Study guide

1.3 Longitudinal vs. Circular Magnetization Fields

ASNT NDT Level III Magnetic Particle Testing MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Magnetization Principles and Physics

1.1 Magnetic Fields, Poles, and Domain Theory 1.2 The Hysteresis Loop and B-H Curve 1.3 Longitudinal vs. Circular Magnetization Fields 1.4 Magnetic Flux Leakage Theory and Defect Detectability 1.5 Probability of Detection, Reliability, and Technique Validation

2 Chapter 2: Direct Contact and Longitudinal Magnetization Techniques

2.1 Head Shots and Direct Contact Techniques 2.2 Prod Techniques and Localized Circular Magnetization 2.3 Longitudinal Coil Magnetization and Calculations

3 Chapter 3: Central Conductor, Yoke, and Vector Magnetization

3.1 Central Conductor (Induced Current) Techniques 3.2 Electromagnetic Yokes and Portable Field Techniques 3.3 Multidirectional and Vector Magnetization

4 Chapter 4: Magnetic Particles and Carrier Vehicles

4.1 Particle Characteristics: Physical, Magnetic, and Optical Properties 4.2 Dry Powder Systems and Application Techniques 4.3 Wet Particle Systems: Water vs. Petroleum Distillate Vehicles 4.4 Bath Concentration, Centrifuge Settling, and Maintenance

5 Chapter 5: Electrical Waveforms, Equipment, and Demagnetization

5.1 Current Waveforms and Penetration: AC, HWDC, FWDC, and 3-Phase FWDC 5.2 Stationary Wet Horizontal Benches and Portable Units 5.3 Demagnetization Principles, Methods, and Residual Field Limits

6 Chapter 6: Quality Control, Calibration, and System Performance

6.1 Lighting and Viewing Environment Requirements 6.2 Field Indicators and System Performance Check Devices 6.3 Equipment Calibration and Periodic Verifications 6.4 Bath Contamination, Water Break, and Cleanliness Tests

7 Chapter 7: Inherent and Primary Processing Discontinuities

7.1 Ingot and Casting Discontinuities 7.2 Wrought and Primary Forming Discontinuities 7.3 Secondary Processing Discontinuities: Machining and Heat Treating

8 Chapter 8: Service Discontinuities and Indication Evaluation

8.1 Service Discontinuities: Fatigue, Stress Corrosion, and Creep 8.2 Welding Discontinuities and Weldment Examination 8.3 Indication Classification: Relevant, Non-Relevant, and False 8.4 MT Reports, Records, and Documentation Review

9 Chapter 9: Industry Codes, Standards, and Acceptance Criteria

9.1 ASME Section V, Article 7 (Mandatory MT Requirements) 9.2 ASTM E1444 vs. ASTM E709 vs. ISO 9934 9.3 Acceptance Criteria in Fabrication Codes: ASME VIII, AWS D1.1, and API 1104 9.4 Reviewing Client Requirements and Product-Form MT Specifications

10 Chapter 10: Level III Responsibilities, Procedures, Training, and Program Oversight

10.1 Level III Duties, SNT-TC-1A, and ANSI/ASNT CP-189 10.2 Preparation and Qualification of MT Written Procedures 10.3 Safety, Environmental, and Health Considerations in MT 10.4 Developing and Delivering MT Training Programs 10.5 Developing and Administering MT Qualification Examinations 10.6 MT Program Audits, Supplier Oversight, and Personnel Performance

1.3 Longitudinal vs. Circular Magnetization Fields

Key Takeaways Explain This Topic AI

Ampere's right-hand rules govern the spatial geometry of induced magnetic fields: straight conductors generate concentric circular flux paths, whereas coiled conductors generate axial longitudinal flux paths.

Circular magnetization contains all flux lines entirely within the part without external poles, making it highly sensitive to longitudinal (axial) discontinuities but blind to transverse flaws.

Longitudinal magnetization establishes distinct north and south poles at opposite ends of the test piece, producing external leakage flux in air and sensitive detection of transverse discontinuities.

The length-to-diameter (L/D) ratio is the governing factor in longitudinal coil magnetization, where low L/D ratios generate intense self-demagnetizing fields that counteract the applied field.

