituting λ \lambda λ back into the exponential equation yields the highly practical half-life decay equation utilized across all industrial radiography field operations: A ( t ) = A 0 ( 1 2 ) t T 1 / 2 = A 0 ⋅ ( 0.5 ) n A(t) = A_0 \left(\frac{1}{2}\right)^{\frac{t}{T_{1/2}}} = A_0 \cdot (0.5)^n A ( t ) = A 0 ​ ( 2 1 ​ ) T 1/2 ​ t ​ = A 0 ​ ⋅ ( 0.5 ) n

where n = t / T 1 / 2 n = t / T_{1/2} n = t / T 1/2 ​ represents the number of elapsed half-lives (which does not need to be an integer).

Step-by-Step Decay Factor Progression

Elapsed Half-Lives ( n n n ) Fraction of Activity Remaining Decimal Decay Factor ( D F DF D F ) Percent of Initial Activity Remaining

  • 0 1 1 1 1.0000 100.0%
  • 1 1 / 2 1/2 1/2 0.5000 50.0%
  • 2 1 / 4 1/4 1/4 0.2500 25.0%
  • 3 1 / 8 1/8 1/8 0.1250 12.5%
  • 4 1 / 16 1/16 1/16 0.0625 6.25%
  • 5 1 / 32 1/32 1/32 0.03125 3.125%
  • 7 1 / 128 1/128 1/128 0.00781 0.78% (decayed by > 99%)
  • 10 1 / 1024 1/1024 1/1024 0.000976 < 0.1% (rule of thumb: essentially decayed)
  • Worked Field Calculation Example

Problem : A radiographer receives a newly loaded Iridium-192 source certified at 100 Curies on September 1. What will be the source activity after 148 days ? (Half-life of Ir-192 = 74 days).

Calculate the number of elapsed half-lives ( n n n ): n = t T 1 / 2 = 148 days 74 days = 2.0 n = \frac{t}{T_{1/2}} = \frac{148\text{ days}}{74\text{ days}} = 2.0 n = T 1/2 ​ t ​ = 74 days 148 days ​ = 2.0

Calculate remaining activity using the half-life formula: A = A 0 ⋅ ( 0.5 ) n = 100 Ci × ( 0.5 ) 2 = 100 Ci × 0.25 = 25 Ci A = A_0 \cdot (0.5)^n = 100\text{ Ci} \times (0.5)^2 = 100\text{ Ci} \times 0.25 = 25\text{ Ci} A = A 0 ​ ⋅ ( 0.5 ) n = 100 Ci × ( 0.5 ) 2 = 100 Ci × 0.25 = 25 Ci

Answer : Exactly 25 Curies remain.

Now consider a fractional half-life problem: What is the activity after 45 days ?

n = 45 / 73.83 = 0.6095 n = 45 / 73.83 = 0.6095 n = 45/73.83 = 0.6095

A = 100 × ( 0.5 ) 0.6095 = 100 × 0.6554 = 65.54 Ci A = 100 \times (0.5)^{0.6095} = 100 \times 0.6554 = 65.54\text{ Ci} A = 100 × ( 0.5 ) 0.6095 = 100 × 0.6554 = 65.54 Ci Radiographers use printed manufacturer decay charts or daily calculation tables derived from this exact mathematical formula to set radiography exposure times.

Specific Activity and Source Pellet Geometry

Specific activity is defined as the radioactivity per unit mass of the isotope, expressed in Curies per gram (Ci/g) or Terabecquerels per gram (TBq/g) : Specific Activity = A m = λ N A M \text{Specific Activity} = \frac{A}{m} = \frac{\lambda N_A}{M} Specific Activity = m A ​ = M λ N A ​ ​

where N A N_A N A ​ is Avogadro's number ( 6.022 × 10 23 atoms/mol 6.022 \times 10^{23}\text{ atoms/mol} 6.022 × 1 0 23 atoms/mol ) and M M M is the molar mass.

Why Specific Activity Dictates Radiographic Quality

In non-destructive examination, the sharpness of the radiographic image depends on minimizing geometric unsharpness ( U g U_g U g ​ ) : U g = F ⋅ d D U_g = \frac{F \cdot d}{D} U g ​ = D F ⋅ d ​

where F F F is the physical dimension of the radiation focal spot (the source pellet diameter), d d d is the object-to-film distance, and D D D is the source-to-object distance. A smaller focal spot ( F F F ) produces sharper, higher-resolution radiographs that reveal minute weld cracks and lack of fusion.

Because Iridium-192 can be activated to exceptionally high specific activity (often 200 to 450 Ci/g ), a 100-Curie Ir-192 source pellet measures only 2.5 mm to 3.0 mm in diameter. Conversely, Cobalt-60 has a lower specific activity (typically 50 to 100 Ci/g), meaning a 100-Curie Co-60 source requires a larger physical pellet (4 to 6 mm diameter), resulting in greater geometric unsharpness.

Artificial Radioisotope Production in Nuclear Reactors

None of the primary radioisotopes used in modern industrial radiography exist in nature; they are artificially created by exposing stable target elements to high thermal neutron fluxes inside nuclear research reactors:

Iridium-192 Production : Stable Iridium-191 ( 37.3 % 37.3\% 37.3% natural abundance) captures a thermal neutron via the ( n , γ ) (n, \gamma) ( n , γ ) reaction: 77 191 Ir + 0 1 n ⟶ 77 192 Ir + γ {}^{191}_{77}\text{Ir} + {}^1_0n \longrightarrow {}^{192}_{77}\text{Ir} + \gamma 77 191 ​ Ir + 0 1 ​ n ⟶ 77 192 ​ Ir + γ

Cobalt-60 Production : Stable natural Cobalt-59 ( 100 % 100\% 100% abundance) undergoes neutron capture: 27 59 Co + 0 1 n ⟶ 27 60 Co + γ {}^{59}_{27}\text{Co} + {}^1_0n \longrightarrow {}^{60}_{27}\text{Co} + \gamma 27 59 ​ Co + 0 1 ​ n ⟶ 27 60 ​ Co + γ

Selenium-75 Production : Enriched Selenium-74 targets capture a neutron: 34 74 Se + 0 1 n ⟶ 34 75 Se + γ {}^{74}_{34}\text{Se} + {}^1_0n \longrightarrow {}^{75}_{34}\text{Se} + \gamma 34 74 ​ Se + 0 1 ​ n ⟶ 34 75 ​ Se + γ