Study guide

21.1 Timed 50+40 Strategy and CBT Rules

ASNT NDT Level II Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Certification Paths: SNT-TC-1A, CP-189, and ASNT Central Certification 1.3 Level I vs Level II vs Level III Responsibilities 1.4 Application, Scheduling, Identification, and Retake Rules

2 Eligibility, Fees & Recertification

2.1 Training Hours, Experience Days, and Documentation 2.2 Vision, Practical Exams, and the Employer's Written Practice 2.3 Fees, Validity, Recertification, and 529 Funding

3 NDT Fundamentals & Method Selection

3.1 What NDT Can and Cannot Detect 3.2 Surface vs Subsurface and Method Selection Logic 3.3 Product Forms: Welds, Castings, Forgings, Wrought, In-Service Damage

4 MT Principles & Flux Fields

4.1 Magnetism, Permeability, and Flux Leakage 4.2 Flux Fields: Circular vs Longitudinal 4.3 How Discontinuities Distort Magnetic Fields

5 MT Magnetization & Demagnetization

5.1 Magnetization by Electric Current: Contact, Prods, Central Conductor 5.2 Selecting the Proper Magnetization Method: Coils, Yokes, Current Type 5.3 Demagnetization Procedures and Residual Field Limits

6 MT Equipment, Evaluation & Process Control

6.1 MT Equipment, Media, and Lighting 6.2 Types of Discontinuities Detected by MT 6.3 MT Evaluation Techniques 6.4 Quality Control of MT Equipment and Processes

7 PT Principles & Materials

7.1 PT Principles: Capillarity, Wetting, and Process Physics 7.2 Penetrant Types, Methods, and Sensitivity Classes 7.3 Developers and Process Sequence Controls

8 PT Method Selection & Process Control

8.1 Selecting the Appropriate PT Method for the Job 8.2 Surface Preparation, Dwell, Removal, and Lighting 8.3 Station Equipment, Process Control, and Safety

9 PT Indications, Evaluation & Standards

9.1 Relevant, Nonrelevant, and False Indications 9.2 Evaluating Indication Size, Shape, and Persistence 9.3 PT Procedures, ASTM/ASME Standards, and Acceptance

10 RT Principles & Exposure Technique

10.1 Radiation Physics: X-ray vs Gamma, Energy, and Attenuation 10.2 Exposure Geometry, Inverse Square Law, and Geometric Unsharpness 10.3 Radiographic Technique: kV, mA-min, Screens, and Source Selection

11 RT Image Quality, Processing & Indications

11.1 Film, Digital Detectors, Density, and Image Quality Indicators 11.2 Darkroom Facilities, Processing, and Artifact Control 11.3 Radiographic Indications, Discontinuities, and Defects

12 RT Product Discontinuities & Radiation Safety

12.1 Manufacturing Processes and Associated Discontinuities 12.2 Radiological Safety: Time, Distance, Shielding, and Dose Limits 12.3 RT Procedures, Codes, and Viewing Practice

13 UT Principles & Techniques

13.1 Sound Propagation, Modes, Velocity, and Wavelength 13.2 Transducers, Couplant, and Straight-Beam Techniques 13.3 Angle-Beam Techniques, Snell's Law, and Skip Distance

14 UT Calibration & Base Material

14.1 Calibration Blocks, DAC, TCG, and Sensitivity Setting 14.2 Evaluating Base-Material Product Forms 14.3 Evaluating Weldments

15 UT Bonds, Detection & Evaluation

15.1 Evaluating Bonded Structures 15.2 Discontinuity Detection and Characterization 15.3 General Evaluation, Sizing, and Acceptance Logic

16 VT Scope, Vision & Lighting

16.1 Purpose and Scope of VT 16.2 Elements of Vision 16.3 Elements of Lighting 16.4 Contrast and Resolution

17 VT Optics, Equipment & Discontinuities

17.1 Optics and Magnification 17.2 VT Equipment: Direct, Remote, and Measuring Tools 17.3 Visual Appearance of Discontinuities

