Study guide
12.3 SNT-TC-1A Examinations and Recertification
ASNT NDT Level III Basic Examination Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Level III Role and Certification Path 1.3 Eligibility, Fees, Scheduling, and Retakes 1.4 Study Strategy and Exam-Day Approach
2 Chapter 2: Materials Fundamentals for NDT
2.1 Ferrous Metals and Iron-Carbon Phases 2.2 Non-Ferrous Metals and Alloys 2.3 Mechanical Properties and Crystal Structure
3 Chapter 3: Manufacturing Processes
3.1 Casting Processes and Cast Discontinuities 3.2 Forging, Rolling, and Forming 3.3 Extrusion, Drawing, and Machining 3.4 Heat Treatment Effects
4 Chapter 4: Welding and Joining Processes
4.1 Fusion Welding Processes 4.2 Weld Metal and HAZ Discontinuities 4.3 Brazing, Soldering, and Mechanical Joining
5 Chapter 5: Discontinuity Classification
5.1 Inherent Discontinuities 5.2 Processing Discontinuities 5.3 Service Discontinuities
6 Chapter 6: Specific Discontinuity Types
6.1 Cracks and Fracture Modes 6.2 Porosity, Inclusions, and Lack of Fusion 6.3 Laminations, Seams, Laps, and Undercut 6.4 Relevant vs Non-Relevant Indications
7 Chapter 7: NDT Method Selection and Inspection Planning
7.1 Method Selection Principles 7.2 Surface vs Volumetric Methods 7.3 Inspection Planning and Flaw Expectations
8 Chapter 8: Ultrasonic and Radiographic Testing
8.1 Ultrasonic Testing Principles and Applications 8.2 UT Limitations, Calibration, and Evaluation 8.3 Radiographic Testing Principles and Applications 8.4 RT Limitations, Image Quality, and Safety Basics
9 Chapter 9: Magnetic Particle, Liquid Penetrant, and Visual Testing
9.1 Magnetic Particle Testing 9.2 Liquid Penetrant Testing 9.3 Visual Testing
10 Chapter 10: Electromagnetic, Leak, Acoustic Emission, and Infrared Testing
10.1 Electromagnetic / Eddy Current Testing 10.2 Leak Testing 10.3 Acoustic Emission Testing 10.4 Thermal / Infrared Testing
11 Chapter 11: Specialty Methods and Method Comparison
11.1 Neutron Radiography 11.2 Magnetic Flux Leakage 11.3 Method Comparison and Supplemental Examinations
12 Chapter 12: SNT-TC-1A Recommended Practice
12.1 SNT-TC-1A Overview and Written Practice 12.2 SNT-TC-1A Training and Experience 12.3 SNT-TC-1A Examinations and Recertification
13 Chapter 13: CP-189 Standard Practice
13.1 CP-189 Overview and Scope 13.2 CP-189 Mandatory Requirements 13.3 SNT-TC-1A vs CP-189 Comparison
14 Chapter 14: CP-105 and NDT Training Programs
14.1 CP-105 Purpose and Topical Outlines 14.2 Developing and Approving NDT Training 14.3 OJT, Mentoring, and Instructor Oversight
15 Chapter 15: Building and Managing Certification Programs
15.1 Building Qualification and Certification Programs 15.2 Administering Examinations and Evaluating Competency 15.3 Program Audits and Managing Certifications
16 Chapter 16: Codes, Standards, Procedures, and Quality
16.1 Interpreting Codes, Standards, and Specifications 16.2 Developing and Approving NDT Procedures 16.3 Acceptance Criteria and Quality Control 16.4 External Audits and Inspection Documentation
12.3 SNT-TC-1A Examinations and Recertification
Key Takeaways Explain This Topic AI
Level I and Level II qualification under SNT-TC-1A typically requires general, specific, and practical examinations appropriate to the method and level.
Recommended grading is commonly at least 70% on each examination with a composite score of at least 80%—confirm the current edition and Written Practice.
Re-examination rules live in the Written Practice; failures require controlled retesting rather than informal ‘oral overrides’ without records.
Recommended maximum certification periods are on the order of five years for Level I/II/III in modern SNT-TC-1A language; recertification may use evidence of continuing satisfactory performance and/or re-examination as the Written Practice allows.
The Level III develops, administers, or approves examinations and protects exam integrity; CP-189 later tightens some of these ideas into mandatory requirements without changing the employer-as-certifier model.
