Study guide
3.3 Transfer Gages & Precision Accessories
ASQ Certified Quality Inspector CQI
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Shop Mathematics & Algebra
1.1 Basic Shop Math & Precision Measurement 1.2 Basic Algebra & Technical Formulas 1.3 Measurement Systems & Unit Conversions
2 Chapter 2: Geometry & Applied Shop Trigonometry
2.1 Applied Shop Geometry 2.2 Right-Triangle Trigonometry 2.3 Shop Trigonometry Applications & Sine Bars
3 Chapter 3: Handheld Variable & Attribute Gages
3.1 Variable Hand Measuring Instruments 3.2 Fixed Attribute & Limit Gages 3.3 Transfer Gages & Precision Accessories 3.4 Special Gages: Electronic, Pneumatic, Force & Environmental Instrumentation
4 Chapter 4: Surface Plate Inspection, Optical Systems & CMMs
4.1 Gage Selection, Care & Environmental Control 4.2 Surface Plate Tools & Layout Inspection 4.3 Optical Comparators & Vision Systems 4.4 Coordinate Measuring Machines (CMM) & 3-2-1 Alignment 4.5 Gage Correlation & Cross-Instrument Agreement
5 Chapter 5: Surface Metrology, Calibration Systems & MSA
5.1 Surface Texture & Finish Measurement 5.2 Calibration Systems & NIST Traceability 5.3 Measurement System Analysis (MSA) & Gage R&R 5.4 Measuring Mass, Form & Profile, and Inclination
6 Chapter 6: Technical Drawing & Blueprint Reading
6.1 Engineering Drawing Structure & Conventions 6.2 Views, Sectioning & Feature Representation 6.3 Dimensions, Tolerancing & Fit Classifications
7 Chapter 7: Geometric Dimensioning & Tolerancing (GD&T)
7.1 GD&T Fundamentals & Datum Reference Frames 7.2 Material Condition Modifiers & Bonus Tolerance 7.3 Form & Orientation Tolerances 7.4 Location, Profile & Runout Tolerances
8 Chapter 8: Sampling Inspection & Acceptance Sampling Plans
8.1 Sampling Fundamentals & Operating Characteristic (OC) Curves 8.2 Attribute Sampling with ANSI/ASQ Z1.4 8.3 Variables Sampling with ANSI/ASQ Z1.9
9 Chapter 9: Inspection Planning, Processes & Material Disposition
9.1 Inspection Planning, Receiving & In-Process Inspection 9.2 First Article Inspection (FAI) & Documentation 9.3 Nonconforming Material Control & MRB 9.4 Inspection Errors & Human Factors 9.5 Product Traceability, Age Control & Shelf Life
10 Chapter 10: Materials Testing & Nondestructive Examination
10.1 Mechanical & Destructive Testing 10.2 Surface & Subsurface NDE Methods 10.3 Volumetric & Electromagnetic NDE Methods 10.4 Functionality, Force & Elastomer Hardness Testing 10.5 Software for Test Equipment & Software Validation
11 Chapter 11: Statistical Process Control & Process Capability
11.1 Statistics Fundamentals & Normal Distribution 11.2 Control Charts for Variables 11.3 Control Charts for Attributes & Run Rules 11.4 Process Capability & Performance Analysis
12 Chapter 12: Quality Systems, Continuous Improvement & Safety
12.1 The 7 Classic Quality Control Tools 12.2 Continuous Improvement & Problem-Solving Methodologies 12.3 Quality Management Systems, Audits & CAPA 12.4 Workplace Safety, Environmental Controls & PPE 12.5 Failure Mode and Effects Analysis (FMEA) & Fault Tree Analysis (FTA)
13 Chapter 13: Quality Fundamentals, Teams & Documentation Systems
13.1 Quality Improvement Concepts, Products & Processes 13.2 Audit Tools, Tracing Techniques & Audit Communication 13.3 Employees as Resources: Empowerment, Team Roles & Team Development 13.4 Quality Documentation, Reference Standards & Document Control
3.3 Transfer Gages & Precision Accessories
Key Takeaways Explain This Topic AI
Transfer gages, including telescoping and small-hole gages, contain no graduated scales and require secondary measurement with an outside micrometer, making operator 'feel' the primary determinant of measurement repeatability.
Telescoping gages must be rocked gently past center inside a cylindrical bore to establish the true diameter across the spherical plunger heads prior to locking and micrometer transfer.