18 VT Evaluation, Codes & Employer Topics

18.1 Evaluation and Reporting 18.2 Codes, Standards, and Specifications 18.3 Employer-Specific Topics and Written-Practice Controls

19 Specific Exam: Codes & Sectors

19.1 How the Specific Exam Differs from the General Exam 19.2 General Industry Codes and Procedure Use 19.3 Pressure Equipment Sector Codes (ASME, NBIC, API context)

20 Specific Exam: Applications & Techniques

20.1 Applications: Matching Method to Product Form and Access 20.2 Technique Selection and Essential Variables 20.3 Procedure Compliance, Reporting, and Acceptance/Rejection

21 Exam Strategy & Maintenance

21.1 Timed 50+40 Strategy and CBT Rules 21.2 Common Traps by Method 21.3 Weak-Area Review and Recertification Planning

21.1 Timed 50+40 Strategy and CBT Rules

Key Takeaways Explain This Topic AI

The general exam is 50 items in 2 hours (about 2.4 minutes per item) and the specific exam is 40 items in 2 hours (about 3 minutes per item); unused minutes do not transfer between papers.

ASNT delivers both papers as English computer-based tests at Pearson VUE or an authorized exam center; an online translation dictionary covers NDT terms in Korean, Mandarin, Spanish, UK English, and Arabic.

Arrive at least 30 minutes early with two original valid IDs, expect a photo at the center, review the CBT and calculator demo, and plan at least half a day.

ASNT does not publish a single fixed cut score; typical exams fall in the 70%–80% range, and pretest items may exist and are unscored — ASNT does not publish a pretest count.

Flag, skip, and return. Do not spend eight minutes on one formula if unread procedure items remain.

Last updated: August 2026

The American Society for Nondestructive Testing ( ASNT ) Nondestructive Testing ( NDT ) Level II written package is two separate computer-based papers, not one four-hour blob. The general exam is 50 items in 2 hours . The specific exam is 40 items in 2 hours . Each clock starts when that appointment starts. Minutes do not transfer. A candidate who finishes the general 20 minutes early does not receive 140 minutes on the specific. Treat each sitting as its own paced job, the way a yoke scan, a penetrant dwell, and a radiographic exposure each have their own clocks.

This section is the test-day operating procedure. Chapter 1 already locked the application, identification, and retake rules. Here those same published facts become a timing plan : how many minutes you actually own per item, which computer-based testing ( CBT ) rules steal minutes if you ignore them, and why an eight-minute fight with one formula is how people fail a paper they otherwise knew.

Why pacing is part of the method

Level II work is timed in the shop. Magnetic particle particles settle, penetrant dwell expires, film density depends on exposure time, and an ultrasonic calibration that takes twenty minutes on a simple block is a process-control failure. The written papers test whether you can still apply the method when a countdown is visible.

Candidates who can recite flux leakage but spend eight minutes rearranging an inverse-square fraction will leave three unread procedure items on the table. Those three items are often faster, more certain points than the algebra you are wrestling. ASNT does not publish a single fixed cut score for NDT Level II. Cut scores are set with the Angoff method or item response theory (IRT) . ASNT states that exams typically fall in the 70%–80% range. You cannot stop at a private target such as "35 correct" and walk out. You also cannot assume every item is scored.

ASNT's psychometrics information says pretest items may exist and are unscored . ASNT does not publish how many pretest items appear on a given NDT Level II form. Do not invent a count, and do not try to guess which stems are pretest because they "look weird." Answer every item as if it counts. Flagging every odd calculation as unscored is how people skip scored procedure items.

The 2.4-minute and 3.0-minute budgets

Do the division before you sit, not at item 12.

