1.1 Current Exam Facts

ASNT NDT Level III Basic Examination Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Level III Role and Certification Path 1.3 Eligibility, Fees, Scheduling, and Retakes 1.4 Study Strategy and Exam-Day Approach

2 Chapter 2: Materials Fundamentals for NDT

2.1 Ferrous Metals and Iron-Carbon Phases 2.2 Non-Ferrous Metals and Alloys 2.3 Mechanical Properties and Crystal Structure

3 Chapter 3: Manufacturing Processes

3.1 Casting Processes and Cast Discontinuities 3.2 Forging, Rolling, and Forming 3.3 Extrusion, Drawing, and Machining 3.4 Heat Treatment Effects

4 Chapter 4: Welding and Joining Processes

4.1 Fusion Welding Processes 4.2 Weld Metal and HAZ Discontinuities 4.3 Brazing, Soldering, and Mechanical Joining

5 Chapter 5: Discontinuity Classification

5.1 Inherent Discontinuities 5.2 Processing Discontinuities 5.3 Service Discontinuities

6 Chapter 6: Specific Discontinuity Types

6.1 Cracks and Fracture Modes 6.2 Porosity, Inclusions, and Lack of Fusion 6.3 Laminations, Seams, Laps, and Undercut 6.4 Relevant vs Non-Relevant Indications

7 Chapter 7: NDT Method Selection and Inspection Planning

7.1 Method Selection Principles 7.2 Surface vs Volumetric Methods 7.3 Inspection Planning and Flaw Expectations

8 Chapter 8: Ultrasonic and Radiographic Testing

8.1 Ultrasonic Testing Principles and Applications 8.2 UT Limitations, Calibration, and Evaluation 8.3 Radiographic Testing Principles and Applications 8.4 RT Limitations, Image Quality, and Safety Basics

9 Chapter 9: Magnetic Particle, Liquid Penetrant, and Visual Testing

9.1 Magnetic Particle Testing 9.2 Liquid Penetrant Testing 9.3 Visual Testing

10 Chapter 10: Electromagnetic, Leak, Acoustic Emission, and Infrared Testing

10.1 Electromagnetic / Eddy Current Testing 10.2 Leak Testing 10.3 Acoustic Emission Testing 10.4 Thermal / Infrared Testing

11 Chapter 11: Specialty Methods and Method Comparison

11.1 Neutron Radiography 11.2 Magnetic Flux Leakage 11.3 Method Comparison and Supplemental Examinations

12 Chapter 12: SNT-TC-1A Recommended Practice

12.1 SNT-TC-1A Overview and Written Practice 12.2 SNT-TC-1A Training and Experience 12.3 SNT-TC-1A Examinations and Recertification

13 Chapter 13: CP-189 Standard Practice

13.1 CP-189 Overview and Scope 13.2 CP-189 Mandatory Requirements 13.3 SNT-TC-1A vs CP-189 Comparison

14 Chapter 14: CP-105 and NDT Training Programs

14.1 CP-105 Purpose and Topical Outlines 14.2 Developing and Approving NDT Training 14.3 OJT, Mentoring, and Instructor Oversight

15 Chapter 15: Building and Managing Certification Programs

15.1 Building Qualification and Certification Programs 15.2 Administering Examinations and Evaluating Competency 15.3 Program Audits and Managing Certifications

16 Chapter 16: Codes, Standards, Procedures, and Quality

16.1 Interpreting Codes, Standards, and Specifications 16.2 Developing and Approving NDT Procedures 16.3 Acceptance Criteria and Quality Control 16.4 External Audits and Inspection Documentation

1.1 Current Exam Facts

Key Takeaways Explain This Topic AI

The ASNT NDT Level III Basic exam has 135 multiple-choice questions, a 4-hour time limit, and a 70% passing score.

Basic is a method-agnostic gateway: you must pass Basic plus at least one Method exam for initial ASNT NDT Level III certification.

Exams are computer-based, closed-book, delivered in English at Pearson VUE centers or ASNT-approved Authorized Exam Centers (AECs).

For exams after 1 January 2026, study SNT-TC-1A 2024 and CP-189 2024 (they replace the 2020 editions as recommended references).

The Basic outline spans NDT certification, application of many methods (AE, ET, IR, LT, MFL, MT, NR, PT, RT, UT, VT), training, materials/process technology, and codes/standards/procedures.

Last updated: July 2026

1.1 Current Exam Facts

Quick Answer: The ASNT NDT Level III Basic exam is 135 multiple-choice questions in 4 hours , with a 70% passing score. It is a closed-book , computer-based , English-language exam delivered through Pearson VUE or ASNT Authorized Exam Centers (AECs) . Basic is the method-agnostic gateway required (with at least one Method exam) for initial ASNT NDT Level III certification.

The American Society for Nondestructive Testing (ASNT) operates the ASNT NDT Level III certification program under accreditation requirements that emphasize fair, reliable, and valid exams. Understanding the exam’s format, role, and content map is the first practical step before you invest weeks of study in standards, materials science, and method selection.

Official exam information, topic lists, and scheduling rules live on ASNT’s certification site: ASNT NDT Level III Examinations . Always verify fees, editions, and topic wording against the current page—ASNT periodically updates outlines and reference editions.

What the Basic Exam Is (and Is Not)

Basic is not a method exam in UT, RT, MT, or any single technique. It tests whether you can function as a Level III across the shared body of knowledge that every method specialist still needs:

How personnel qualification and certification programs work (especially SNT-TC-1A and CP-189 )
How materials, manufacturing processes, and discontinuities drive inspection strategy
How the major NDT methods compare so you can advise, plan, and oversee work beyond one specialty

For initial certification, ASNT requires you to pass the NDT Basic examination and one or more Method examinations . Method exams go deep into a single method (for example UT or RT). Basic is the common foundation that sits in front of those deep dives.

