Study guide

4.4 Coordinate Measuring Machines (CMM) & 3-2-1 Alignment

ASQ Certified Quality Inspector CQI

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Shop Mathematics & Algebra

1.1 Basic Shop Math & Precision Measurement 1.2 Basic Algebra & Technical Formulas 1.3 Measurement Systems & Unit Conversions

2 Chapter 2: Geometry & Applied Shop Trigonometry

2.1 Applied Shop Geometry 2.2 Right-Triangle Trigonometry 2.3 Shop Trigonometry Applications & Sine Bars

3 Chapter 3: Handheld Variable & Attribute Gages

3.1 Variable Hand Measuring Instruments 3.2 Fixed Attribute & Limit Gages 3.3 Transfer Gages & Precision Accessories 3.4 Special Gages: Electronic, Pneumatic, Force & Environmental Instrumentation

4 Chapter 4: Surface Plate Inspection, Optical Systems & CMMs

4.1 Gage Selection, Care & Environmental Control 4.2 Surface Plate Tools & Layout Inspection 4.3 Optical Comparators & Vision Systems 4.4 Coordinate Measuring Machines (CMM) & 3-2-1 Alignment 4.5 Gage Correlation & Cross-Instrument Agreement

5 Chapter 5: Surface Metrology, Calibration Systems & MSA

5.1 Surface Texture & Finish Measurement 5.2 Calibration Systems & NIST Traceability 5.3 Measurement System Analysis (MSA) & Gage R&R 5.4 Measuring Mass, Form & Profile, and Inclination

6 Chapter 6: Technical Drawing & Blueprint Reading

6.1 Engineering Drawing Structure & Conventions 6.2 Views, Sectioning & Feature Representation 6.3 Dimensions, Tolerancing & Fit Classifications

7 Chapter 7: Geometric Dimensioning & Tolerancing (GD&T)

7.1 GD&T Fundamentals & Datum Reference Frames 7.2 Material Condition Modifiers & Bonus Tolerance 7.3 Form & Orientation Tolerances 7.4 Location, Profile & Runout Tolerances

8 Chapter 8: Sampling Inspection & Acceptance Sampling Plans

8.1 Sampling Fundamentals & Operating Characteristic (OC) Curves 8.2 Attribute Sampling with ANSI/ASQ Z1.4 8.3 Variables Sampling with ANSI/ASQ Z1.9

9 Chapter 9: Inspection Planning, Processes & Material Disposition

9.1 Inspection Planning, Receiving & In-Process Inspection 9.2 First Article Inspection (FAI) & Documentation 9.3 Nonconforming Material Control & MRB 9.4 Inspection Errors & Human Factors 9.5 Product Traceability, Age Control & Shelf Life

10 Chapter 10: Materials Testing & Nondestructive Examination

10.1 Mechanical & Destructive Testing 10.2 Surface & Subsurface NDE Methods 10.3 Volumetric & Electromagnetic NDE Methods 10.4 Functionality, Force & Elastomer Hardness Testing 10.5 Software for Test Equipment & Software Validation

11 Chapter 11: Statistical Process Control & Process Capability

11.1 Statistics Fundamentals & Normal Distribution 11.2 Control Charts for Variables 11.3 Control Charts for Attributes & Run Rules 11.4 Process Capability & Performance Analysis

12 Chapter 12: Quality Systems, Continuous Improvement & Safety

12.1 The 7 Classic Quality Control Tools 12.2 Continuous Improvement & Problem-Solving Methodologies 12.3 Quality Management Systems, Audits & CAPA 12.4 Workplace Safety, Environmental Controls & PPE 12.5 Failure Mode and Effects Analysis (FMEA) & Fault Tree Analysis (FTA)

13 Chapter 13: Quality Fundamentals, Teams & Documentation Systems

13.1 Quality Improvement Concepts, Products & Processes 13.2 Audit Tools, Tracing Techniques & Audit Communication 13.3 Employees as Resources: Empowerment, Team Roles & Team Development 13.4 Quality Documentation, Reference Standards & Document Control

4.4 Coordinate Measuring Machines (CMM) & 3-2-1 Alignment

Key Takeaways Explain This Topic AI

Coordinate Measuring Machines (CMMs) capture 3D point coordinates (X, Y, Z) to mathematically verify geometric features, size, and GD&T callouts across moving bridge, fixed bridge, gantry, and portable arm architectures.

