Study guide
4.4 Discrete Distributions: Binomial, Poisson, and Hypergeometric
ASQ Certified Quality Technician CQT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Quality Philosophies, Principles, and Management Systems
1.1 Quality Philosophies & Pioneers 1.2 Quality Management Systems, Standards & Documentation 1.3 Customer-Supplier Relationships & Quality Culture
2 Chapter 2: Cost of Quality, Teams, and Professional Ethics
2.1 Cost of Quality (COQ) & Economic Trade-Offs 2.2 Quality Improvement Teams & Meeting Management 2.3 Professional Conduct & ASQ Code of Ethics
3 Chapter 3: Basic Quality Tools & Continuous Improvement
3.1 Process Mapping, Flowcharts, and SIPOC 3.2 Cause-and-Effect Analysis & Check Sheets 3.3 Pareto Analysis & Prioritization 3.4 Histograms & Scatter Diagrams
4 Chapter 4: Descriptive Statistics and Probability Distributions
4.1 Data Types, Sampling Methods, and Populations 4.2 Measures of Central Tendency and Dispersion 4.3 Normal Distribution & Z-Score Calculations 4.4 Discrete Distributions: Binomial, Poisson, and Hypergeometric
5 Chapter 5: Statistical Process Control (SPC) Fundamentals & Variables Charts
5.1 SPC Fundamentals & Process Variation 5.2 Control Limits vs. Specification Limits 5.3 X-bar and R Charts 5.4 X-bar & s Charts and Individual-Moving Range (I-MR) Charts
6 Chapter 6: Attributes Control Charts and Out-of-Control Patterns
6.1 Control Charts for Nonconforming Units: p and np Charts 6.2 Control Charts for Nonconformities: c and u Charts 6.3 Out-of-Control Rules & Process Analysis
7 Chapter 7: Process Capability and Performance Analysis
7.1 Process Stability Prerequisite & Capability Basics 7.2 Potential Capability (Cp) and Actual Capability (Cpk) 7.3 Process Performance (Pp, Ppk) and Long-Term vs. Short-Term Variation 7.4 One-Sided Tolerances and PPM Defect Calculations
8 Chapter 8: Metrology Fundamentals, Standards, and Calibration
8.1 Metrology Foundations & Environmental Controls 8.2 Precision Gage Blocks & Standards Hierarchy 8.3 Calibration Systems & NIST Traceability 8.4 Out-of-Calibration Procedures & Reverse Traceability 8.5 M&TE Identification, Control, and Customer-Supplied Equipment
9 Chapter 9: Measurement Instruments and Measurement System Analysis (Gage R&R)
9.1 Common Dimensional Hand Measuring Instruments 9.2 Fixed Gages, Optical Comparators, and CMM Systems 9.3 Measurement System Analysis: Bias, Linearity, and Stability 9.4 Variable Gage R&R: Repeatability and Reproducibility 9.5 Electronic, Weighing, and Force Measurement Equipment
10 Chapter 10: Technical Drawings, Tolerancing, and GD&T (ASME Y14.5)
10.1 Engineering Drawing Basics & Projection Methods 10.2 Datums and the Datum Reference Frame 10.3 Form and Orientation Controls in GD&T 10.4 Location, Profile, and Runout Controls with Modifiers 10.5 Classification of Product Characteristics and Defects
11 Chapter 11: Inspection Planning, Sampling Plans, and Material Disposition
11.1 Inspection Planning & Inspection Points 11.2 Acceptance Sampling & ANSI/ASQ Z1.4 11.3 Switching Rules & Variables Sampling (Z1.9) 11.4 Nonconforming Material Control & MRB Dispositions 11.5 Types of Measurements, Unit Conversion, and Rounding Rules
12 Chapter 12: Quality Audits
12.1 Quality Auditing Principles & Types 12.2 The Audit Process: Planning, Performance, and Reporting 12.3 Audit Tools and Techniques
13 Chapter 13: Risk Management, Corrective and Preventive Action, and Safety
13.1 Risk Assessment Inputs, Monitoring, and Control Plans 13.2 FMEA, Action Priority, and Technician Workplace Safety 13.3 Root Cause Analysis & Problem-Solving 13.4 Corrective and Preventive Action (CAPA) & Verification 13.5 Preventive Action, Mistake-Proofing, and Read-Across
4.4 Discrete Distributions: Binomial, Poisson, and Hypergeometric
Key Takeaways Explain This Topic AI
The Binomial distribution models the number of nonconforming units in n independent trials with constant probability p, featuring mean μ = np and variance σ² = np(1 - p).