Precision gage blocks adhere to ASME B89.1.9 standards across grades 00 (reference masters), 0 (calibration), AS-1 (inspection), and AS-2 (shop floor working), requiring wringing through molecular adhesion.
An Arkansas stone (flat oilstone) is used to deburr nicked gage block mating faces without removing base metal, preserving planarity and wringing capability.
Cylindrical gage pins are manufactured with unilateral tolerances: Minus pins (nominal to -0.0002 in.) serve as Go gages for internal holes, while Plus pins (nominal to +0.0002 in.) serve as No-Go hole gages or Go slot gages.
Last updated: September 2026
3.3 Transfer Gages & Precision Accessories
In precision manufacturing, many internal cavities, recesses, fillet radii, and narrow clearances cannot accommodate direct-reading instruments like micrometers or calipers. In these applications, inspectors utilize transfer gages (indirect measuring tools) and precision reference accessories. Transfer tools capture a physical dimension through contact feel, lock it, and transfer it to a primary measuring instrument for quantitative readout.
Transfer Measurement Tools: Telescoping & Small-Hole Gages
Transfer gages have no built-in scales, dials, or digital electronics. Their accuracy depends entirely on the mechanical geometry of the tool and the tactile sensitivity ("feel") of the inspector.
Small-Hole Gages
Small-hole gages measure internal diameters, grooves, and slots from 0.125 in. to 0.500 in. (3.2 mm to 12.7 mm) , a range too small for standard telescoping gages or internal micrometer jaws.
Construction: A split spherical ball mounted at the end of a tubular stem. A knurled screw at the handle end drives a precision internal wedge between the split-ball halves, expanding them radially outward.
Styles:
Full-Ball Type: Spherical contact across the entire ball; used for open through-holes and deep internal diameters.
Half-Ball (Flat-Bottom) Type: The bottom pole of the ball is ground flat with the expanding split near the base. Essential for blind holes, shallow recesses, and measuring internal O-ring grooves right up to the bottom shoulder.
Measurement Procedure:
Collapse the split ball slightly smaller than the aperture.
Insert into the hole and expand the knurled wedge until a very light contact drag is felt.
Gently sweep the gage across the hole centerline to establish perpendicularity.
Carefully withdraw the gage and measure across the maximum spherical diameter using an outside micrometer. +-------------------------------------------------------------------------+
- | SMALL-HOLE GAGE (HALF-BALL TYPE) |
- | |
- | Flat bottom for blind holes: |
- | (\ /) <-- Split spherical ball halves |
- | | | (radially expanded by internal wedge) |
- | | | |
- | | | <-- Knurled handle sleeve |
- | | | |
- | [===] <-- Knurled expansion wedge adjusting knob |
- +-------------------------------------------------------------------------+
- Telescoping Gages (Snap Gages)
Telescoping gages measure internal diameters from 0.500 in. to 6.000 in. (12.7 mm to 152.4 mm) , typically supplied in sets of five or six tools covering overlapping ranges.
Construction: A T-shaped tool consisting of a tubular handle and a crosshead holding one or two spring-loaded telescoping plungers with precision radiused spherical ends. An internal rod connects a knurled lock knob at the tail of the handle to an internal chuck that clamps the plungers.
The Rocking Procedure (Crucial for CQI Exam):
Compress the plungers, lock the knurled nut, and insert the head into the bore at a slight angle past center.
Release the lock nut, allowing the spring-loaded plungers to expand firmly against the bore walls.
Tighten the knurled lock nut just enough to create a firm friction grip on the plungers (do not overtighten).
Keeping the handle aligned along the bore's axial plane, gently rock the handle through the centerline of the bore across the diameter. As the tool sweeps through center, the bore walls compress the spherical plungers to the exact true diameter.
Lock the knurled nut fully, carefully roll one tip out of the bore, and measure the tip-to-tip distance using a calibrated outside micrometer. TELESCOPING GAGE ROCKING TECHNIQUE:
- +---------------- Bore Wall ----------------+
- / \
- | / Plunger Tip (Expanded) |
- | O=================O |
- | / Crosshead \ |
- | / \ |
- | / Rocking Arc \ |
- | v v |
- | [===== Handle passes through Center =====] |
- \ /
- +-------------------------------------------+
* Plungers align to true diameter at the center point of the rocking arc.
