Study guide

9.3 PT Procedures, ASTM/ASME Standards, and Acceptance

ASNT NDT Level II Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Certification Paths: SNT-TC-1A, CP-189, and ASNT Central Certification 1.3 Level I vs Level II vs Level III Responsibilities 1.4 Application, Scheduling, Identification, and Retake Rules

2 Eligibility, Fees & Recertification

2.1 Training Hours, Experience Days, and Documentation 2.2 Vision, Practical Exams, and the Employer's Written Practice 2.3 Fees, Validity, Recertification, and 529 Funding

3 NDT Fundamentals & Method Selection

3.1 What NDT Can and Cannot Detect 3.2 Surface vs Subsurface and Method Selection Logic 3.3 Product Forms: Welds, Castings, Forgings, Wrought, In-Service Damage

4 MT Principles & Flux Fields

4.1 Magnetism, Permeability, and Flux Leakage 4.2 Flux Fields: Circular vs Longitudinal 4.3 How Discontinuities Distort Magnetic Fields

5 MT Magnetization & Demagnetization

5.1 Magnetization by Electric Current: Contact, Prods, Central Conductor 5.2 Selecting the Proper Magnetization Method: Coils, Yokes, Current Type 5.3 Demagnetization Procedures and Residual Field Limits

6 MT Equipment, Evaluation & Process Control

6.1 MT Equipment, Media, and Lighting 6.2 Types of Discontinuities Detected by MT 6.3 MT Evaluation Techniques 6.4 Quality Control of MT Equipment and Processes

7 PT Principles & Materials

7.1 PT Principles: Capillarity, Wetting, and Process Physics 7.2 Penetrant Types, Methods, and Sensitivity Classes 7.3 Developers and Process Sequence Controls

8 PT Method Selection & Process Control

8.1 Selecting the Appropriate PT Method for the Job 8.2 Surface Preparation, Dwell, Removal, and Lighting 8.3 Station Equipment, Process Control, and Safety

9 PT Indications, Evaluation & Standards

9.1 Relevant, Nonrelevant, and False Indications 9.2 Evaluating Indication Size, Shape, and Persistence 9.3 PT Procedures, ASTM/ASME Standards, and Acceptance

10 RT Principles & Exposure Technique

10.1 Radiation Physics: X-ray vs Gamma, Energy, and Attenuation 10.2 Exposure Geometry, Inverse Square Law, and Geometric Unsharpness 10.3 Radiographic Technique: kV, mA-min, Screens, and Source Selection

11 RT Image Quality, Processing & Indications

11.1 Film, Digital Detectors, Density, and Image Quality Indicators 11.2 Darkroom Facilities, Processing, and Artifact Control 11.3 Radiographic Indications, Discontinuities, and Defects

12 RT Product Discontinuities & Radiation Safety

12.1 Manufacturing Processes and Associated Discontinuities 12.2 Radiological Safety: Time, Distance, Shielding, and Dose Limits 12.3 RT Procedures, Codes, and Viewing Practice

13 UT Principles & Techniques

13.1 Sound Propagation, Modes, Velocity, and Wavelength 13.2 Transducers, Couplant, and Straight-Beam Techniques 13.3 Angle-Beam Techniques, Snell's Law, and Skip Distance

14 UT Calibration & Base Material

14.1 Calibration Blocks, DAC, TCG, and Sensitivity Setting 14.2 Evaluating Base-Material Product Forms 14.3 Evaluating Weldments

15 UT Bonds, Detection & Evaluation

15.1 Evaluating Bonded Structures 15.2 Discontinuity Detection and Characterization 15.3 General Evaluation, Sizing, and Acceptance Logic

16 VT Scope, Vision & Lighting

16.1 Purpose and Scope of VT 16.2 Elements of Vision 16.3 Elements of Lighting 16.4 Contrast and Resolution

17 VT Optics, Equipment & Discontinuities

17.1 Optics and Magnification 17.2 VT Equipment: Direct, Remote, and Measuring Tools 17.3 Visual Appearance of Discontinuities