The Poisson distribution models counts of discrete defects occurring randomly across a continuous area of opportunity (time, area, volume), with the unique property that its mean and variance are identical (μ = σ² = λ).
The Hypergeometric distribution governs sampling without replacement from a finite lot (N), where trial outcomes are dependent because the lot's defective proportion shifts after every sampled piece.
When the sample size is at most 10% of the lot size (n / N ≤ 0.10), the Binomial distribution accurately approximates the Hypergeometric distribution; when n is large and p is small, the Poisson distribution approximates the Binomial.
Quality technicians must never confuse defects (Poisson-distributed counts per unit, tracked on c and u charts) with defectives (Binomial-distributed nonconforming parts, tracked on p and np charts).
Last updated: September 2026
- 4.4 Discrete Distributions: Binomial, Poisson, and Hypergeometric
- Fundamentals of Probability for Quality Metrology
Before evaluating discrete probability distributions, quality technicians must master the fundamental mathematical rules governing probability. An experiment is an inspection or testing activity that generates an observable outcome. The sample space ( S S S ) is the collection of all possible outcomes. An event ( A A A ) is a specific subset of outcomes within that sample space.
Fundamental Probability Axioms
For any event A A A , its probability is bounded between zero and one: 0 ≤ P ( A ) ≤ 1 0 \le P(A) \le 1 0 ≤ P ( A ) ≤ 1 where P ( A ) = 0 P(A) = 0 P ( A ) = 0 denotes an impossible outcome, and P ( A ) = 1 P(A) = 1 P ( A ) = 1 denotes an absolute certainty.
The sum of probabilities for all mutually exclusive outcomes in the sample space equals 1.0: P ( S ) = 1 P(S) = 1 P ( S ) = 1
Complement Rule : The probability that event A A A does not occur equals one minus the probability that it does occur: P ( A c ) = 1 − P ( A ) P(A^c) = 1 - P(A) P ( A c ) = 1 − P ( A )
The Addition Rule (Union of Events)
The probability that event A A A or event B B B occurs:
Mutually Exclusive (Disjoint) Events : Events that cannot occur simultaneously (e.g., a stamped part cannot be simultaneously conforming and nonconforming): P ( A ∪ B ) = P ( A ) + P ( B ) P(A \cup B) = P(A) + P(B) P ( A ∪ B ) = P ( A ) + P ( B )
Non-Mutually Exclusive Events : Events that can occur simultaneously (e.g., a circuit board can have both a soldering defect and a missing component): P ( A ∪ B ) = P ( A ) + P ( B ) − P ( A ∩ B ) P(A \cup B) = P(A) + P(B) - P(A \cap B) P ( A ∪ B ) = P ( A ) + P ( B ) − P ( A ∩ B )
The Multiplication Rule (Joint Probability)
The probability that both event A A A and event B B B occur together:
Independent Events : The occurrence of event A A A has no influence on the probability of event B B B : P ( A ∩ B ) = P ( A ) × P ( B ) P(A \cap B) = P(A) \times P(B) P ( A ∩ B ) = P ( A ) × P ( B )
Dependent Events (Conditional Probability) : The occurrence of event A A A alters the probability of event B B B : P ( A ∩ B ) = P ( A ) × P ( B ∣ A ) P(A \cap B) = P(A) \times P(B|A) P ( A ∩ B ) = P ( A ) × P ( B ∣ A ) where P ( B ∣ A ) P(B|A) P ( B ∣ A ) is the conditional probability of B B B occurring given that A A A has already occurred.