Caution
Common Inspector Error: If an inspector locks the plungers while tilted and forces the gage straight out of the hole without rocking through center, the plungers will be mechanically crushed or cocked, creating an oversized, erroneous measurement.
Spring Calipers
Spring calipers (outside, inside, and hermaphrodite calipers) feature curved forged steel legs pivoted on a roller bearing and tensioned by a C-shaped spring. An adjusting screw and knurled thumbnut set the leg distance. Spring calipers provide a sensitive tactile comparator for transferring rough casting dimensions, wall thicknesses, and hole locations to a steel rule or micrometer.
- Special Inspection Gages: Feeler, Radius & Pitch
- Thickness (Feeler) Gages
Thickness gages consist of a folding fan-shaped case containing leaves of precision-rolled, tempered high-carbon spring steel (or non-magnetic brass for explosive/electronic setups) with nominal thicknesses from 0.0015 in. to 0.035 in. (0.04 mm to 1.0 mm) .
Applications: Measuring narrow mechanical clearances, piston ring end gaps, valve tappet clearances, mating flange gaps, and checking flatness beneath a precision straightedge.
Stacking Rules: Always select a single leaf whenever possible. If stacking is necessary to achieve a target thickness, combine the minimum number of leaves (never more than two or three). Clean each leaf thoroughly before stacking; microscopic oil films and trapped dust particles between multiple stacked leaves create significant cumulative positive errors.
Stepped ("Go/No-Go") Feeler Gages: Leaves where the forward 0.5 in. 0.5\text{ in.} 0.5 in. tip is 0.002 in. 0.002\text{ in.} 0.002 in. thinner than the rest of the blade (e.g., 0.008 in. 0.008\text{ in.} 0.008 in. tip with 0.010 in. 0.010\text{ in.} 0.010 in. body). Allows immediate go/no-go verification in production assembly: the tip must enter the gap, but the thicker body must be stopped.
Radius (Fillet) Gages
Radius gages verify concave internal fillets and convex external corner blend radii. Manufactured in sets from 1 / 64 in. 1/64\text{ in.} 1/64 in. to 1 / 2 in. 1/2\text{ in.} 1/2 in. (or 0.5 mm 0.5\text{ mm} 0.5 mm to 13 mm 13\text{ mm} 13 mm ):
Light Gap Inspection: The gage leaf is held firmly perpendicular against the curved feature and viewed against a backlight or bright white surface.
Interpreting Light Gaps:
Light at Center: If light escapes under the center of a concave radius gage, the part's fillet radius is too large (or improperly blended).
Light at Edges: If light shines at the outer edges of the gage leaf while the center touches, the workpiece radius is too small .
Screw Pitch Gages
Screw pitch gages contain leaves with precision stamped serrations matching standard thread forms ( 60 ∘ 60^\circ 6 0 ∘ Unified National, 60 ∘ 60^\circ 6 0 ∘ Metric, 55 ∘ 55^\circ 5 5 ∘ Whitworth, or 29 ∘ 29^\circ 2 9 ∘ Acme). By placing successive leaves against a threaded fastener until the teeth mesh without light gaps, the inspector identifies the threads per inch (TPI) or metric pitch in millimeters .
Warning
CQI Exam Trap — Scope of Pitch Gages: A screw pitch gage identifies thread pitch only . It cannot determine pitch diameter, lead error, flank angle correctness, or thread drunkenness. Never cite a screw pitch gage as a tool for verifying thread tolerance class or pitch diameter compliance!
Precision Gage Blocks (Jo Blocks)
Precision gage blocks (invented by Carl Edvard Johansson) are the fundamental physical standards of length used in industry to calibrate gages, set optical comparators, zero bore gages, and inspect precision setups. Standardized globally under ASME B89.1.9 (USA) and ISO 3650 .