18 VT Evaluation, Codes & Employer Topics

18.1 Evaluation and Reporting 18.2 Codes, Standards, and Specifications 18.3 Employer-Specific Topics and Written-Practice Controls

19 Specific Exam: Codes & Sectors

19.1 How the Specific Exam Differs from the General Exam 19.2 General Industry Codes and Procedure Use 19.3 Pressure Equipment Sector Codes (ASME, NBIC, API context)

20 Specific Exam: Applications & Techniques

20.1 Applications: Matching Method to Product Form and Access 20.2 Technique Selection and Essential Variables 20.3 Procedure Compliance, Reporting, and Acceptance/Rejection

21 Exam Strategy & Maintenance

21.1 Timed 50+40 Strategy and CBT Rules 21.2 Common Traps by Method 21.3 Weak-Area Review and Recertification Planning

9.3 PT Procedures, ASTM/ASME Standards, and Acceptance

Key Takeaways Explain This Topic AI

A PT procedure's essential variables typically include penetrant type, method, dwell, removal, developer, lighting, and temperature — changing one without approval is a new technique.

ASTM E1417 is a practice for performing PT; AMS 2644 qualifies materials; ASME Section V Article 6 is the ASME technique article; construction codes such as ASME Section VIII and AWS D1.1 supply acceptance.

The Level II applies the approved procedure and the named acceptance standard; the Level III or the owner writes or approves those documents.

A complete report records location, size, type (class and shape), disposition, and any sketch or photograph the procedure requires.

The specific exam is a procedure-reading test: apply the printed paragraph, do not substitute a shop habit or a different code family.

Last updated: August 2026

The ASNT NDT Level II liquid penetrant general exam lists Inspection Procedures and Standards as official PT topic 4. The specific exam (General Industry or Pressure Equipment) spends its codes , applications , and techniques items in the same neighborhood: can you read a procedure paragraph and do what it says? This section is where those two papers meet.

A procedure is the controlling work instruction for a given part family. It is not a textbook chapter and it is not "the way we have always washed Method A." ASTM E1417 , AMS 2644 , ASME Section V, Article 6 , and a construction code can all be invoked by that procedure. They are not interchangeable, and none of them is an ASNT-published accept/reject table for every job.

Essential variables the Level II must actually run

An essential variable is a process setting that, if changed beyond the procedure's allowed range, can change detectability. Industry PT procedures — and the technique articles they invoke — treat at least the following as essential. Learn the list; the specific exam prints a subset and asks what you may not freelance.

Essential variable What the procedure will typically lock Why it matters

Type Type I fluorescent or Type II visible (color contrast) Sensitivity, lighting, and what you are allowed to see change with type

Method A water-washable, B lipophilic post-emulsified, C solvent-removable, D hydrophilic post-emulsified Removal physics change; the wrong wash can strip a tight crack or leave background

Dwell Penetrant contact time (and often a maximum) at the stated temperature Too short underfills tight openings; too long can dry or stain

Removal Water pressure/temperature/time, emulsifier concentration and contact, or solvent-wipe steps This is the step that creates false background or erases relevant bleed

Developer Dry, aqueous wet, nonaqueous wet (solvent), or water-soluble, plus dwell before interpretation Developer family changes indication growth and contrast

Lighting UV-A intensity and ambient visible light for Type I; white-light intensity for Type II You cannot classify or measure what the procedure's light levels do not support

Temperature Part and process temperature band Standard penetrants are qualified in a limited band; outside it, dwell and removal change

Related settings the procedure may also treat as essential: penetrant sensitivity class (Type I), pre-clean method, drying temperature and time, emulsifier type, water-wash nozzle distance, and the evaluation window after developer application. If the document lists it as essential, the Level II does not "improve" it on the floor.