The Binomial Distribution
The Binomial distribution is the foundational model for attribute lot inspection where parts are classified into binary categories (Good vs. Defective, Conforming vs. Nonconforming, Pass vs. Fail).
The Four Mandatory BINS Conditions
For a process to be modeled by the binomial distribution, all four BINS conditions must be satisfied:
B — Binary Outcomes : Each trial results in one of only two mutually exclusive states (Success or Failure, Nonconforming or Conforming).
I — Independent Trials : The outcome of any given trial does not affect the outcome of any subsequent trial.
n — Number of Trials is Fixed : The sample size n n n is predetermined before testing begins.
S — Same Probability : The probability of nonconformance ( p p p ) remains constant across all trials. This condition is met when sampling from an ongoing continuous production stream or when sampling with replacement from a finite lot.
Binomial Probability Mass Function (PMF)
The probability of finding exactly x x x nonconforming units in a random sample of n n n units is: P ( X = x ) = ( n x ) p x ( 1 − p ) n − x = n ! x ! ( n − x ) ! p x ( 1 − p ) n − x P(X = x) = \binom{n}{x} p^x (1 - p)^{n - x} = \frac{n!}{x!(n - x)!} p^x (1 - p)^{n - x} P ( X = x ) = ( x n ) p x ( 1 − p ) n − x = x ! ( n − x )! n ! p x ( 1 − p ) n − x
where:
( n x ) = n ! x ! ( n − x ) ! \binom{n}{x} = \frac{n!}{x!(n - x)!} ( x n ) = x ! ( n − x )! n ! is the combination coefficient (the number of distinct ways to choose x x x items from n n n ).
p p p is the historical probability of obtaining a nonconforming unit.
( 1 − p ) = q (1 - p) = q ( 1 − p ) = q is the probability of obtaining a conforming unit.
- Parameters and Summary Metrics
- Mean (Expected Value) : μ = n p \mu = np μ = n p
- Variance : σ 2 = n p ( 1 − p ) \sigma^2 = np(1 - p) σ 2 = n p ( 1 − p )
- Standard Deviation : σ = n p ( 1 − p ) \sigma = \sqrt{np(1 - p)} σ = n p ( 1 − p )
- Quality Application and Worked Example
Scenario : A stamping press exhibits a historical nonconformance rate of p = 0.04 p = 0.04 p = 0.04 (4%). A quality technician selects a random sample of n = 6 n = 6 n = 6 brackets from the outgoing conveyor. What is the probability of finding:
Exactly zero nonconforming brackets?
Exactly one nonconforming bracket?
At least one nonconforming bracket?
Step 1: Exactly 0 Nonconforming Units ( x = 0 x = 0 x = 0 ) P ( X = 0 ) = ( 6 0 ) ( 0.04 ) 0 ( 0.96 ) 6 − 0 = 1 × 1 × ( 0.96 ) 6 ≈ 0.7828 ( 78.28 % ) P(X = 0) = \binom{6}{0} (0.04)^0 (0.96)^{6 - 0} = 1 \times 1 \times (0.96)^6 \approx 0.7828 \quad (78.28\%) P ( X = 0 ) = ( 0 6 ) ( 0.04 ) 0 ( 0.96 ) 6 − 0 = 1 × 1 × ( 0.96 ) 6 ≈ 0.7828 ( 78.28% )
Step 2: Exactly 1 Nonconforming Unit ( x = 1 x = 1 x = 1 ) P ( X = 1 ) = ( 6 1 ) ( 0.04 ) 1 ( 0.96 ) 6 − 1 = 6 × 0.04 × ( 0.96 ) 5 = 0.24 × 0.8154 ≈ 0.1957 ( 19.57 % ) P(X = 1) = \binom{6}{1} (0.04)^1 (0.96)^{6 - 1} = 6 \times 0.04 \times (0.96)^5 = 0.24 \times 0.8154 \approx 0.1957 \quad (19.57\%) P ( X = 1 ) = ( 1 6 ) ( 0.04 ) 1 ( 0.96 ) 6 − 1 = 6 × 0.04 × ( 0.96 ) 5 = 0.24 × 0.8154 ≈ 0.1957 ( 19.57% )
Step 3: At Least 1 Nonconforming Unit ( x ≥ 1 x \ge 1 x ≥ 1 ) Applying the complement rule: P ( X ≥ 1 ) = 1 − P ( X = 0 ) = 1 − 0.7828 = 0.2172 ( 21.72 % ) P(X \ge 1) = 1 - P(X = 0) = 1 - 0.7828 = 0.2172 \quad (21.72\%) P ( X ≥ 1 ) = 1 − P ( X = 0 ) = 1 − 0.7828 = 0.2172 ( 21.72% )
The Poisson Distribution
While the binomial distribution counts the number of nonconforming units (defectives), the Poisson distribution counts the number of discrete defects or blemishes distributed across a continuous area of opportunity (time, length, surface area, volume, or complex assembly).