Material Comparison
Gage Block Material Thermal Expansion Coeff. ( α \alpha α ) Hardness & Wear Resistance Corrosion Resistance Advantages & Disadvantages
High-Carbon Chrome Steel 11.5 × 10 − 6 / ∘ C 11.5 \times 10^{-6} / ^\circ\text{C} 11.5 × 1 0 − 6 / ∘ C
( 6.4 × 10 − 6 / ∘ F 6.4 \times 10^{-6} / ^\circ\text{F} 6.4 × 1 0 − 6 / ∘ F ) Standard ( 64 HRC 64\text{ HRC} 64 HRC );
Moderate wear Poor (vulnerable to rust and fingerprint etching) Economical; identical thermal expansion to common steels; easily scratched
Tungsten Carbide 4.5 × 10 − 6 / ∘ C 4.5 \times 10^{-6} / ^\circ\text{C} 4.5 × 1 0 − 6 / ∘ C
( 2.5 × 10 − 6 / ∘ F 2.5 \times 10^{-6} / ^\circ\text{F} 2.5 × 1 0 − 6 / ∘ F ) Extremely High ( 1500 HV 1500\text{ HV} 1500 HV );
- 10× steel wear Excellent Exceptionally durable; heavy; high thermal expansion mismatch with steel workpieces
- Chromium Carbide 8.4 × 10 − 6 / ∘ C 8.4 \times 10^{-6} / ^\circ\text{C} 8.4 × 1 0 − 6 / ∘ C
- ( 4.7 × 10 − 6 / ∘ F 4.7 \times 10^{-6} / ^\circ\text{F} 4.7 × 1 0 − 6 / ∘ F ) Very High;
5× steel wear Superior (will not rust) Excellent compromise of wear resistance and thermal expansion closer to steel
Zirconia Ceramic 9.5 × 10 − 6 / ∘ C 9.5 \times 10^{-6} / ^\circ\text{C} 9.5 × 1 0 − 6 / ∘ C
( 5.3 × 10 − 6 / ∘ F 5.3 \times 10^{-6} / ^\circ\text{F} 5.3 × 1 0 − 6 / ∘ F ) Ultra-High ( 1400 HV 1400\text{ HV} 1400 HV );
10× steel wear Complete immunity to corrosion and acids Non-magnetic; burr-free (impacts chip rather than forming raised burrs); thermal match to steel
ASME B89.1.9 Accuracy Grades
Grade 00 (Reference / Master): Tightest tolerance ( ± 0.000002 in. \pm 0.000002\text{ in.} ± 0.000002 in. or 0.05 μ m 0.05\;\mu\text{m} 0.05 μ m ). Restricted to temperature-controlled standards laboratories ( 68 ∘ F / 20 ∘ C 68^\circ\text{F} / 20^\circ\text{C} 6 8 ∘ F /2 0 ∘ C ) to calibrate working gage blocks.
Grade 0 (Calibration Standard): High precision ( ± 0.000004 in. \pm 0.000004\text{ in.} ± 0.000004 in. or 0.10 μ m 0.10\;\mu\text{m} 0.10 μ m ). Used to calibrate high-precision electronic height gages, setting masters, bore gages, and CMM touch probes.
Grade AS-1 (formerly Grades 1 & 2 - Inspection): Standard quality control grade ( ± 0.000008 in. \pm 0.000008\text{ in.} ± 0.000008 in. or 0.20 μ m 0.20\;\mu\text{m} 0.20 μ m ). Used in toolrooms and QC labs for setting sine bars, calibrating micrometers, and surface plate layout.
Grade AS-2 (formerly Grade 3 - Working): Shop floor working grade ( ± 0.000016 in. \pm 0.000016\text{ in.} ± 0.000016 in. or 0.40 μ m 0.40\;\mu\text{m} 0.40 μ m ). Used at machine stations for setting fixtures, stops, and visual comparisons.
The Wringing Phenomenon
Wringing is the process of joining the ultra-flat, mirror-lapped measuring surfaces of two gage blocks so that they adhere strongly without external clamping.
Physics of Wringing: Achieved through three combined mechanisms:
Van der Waals Forces: Intermolecular surface attraction occurring across intimate atomic contact.
Capillary Adhesion: An ultra-thin molecular liquid film (oil/moisture, approx. 6 nanometers thick) acting in tension.
Atmospheric Pressure: Air is excluded from between the mating surfaces.
Correct Wringing Procedure:
Thoroughly clean the blocks using filtered mineral spirits or denatured alcohol and dry with a lint-free optical wipe.
Apply a microscopic trace of gage block oil and wipe it virtually clean with an optical pad.
Overlap the blocks at a 90 ∘ 90^\circ 9 0 ∘ cross orientation under light contact pressure.
Slide and rotate the blocks into parallel alignment. A smooth, distinct suction drag will be felt as the blocks lock.
