Study guide

13.4 Quality Documentation, Reference Standards & Document Control

ASQ Certified Quality Inspector CQI

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Shop Mathematics & Algebra

1.1 Basic Shop Math & Precision Measurement 1.2 Basic Algebra & Technical Formulas 1.3 Measurement Systems & Unit Conversions

2 Chapter 2: Geometry & Applied Shop Trigonometry

2.1 Applied Shop Geometry 2.2 Right-Triangle Trigonometry 2.3 Shop Trigonometry Applications & Sine Bars

3 Chapter 3: Handheld Variable & Attribute Gages

3.1 Variable Hand Measuring Instruments 3.2 Fixed Attribute & Limit Gages 3.3 Transfer Gages & Precision Accessories 3.4 Special Gages: Electronic, Pneumatic, Force & Environmental Instrumentation

4 Chapter 4: Surface Plate Inspection, Optical Systems & CMMs

4.1 Gage Selection, Care & Environmental Control 4.2 Surface Plate Tools & Layout Inspection 4.3 Optical Comparators & Vision Systems 4.4 Coordinate Measuring Machines (CMM) & 3-2-1 Alignment 4.5 Gage Correlation & Cross-Instrument Agreement

5 Chapter 5: Surface Metrology, Calibration Systems & MSA

5.1 Surface Texture & Finish Measurement 5.2 Calibration Systems & NIST Traceability 5.3 Measurement System Analysis (MSA) & Gage R&R 5.4 Measuring Mass, Form & Profile, and Inclination

6 Chapter 6: Technical Drawing & Blueprint Reading

6.1 Engineering Drawing Structure & Conventions 6.2 Views, Sectioning & Feature Representation 6.3 Dimensions, Tolerancing & Fit Classifications

7 Chapter 7: Geometric Dimensioning & Tolerancing (GD&T)

7.1 GD&T Fundamentals & Datum Reference Frames 7.2 Material Condition Modifiers & Bonus Tolerance 7.3 Form & Orientation Tolerances 7.4 Location, Profile & Runout Tolerances

8 Chapter 8: Sampling Inspection & Acceptance Sampling Plans

8.1 Sampling Fundamentals & Operating Characteristic (OC) Curves 8.2 Attribute Sampling with ANSI/ASQ Z1.4 8.3 Variables Sampling with ANSI/ASQ Z1.9

9 Chapter 9: Inspection Planning, Processes & Material Disposition

9.1 Inspection Planning, Receiving & In-Process Inspection 9.2 First Article Inspection (FAI) & Documentation 9.3 Nonconforming Material Control & MRB 9.4 Inspection Errors & Human Factors 9.5 Product Traceability, Age Control & Shelf Life

10 Chapter 10: Materials Testing & Nondestructive Examination

10.1 Mechanical & Destructive Testing 10.2 Surface & Subsurface NDE Methods 10.3 Volumetric & Electromagnetic NDE Methods 10.4 Functionality, Force & Elastomer Hardness Testing 10.5 Software for Test Equipment & Software Validation

11 Chapter 11: Statistical Process Control & Process Capability

11.1 Statistics Fundamentals & Normal Distribution 11.2 Control Charts for Variables 11.3 Control Charts for Attributes & Run Rules 11.4 Process Capability & Performance Analysis

12 Chapter 12: Quality Systems, Continuous Improvement & Safety

12.1 The 7 Classic Quality Control Tools 12.2 Continuous Improvement & Problem-Solving Methodologies 12.3 Quality Management Systems, Audits & CAPA 12.4 Workplace Safety, Environmental Controls & PPE 12.5 Failure Mode and Effects Analysis (FMEA) & Fault Tree Analysis (FTA)

13 Chapter 13: Quality Fundamentals, Teams & Documentation Systems

13.1 Quality Improvement Concepts, Products & Processes 13.2 Audit Tools, Tracing Techniques & Audit Communication 13.3 Employees as Resources: Empowerment, Team Roles & Team Development 13.4 Quality Documentation, Reference Standards & Document Control

13.4 Quality Documentation, Reference Standards & Document Control

Key Takeaways Explain This Topic AI

The documentation hierarchy runs policy, procedures, work instructions, and records; ISO 9001:2015 calls all of it documented information and no longer requires a quality manual.