Last updated: September 2026

  • 1.3 Longitudinal vs. Circular Magnetization Fields
  • Ampere's Right-Hand Rules for Conductors and Coils

The spatial distribution and orientation of induced magnetic flux lines are strictly governed by electromagnetic laws formulated by André-Marie Ampère and Hans Christian Oersted. In non-destructive testing, Ampere's right-hand rules provide the geometric foundation for predicting field direction, external pole formation, and defect detection orientation.

Right-Hand Rule for Straight Conductors (Direct Contact & Central Conductors)

When electric current passes along a straight electrical conductor or directly through a solid test component:

Application: Grasp the conductor with the right hand such that the extended thumb points in the direction of conventional electric current flow (from positive [ + ] [+] [ + ] to negative [ − ] [-] [ − ] ).

Result: The four curled fingers wrap around the conductor, pointing in the precise direction of the concentric, circular magnetic flux lines ( B ⃗ \vec{B} B ) induced within and around the conductor.

Right-Hand Rule for Solenoids and Encircling Coils

When current passes through a helical coil or wrapped cable:

Application: Wrap the curled fingers of the right hand around the coil circumference in the direction that conventional current flows through the turns.

Result: The extended thumb points along the central coil axis in the direction of the internal longitudinal magnetic flux lines, designating the North pole formed where flux lines exit the coil bore into the surrounding air.

Circular Magnetization: Mechanics, Characteristics, and Applications

Circular magnetization establishes a closed, cylindrical magnetic flux path wherein lines of force travel in concentric circles around the axis of current flow.

Generation Techniques

Direct Contact (Head Shot): The test part is clamped between two copper or lead-faced contact plates on a stationary horizontal wet bench, and high-amperage current passes directly through the part from headstock to tailstock.

Central Conductor (Induced Circular Field): A non-magnetic conductive bar (copper rod) or flexible heavy-duty cable is threaded through the central bore of a hollow, tubular, or ring-shaped component. Current passes through the central conductor, inducing a circular magnetic field in the surrounding ferromagnetic tube without requiring direct electrical contact with the part.

Prods: Two handheld copper or aluminum contact electrodes are pressed against the surface of a plate or weld, passing localized current through the metal to create a localized circular field.

Field Distribution in Solid vs. Hollow Components

Solid Cylindrical Bar of Radius R R R (Direct Contact):

Inside the bar ( r ≤ R r \le R r ≤ R ): Magnetic flux density increases linearly from zero at the exact center axis to a maximum value at the outer circumference: B ( r ) = μ I r 2 π R 2 B(r) = \frac{\mu I r}{2\pi R^2} B ( r ) = 2 π R 2 μ I r ​ Because current is distributed uniformly across the cross-sectional area, the enclosed current at radius r r r scales with r 2 r^2 r 2 , while the circular path length scales with r r r , resulting in a linear ramp.

Outside the bar in air ( r ≥ R r \ge R r ≥ R ): Flux density decays inversely with distance from the center: B ( r ) = μ 0 I 2 π r B(r) = \frac{\mu_0 I}{2\pi r} B ( r ) = 2 π r μ 0 ​ I ​

Hollow Cylinder with Central Conductor:

When current I I I passes through a central conductor, 100% of the current is enclosed by the inside diameter (ID) of the surrounding tube.

Therefore, the magnetic field is maximum at the inside diameter surface (ID) and decreases progressively toward the outside diameter surface (OD). This unique distribution makes central conductors exceptionally powerful for detecting critical ID bore cracks in tubular components.

Absence of External Poles

The defining diagnostic feature of circular magnetization is that no external magnetic poles are formed at the ends of the part . Because the magnetic lines of force form continuous, closed concentric loops contained entirely within the geometry of the component (or concentric air layers), flux lines never exit the metal into ambient space under normal conditions.

Leakage Field and Defect Detection Orientation

Because circular flux lines travel in closed circumferential paths:

Longitudinal (Axial) Discontinuities: Flaws running parallel to the axis of current flow (such as forging seams, pipe rolling seams, and longitudinal fatigue cracks) cut across the circular flux lines at an angle of 90 ∘ 90^\circ 9 0 ∘ . This creates severe magnetic flux disruption, forcing flux out into the air to generate powerful, sharp leakage fields and distinct particle indications.

Transverse (Circumferential) Discontinuities: Flaws running perpendicular to the axis of current flow lie completely parallel to the circular flux lines. The lines of force simply travel along both sides of the flaw without interruption, producing zero flux leakage. Circular magnetization is completely blind to transverse flaws.