Stacking Selection Rule: Build target dimensions using the minimum number of blocks (target ≤ 4 \le 4 ≤ 4 blocks) to minimize cumulative error and film thickness. Always eliminate decimal places from right to left (smallest decimal place first). Example: To build 1.4378 in. 1.4378\text{ in.} 1.4378 in. from an 81-piece set:
- Target: 1.4378 1.4378 1.4378
- 1st block (eliminate 0.0008): − 0.1008 = 1.3370 -0.1008 = 1.3370 − 0.1008 = 1.3370
- 2nd block (eliminate 0.007): − 0.1370 = 1.2000 -0.1370 = 1.2000 − 0.1370 = 1.2000
- 3rd block (eliminate 0.200): − 0.2000 = 1.0000 -0.2000 = 1.0000 − 0.2000 = 1.0000
- 4th block (eliminate 1.000): − 1.0000 = 0.0000 -1.0000 = 0.0000 − 1.0000 = 0.0000
Combination: 0.1008 + 0.1370 + 0.2000 + 1.0000 = 1.4378 in. 0.1008 + 0.1370 + 0.2000 + 1.0000 = 1.4378\text{ in.} 0.1008 + 0.1370 + 0.2000 + 1.0000 = 1.4378 in. (Exactly 4 blocks). +-------------------------------------------------------------------------+
- | GAGE BLOCK WRINGING PROCESS |
- | |
- | 1. Cross Alignment (90 deg) 2. Slide & Rotate into Parallel |
- | [Block A] [Block A] |
- | | | |
- | [===== Block B =====] [===== Block B =====] |
- | |
- | Molecular van der Waals forces + capillary oil film create bond. |
- +-------------------------------------------------------------------------+
- Deburring & Maintenance with the Arkansas Stone
When a steel gage block is accidentally dropped or knocked, the impact crater does not just depress metal; ductile displacement forces metal upward, creating a microscopic raised burr around the crater rim. This raised burr will scratch mating blocks and destroy wringing adhesion.
Reconditioning Technique: Metrologists use an Arkansas oilstone (ultra-fine natural novaculite stone) or sintered ceramic conditioning stone.
Lightly lubricate the stone with clean mineral oil.
Place the gage block face completely flat against the stone.
Move the block in gentle circular strokes with light, uniform pressure without rocking.
Action: Because the stone is harder than the steel and perfectly flat, it shears away the raised burr protruding above the plane without removing un-nicked base metal .
Caution
Never Store Wrung Blocks Assembled: Blocks left wrung together for extended periods (days or weeks) will undergo galvanic corrosion, cold welding, and surface bonding, permanently ruining the reference faces. Always disassemble, clean, oil, and return blocks to their wooden case immediately after inspection.
Precision Gage Pins (Pin Gages)
Precision cylindrical gage pins (pin gages) are ground cylindrical steel pins supplied in sets covering diameters from 0.011 in. to 1.000 in. in standard steps of 0.001 in. 0.001\text{ in.} 0.001 in. or 0.0005 in. 0.0005\text{ in.} 0.0005 in.
Minus Pins vs. Plus Pins (Standard Class ZZ)
Cylindrical pins are manufactured with unilateral tolerances of 0.0002 in. 0.0002\text{ in.} 0.0002 in. ( 0.005 mm 0.005\text{ mm} 0.005 mm ):
Minus Pins (Class ZZ Minus):
Tolerance: + 0.0000 in. / − 0.0002 in. +0.0000\text{ in.} / -0.0002\text{ in.} + 0.0000 in. / − 0.0002 in.
A 0.250 in. 0.250\text{ in.} 0.250 in. Minus pin is ground between 0.2498 in. 0.2498\text{ in.} 0.2498 in. and 0.2500 in. 0.2500\text{ in.} 0.2500 in.
Primary Application: Used as Go gages for internal holes . Because the pin is never larger than nominal ( 0.2500 in. 0.2500\text{ in.} 0.2500 in. ), if it enters a hole specified with a lower limit of 0.2500 in. 0.2500\text{ in.} 0.2500 in. , the hole is guaranteed to meet or exceed the minimum size limit.
Plus Pins (Class ZZ Plus):
Tolerance: + 0.0002 in. / − 0.0000 in. +0.0002\text{ in.} / -0.0000\text{ in.} + 0.0002 in. / − 0.0000 in.