Touch-trigger probes exhibit kinematic seat lobing error that requires qualification against a certified reference sphere to determine effective electrical tip radius and angular probe offsets.

The 3-2-1 alignment principle constrains all six degrees of freedom: primary datum (3 points) constrains pitch, roll, and translation; secondary datum (2 points) constrains yaw and translation; tertiary datum (1 point) constrains the final translation.

A Part Coordinate System (PCS) mathematically maps blueprint datums into an unambiguous alignment frame, allowing CMM software to evaluate features independently of part clamping in the Machine Coordinate System (MCS).

CMM measurement error sources include thermal gradients, dynamic acceleration forces, improper stylus selection (aspect ratio and stem bending), and insufficient point-density sampling on form features.

Last updated: September 2026

4.4 Coordinate Measuring Machines (CMM) & 3-2-1 Alignment

The Coordinate Measuring Machine (CMM) is the cornerstone of automated 3D dimensional metrology in modern manufacturing. By moving a specialized sensor—such as a touch-trigger probe, continuous analog scanning probe, or non-contact laser scanner—along three mutually orthogonal axes ( X , Y , Z X, Y, Z X , Y , Z ), a CMM captures discrete spatial coordinates on a physical workpiece. Powerful metrology software transforms these raw Cartesian data points into geometric entities (planes, cylinders, spheres, cones, lines) and mathematically evaluates complex dimensional specifications, feature locations, and ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T) callouts.

CMM Physical Architectures & Kinematics

The mechanical structure of a CMM dictates its volumetric measuring capacity, rigidity, natural frequency, accessibility, and measurement uncertainty: +-------------------------------------------------------------------------+

  • | CMM PHYSICAL ARCHITECTURES |
  • | |
  • | 1. MOVING BRIDGE (Most Common): 2. CANTILEVER: |
  • | +-----------------+ +--------+ |
  • | | Carriage (X) | | Quill | |
  • | +--------+--------+ +---+----+ |
  • | | Quill (Z) | (Z) |
  • | [Bridge] v [Column] v |
  • | || [Probe] || [Probe] |
  • | || | || | |
  • | ===++========++==== (Y Axis) ===++======++==== (Y Axis) |
  • | [ Granite Table ] [ Granite Table ] |
  • | |
  • | 3. GANTRY (Massive Parts): 4. HORIZONTAL ARM: |
  • | ========================= || |
  • | || Overhead Rail || || Column |
  • | || +---+ || || |
  • | || | Z | || <====++====> Horizontal |
  • | || +-+-+ || || Arm (X) |
  • | || v [Probe] || || |
  • | Floor Level Plate [ Vertical Staging Bed ] |
  • +-------------------------------------------------------------------------+
  • Primary CMM Structural Types

Moving Bridge:

The most widely used architecture in manufacturing facilities and quality control labs.

A rigid bridge structure traverses the Y-axis along guide rails mounted to or beside a granite table. The probe carriage travels across the horizontal bridge beam (X-axis), and the vertical quill houses the probe (Z-axis).

Strengths: Excellent balance of high structural rigidity, small footprint, accessible loading, and high volumetric accuracy ( 1 1 1 to 3 μ m 3\ \mu\text{m} 3 μ m ).

Limitation: Bridge acceleration can induce yaw and pitch (dynamic pitching error) on very long Y-axis travels.

Fixed Bridge:

The bridge structure is bolted rigidly and permanently to the granite base, while the worktable itself moves along the Y-axis.

Strengths: Eliminates bridge yaw and structural acceleration deflection; achieves the highest mechanical accuracy of all stationary CMMs (sub-micron precision for calibration masters).

Limitation: Part weight is strictly limited because heavy workpieces deflect the moving table, and cycle speeds are slower.

Cantilever:

The measuring quill is supported from a single vertical column extending from one side of the machine base.

Strengths: Completely open and unobstructed on three sides, allowing rapid manual loading and unloading of small parts.