Conditions for the Poisson Model
The count of events ( x x x ) occurs in a defined, continuous inspection interval (e.g., defects per 100 meters of extruded wire, voids per square meter of fiberglass sheet, blemishes per car door, solder bridges per circuit board).
The events occur independently of each other.
The average arrival or defect rate ( λ \lambda λ , lambda) is constant across the inspection unit.
The probability of two events occurring at the exact same infinitesimal point in space or time is zero (rare event model).
Poisson Probability Mass Function (PMF) P ( X = x ) = e − λ λ x x ! P(X = x) = \frac{e^{-\lambda} \lambda^x}{x!} P ( X = x ) = x ! e − λ λ x
where:
λ \lambda λ (lambda) is the average expected number of defects per inspection unit.
e ≈ 2.71828 e \approx 2.71828 e ≈ 2.71828 is Euler's mathematical constant.
x x x is the observed number of defects ( x = 0 , 1 , 2 , … x = 0, 1, 2, \dots x = 0 , 1 , 2 , … ).
The Unique Hallmark of the Poisson Distribution
In a Poisson distribution, the mean and variance are mathematically identical : μ = λ \mu = \lambda μ = λ σ 2 = λ \sigma^2 = \lambda σ 2 = λ σ = λ \sigma = \sqrt{\lambda} σ = λ
Important
Classic ASQ Exam Question: If a quality technician observes that the number of solder blemishes per board follows a Poisson distribution with an average of λ = 4.0 \lambda = 4.0 λ = 4.0 blemishes, what is the standard deviation? Answer: σ = 4.0 = 2.0 \sigma = \sqrt{4.0} = 2.0 σ = 4.0 = 2.0 blemishes. Whenever mean equals variance, suspect the Poisson distribution.
Poisson Worked Example: Automotive Paint Finish
Scenario : An automated optical inspection system audits painted truck doors, recording an average of λ = 1.5 \lambda = 1.5 λ = 1.5 paint pinholes per door. What is the probability that a randomly inspected door has:
Zero pinholes (a perfect door)?
Exactly two pinholes?
Step 1: Probability of 0 Pinholes ( x = 0 x = 0 x = 0 ) P ( X = 0 ) = e − 1.5 ( 1.5 ) 0 0 ! = 0.22313 × 1 1 ≈ 0.2231 ( 22.31 % ) P(X = 0) = \frac{e^{-1.5} (1.5)^0}{0!} = \frac{0.22313 \times 1}{1} \approx 0.2231 \quad (22.31\%) P ( X = 0 ) = 0 ! e − 1.5 ( 1.5 ) 0 = 1 0.22313 × 1 ≈ 0.2231 ( 22.31% )
Step 2: Probability of Exactly 2 Pinholes ( x = 2 x = 2 x = 2 ) P ( X = 2 ) = e − 1.5 ( 1.5 ) 2 2 ! = 0.22313 × 2.25 2 × 1 = 0.50204 2 ≈ 0.2510 ( 25.10 % ) P(X = 2) = \frac{e^{-1.5} (1.5)^2}{2!} = \frac{0.22313 \times 2.25}{2 \times 1} = \frac{0.50204}{2} \approx 0.2510 \quad (25.10\%) P ( X = 2 ) = 2 ! e − 1.5 ( 1.5 ) 2 = 2 × 1 0.22313 × 2.25 = 2 0.50204 ≈ 0.2510 ( 25.10% )
Poisson Approximation to the Binomial
When the sample size n n n is very large ( n ≥ 50 n \ge 50 n ≥ 50 or 100 100 100 ) and the probability of defect p p p is very small ( p ≤ 0.05 p \le 0.05 p ≤ 0.05 or 0.10 0.10 0.10 ), evaluating factorials in the binomial formula becomes computationally difficult. The Poisson distribution serves as an accurate approximation to the binomial by setting: λ = n p \lambda = np λ = n p
The Hypergeometric Distribution
In precision manufacturing, technicians frequently inspect parts drawn from a small, finite lot without replacement (e.g., pulling 5 surgical drill bits from a sterile lot container of 25). Under sampling without replacement, the outcome of each draw directly alters the probability of defect on the next draw. The trials are dependent , violating the constant-probability assumption of the Binomial distribution. In this case, the Hypergeometric distribution must be used.