Longitudinal Magnetization: Mechanics, Characteristics, and Applications

Longitudinal magnetization establishes a magnetic field that runs parallel to the longitudinal axis of the test component.

Generation Techniques

Encircling Rigid Coils: The part is placed inside a multi-turn copper coil (typically 3 to 5 turns).

Flexible Cable Wraps: Heavy insulated welding cables are wrapped around large forgings, structural beams, or piping (typically 3 to 4 turns).

Electromagnetic Yokes: An articulated AC or DC yoke is placed on the surface, inducing longitudinal flux between its two contact legs.

External Pole Formation and Flux Path

Unlike circular fields, longitudinal magnetization generates definite North and South external magnetic poles at opposite ends of the test piece:

Lines of force travel lengthwise through the body of the part.

Upon reaching the end face, the flux lines are forced to exit the metal matrix into ambient air, establishing a strong external North pole .

The flux lines loop through external space over the outside of the part and re-enter the opposing end face, establishing an external South pole , before completing their closed loop through the interior of the part.

Discontinuity Detection Orientation

Transverse Discontinuities: Cracks oriented perpendicular to the long axis of the part (such as circumferential fatigue cracks in shafts, transverse weld cracks, and cross-axis thermal fractures) intersect the longitudinal flux lines at 90 ∘ 90^\circ 9 0 ∘ . This produces massive flux leakage fields and bright, sharp particle indications.

Longitudinal Discontinuities: Axial cracks running parallel to the long axis lie parallel to the longitudinal flux lines. Flux lines pass freely on either side without obstruction, resulting in zero leakage field. Longitudinal magnetization is completely blind to longitudinal seams and axial cracks.

The L / D L/D L / D Ratio and Self-Demagnetizing Fields

The primary physical challenge in longitudinal coil magnetization is the phenomenon of self-demagnetization .

Physics of the Demagnetizing Field ( H d H_d H d ​ )

When longitudinal magnetization establishes external North and South poles at the ends of a part, these exposed pole concentrations act as sources of an internal reverse magnetic field. Inside the metal, the magnetic influence of these poles exerts a force from the North pole back toward the South pole—directly opposing the external applied magnetizing force ( H a p p l i e d H_{applied} H a ppl i e d ​ ) from the coil: H n e t = H a p p l i e d − H d H_{net} = H_{applied} - H_d H n e t ​ = H a ppl i e d ​ − H d ​

The magnitude of this self-demagnetizing field is proportional to the internal flux density and a geometric demagnetizing factor ( N d N_d N d ​ ): H d = N d ⋅ B μ 0 H_d = N_d \cdot \frac{B}{\mu_0} H d ​ = N d ​ ⋅ μ 0 ​ B ​

The Critical Role of Length-to-Diameter ( L / D L/D L / D ) Ratio

The value of the demagnetizing factor N d N_d N d ​ is strictly governed by the ratio of the part's length ( L L L ) to its effective diameter ( D D D ):

High L / D L/D L / D Ratio ( L / D ≥ 4 L/D \ge 4 L / D ≥ 4 or 5): The North and South poles are widely separated in space. Their mutual reverse interaction is weak ( N d N_d N d ​ is small), and the internal net field approaches the applied coil field. Standard empirical formulas (such as N I = 45 , 000 L / D N I = \frac{45,000}{L/D} N I = L / D 45 , 000 ​ for low fill-factor coils) operate accurately.

Low L / D L/D L / D Ratio ( L / D < 2 L/D < 2 L / D < 2 or 3): The opposing poles are physically close together. The self-demagnetizing field ( H d H_d H d ​ ) becomes enormous, neutralizing a vast portion of the coil's magnetizing effort. In parts with L / D < 2 L/D < 2 L / D < 2 , standard coil magnetization is virtually impossible because the internal net field cannot reach the knee of the B-H curve.

Level III Engineering Solutions for Low L / D L/D L / D Components

When tasked with inspecting short, squat parts ( L / D < 2 L/D < 2 L / D < 2 , such as bearing races, short gear blanks, or disc forgings) in a longitudinal coil, the Level III must implement specific mitigation techniques:

Pole Extenders (Cheater Blocks): Low-carbon soft steel blocks of matching cross-section are placed intimately against both ends of the test part. This physically moves the external poles out to the ends of the extension blocks, artificially increasing the effective L / D L/D L / D ratio of the assembly to > 4 >4 > 4 .