Limitation: The cantilever arm acts as a structural lever beam; when extended to its maximum reach, gravitational bending and dynamic vibration increase measurement uncertainty.

Gantry:

An overhead structural frame mounted on massive raised columns anchored directly into isolated concrete floor foundations.

Strengths: Enormous volumetric measuring capacity ( 10 10 10 to > 100 cubic meters >100\text{ cubic meters} > 100 cubic meters ). Used for inspecting automotive body-in-white frames, aerospace fuselages, turbine housings, and heavy earthmoving structures.

Limitation: High facility installation cost, requires dedicated foundation isolation pits to decouple environmental building vibrations.

Horizontal Arm:

A horizontal probe ram extends laterally from a vertical column that moves along a side guideway.

Strengths: Unmatched side access for measuring deep automotive passenger compartments, instrument panels, and side panels.

Limitation: Cantilever droop on the horizontal arm limits absolute accuracy compared to bridge machines.

Portable Articulated Arms:

Multi-jointed mechanical arms (6 or 7 degrees of freedom) equipped with precision high-resolution rotary optical encoders at each joint.

Strengths: Highly portable; can be taken directly onto the production floor, inside an aircraft fuselage, or mounted onto a CNC mill.

Limitation: Higher volumetric uncertainty ( 0.001 in. / 25 μ m 0.001\text{ in.} / 25\ \mu\text{m} 0.001 in. /25 μ m ) compared to stationary granite CMMs due to operator handling forces and joint clearances.

Probe Systems: Contact & Non-Contact

The probe is the sensing element that detects physical contact or surface proximity with the part feature:

Touch-Trigger Probes (Kinematic Mechanism)

The standard touch-trigger probe (e.g., Renishaw TP20, TP200) is a discrete point collection sensor based on an ingenious mechanical kinematic seat mechanism : +-------------------------------------------------------------------------+

  • | TOUCH-TRIGGER KINEMATIC MECHANISM |
  • | |
  • | [ Central Helical Spring ] |
  • | | |
  • | v |
  • | +-------------------+ |
  • | | Triangular Spider | |
  • | +---------+---------+ |
  • | | |
  • | Radial Rod 1 Radial Rod 2 Radial Rod 3 |
  • | o---o o---o o---o |
  • | (Ball 1&2) (Ball 3&4) (Ball 5&6) |
  • | Carbide Pairs Carbide Pairs Carbide Pairs |
  • | \ | / |
  • | +-------------------+-------------------+ |
  • | | |
  • | Stylus Stem |
  • | | |
  • | ( Ruby Ball Tip ) |
  • +-------------------------------------------------------------------------+

Kinematic Operation: Three cylindrical carbide rods extend radially at 120 ∘ 120^\circ 12 0 ∘ from a central triangular spider. Each rod rests across a pair of precision carbide balls embedded in the probe housing, forming six points of electrical contact wired in a continuous series circuit.

Trigger Event: When the stylus tip touches the workpiece from any direction, the contact force pivots or lifts the triangular spider against an internal spring. This tiny mechanical movement breaks electrical continuity across one of the three ball-seat pairs, instantly generating a step-voltage trigger signal.

Coordinate Latch: The trigger signal immediately latches the instantaneous digital scale positions ( X , Y , Z ) (X, Y, Z) ( X , Y , Z ) on the machine's counter cards with sub-microsecond latency.

Pre-Travel Variation (Lobing Error):

Because the mechanical leverage of the triangular seat varies depending on the contact direction relative to the three radial rods, the stylus must deflect slightly more before triggering in some directions than others.

This directional variation in trigger displacement is called pre-travel variation or lobing (generating a triangular, three-lobed error pattern of 0.00004 in. 0.00004\text{ in.} 0.00004 in. to 0.00015 in. 0.00015\text{ in.} 0.00015 in. ). Calibration against a reference sphere mathematically maps and compensates for this lobing error.

Analog Scanning Probes vs. Non-Contact Probes

Analog Continuous Scanning Probes (e.g., Renishaw SP25M): Rather than capturing individual points, the probe stays in continuous sliding contact with the workpiece, acquiring thousands of data points per second. Internal high-resolution LVDTs (Linear Variable Differential Transformers) or optical sensors continuously measure probe tip deflection. Essential for verifying high-density form errors: roundness, straightness, cylindricity, and complex 3D airfoil contours.