Conditions for the Hypergeometric Model
The population consists of a known, finite lot of size N N N .
The lot contains exactly D D D nonconforming units and N − D N - D N − D conforming units.
A sample of n n n units is drawn without replacement .
Each draw is dependent; the probability of drawing a defective shifts after each selection.
Hypergeometric Probability Mass Function (PMF) P ( X = x ) = ( D x ) ( N − D n − x ) ( N n ) P(X = x) = \frac{\binom{D}{x} \binom{N - D}{n - x}}{\binom{N}{n}} P ( X = x ) = ( n N ) ( x D ) ( n − x N − D )
where:
N N N = total population lot size.
D D D = total number of nonconforming units in the lot.
n n n = sample size drawn.
x x x = number of nonconforming units observed in the sample.
( D x ) \binom{D}{x} ( x D ) = ways to choose x x x nonconforming units from the D D D available.
( N − D n − x ) \binom{N - D}{n - x} ( n − x N − D ) = ways to choose ( n − x ) (n - x) ( n − x ) conforming units from the ( N − D ) (N - D) ( N − D ) available.
( N n ) \binom{N}{n} ( n N ) = total possible ways to draw n n n units from lot N N N .
- Mean and Variance of the Hypergeometric Distribution
- Mean : μ = n ( D N ) = n p \mu = n \left(\frac{D}{N}\right) = np μ = n ( N D ) = n p
Variance : σ 2 = n ( D N ) ( 1 − D N ) ( N − n N − 1 ) \sigma^2 = n \left(\frac{D}{N}\right) \left(1 - \frac{D}{N}\right) \left(\frac{N - n}{N - 1}\right) σ 2 = n ( N D ) ( 1 − N D ) ( N − 1 N − n )
Notice that the variance formula is identical to the Binomial variance multiplied by the Finite Population Correction Factor (FPCF) : N − n N − 1 \frac{N - n}{N - 1} N − 1 N − n . As lot size N N N grows large relative to sample size n n n , the FPCF approaches 1.0.
Hypergeometric Worked Example: Medical Pin Lot Acceptance
Scenario : A receiving lot consists of N = 20 N = 20 N = 20 precision titanium medical implants. Unknown to the technician, exactly D = 4 D = 4 D = 4 implants have burrs. The technician randomly selects n = 3 n = 3 n = 3 implants without replacement . What is the probability of finding exactly x = 1 x = 1 x = 1 nonconforming implant?