Documents are living and revision-controlled; records are historical evidence that are never revised, only corrected with a single line through the error plus initials and date.

Verifying the drawing and specification revision against the traveler or purchase order before inspecting is the single most commonly missed documentation step in an inspection department.

A PPAP submission covers 18 required elements and defaults to Level 3, with the Part Submission Warrant as the summary approval document; ISIR is the European and VDA equivalent of an initial sample report.

NIST is the United States national metrology institute and the source of measurement traceability, not a standards-writing body in the sense that ISO, ANSI, ASTM, and ASME are.

Last updated: September 2026

The Documentation Hierarchy

Quality documentation is conventionally described as a four-level pyramid, and although ISO 9001:2015 no longer prescribes this structure, the vocabulary is universal and the exam uses it.

Level Type Answers Example

1 Quality policy / manual Why and what — the organization's commitments and system scope Quality policy, system scope, process interaction map

2 Procedures Who does what, and when Control of nonconforming output; calibration control; internal audit

3 Work instructions How, in detail, at the point of use Inspection instruction for part 10025; CMM program setup sheet; gage operating instruction

4 Forms and records Evidence of what was actually done Inspection report, calibration certificate, traveler, NCR, control chart

ISO 9001:2015 replaced the older "documents and records" vocabulary with the single term documented information , and it no longer requires a quality manual or the six mandatory documented procedures that the 2008 edition demanded. Organizations retain whatever documented information is needed for the effective operation of their processes, plus the specific items the standard still names. Many organizations kept their manual anyway because customers ask for it. This is a currency point that generates exam questions.

Documents Versus Records

  • Documents Records
  • Purpose State intent — what we will do Provide evidence — what we did
  • Time orientation Present and future Past
  • Change behavior Revised and re-approved under document control Never revised ; corrected only

Control emphasis Ensure only the current revision is in use Ensure identification, legibility, retrievability, protection, and retention

The consequence for an inspector: an obsolete document in use is a serious finding because it means work is being performed to the wrong requirement. An altered record is a more serious finding still, because it destroys the evidence the entire system rests on.

Document Control

Document control, addressed in ISO 9001:2015 clause 7.5.3, exists to answer one question: is the person doing the work using the correct, current requirement?

Its required elements:

Approval before issue by an authorized person.

Review and re-approval when documents are updated.

Identification of changes and of current revision status — typically a revision letter or number plus a revision history block, and often a change bar or description of what changed.

Availability at the point of use , in a usable form.

Legibility and protection from loss of integrity, including control of electronic access.

Control of external documents — customer drawings, industry standards, supplier manuals — which the organization does not author but must ensure are current.

Prevention of unintended use of obsolete documents . Obsolete documents are removed from all points of use; any copy retained for legal or knowledge reasons is conspicuously marked as obsolete .

Retention and disposition per contract and regulation.

The Inspector's Revision Rule

The single most common documentation nonconformance found in inspection departments is inspecting to the wrong revision. Before measuring anything, verify that:

The drawing revision matches the revision called out on the traveler, work order, or purchase order.

The specification revisions referenced by the drawing are the ones in the shop's controlled set.

The inspection plan or control plan is at the revision that corresponds to that drawing.

Any customer-supplied document in use is the copy issued through document control, not a printout emailed to someone.

A rejection written against a superseded revision is an expensive, avoidable, and entirely visible error, and so is an acceptance written against one.