Optical / Laser Triangulation Probes: Non-contact sensors projecting a high-frequency laser stripe or chromatic white light spot onto the part. Collects millions of cloud points for reverse engineering, sheet metal feature finding, and inspecting soft, easily deformed elastomeric parts (silicone, rubber, foam).

Stylus Qualification & Reference Sphere Calibration

A CMM cannot report accurate dimensional data until its probe stylus configuration is mathematically qualified (calibrated): +-------------------------------------------------------------------------+

  • | STYLUS QUALIFICATION ON REFERENCE SPHERE |
  • | |
  • | Stylus Shaft |
  • | || |
  • | ( Ruby Ball ) |
  • | * * * <--- Probing multiple points |
  • | .-' '-. |
  • | .' '. |
  • | / CERAMIC MASTER \ |
  • | ; CALIBRATION ; Known Calibrated Diameter |
  • | | SPHERE | (e.g., 0.75000 in.) |
  • | \ / |
  • | '. .' |
  • | '-. .-' |
  • | '-------' |
  • | || Rigid Mounting Stem |
  • | =================== Granite Plate |
  • +-------------------------------------------------------------------------+
  • Objectives of Stylus Qualification

Determine the Effective Electrical Tip Radius ( r eff r_{\text{eff}} r eff ​ ):

A physical ruby ball has a known manufacturing radius (e.g., nominal 2.000 mm 2.000\text{ mm} 2.000 mm ). However, because the stylus stem bends slightly and the kinematic mechanism requires a finite pre-travel force before triggering, the effective electrical radius is always slightly smaller than the physical radius.

During qualification, the CMM software fits a least-squares sphere to points probed on the reference sphere. By subtracting the known master sphere diameter, the software calculates the exact effective radius ( r eff r_{\text{eff}} r eff ​ ) to apply for offset compensation during part measurement.

Determine Spatial Offset Vectors for Multiple Styli:

When using star styli (multiple tips pointing in different directions) or articulating motorized probe heads (e.g., Renishaw PH10 rotating to various A and B angular positions), each probe tip position possesses a unique spatial offset relative to the quill.

Qualifying all tip positions against the same reference sphere establishes their exact ( X , Y , Z ) (X, Y, Z) ( X , Y , Z ) spatial offset relationships, allowing seamless switching between probe angles within a single inspection program without losing coordinate alignment.

Part Coordinate System (PCS) vs. Machine Coordinate System (MCS)

A fundamental concept in CMM metrology is the mathematical decoupling of the part orientation from the machine frame:

Machine Coordinate System (MCS): The fixed, physical Cartesian coordinate system ( X , Y , Z ) (X, Y, Z) ( X , Y , Z ) defined by the mechanical guide rails, optical scales, and physical home switches of the CMM structure. The MCS origin ( 0 , 0 , 0 ) (0,0,0) ( 0 , 0 , 0 ) is permanently locked to the machine.

Part Coordinate System (PCS): A virtual, mathematical Cartesian coordinate system established relative to the datum features specified on the engineering drawing of the workpiece.

Note

The Power of PCS Transformation: A workpiece placed on a CMM table is almost never physically aligned with the machine guide rails. It is typically resting at an arbitrary skew angle. Metrology software uses a 3D coordinate transformation matrix consisting of rotational matrices [ R ] [R] [ R ] and translation vectors [ D ] [D] [ D ] : [ P PCS ] = [ R ] ⋅ ( [ P MCS ] − [ D ] ) [P_{\text{PCS}}] = [R] \cdot ([P_{\text{MCS}}] - [D]) [ P PCS ​ ] = [ R ] ⋅ ([ P MCS ​ ] − [ D ]) This mathematical alignment rotates and translates every raw data point gathered in the MCS into the drawing's PCS. Clamping fixtures do not need to be aligned with the machine axes.

The 3-2-1 Alignment Principle & Degrees of Freedom (DOF)

The 3-2-1 Alignment Principle is the universal mathematical protocol used to constrain all spatial movement of a rigid body, locking the Part Coordinate System to the physical datum features.