Last updated: July 2026
12.3 SNT-TC-1A Examinations and Recertification
Quick Answer: Under SNT-TC-1A, Level I and Level II candidates typically pass general , specific , and practical examinations. Recommended grading is often ≥70% on each exam and ≥80% composite . Re-examination follows the Written Practice. Recertification occurs before the certification period ends—commonly a maximum of five years in modern SNT-TC-1A recommendations—using evidence of continuing satisfactory performance and/or re-examination as the Written Practice defines. The Level III develops, administers, or approves exams and protects their integrity. CP-189 (Chapter 13) will contrast by making many parallel requirements mandatory once invoked.
Training and experience make a candidate eligible . Examinations make competence demonstrable . Recertification keeps the certificate alive without pretending people never change jobs, procedures, or skill levels.
The Three Classic Examination Types (Level I and Level II)
SNT-TC-1A describes Level I and Level II qualification examinations as comprising three complementary parts:
1. General examination
Broad method knowledge: principles, capabilities/limitations, basic equipment, discontinuities the method finds, terminology
- Often closed-book relative to employer procedures (the Written Practice states open/closed rules)
- Proves the person understands the method , not only one plant’s work instruction
- 2. Specific examination
- Employer equipment, procedures, techniques, product forms, codes/specs as used on the job
- Proves the person can operate inside this program
- Highly valuable to auditors because it ties certification to actual work instructions
- 3. Practical examination
- Hands-on demonstration: setup, calibration, examination, recording, and evaluation tasks appropriate to level
- Samples real skill, not only multiple-choice knowledge
- Should use representative specimens and acceptance tasks defined or approved under the program
Exam type Primary question it answers
General Do you know the method?
Specific Do you know our procedures and equipment?
Practical Can you actually perform the work?
Exam trap: “only a general exam” or “only a practical demo with no written tests” is usually not the full SNT-TC-1A Level I/II model unless a special limited path is carefully defined—and even then the Written Practice must be honest about scope.
Level III examinations under employer programs
For Level III, SNT-TC-1A-oriented Written Practices typically require a basic examination (broad NDT/program knowledge) plus a method examination, with training/experience/education documented. In practice, many employers accept or require ASNT NDT Level III Basic and Method exams as the basic/method examination path. That is why you are studying this guide: the ASNT Basic exam is both a central credential exam and a demonstration of the knowledge SNT-TC-1A expects of Level III technical authorities.
Level III candidates are not “above” examination discipline. They are expected to design systems that make examinations meaningful for everyone else.
Grading Concepts
A high-yield SNT-TC-1A grading recommendation that appears repeatedly in Basic-style items:
- Minimum of 70% on each examination (general, specific, and practical)
- Composite score of at least 80%
Why both matter:
A candidate who scores 95%, 95%, and 45% should not pass on “average heroics” if each exam has a floor
A candidate who scores 72%, 72%, and 72% may clear each floor yet still miss a composite requirement if the Written Practice uses the classic composite rule
Always confirm exact grading language in the current SNT-TC-1A edition and the employer Written Practice. Some programs impose stricter floors. None should invent undocumented oral waivers after a failed practical “because the shop is busy.”
Score records
Keep:
- Exam identifiers and versions
- Dates, proctors/administrators, and Level III approvals as required
- Raw and composite scores
- Pass/fail decision and any re-examination history
Missing grade records are a classic external-audit finding.
Re-Examination
When a candidate fails one or more parts, the Written Practice should state:
- Which parts must be retaken
- Waiting periods or remedial training expectations before retest
- Whether failed practicals require new specimens or the same set under controlled conditions
- How many attempts are allowed before a broader reset of training requirements
Level III judgment: re-examination is a quality control event, not a punishment lottery. If many candidates fail the specific exam, maybe the training did not cover the actual procedures. If many fail the practical, maybe the practical is unrealistic—or the OJT is weak. Use failure patterns to improve the program.
Recertification Intervals and Methods
Certification is not permanent. SNT-TC-1A recommends a maximum certification period —for modern (including 2024) practice language, a common Basic-exam fact is a five-year maximum from the date the certifying authority signs the certification record for Level I, II, and III unless the Written Practice sets a shorter period. Always verify the published edition for exact wording.
- Why five years is a conceptual ceiling, not a slogan
- Procedures, codes, and equipment change
- Skills decay without practice
- Vision and performance need periodic confirmation
- Customers expect time-bounded certificates
- Recertification methods (conceptual menu)
Written Practices typically allow one or more of the following approaches as SNT-TC-1A recommends and the employer selects:
Evidence of continuing satisfactory performance
Documented work in the method at the certified level, with performance that meets program expectations. This is not “the person still works here,” and it is not a rubber stamp. It should be defensible: activity logs, acceptable audit results, lack of competence incidents, and Level III/management review as required.