Industry practice numbers you will see attributed to ASTM E1417 and ASME Section V, Article 6 — not as ASNT secrets — include a common part-temperature band on the order of 40–125 °F (5–52 °C) for standard penetrants, Type I UV-A at the surface often ≥ 1000 μW/cm² with ambient visible light held down (frequently ≤ 20 lux / 2 fc ), and Type II white light often ≥ 1000 lux (100 fc) . Special penetrants and qualified high- or low-temperature procedures exist; they are used only when the approved document says so. If a stem prints 50–100 °F and a 10-minute dwell, those printed numbers win for that item.

Changing type, method, dwell, removal, developer, lighting, or temperature outside the allowed range is not a field tweak. It is a different examination . That change belongs to the Level III or the owner who approves procedure revisions.

Which document does which job

Mixing these four families is the most expensive topic-4 mistake on both papers.

Document Job What it is not

ASTM E1417 Standard practice for liquid penetrant testing: process, controls, materials handling, lighting, temperature, system performance Not, by itself, the accept/reject table for a vessel weld or a bridge connection

AMS 2644 Aerospace materials specification that qualifies penetrants, emulsifiers, and developers by type, method, and sensitivity Not a construction-code acceptance standard and not a license to skip E1417 process control

ASME Section V, Article 6 ASME technique article for liquid penetrant examination when the referencing ASME construction code requires Section V Not the pressure-vessel acceptance table; Article 6 tells you how to examine, not which indication fails a Division 1 vessel

Construction / product code (examples: ASME Section VIII , AWS D1.1 , a customer aerospace or API specification) Acceptance : linear/rounded limits, spacing, zones, repair rules Not a substitute for the technique article or for a qualified material

How they stack on a real job:

The owner or Level III writes a procedure that invokes a practice ( E1417 and/or ASME V Article 6 ), names AMS 2644 -qualified (or otherwise approved) materials when the contract requires that list, and points to an acceptance standard ( ASME VIII , AWS D1.1 , etc.).

The Level II runs the essential variables and evaluates indications against that acceptance standard.

If the contract is AWS structural welding, AWS D1.1 workmanship limits apply when the procedure says they do — not the vessel table from last week's job.

If the contract is an ASME pressure vessel, Section V Article 6 is the usual technique reference and Section VIII (or the applicable book) supplies acceptance. Article 6 does not "include" the VIII table just because both say ASME.

Other documents appear in stems. ASTM E165 is a companion PT test-method / practice family; treat it as another how-to , not as ASME VIII. Employer written practices written to SNT-TC-1A or CP-189 govern personnel qualification; they do not replace E1417 or the construction code. ASNT Certification Services LLC does not publish a universal PT accept/reject table that outranks the code on the drawing.

Level II applies; Level III or the owner writes

Keep the responsibility line as clean as it was in the Level I / II / III chapter.

The Level II :

Selects the approved procedure that matches the part, specification, and method

Verifies essential variables (type, method, dwell, removal, developer, lighting, temperature) before production interpretation

  • Classifies indications, measures them by the procedure's method, and applies the named acceptance standard
  • Reports results, including required sketches or photographs
  • Stops the examination when the procedure cannot be followed or when no acceptance criterion is provided

The Level III (or the owner / Responsible Level III named in the written practice):

  • Writes or approves the procedure and the acceptance standard to be used
  • Approves changes to essential variables
  • Resolves interpretation disputes and "the code is silent" cases

Specifies process-control pieces, material qualifications ( AMS 2644 or equivalent), and any demonstration on a qualification block

The Level II does not rewrite dwell because the line is backed up. The Level II does not swap Type II visible for Type I fluorescent to "see better" without an approved alternative. The Level II does not borrow ASME VIII limits on an AWS D1.1 fillet because the VIII table is the one they memorized. The Level III does not stand at the booth and classify every stain on a production shift — that is the Level II's job under the document the Level III already approved.

On the ASNT central credential, the written exams test this model. Your employer's practical still belongs to the employer's written practice. Those are parallel facts, not a reason to ignore the printed procedure on the specific exam.

Reporting: location, size, type, sketch or photo

If it is not recorded, it was not a controlled examination. ASME Section V, Article 6 and ASTM E1417 both expect a record that lets another qualified person reconstruct what was done. A report that says only "PT OK" fails topic 4 even when the part is clean.