Uncontrolled copies are the recurring practical trap. A drawing printed at a workstation "for reference" is not maintained when the revision changes. Controlled distribution, watermarking, print-on-demand from the controlled system, or simply working from a screen connected to the live system are the standard countermeasures.

Good Documentation Practices

Records must be trustworthy years after they are written. The practices below are known as good documentation practices and are summarized by the ALCOA attributes: Attributable, Legible, Contemporaneous, Original, and Accurate . The extended form, ALCOA+, adds Complete, Consistent, Enduring, and Available.

Rules for making an entry:

Record at the time the activity occurs , not from memory at the end of the shift.

Use permanent ink ; never pencil.

Complete every field. Use "N/A" or a single diagonal line for fields that do not apply, so that a blank never becomes an unanswered question.

Sign or initial and date entries as required, using the individual's own credential — never someone else's stamp or login.

Record the actual observed value , including values outside the tolerance. A record showing only conforming values invites the flinching finding described in section 9.4.

Rules for correcting an error:

Draw a single line through the incorrect entry so the original remains legible.

Write the correct value adjacent to it.

Add the initials and date of the person making the correction.

Add a reason for the change where required by procedure or regulation.

Never obliterate, erase, use correction fluid, write over, or remove and replace a page.

Prohibited practices: back-dating, pre-signing a form for work not yet performed, recording expected values rather than observed ones, and using another person's stamp or electronic credential. Each is a records-integrity failure rather than an ordinary error, and in regulated sectors each is a serious regulatory finding.

For electronic records the same principles apply through system design: attributable individual logins, a time-stamped and non-editable audit trail that captures the old value, the new value, who changed it, when, and why, and the retention of the original as well as the corrected entry. In FDA-regulated environments these controls fall under 21 CFR Part 11 .

Key Inspection Documents

Document What it is Where it appears

Inspection plan / control plan Defines characteristics, methods, sample sizes, frequency, and reaction rules Drives every inspection performed

Traveler / router Sequences operations and captures sign-offs as the part moves The running record of a work order

First Article Inspection Report (FAIR) Full verification of every characteristic on a first production article; AS9102 Forms 1, 2, and 3 in aerospace Covered in depth in section 9.2

ISIR (Initial Sample Inspection Report) The European and VDA-family equivalent of an initial sample report, sometimes called an EMPB European automotive supply chains

PPAP (Production Part Approval Process) The AIAG package by which a supplier demonstrates it can consistently meet requirements North American automotive

Nonconformance report (NCR) Documents a nonconforming condition and its disposition Covered in section 9.3

Certificate of Conformance / Analysis Supplier attestation of conformance, or reported test values Covered in sections 9.1 and 9.5

PPAP in Slightly More Detail

The AIAG Production Part Approval Process requires 18 elements , including the design record, engineering change documents, customer approvals, design and process FMEAs, the process flow diagram, the control plan, measurement system analysis studies, dimensional results, material and performance test results, initial process studies, qualified laboratory documentation, an appearance approval report where applicable, sample product, master sample, checking aids, customer-specific requirements, and the Part Submission Warrant (PSW) that summarizes and certifies the submission.

Submission is governed by five levels defining how much of the package is actually sent to the customer versus retained at the supplier, with Level 3 as the default : warrant plus product samples plus complete supporting data. Level 1 is warrant only; Level 5 is review at the supplier's location.

The inspector's stake in PPAP is direct: the dimensional results , MSA studies , and initial process studies are all inspection department outputs, and an error in them delays part approval.

Reference Documents and Standards Bodies

Body of Knowledge topic IV.F.2 requires you to identify and use national and international standards and customer requirements as authorities supporting quality processes.