Re-examination
Full or partial retesting (general/specific/practical as the Written Practice requires for recertification). Used when performance evidence is insufficient, when the person has been inactive, when procedures changed substantially, or when the program simply requires periodic retest.
Combinations and special cases
Some programs mix continuing performance with targeted exams, or require additional training after inactivity. Limited certifications recertify within their limited scope.
Inactivity and interrupted certification
If someone has not performed the method for a long period, continuing-performance evidence may be weak even if the calendar certificate has not expired. Strong Written Practices address inactivity, suspension, and reinstatement. Level IIIs should not stretch “satisfactory performance” to cover people who have not touched the method in years without additional verification.
Employer certification vs ASNT central recertification
Do not mix calendars:
Employer SNT-TC-1A certificates recertify under the Written Practice
ASNT NDT Level III credentials recertify under ASNT’s central rules (which may emphasize Method exams for recertification after initial Basic + Method certification)
A person can hold both. Losing one does not automatically lose the other unless a contract or Written Practice ties them together.
Level III Responsibilities for Exam Development and Administration
Under SNT-TC-1A employer programs, the Level III is the technical guardian of examinations:
- Develop and approve exam content
- General questions aligned to method knowledge at the correct level
- Specific questions drawn from current procedures, equipment, and codes used on the job
- Practical tasks that sample real work without becoming an unfair obstacle course or a trivial demo
- Administer or oversee administration
- Control of exam security (no circulating answer keys in the break room)
- Qualified proctors where allowed; Level III approval where required
- Fair timing, materials, and specimen control for practicals
- Accommodation and integrity issues handled consistently
- Evaluate results and recommend certification
- Score accurately against Written Practice criteria
- Recommend certification only when training, experience, vision, and exams all meet requirements
- Advise management; certification is typically an employer act supported by Level III technical recommendation
- Continuous improvement
- Retire compromised items
- Update specific exams when procedures revise
- Align practical specimens with product forms actually inspected
- Use failure analytics to fix training gaps
Outside agency Level IIIs may perform these functions when the Written Practice authorizes the arrangement and documents responsibilities—still with the employer as certifying authority.
Brief Contrast Preview: SNT-TC-1A vs CP-189 (Full Comparison in Chapter 13)
You do not need the full side-by-side yet, but Basic loves this single distinction:
- Theme SNT-TC-1A CP-189 (preview)
- Document type Recommended practice ANSI standard with mandatory requirements once invoked
- Employer Written Practice Required to implement the program Also required; less “soft” on minimums
Training/experience Recommended minimums; tailoring concepts exist Minimums are mandatory and not to be reduced
Examinations General/specific/practical framework; Level III technical control Examinations administered or approved by Level III with strict documentation expectations
Certifying authority Employer Still employer (not ASNT-by-default)
Remember: CP-189 is not “SNT-TC-1A but only for nuclear,” and it does not eliminate the Written Practice. It tightens the bolts.
Program Integrity Scenarios (Level III Thinking)
Use these mental cases on exam day:
Specific exam never updated after procedure rewrite → certification no longer proves job-ready competence.
Practical exam always uses the same three easy plates → candidates learn the specimens, not the method.
Recertification by “signature only” with no performance evidence or exam → hollow certificates.
Level II grades another Level II’s certification exam without Level III program control → authority breakdown (especially sensitive under stricter standards).
Employer claims SNT-TC-1A compliance but has no Written Practice → fundamental failure of the model.
- High-Yield Traps for This Section
- Omitting one of general / specific / practical for standard Level I/II paths
- Accepting a composite average that hides a failed part when the recommendation requires each exam ≥70%
Treating five-year recertification as optional folklore rather than a recommended maximum interval in modern practice
- Confusing employer recertification with ASNT central recertification rules
- Believing Level IIIs invent exam results without records
- Jumping to full CP-189 comparison details before mastering SNT-TC-1A’s recommended-practice framing
- Closing the SNT-TC-1A Arc
Across Chapter 12 you should now be able to defend:
- What SNT-TC-1A is — recommended practice for employer-based qualification/certification
- What controls the local program — the Written Practice
- How people become eligible — training, experience, education credit concepts, limited scope, vision
- How competence is proven and renewed — general/specific/practical exams, grading, re-exams, recertification
- Who owns technical quality — the NDT Level III under employer authority
Chapter 13 moves to CP-189 , where many of these ideas reappear with mandatory force. Keep SNT-TC-1A’s flexible recommended-practice character clear so the contrast is sharp rather than muddy.