Attribute Basic exam fact
Items 135 multiple-choice
Time 4 hours
Passing score 70%
Delivery Computer-based testing (CBT)
Book policy Closed-book
Language English (ASNT provides a multi-language NDT terminology translation dictionary as an aid)
Venues Pearson VUE network and approved AECs
Practical exam None for ASNT NDT Level III CBT path
Role Gateway for initial Level III; method-agnostic

There is no practical hands-on exam on the ASNT NDT Level III computer-based path described by ASNT—your demonstration of technique skill is assumed to come from eligibility experience and method-exam knowledge, not a lab station on exam day.

ANAB Context and Why It Matters

ASNT describes its Level III exams as designed and audited to meet ANAB accreditation standards for certification programs. For exam preparation, the practical takeaway is not the accreditation logo itself—it is that the exam is standards-based , topic-mapped , and psychometrically controlled . You should study to the published competencies, not to rumor or to a single employer’s written practice alone.

Content Map: Three Roughly Equal Knowledge Areas

ASNT’s published Basic outline is organized into competency domains (NDT Certification; Application of NDT Methods; NDT Training; Materials Science & Process Technology; Codes, Standards, Specifications, & Procedures). For study planning, candidates usually regroup that outline into three roughly equal teaching blocks :

1. Personnel qualification standards (SNT-TC-1A 2024 & CP-189 2024)

Expect questions on qualification vs. certification, written practices/programs, training and experience logic, examinations (general, specific, practical as used in employer programs), recertification concepts, audits, and the recommended practice vs. mandatory standard distinction.

Critical edition note: For candidates taking the Basic exam after 1 January 2026 , ASNT states that recommended reference materials have changed: the 2020 editions of SNT-TC-1A and CP-189 are replaced by the 2024 editions. Do not study only an older bookshelf copy if your exam date is after that cutoff.

2. Materials, processes, and discontinuities

You must connect product form and process (casting, forging, rolling, welding, heat treatment, in-service damage, and related processes) to likely discontinuity types , then to which NDT methods can detect them. The Level III is expected to characterize flaw types based on materials and processes, monitor manufacturing changes, and support failure investigations—not merely memorize crack definitions.

3. NDT method overview

ASNT’s Basic outline lists application competencies across methods such as AE, ET, IR, LT, MFL, MT, NR, PT, RT, UT, and VT . You are not expected to pass a full Method exam inside Basic, but you are expected to:

Advise appropriate methods for products and scenarios
Select techniques, develop/validate procedures, and plan inspections from expected flaw types
Differentiate relevant vs non-relevant indications
Know when supplemental methods are warranted
Understand calibration/verification and process-audit concepts at a Level III oversight level
Official Competency Domains (How ASNT Labels Them)

Use the official domain names when you self-audit your notes:

NDT Certification — qualification/certification processes, written programs, exams, managing qualifications, administering exams, competency evaluation, program audits, method-specific qualification requirements

Application of NDT Methods — method advice, client requirements, supplier capability, technique selection, procedure development/validation, inspection planning, calibrations, visual inspection, process-based inspection, relevant/non-relevant indications, interpretation/evaluation, documentation, supplemental methods, process/equipment audits, monitoring method changes

NDT Training — develop/approve training, instruction, OJT, mentoring, refresher identification, instructor oversight

Technical Knowledge in Materials Science & Process Technology — flaw types by materials/processes, manufacturing trends/changes, product research support, failure investigations, destructive sampling decisions, method/technique evaluation

Codes, Standards, Specifications, & Procedures — interpret requirements, develop/approve procedures and work instructions, QC protocols, acceptance criteria support, external audit participation

Those five domains fold into the three study blocks above; the exam cares about applied judgment , not isolated trivia.

Closed-Book and Computer-Based Implications

Because the exam is closed-book , you cannot open SNT-TC-1A or a procedure manual during the test. That changes how you study:

Memorize relationships (recommended vs mandatory; experience/education tradeoffs; method strengths/limits) more than page numbers

Build comparison charts you can reconstruct from memory
Practice scenario questions: “Given process X and material Y, which method and why?”

CBT delivery means you work on a secure computer at an approved center. ASNT points candidates to Pearson VUE demos for the testing interface and calculator behavior. Budget half a day including check-in; arrive early with required IDs (covered in Section 1.3).

Gateway Role in the Certification Path
Think of Basic as the shared filter for Level III maturity: Eligibility (education + NDT experience)
↓
Application + fees (MyCert)
↓
Approval letter → schedule within 1 year
↓
Pass BASIC (method-agnostic) + Pass ≥1 METHOD exam
↓
Initial ASNT NDT Level III certification (digital badge / 5-year cycle)

You can hold multiple methods later, but initial certification always includes Basic. Recertification rules differ (method exams only may be used in recertification paths)—that distinction is exam-relevant for program-management questions and is expanded in Section 1.2.

High-Yield Facts to Lock Before Deeper Chapters
135 / 4 hours / 70% — format triad
Closed-book CBT , English, Pearson VUE / AECs
Basic + ≥1 Method for initial certification
2024 editions of SNT-TC-1A and CP-189 for exams after 1 Jan 2026
Methods in the outline include AE, ET, IR, LT, MFL, MT, NR, PT, RT, UT, VT
Study across standards + materials/discontinuities + method overview , not just one of the three

The rest of this study guide expands each block with exam-oriented depth. Section 1.2 clarifies the Level III role and career path; Section 1.3 covers eligibility, fees, scheduling, and retakes; Section 1.4 gives a concrete study and exam-day strategy.