A 0.250 in. 0.250\text{ in.} 0.250 in. Plus pin is ground between 0.2500 in. 0.2500\text{ in.} 0.2500 in. and 0.2502 in. 0.2502\text{ in.} 0.2502 in.
Primary Application: Used as No-Go gages for internal holes (if it enters, the hole is oversized) or as Go gages for external slots and keyways .
Gage Pin Type Unilateral Tolerance Range Standard Gaging Role Why This Role?
Minus Pin + 0.0000 in. / − 0.0002 in. +0.0000\text{ in.} / -0.0002\text{ in.} + 0.0000 in. / − 0.0002 in. Go Gage for Holes Guaranteed not to exceed nominal; will not falsely reject good holes
Plus Pin + 0.0002 in. / − 0.0000 in. +0.0002\text{ in.} / -0.0000\text{ in.} + 0.0002 in. / − 0.0000 in. No-Go Gage for Holes Guaranteed not to fall below nominal; will not falsely accept oversize holes
Plus Pin + 0.0002 in. / − 0.0000 in. +0.0002\text{ in.} / -0.0000\text{ in.} + 0.0002 in. / − 0.0000 in. Go Gage for Slots Verifies slot width at minimum metal boundary
Advanced Applications of Gage Pins
Measuring Hole Center-to-Center Distance: Measuring center distances between small holes with calipers is inaccurate due to knife-edge jaw positioning. By inserting tight-fitting gage pins into both holes and measuring across the pins' outer span ( L outer L_{\text{outer}} L outer ) and inner span ( L inner L_{\text{inner}} L inner ) with an outside micrometer, the true center distance is calculated: Center-to-Center Distance ( C ) = L outer + L inner 2 \text{Center-to-Center Distance } (C) = \frac{L_{\text{outer}} + L_{\text{inner}}}{2} Center-to-Center Distance ( C ) = 2 L outer + L inner
Three-Wire Thread Measurement: Calibrated precision thread measuring wires (essentially miniature gage pins) measure pitch diameter on outside micrometers.
Real Shop Inspection Scenario
Scenario: A setup inspector is qualifying a machining fixture holding an aerospace pump housing. Two dowel locating holes are called out on the drawing as ∅ 0.3750 in. + 0.0008 / − 0.0000 in. \varnothing 0.3750\text{ in.} +0.0008 / -0.0000\text{ in.} ∅ 0.3750 in. + 0.0008/ − 0.0000 in. , with a center-to-center distance of 2.5000 in. ± 0.0005 in. 2.5000\text{ in.} \pm 0.0005\text{ in.} 2.5000 in. ± 0.0005 in.
Bore Verification:
Lower specification limit (MMC) is 0.3750 in. 0.3750\text{ in.} 0.3750 in. The inspector selects a 0.3750 in. 0.3750\text{ in.} 0.3750 in. Minus pin ( + 0.0000 / − 0.0002 in. +0.0000 / -0.0002\text{ in.} + 0.0000/ − 0.0002 in. ) as the Go gage. The pin enters both holes smoothly with light finger pressure.
Upper specification limit (LMC) is 0.3758 in. 0.3758\text{ in.} 0.3758 in. The inspector selects a 0.3758 in. 0.3758\text{ in.} 0.3758 in. Plus pin ( + 0.0002 / − 0.0000 in. +0.0002 / -0.0000\text{ in.} + 0.0002/ − 0.0000 in. ) as the No-Go gage. The pin refuses to enter both holes. Both holes conform to diameter.
Center-to-Center Distance Verification:
With the two 0.3750 in. 0.3750\text{ in.} 0.3750 in. pins inserted into the holes, the inspector uses a 2 − 3 in. 2-3\text{ in.} 2 − 3 in. outside micrometer zeroed against a Grade AS-1 gage block stack to measure across the outer cylinder boundaries ( L outer = 2.8751 in. L_{\text{outer}} = 2.8751\text{ in.} L outer = 2.8751 in. ) and inside boundaries ( L inner = 2.1249 in. L_{\text{inner}} = 2.1249\text{ in.} L inner = 2.1249 in. ).
Center distance calculation: C = 2.8751 + 2.1249 2 = 5.0000 2 = 2.5000 in. C = \frac{2.8751 + 2.1249}{2} = \frac{5.0000}{2} = 2.5000\text{ in.} C = 2 2.8751 + 2.1249 = 2 5.0000 = 2.5000 in.
The center distance matches nominal perfectly, qualifying the machining fixture for production.