Magnetic Clamping / Closed Yoke Circuits: Placing the part between the contact poles of an electromagnetic yoke or laminated core, creating a closed, high-permeability iron return circuit that eliminates air-pole formation.

Alternative Technique Selection: Utilizing circular central conductor magnetization or multidirectional fields rather than open longitudinal coil shots.

Vector Addition of Fields and Multidirectional Magnetization

In advanced industrial inspection, locating both longitudinal and transverse discontinuities in a single processing sequence is highly desirable.

Vector Addition Principles

Magnetic fields are vector quantities possessing both magnitude and spatial direction. When two orthogonal magnetic fields—such as a circular field ( B ⃗ c \vec{B}_c B c ​ ) and a longitudinal field ( B ⃗ l \vec{B}_l B l ​ )—are applied simultaneously to the same volume of material, they do not exist as separate entities; they combine vectorially to produce a single resultant vector field ( B ⃗ R \vec{B}_R B R ​ ): B ⃗ R = B ⃗ c + B ⃗ l \vec{B}_R = \vec{B}_c + \vec{B}_l B R ​ = B c ​ + B l ​

Resultant Flux Magnitude: B R = B c 2 + B l 2 B_R = \sqrt{B_c^2 + B_l^2} B R ​ = B c 2 ​ + B l 2 ​ ​

Resultant Field Angle ( θ \theta θ ): θ = arctan ⁡ ( B c B l ) \theta = \arctan\left(\frac{B_c}{B_l}\right) θ = arctan ( B l ​ B c ​ ​ )

When a circular field and a longitudinal field of equal magnitude are applied together, the resulting vector field forms a helical (spiral) flux path oriented at 45 ∘ 45^\circ 4 5 ∘ across the surface of the cylinder. This 45 ∘ 45^\circ 4 5 ∘ helical field intersects both longitudinal and transverse cracks at an angle of 45 ∘ 45^\circ 4 5 ∘ , which satisfies the minimum angular threshold for flux leakage detection.

True Multidirectional (Three-Phase / Two-Phase) Systems

In modern stationary wet horizontal benches equipped with multidirectional capability:

Two or three separate power circuits are energized in rapid succession or with phase-shifted waveforms (e.g., a three-phase system where Phase 1 drives a circular head shot, Phase 2 drives a central conductor, and Phase 3 drives a longitudinal coil, or two AC phases shifted by 90 ∘ 90^\circ 9 0 ∘ or 120 ∘ 120^\circ 12 0 ∘ ).

This produces a rapidly rotating vector magnetic field that sweeps through 360 ∘ 360^\circ 36 0 ∘ of orientation across the part during bath application.

Level III Balancing Requirement: To achieve uniform omnidirectional sensitivity, the Level III must carefully balance the magnetizing currents of both circuits using quantitative flux indicators (such as Quantitative Quality Indicator [QQI] slotted shims) placed at 0 ∘ , 45 ∘ , 0^\circ, 45^\circ, 0 ∘ , 4 5 ∘ , and 90 ∘ 90^\circ 9 0 ∘ orientations.

Summary Comparison Table: Circular vs. Longitudinal Magnetization

Feature / Characteristic Circular Magnetization Longitudinal Magnetization

Typical Generation Equipment Direct contact head shot, prods, central conductor Encircling rigid coil, cable wrap, magnetic yoke

Magnetic Flux Geometry Concentric closed circles around current axis Parallel lines running lengthwise through part

Formation of External Poles None (flux contained within part / closed loops) Definite North and South poles at part ends

Detectable Discontinuity Orientation Longitudinal (axial) flaws parallel to current Transverse (circumferential) flaws perpendicular to axis

Undetectable Flaw Orientation Transverse flaws parallel to flux lines Longitudinal flaws parallel to flux lines

Self-Demagnetization Problem Non-existent (no external poles to generate H d H_d H d ​ ) Severe for low L / D L/D L / D ratios ( L / D < 3 L/D < 3 L / D < 3 )

Field Strength Distribution (Solid) Zero at center; maximum at outer surface Relatively uniform across internal cross-section

Field Strength (Central Conductor) Maximum at inside bore surface (ID) Uniform along axis; unaffected by bore presence

Key Operational Parameter Amperage per unit diameter ( I / D I/D I / D ) Ampere-turns ( N I N I N I ) and L / D L/D L / D ratio

Loading diagram... Circular vs. Longitudinal Magnetization Comparison