Rigid Body Kinematics & The 6 Degrees of Freedom

A free, unconstrained rigid object in three-dimensional space possesses exactly six degrees of freedom (6 DOF) :

3 Translational Degrees of Freedom: Linear movement along the X, Y, and Z axes ( T x , T y , T z T_x, T_y, T_z T x ​ , T y ​ , T z ​ ).

3 Rotational Degrees of Freedom: Angular rotation around the X, Y, and Z axes ( R x , R y , R z R_x, R_y, R_z R x ​ , R y ​ , R z ​ ). +-------------------------------------------------------------------------+

  • | THE 3-2-1 ALIGNMENT CONSTRAINT MECHANISM |
  • | |
  • | PRIMARY DATUM (Datum A - Plane): 3 Points |
  • | - Constrains 3 DOF: Pitch (Rx), Roll (Ry), Translation (Tz) |
  • | - Levels the spatial coordinate orientation vector normal to plane. |
  • | - Sets the Z origin (Z = 0). |
  • | |
  • | SECONDARY DATUM (Datum B - Line/Edge): 2 Points |
  • | - Constrains 2 DOF: Yaw (Rz), Translation (Ty) |
  • | - Rotates (clocks) the coordinate axis parallel to the line. |
  • | - Sets the Y origin (Y = 0). |
  • | |
  • | TERTIARY DATUM (Datum C - Point/Stop): 1 Point |
  • | - Constrains 1 DOF: Translation (Tx) |
  • | - Sets the final X origin (X = 0). |
  • | |
  • | TOTAL CONSTRAINED: 3 + 2 + 1 = 6 DEGREES OF FREEDOM (Zero Remaining) |
  • +-------------------------------------------------------------------------+
  • Step-by-Step 3-2-1 Alignment Workflow

Step 1: Primary Datum — Plane (Level / Spatial Orientation):

Probe a minimum of three non-collinear points on the primary datum feature (Datum A, typically the largest flat planar face).

Mathematical Action: Software constructs a best-fit 3D plane. The normal vector of this plane defines the primary coordinate axis (e.g., Z-axis vector). This constrains 3 degrees of freedom : two rotations ( R x R_x R x ​ pitch, R y R_y R y ​ roll) and one translation ( T z T_z T z ​ ). It establishes the orientation of the Z-axis and sets the Z = 0 Z = 0 Z = 0 origin.

Step 2: Secondary Datum — Line (Clocking / Planar Rotation):

Probe a minimum of two separated points along a perpendicular edge or feature (Datum B).

Mathematical Action: Software constructs a 2D line projected onto the primary plane. The coordinate system is rotated around the Z-axis until the X-axis is parallel to this line. This constrains 2 degrees of freedom : one rotation ( R z R_z R z ​ yaw/clocking) and one translation ( T y T_y T y ​ ). It sets the Y = 0 Y = 0 Y = 0 origin.

Step 3: Tertiary Datum — Point (Origin Translation):

Probe a minimum of one point on a perpendicular end face (Datum C).

Mathematical Action: Software constrains the final 1 translational degree of freedom ( T x T_x T x ​ ). It sets the final linear origin position at X = 0 X = 0 X = 0 .

Result: All 6 6 6 degrees of freedom are fully locked ( 3 + 2 + 1 = 6 3 + 2 + 1 = 6 3 + 2 + 1 = 6 ), establishing an unambiguous, repeatable ( 0 , 0 , 0 ) (0,0,0) ( 0 , 0 , 0 ) origin for all subsequent geometric measurements.

Cylindrical & Radial Alignments (Axis-Plane-Point)

For turned or cylindrical parts, a planar 3-2-1 alignment is replaced by a cylindrical alignment:

Primary Cylinder (Axis): Probing two levels of 4 points on a bore or shaft constructs a 3D centerline vector. This constrains 4 degrees of freedom : two rotational ( R x , R y R_x, R_y R x ​ , R y ​ ) and two translational ( T x , T y T_x, T_y T x ​ , T y ​ ), establishing the central ( X = 0 , Y = 0 ) (X=0, Y=0) ( X = 0 , Y = 0 ) origin.