Typical report content the procedure will require — teach this list, then use whatever the stem prints:

  • Procedure identification and revision
  • Part identity, material, specification, and area examined (including datum or weld ID)
  • Penetrant type , method , material designations or batch, and dwell
  • Removal method and, where applicable, water or emulsifier parameters
  • Developer family and developer dwell / evaluation window
  • Lighting measurements (UV-A and ambient, or white light) and temperature
  • Process-control status for that shift (system-performance piece, lighting check)

For each recorded indication: location , size (and what was measured — indication vs opening), type (relevant / nonrelevant / false; linear / rounded), and disposition (accept, reject, repair, re-examine)

Sketch or photograph when the procedure or the customer requires it — especially for rejectable or borderline relevant indications and for specific-exam stems that say "document as required"

Technician identification, qualification level, and date

"Type" on a report means the classification and shape , not only Type I versus Type II. Location is specific enough that a repair welder can find the site. Size includes units and the measurement rule. A photo that is required and missing is an incomplete examination, not a paperwork afterthought.

Specific-exam crossover: reading a PT procedure paragraph

The 40-item specific exam is not a second copy of capillary-action theory. A typical stem drops a procedure paragraph on the page and asks what the Level II must do. Work it like a closed-book shop traveler.

Example of the kind of paragraph you will see (values are illustrative of how stems are written, not a universal ASNT table):

Liquid penetrant examination shall be Type I , Method C , sensitivity as listed on the approved material. Penetrant dwell 10 minutes minimum. Remove excess penetrant with a clean, dry cloth followed by a cloth slightly moistened with solvent remover; do not spray solvent on the part as the primary removal step. Apply nonaqueous developer. Interpret between 10 and 60 minutes after developer application. UV-A at the surface shall be at least 1000 μW/cm² ; ambient visible light shall not exceed 20 lux . Part temperature 50–100 °F . Linear relevant indications longer than 1/8 in (3 mm) are rejectable per the referencing specification.

How a Level II reads that paragraph:

Type I / Method C / nonaqueous developer / 10-minute dwell / 50–100 °F / stated lighting are essential. Use them. Do not switch to Method A because the hose is closer.

Solvent is a wipe , not a flood. Spraying the part as the first removal step violates the paragraph even if AMS 2644 lists a spray can.

Interpretation before 10 minutes or after 60 minutes is outside the window.

Acceptance is the printed 3 mm linear rule in this stem, not AWS D1.1 from memory and not "any linear is rejectable."

Report location, the measured length and how it was taken, linear/relevant, and reject if the length exceeds 3 mm. Attach a sketch or photo if that same procedure later requires it.

If a different stem invokes ASME Section V, Article 6 technique plus ASME Section VIII acceptance, you do not import the 3 mm sentence from the example above. You apply the VIII sentence the stem prints. If a stem names AWS D1.1 , you apply D1.1. Document crossover is the skill: match the invocation .

Realistic exam scenarios

A Level II shortens Method D emulsifier contact because the line is late. Essential variable changed. The examination is not the approved procedure. Stop and get a Level III / owner disposition; do not "make up time" in the wash.

A candidate treats AMS 2644 as the vessel reject table and fails a 2 mm rounded pore because the penetrant can was sensitivity Level 3. AMS 2644 qualified the can. ASME VIII (or the named spec) decides the pore.

A report lists "PT accept" with no location, no size, no class, and no lighting or temperature. Even if the part is clean, the record cannot be reconstructed. Topic 4 fails the report.

A specific-exam paragraph requires Type I, Method C, and a 10-minute dwell. The candidate runs Type II, Method A, 5 minutes because that is the shop's in-service kit. Wrong examination. The correct answer is to apply the printed essential variables and the named acceptance standard.

Topic 4 rewards document hygiene: know which paper controls materials, which controls technique, which controls acceptance, who is allowed to change the paragraph, and what the report must carry. That is the whole standard's job on this credential.