  • Paper Items Clock Average Clean-item first pass Review reserve
  • General 50 120 minutes 2.4 min/item about 1.5–2.0 minutes 15–20 minutes
  • Specific 40 120 minutes 3.0 min/item about 2.0–2.5 minutes 15–20 minutes

120 ÷ 50 = 2.4 minutes per general item. 120 ÷ 40 = 3.0 minutes per specific item. The specific is not easier because it has fewer questions. It is denser: codes, applications, and techniques, often with a table in the stem. The extra 0.6 minute per item is there so you can read the printed table , not so you can daydream.

A usable first-pass rule:

If you can close the item from a definition or a one-step lookup in under two minutes , answer and move.

If the item is a two-step calculation you can set up cleanly, spend the budgeted 2.4 or 3.0 minutes , then decide.

If you are still algebraically lost at four minutes , flag , choose a reasoned option if you must, and return .

The hard stop this chapter teaches: do not spend eight minutes on one formula if three procedure items remain . Eight minutes is more than three general-item budgets (3 × 2.4 = 7.2 minutes). Procedure, lighting, orientation, and code-application items are often faster once you actually read the stem. A flagged formula can be recovered in the review window. An unread item cannot.

Worked leftover math you should be able to do without a scratch-paper panic:

After 20 general items in 40 minutes you are exactly on the 2.4-minute average and have 80 minutes for the remaining 30 items (about 2.7 minutes each if you keep moving).

After 20 general items in 60 minutes you are 12 minutes behind (20 × 2.4 = 48; you spent 60). The remaining 30 items have 60 minutes, which is exactly 2.0 minutes each — enough for definitions, not enough for another eight-minute derivation. Flag every remaining calculation immediately.

On the specific paper, 10 items in 40 minutes is already slower than 3.0 minutes each. You still have 30 items and 80 minutes (about 2.7 minutes each). That is still workable if you stop writing shop essays in your head and start applying the printed excerpt.

Flag, skip, return

Pearson VUE and ASNT authorized-center CBT lets you flag an item, skip ahead, and return before you submit. Use that tool the way you use a hold point on a traveler.

Suggested pass structure for the 50-item general :

Pass 1 (about 70–80 minutes). Answer every item you can close in one or two steps. Flag multi-step calculations, two-variable geometry, and any stem that quotes a table you have not yet parsed.

Pass 2 (about 20–25 minutes). Return only to flagged items. Recalculate from the given numbers, not from memory of a shop chart.

Pass 3 (about 15–20 minutes). Review flagged leftovers, check unit slips (inches versus millimeters, minutes versus seconds, footcandles versus lux), and confirm you did not leave a blank.

For the 40-item specific , stretch Pass 1 a little because each stem may include a code excerpt. The average 3 minutes is permission to read the given acceptance line before you pick, not permission to argue with the edition your shop uses.

Never submit with blanks if the interface allows a selection. An unanswered item cannot be correct. A reasoned flag-and-return guess can be. There is no published ASNT bonus for leaving a hard item empty.

Breaks do not pause the clock

ASNT's published test-day rules allow a break, but the timer does not pause . Tell the proctor before you leave the room. A ten-minute restroom trip in a 120-minute general sitting is more than four item budgets (10 ÷ 2.4 ≈ 4.2 general items). Plan fluids and meals so you do not spend the 2.4-minute average in the hallway. If you stacked general and specific the same day, eat and use the restroom between appointments, not during a running clock.

Official CBT rules that protect the sitting

Strategy only works if you are allowed to sit. ASNT's examinations page and Pearson VUE rules are the gate. These are the published facts that interact with the clock; they are not folklore.

Where and in what language. Delivery is in-person CBT at Pearson VUE or an ASNT authorized exam center (AEC) . There are no walk-in tests. All examinations are in written US English . An online translation dictionary is available for NDT terminology in Korean, Mandarin, Spanish, UK English, and Arabic . ASNT does not guarantee that each translation matches the intended usage in context. Use the dictionary for a word you do not know; do not rebuild the physics from a single translated noun, and do not spend a 2.4-minute budget looking up every article.

