Study guide

5.2 Manufacturing Processes & Heat Treatment

ASNT NDT Level III Certification Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

1.1 Exam Structure, Basic + Method Exams & Scoring 1.2 How to Study & Test-Taking Strategy

2 Certification Programs & Documents

2.1 SNT-TC-1A: The Employer-Based Recommended Practice 2.2 CP-189, CP-105, NAS 410 & ISO 9712 2.3 Level I/II/III Responsibilities, Eligibility & Recertification

3 Level III Duties, Ethics & Program Oversight

3.1 Level III Duties & the Written Practice 3.2 Ethics & Professional Conduct 3.3 Audits, Records & Certification-Program Control

4 NDT Training & Personnel Qualification

4.1 Training Program Design & Curriculum 4.2 Examination Development & Grading 4.3 Practical/Hands-on Oversight, Competency Evaluation & Vision Requirements

5 Materials Science & Manufacturing Processes

5.1 Metallurgy & Material Properties 5.2 Manufacturing Processes & Heat Treatment 5.3 Product Forms & Service Conditions

6 Discontinuities & Their Origins

6.1 Discontinuity Classes 6.2 Typical Discontinuities by Product Form

7 Codes, Standards & Procedures

7.1 Codes vs Standards vs Specifications 7.2 Written Procedures & Technique Sheets 7.3 Documentation, Reporting & Acceptance Criteria

8 Visual & Penetrant Testing (VT, PT)

8.1 Visual Testing (VT) 8.2 Penetrant Testing — Process & Materials 8.3 PT Applications, Capabilities & Limitations

9 Magnetic Particle & Electromagnetic Testing (MT, ET)

9.1 Magnetic Particle Testing 9.2 Eddy Current Testing 9.3 Related Electromagnetic Methods & Comparison

10 Ultrasonic Testing (UT)

10.1 UT Physics 10.2 Equipment & Techniques 10.3 Calibration, Applications, Capabilities & Limitations

11 Radiographic Testing (RT)

11.1 RT Physics 11.2 Technique & Image Quality 11.3 Radiation Safety, Applications, Capabilities & Limitations

12 Other Methods & Method Selection

12.1 Leak Testing & Acoustic Emission 12.2 Infrared/Thermal & Other Methods 12.3 Method Selection & Comparison Matrix

5.2 Manufacturing Processes & Heat Treatment

Key Takeaways Explain This Topic AI

Casting produces porosity, shrinkage cavities, hot tears (restrained contraction), and cold shuts, plus coarse grain that hampers UT.

Forging causes laps and internal bursts, while rolling flattens inclusions into laminations parallel to the plate surface and creates seams.

Every fusion weld has three zones: weld metal, the crack-prone heat-affected zone (HAZ), and unaffected base metal.

Normalizing (air cool) refines grain, quench-and-temper hardens then restores toughness, and case hardening gives a hard surface over a tough core.

Quench cracks come from severe rapid cooling, and tempering reduces the brittleness of as-quenched martensite.

Last updated: July 2026

From Raw Metal to Finished Part

Every discontinuity a Level III chases was either born in the material (inherent), created while the part was made (processing), or produced in service. This section covers the processing side: casting, deformation (forging, rolling, extrusion), welding, and machining, followed by the heat treatments that reset a part's microstructure. Knowing how each process works lets you predict the defect type, its likely orientation, and the method most likely to find it.

Casting

Casting pours molten metal into a mold and lets it solidify. Common routes include sand casting, investment (lost-wax) casting, die casting, and continuous casting. Because the metal solidifies from the mold wall inward and shrinks as it cools, castings carry a distinctive family of discontinuities:

Gas porosity - rounded voids from dissolved gas coming out of solution.

Shrinkage cavities - jagged voids where late-freezing metal was starved of feed.

Hot tears - cracks that form when solidifying metal is restrained and cannot contract freely .

Cold shut - a weak seam where two metal streams met without fusing.

Inclusions and misruns - trapped slag or sand, or incompletely filled sections.

Castings also solidify with a coarse, dendritic grain that scatters ultrasound, so radiography is often preferred for internal casting volume while UT is applied with care.