Secondary Plane (Face): Probing a perpendicular shoulder face constrains 1 translational degree of freedom ( T z T_z T z ​ ), setting Z = 0 Z = 0 Z = 0 .

Tertiary Keyway / Cross-Hole: Probing a keyway slot or cross-hole constrains the final 1 rotational degree of freedom ( R z R_z R z ​ ), locking the rotational clocking orientation.

Common CMM Probing Errors & Prevention

Inspectors must recognize and mitigate critical operational error sources:

1. Cosine Probing Error & Vector Compensation

When a touch-trigger probe approaches a surface, the software must know the true surface normal vector ( i ^ , j ^ , k ^ ) (\hat{i}, \hat{j}, \hat{k}) ( i ^ , j ^ ​ , k ^ ) to apply the tip radius offset ( r eff r_{\text{eff}} r eff ​ ) strictly perpendicular to the surface. If a part has an angled face and the CMM takes a touch moving along a pure machine axis without vector compensation, cosine error occurs: Error = r eff ⋅ ( 1 − cos ⁡ θ ) \text{Error} = r_{\text{eff}} \cdot (1 - \cos\theta) Error = r eff ​ ⋅ ( 1 − cos θ )

Prevention: Always program probe touches with CAD-guided 3D vector normal approach vectors.

2. Probe Shanking

Shanking occurs when the cylindrical stem (shank) of the stylus makes accidental physical contact with a hole edge, counterbore lip, or step shoulder before the ruby ball tip touches.

Because the electrical kinematic seat triggers upon stem contact, the CMM registers a touch. However, the software calculates the coordinate assuming contact occurred at the center of the ruby ball. Because the stem has a smaller diameter than the ball and is located higher up the shaft, this produces massive coordinate errors (often 0.010 in. 0.010\text{ in.} 0.010 in. to > 0.050 in. >0.050\text{ in.} > 0.050 in. ).

Prevention: Select styli with larger ball diameters, use necked extension stems, or angle the probe head to ensure only the ruby sphere can touch the workpiece. +-------------------------------------------------------------------------+

  • | STYLUS SHANKING DEFECT |
  • | |
  • | Stylus Stem [ | ] |
  • | [ | ] <==== ACCIDENTAL SHANK CONTACT! |
  • | [ | ] (Triggers false coordinate latch) |
  • | (O) Ruby Ball (Never touches part!) |
  • | +------------+ |
  • | | Workpiece | |
  • +-------------------------------------------------------------------------+
  • 3. Ruby Ball Wear & Material Pickup (Aluminum Galling)

Synthetic ruby (single-crystal aluminum oxide, Al 2 O 3 \text{Al}_2\text{O}_3 Al 2 ​ O 3 ​ ) is extremely hard and wear-resistant. However, when repeatedly probing soft aluminum workpieces under high friction, a chemical affinity between the aluminum workpiece and the aluminum oxide ruby ball causes adhesive galling :

Microscopic particles of aluminum transfer and cold-weld onto the ruby sphere, forming irregular metallic buildup.

This buildup creates flat spots and artificial bumps on the stylus tip, causing dimensional drift of 0.0002 in. 0.0002\text{ in.} 0.0002 in. to 0.0010 in. 0.0010\text{ in.} 0.0010 in.

Prevention: When scanning or continuously inspecting aluminum alloys, replace ruby stylus tips with silicon nitride ( Si 3 N 4 \text{Si}_3\text{N}_4 Si 3 ​ N 4 ​ ) or zirconia ( ZrO 2 \text{ZrO}_2 ZrO 2 ​ ) ceramic balls, which exhibit zero chemical affinity for aluminum.

4. Excessive Probing Speed & Dynamic Deflection

If the probe touches the workpiece at a velocity different from its qualification speed, dynamic inertial forces alter the deflection of the stylus stem before triggering, introducing systematic sizing errors. Always perform measurement touches at the exact same velocity used during reference sphere qualification.