Before you travel. Review the computer-based testing (CBT) and calculator demo ASNT links from the examinations page. ASNT provides a scientific calculator . Do not bring your own programmable unit. Learn the demo keys — parentheses, exponent, square root — so a 2.4-minute inverse-square item does not become an eight-minute button hunt. The tutorial at the center is not the time to discover how the calculator handles (36/20)^2 .

Arrival and identification. Arrive at least 30 minutes before the scheduled time. More than 15 minutes late may mean refused admission and a forfeited sitting. Bring two original, valid IDs whose names match the certification application and the MyASNT record: a primary government-issued ID with name and signature, and a secondary ID with a name and signature or photo. Expect a photo at the testing center. Photocopies, expired cards, and a married name on only one document fail this check. Name mismatches belong in an email to certifications@asnt.org at least 72 hours before the exam, not at the check-in desk.

Half-day planning. ASNT tells candidates to plan at least half a day for the test. Two papers at two hours each are four hours of testing. Add 30 minutes early, check-in, photo, the CBT tutorial, a possible gap between appointments, and travel. That is easily five to six hours at the center. Do not book a job walk at noon after a 9:00 a.m. general and a back-to-back specific.

Scoring honesty: no fixed cut, possible pretest items

Hold two facts so you do not invent a private pass rule:

ASNT does not publish one fixed public pass percentage. Typical exams fall in the 70%–80% range because of Angoff or IRT, not because Recommended Practice No. SNT-TC-1A 's 70% per-test / 80% composite is the central CBT cut.

Pretest items may appear and are unscored. There is no published count for how many, if any, sit on your form. You cannot identify them. You cannot skip "the last five" as if they were experimental.

Because you cannot see a running score, the operational target is complete the paper . Bank sure items first. Return to calculations. Do not stop at a guessed 36 out of 50.

Worked timing scenarios

Scenario 1 — The eight-minute inverse-square. At minute 18 of the general, a candidate is still rearranging I₁/I₂ = (D₂/D₁)² for a source move from 20 in to 36 in. Three unread items sit in the same block: a magnetization-orientation definition, a Type I lighting requirement, and an employer-vision item. Eight minutes is already more than three 2.4-minute budgets. Flag the calculation, answer the three procedure items, and return with a clean equation and the on-screen calculator.

Scenario 2 — Specific-exam table. The 40-item specific gives about 3 minutes per item. A stem prints a 1/8 in undercut limit for a thickness band. The candidate's shop uses 1/32 in. Spending the first minute arguing with memory wastes the budget. Spend that minute reading the printed row , apply it, flag if the thickness band is ambiguous, and move.

Scenario 3 — Same-day stack. A candidate books an 8:00 a.m. general and an 11:00 a.m. specific at Pearson VUE. Arrival at 7:30, photo, tutorial, 50 items, a short break, then 40 items. That is exactly why ASNT says plan at least half a day . Eating lunch during the specific clock is a self-inflicted time loss.

Scenario 4 — Dictionary overuse. A candidate whose first language is Spanish opens the translation dictionary on every noun. The dictionary is a terminology aid for Korean, Mandarin, Spanish, UK English, and Arabic, not a second exam language. Budget one lookup per stubborn word , then answer from the method physics. The paper remains US English.

Scenario 5 — Calculator demo skipped. A candidate meets a skip-distance item at minute 90 of the general, discovers the on-screen calculator, and spends five minutes finding the exponent key. That is how a 2.4-minute item becomes an eight-minute item. The demo existed so this would not happen.

Memorize a one-line card the night before (do not smuggle a cheat sheet into the room): 50 in 120 ≈ 2.4 min; 40 in 120 ≈ 3 min; flag at four minutes; never eight minutes on one formula; two IDs; 30 minutes early; half a day; English plus the five-language dictionary. That is the entire timed strategy.