Deformation Processing: Forging, Rolling, Extrusion

Forging shapes hot metal with compressive blows or pressure. Done well it closes internal voids and produces a favorable grain flow that follows the part contour, improving fatigue life. Its characteristic defects include laps (metal folded over onto itself and not welded, a surface-connected fold), internal bursts (from working a cold interior too fast), and flakes (hydrogen-related internal cracks).

Rolling squeezes ingot or slab between rolls into plate, sheet, bar, and structural shapes. Non-metallic inclusions and any residual pipe get flattened and stretched into laminations that lie parallel to the plate surface , which is the reason straight-beam UT is the standard plate check. Rolled bar and tube also show seams (elongated surface openings) and stringers (elongated inclusion trails).

Extrusion forces metal through a die to make a constant cross-section. Its discontinuities tend to be long and linear, following the working direction, much like seams.

Hot Working versus Cold Working

Deformation done above the recrystallization temperature is hot working ; it refines grain and needs less force but leaves scale and looser tolerances. Deformation below that temperature is cold working (cold rolling, drawing, cold forging). Cold work raises strength and hardness while lowering ductility , because it multiplies dislocations and work-hardens the metal. That tradeoff matters for inspection: a cold-worked surface can be more crack-sensitive, and heavily worked material may need a stress-relief or full anneal to restore ductility before further forming.

Welding and Weld Zones

Welding fuses parts with a localized molten pool, usually with filler metal. Common processes include SMAW (shielded metal arc, or stick), GTAW (gas tungsten arc, or TIG), GMAW (gas metal arc, or MIG), and SAW (submerged arc). Every fusion weld has three metallurgical regions.

Weld zone Definition Why it matters

Weld metal / fusion zone Melted and re-solidified metal Cast-like structure; porosity, slag, and cracks form here

Heat-affected zone (HAZ) Base metal that did NOT melt but whose microstructure was altered by heat Hardened and crack-prone; residual stress concentrates here

Base (parent) metal Unaffected material Reference for properties

The HAZ is the classic trouble spot. Rapid weld thermal cycles can quench the HAZ of a hardenable steel into brittle martensite, and combined with residual stress and dissolved hydrogen this produces hydrogen-induced (cold) cracking . Typical weld discontinuities include lack of fusion , lack of penetration , slag inclusions (elongated and irregular), porosity (rounded), undercut , and hot or cold cracks . A Level III reviews base-metal hardenability, preheat, and heat input precisely because they govern HAZ risk.

Machining and Finishing

Machining removes metal by cutting, turning, milling, or grinding. It does not usually create bulk flaws, but it leaves directional tool marks that must not be mistaken for cracks; machining marks are uniform and repetitive along the tool path , while cracks are irregular. Aggressive grinding can overheat a hardened surface and produce fine grinding cracks , and any machining leaves residual stress that can influence later cracking. This is why finishing history is reviewed before surface NDT.

Heat Treatment

Heat treatment deliberately changes microstructure and properties.

  • Process What it does Typical purpose
  • Annealing Heat, then very slow (furnace) cool Soften, relieve stress, improve machinability
  • Normalizing Heat above critical, then air cool Refine grain and produce a uniform structure after hot working
  • Quench and temper Rapid quench to harden, then reheat lower to temper High strength with restored toughness
  • Case hardening Carburize, nitride, induction- or flame-harden the surface Hard wear surface over a tough core
  • Stress relief Moderate heat below transformation Reduce residual and weld stress

Quenching forms hard, brittle martensite but generates steep thermal and transformation stresses; if they exceed local strength, quench cracks result, favored by sharp corners, section changes, and severe quenchants. Tempering then reheats the quenched steel to trade a little hardness for a large gain in toughness and reduced cracking risk. Normalizing after hot working refines and homogenizes grain, improving both properties and inspectability. Case hardening creates a hard, wear- and fatigue-resistant surface while leaving a ductile core, but the hardened case is itself crack-sensitive, another reason process history guides method choice.

Common trap: annealing and normalizing both soften steel and improve its structure, but they are not interchangeable. Annealing uses a slow furnace cool for maximum softness and machinability, while normalizing uses an air cool to refine grain and leave the steel slightly stronger and harder than the fully annealed condition.