Real Shop Inspection Scenario

Scenario: A precision aerospace manufacturing facility produces a 5-axis CNC machined aluminum prismatic fuel manifold. The drawing specifies:

Datum Reference Frame: ∣ A ∣ B ∣ C ∣ |A|B|C| ∣ A ∣ B ∣ C ∣

Datum A: Primary bottom mounting face (Flatness 0.0005 in. 0.0005\text{ in.} 0.0005 in. , basic reference).

Datum B: Secondary precision dowel pin bore ∅ 0.5000 in. ± 0.0002 in. \varnothing 0.5000\text{ in.} \pm 0.0002\text{ in.} ∅ 0.5000 in. ± 0.0002 in. , perpendicular to Datum A.

Datum C: Tertiary locator slot width 0.3750 in. ± 0.0005 in. 0.3750\text{ in.} \pm 0.0005\text{ in.} 0.3750 in. ± 0.0005 in. , orienting rotation.

Critical Inspection: Verify the True Position of four internal fuel passage bores relative to Datum Reference Frame ∣ A ∣ B ∣ C ∣ |A|B|C| ∣ A ∣ B ∣ C ∣ to within ∅ 0.0015 in. \varnothing 0.0015\text{ in.} ∅ 0.0015 in. at Maximum Material Condition (MMC).

Inspection Setup & Execution on Bridge CMM:

Stylus Qualification: The inspector mounts a Renishaw PH10 motorized indexing head equipped with a TP200 strain-gage touch probe and a 3 mm 3\text{ mm} 3 mm silicon nitride stylus ball (to prevent aluminum pickup). The probe is qualified on the 19.050 mm 19.050\text{ mm} 19.050 mm ceramic reference sphere at A = 0 ∘ , B = 0 ∘ A = 0^\circ, B = 0^\circ A = 0 ∘ , B = 0 ∘ and A = 90 ∘ , B = 0 ∘ A = 90^\circ, B = 0^\circ A = 9 0 ∘ , B = 0 ∘ . Sphericity of the calibrated tip records within 0.00003 in. 0.00003\text{ in.} 0.00003 in.

Workpiece Staging: The manifold is clamped to the granite table using modular soft clamps resting on Datum A jacks. The manifold is visually aligned roughly parallel to the Y-axis (within 2 ∘ 2^\circ 2 ∘ ), but no physical squaring is required.

PCS 3-2-1 Alignment:

Primary Datum A (Level): Probes 8 points distributed across the bottom face. Software fits a plane, constrains R x , R y , T z R_x, R_y, T_z R x ​ , R y ​ , T z ​ , sets Z-axis vector normal to this plane, and sets Z = 0 Z = 0 Z = 0 .

Secondary Datum B (Origin X, Y): Probes 4 points inside the ∅ 0.5000 in. \varnothing 0.5000\text{ in.} ∅ 0.5000 in. dowel bore at two depth levels (8 points total) to create a cylinder. The cylinder axis intersects Datum A, establishing the X = 0 , Y = 0 X = 0, Y = 0 X = 0 , Y = 0 origin and constraining translations T x , T y T_x, T_y T x ​ , T y ​ .

Tertiary Datum C (Clocking / Rotation): Probes 2 points inside the locator slot to construct a centerline. Software rotates the coordinate system around the Z-axis, constraining the final rotational degree of freedom ( R z R_z R z ​ ) and clocking the X-axis through the slot centerline.

Result: All 6 degrees of freedom are fully locked in the Part Coordinate System.

Feature Measurement: The CMM program drives the probe into each of the four internal fuel passage bores, taking 8 vector touches per hole. The software fits least-squares circles, reports the actual ( X , Y ) (X, Y) ( X , Y ) coordinates in the PCS, and calculates true position: Actual True Position = 2 × ( X actual − X basic ) 2 + ( Y actual − Y basic ) 2 \text{Actual True Position} = 2 \times \sqrt{(X_{\text{actual}} - X_{\text{basic}})^2 + (Y_{\text{actual}} - Y_{\text{basic}})^2} Actual True Position = 2 × ( X actual ​ − X basic ​ ) 2 + ( Y actual ​ − Y basic ​ ) 2 ​ Adding bonus tolerance from MMC departure, all four bores report true position deviations under ∅ 0.0009 in. \varnothing 0.0009\text{ in.} ∅ 0.0009 in. , successfully passing inspection.