Step 1: Compute Combinations
Ways to pick 1 defective from 4: ( 4 1 ) = 4 ! 1 ! 3 ! = 4 \binom{4}{1} = \frac{4!}{1!3!} = 4 ( 1 4 ) = 1 ! 3 ! 4 ! = 4
Ways to pick 2 good implants from the 16 conforming ( 20 − 4 = 16 20 - 4 = 16 20 − 4 = 16 ): ( 16 2 ) = 16 × 15 2 × 1 = 120 \binom{16}{2} = \frac{16 \times 15}{2 \times 1} = 120 ( 2 16 ) = 2 × 1 16 × 15 = 120
Total ways to pick 3 implants from the lot of 20: ( 20 3 ) = 20 × 19 × 18 3 × 2 × 1 = 1 , 140 \binom{20}{3} = \frac{20 \times 19 \times 18}{3 \times 2 \times 1} = 1,140 ( 3 20 ) = 3 × 2 × 1 20 × 19 × 18 = 1 , 140
Step 2: Calculate Probability P ( X = 1 ) = ( 4 1 ) ( 16 2 ) ( 20 3 ) = 4 × 120 1 , 140 = 480 1 , 140 ≈ 0.4211 ( 42.11 % ) P(X = 1) = \frac{\binom{4}{1} \binom{16}{2}}{\binom{20}{3}} = \frac{4 \times 120}{1,140} = \frac{480}{1,140} \approx 0.4211 \quad (42.11\%) P ( X = 1 ) = ( 3 20 ) ( 1 4 ) ( 2 16 ) = 1 , 140 4 × 120 = 1 , 140 480 ≈ 0.4211 ( 42.11% )
When Does the Binomial Approximate the Hypergeometric?
Calculating factorials for large lots is tedious. Quality engineering standards establish the following rule of thumb: If n N ≤ 0.10 ( 10 % rule ) \text{If } \frac{n}{N} \le 0.10 \quad (10\% \text{ rule}) If N n ≤ 0.10 ( 10% rule )
When the sample size n n n represents 10% or less of the total lot size N N N , sampling without replacement has a negligible impact on lot proportion p p p . In this case, the Binomial distribution provides an excellent, mathematically simple approximation to the Hypergeometric distribution. If n / N > 0.10 n / N > 0.10 n / N > 0.10 , the Hypergeometric distribution is mandatory.
Master Comparison Table: Discrete Distributions for Quality Inspection
Distribution Primary Metric / Unit Sample Assumption Mean ( μ \mu μ ) Variance ( σ 2 \sigma^2 σ 2 ) Key Approximations SPC Chart Association
Binomial Defectives (nonconforming parts) Fixed n n n , binary outcomes, independent trials (constant p p p ) n p np n p n p ( 1 − p ) np(1 - p) n p ( 1 − p ) Approximates Hypergeometric when n / N ≤ 0.10 n/N \le 0.10 n / N ≤ 0.10 p p p -chart (fraction def.), n p np n p -chart (number def.)
Poisson Defects (blemish counts per unit area/time) Count of rare events across continuous area of opportunity λ \lambda λ λ \lambda λ Approximates Binomial when n ≥ 50 n \ge 50 n ≥ 50 and p ≤ 0.10 p \le 0.10 p ≤ 0.10 c c c -chart (constant unit), u u u -chart (variable units)
Hypergeometric Defectives (nonconforming parts) Finite lot N N N , sampling without replacement (dependent trials) n ( D / N ) n(D/N) n ( D / N ) n ( D / N ) ( 1 − D / N ) × ( N − n N − 1 ) n(D/N)(1 - D/N) \times \left(\frac{N - n}{N - 1}\right) n ( D / N ) ( 1 − D / N ) × ( N − 1 N − n ) Replaced by Binomial when n / N ≤ 0.10 n/N \le 0.10 n / N ≤ 0.10 Lot acceptance sampling plans (ANSI/ASQ Z1.4)
Defect vs. Defective: The Critical Metrology Distinction
A frequent source of confusion on the ASQ CQT exam is the operational difference between a defect and a defective :
Defective (Nonconforming Unit) : An entire part, component, or assembly that fails to meet one or more engineering specifications, rendering the part unserviceable or noncompliant. A part is binary: either it is defective, or it is conforming. Modeled by Binomial or Hypergeometric distributions ( p p p and n p np n p charts).
Defect (Nonconformance) : A specific instance of a flaw, blemish, or departure from specification on an inspected unit. A single defective part may contain multiple distinct defects. For example, an automotive bumper cover (one unit) might have 3 paint runs, 1 scratch, and 2 unpunched mounting holes—representing 1 defective part containing 6 defects. Modeled by the Poisson distribution ( c c c and u u u charts).