Body What it is CQI-relevant examples

ISO International Organization for Standardization ISO 9000 vocabulary, ISO 9001 quality management systems, ISO 19011 auditing, ISO/IEC 17025 laboratory competence, ISO 1 standard reference temperature, ISO 2859-1 and 3951 sampling

ANSI American National Standards Institute — accredits and coordinates US standards; it does not usually write them itself ANSI/ASQ Z1.4 attribute sampling, ANSI/ASQ Z1.9 variables sampling

ASQ American Society for Quality — develops quality standards, often issued jointly with ANSI The Z1.4 and Z1.9 sampling standards

ASTM ASTM International — materials, products, and test methods ASTM E8 tensile, E18 Rockwell, E10 Brinell, E23 Charpy, D2240 durometer, E29 rounding practice

ASME American Society of Mechanical Engineers ASME Y14.5 GD&T, ASME B89 series dimensional metrology, ASME B46.1 surface texture, the Boiler and Pressure Vessel Code

SAE / AS SAE International, including the aerospace AS series AS9100 aerospace quality systems, AS9102 first article inspection

NIST National Institute of Standards and Technology — the US national metrology institute Realizes and disseminates the SI units, supplies standard reference materials, and is the anchor of US measurement traceability

  • IEC International Electrotechnical Commission IEC 61025 fault tree analysis, IEC 60068 environmental testing
  • AIAG Automotive Industry Action Group MSA, PPAP, SPC, and (with VDA) FMEA reference manuals
  • IATF International Automotive Task Force IATF 16949 automotive quality management

"QS" QS-9000 , the legacy US automotive requirement issued by the Big Three Historical: superseded by ISO/TS 16949 and then by IATF 16949 . The BoK still lists it, so know what it was

MIL / DoD US military standards MIL-STD-130 item identification marking, MIL-STD-1916 sampling

The distinction the exam most reliably tests is NIST versus the standards developers . ISO, ANSI, ASTM, and ASME publish written specifications and test methods. NIST realizes and maintains the physical measurement standards and provides the traceability chain described in section 5.2. A calibration certificate is "traceable to NIST"; a sampling plan is "per ANSI/ASQ Z1.4."

Customer Requirements as an Authority

The customer's contract, purchase order, drawing, and specifications are requirements with the same force as any standard , and in most contracts they take precedence over general industry practice. Practical rules:

Flow-down. Customer requirements flow down to sub-tier suppliers. If the customer requires heat-lot traceability, the shop must impose it on its own material suppliers.

Order of precedence. Contracts commonly state a hierarchy — typically contract, then purchase order, then drawing, then referenced specifications. Read the clause; do not assume it.

Conflicts are escalated, never resolved on the floor. When a drawing and a referenced specification disagree, or a purchase order calls out a revision the drawing does not, the inspector stops and obtains written clarification . Choosing the interpretation that lets the part pass is a nonconformance in itself, and a verbal approval that never reaches the record is worth nothing during an audit.

Customer-specific requirements frequently override or supplement general standards — special characteristic symbols, mandated sample sizes, prescribed reporting formats, and required notification before process changes.

Retention

Retention periods are set by contract, regulation, and the organization's own policy, and they are frequently longer than people assume — commonly the life of the product plus a defined number of years in aerospace, medical, and defense work. Retention obligations cover retrievability and readability , not just storage: archived electronic data that no current system can open has not been retained in any meaningful sense.

Common Exam Traps

ISO 9001:2015 does not require a quality manual or the 2008 edition's six mandatory procedures.

Documents are revised; records are corrected. A record is never rewritten.

Single line through, initial, and date. Never erase, obliterate, use correction fluid, or replace a page.

Obsolete documents are removed , and any retained copy is conspicuously marked.

Verify the revision first. Inspecting to a superseded drawing invalidates the result whether the part passes or fails.

NIST provides traceability , it does not write GD&T or sampling standards.

QS-9000 is historical , superseded by ISO/TS 16949 and then IATF 16949.

PPAP defaults to Level 3 and has 18 elements summarized by the Part Submission Warrant.

Specification conflicts are escalated in writing , never resolved by the inspector.

N/A rather than blank. A blank field cannot be distinguished from an omission.