Study guide
7.2 Potential Capability (Cp) and Actual Capability (Cpk)
ASQ Certified Quality Technician CQT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Quality Philosophies, Principles, and Management Systems
1.1 Quality Philosophies & Pioneers 1.2 Quality Management Systems, Standards & Documentation 1.3 Customer-Supplier Relationships & Quality Culture
2 Chapter 2: Cost of Quality, Teams, and Professional Ethics
2.1 Cost of Quality (COQ) & Economic Trade-Offs 2.2 Quality Improvement Teams & Meeting Management 2.3 Professional Conduct & ASQ Code of Ethics
3 Chapter 3: Basic Quality Tools & Continuous Improvement
3.1 Process Mapping, Flowcharts, and SIPOC 3.2 Cause-and-Effect Analysis & Check Sheets 3.3 Pareto Analysis & Prioritization 3.4 Histograms & Scatter Diagrams
4 Chapter 4: Descriptive Statistics and Probability Distributions
4.1 Data Types, Sampling Methods, and Populations 4.2 Measures of Central Tendency and Dispersion 4.3 Normal Distribution & Z-Score Calculations 4.4 Discrete Distributions: Binomial, Poisson, and Hypergeometric
5 Chapter 5: Statistical Process Control (SPC) Fundamentals & Variables Charts
5.1 SPC Fundamentals & Process Variation 5.2 Control Limits vs. Specification Limits 5.3 X-bar and R Charts 5.4 X-bar & s Charts and Individual-Moving Range (I-MR) Charts
6 Chapter 6: Attributes Control Charts and Out-of-Control Patterns
6.1 Control Charts for Nonconforming Units: p and np Charts 6.2 Control Charts for Nonconformities: c and u Charts 6.3 Out-of-Control Rules & Process Analysis
7 Chapter 7: Process Capability and Performance Analysis
7.1 Process Stability Prerequisite & Capability Basics 7.2 Potential Capability (Cp) and Actual Capability (Cpk) 7.3 Process Performance (Pp, Ppk) and Long-Term vs. Short-Term Variation 7.4 One-Sided Tolerances and PPM Defect Calculations
8 Chapter 8: Metrology Fundamentals, Standards, and Calibration
8.1 Metrology Foundations & Environmental Controls 8.2 Precision Gage Blocks & Standards Hierarchy 8.3 Calibration Systems & NIST Traceability 8.4 Out-of-Calibration Procedures & Reverse Traceability 8.5 M&TE Identification, Control, and Customer-Supplied Equipment
9 Chapter 9: Measurement Instruments and Measurement System Analysis (Gage R&R)
9.1 Common Dimensional Hand Measuring Instruments 9.2 Fixed Gages, Optical Comparators, and CMM Systems 9.3 Measurement System Analysis: Bias, Linearity, and Stability 9.4 Variable Gage R&R: Repeatability and Reproducibility 9.5 Electronic, Weighing, and Force Measurement Equipment
10 Chapter 10: Technical Drawings, Tolerancing, and GD&T (ASME Y14.5)
10.1 Engineering Drawing Basics & Projection Methods 10.2 Datums and the Datum Reference Frame 10.3 Form and Orientation Controls in GD&T 10.4 Location, Profile, and Runout Controls with Modifiers 10.5 Classification of Product Characteristics and Defects
11 Chapter 11: Inspection Planning, Sampling Plans, and Material Disposition
11.1 Inspection Planning & Inspection Points 11.2 Acceptance Sampling & ANSI/ASQ Z1.4 11.3 Switching Rules & Variables Sampling (Z1.9) 11.4 Nonconforming Material Control & MRB Dispositions 11.5 Types of Measurements, Unit Conversion, and Rounding Rules
12 Chapter 12: Quality Audits
12.1 Quality Auditing Principles & Types 12.2 The Audit Process: Planning, Performance, and Reporting 12.3 Audit Tools and Techniques
13 Chapter 13: Risk Management, Corrective and Preventive Action, and Safety
13.1 Risk Assessment Inputs, Monitoring, and Control Plans 13.2 FMEA, Action Priority, and Technician Workplace Safety 13.3 Root Cause Analysis & Problem-Solving 13.4 Corrective and Preventive Action (CAPA) & Verification 13.5 Preventive Action, Mistake-Proofing, and Read-Across
7.2 Potential Capability (Cp) and Actual Capability (Cpk)
Key Takeaways Explain This Topic AI
The potential capability index Cp = (USL - LSL) / (6σ_within) measures the ratio of specification width to inherent process spread, evaluating what the process could achieve if perfectly centered.
The actual capability index Cpk = min(Cpu, Cpl) accounts for both process dispersion and process centering relative to the nearest specification limit.
Cpk is mathematically always less than or equal to Cp (Cpk <= Cp); equality occurs if and only if the process mean is perfectly centered at the midpoint of the specification limits (k = 0).
The centering factor k = |μ - m| / ((USL - LSL)/2) measures the proportion of the tolerance band consumed by off-center drift, linking the indices by Cpk = Cp * (1 - k).
Standard industrial benchmarks define Cp/Cpk < 1.00 as incapable, 1.00 as marginally capable (3-sigma), 1.33 as standard industrial capability (4-sigma), 1.67 as critical/safety capability (5-sigma), and >= 2.00 as world-class Six Sigma capability.
Last updated: September 2026
- 7.2 Potential Capability (Cp) and Actual Capability (Cpk)
- The Dual Dimensions of Process Capability
When assessing a manufacturing process, quality technicians must evaluate two entirely independent characteristics:
Process Spread (Dispersion) : How wide is the distribution of individual part dimensions? Does the equipment possess the inherent precision to fit inside the blueprint tolerance band?
Process Centering (Location) : Where is the process distribution positioned relative to the target nominal or specification midpoint? Is the process running centered, or has it drifted toward the upper or lower specification limit?
To separate and evaluate these two dimensions, the quality profession relies on two foundational indices: C p C_p C p (Process Potential) and C p k C_{pk} C p k (Actual Process Capability).
Potential Capability Index ( C p C_p C p ): Measuring Process Spread
The potential capability index ( C p C_p C p ) measures the maximum theoretical capability the process could achieve if its distribution were centered perfectly between the engineering specification limits. It represents the ratio of the allowable tolerance width to the inherent 6 σ 6\sigma 6 σ natural process spread.
Mathematical Formula for C p C_p C p C p = U S L − L S L 6 σ ^ w i t h i n C_p = \frac{USL - LSL}{6\hat{\sigma}_{within}} C p = 6 σ ^ w i t hin U S L − L S L
Where:
- U S L USL U S L : Upper Specification Limit
- L S L LSL L S L : Lower Specification Limit
- U S L − L S L USL - LSL U S L − L S L : Total allowable engineering tolerance width (Voice of Customer)
6 σ ^ w i t h i n 6\hat{\sigma}_{within} 6 σ ^ w i t hin : Total inherent natural process spread (Voice of Process)
σ ^ w i t h i n \hat{\sigma}_{within} σ ^ w i t hin : Within-subgroup standard deviation, representing short-term common-cause variation
Estimating Within-Subgroup Standard Deviation ( σ ^ w i t h i n \hat{\sigma}_{within} σ ^ w i t hin )
In standard capability studies, σ \sigma σ is not calculated using the sample standard deviation formula across all pooled parts. Instead, it is estimated directly from the rational subgroup statistics of a stable control chart:
From an X ˉ \bar{X} X ˉ and R R R Chart : σ ^ w i t h i n = R ˉ d 2 \hat{\sigma}_{within} = \frac{\bar{R}}{d_2} σ ^ w i t hin = d 2 R ˉ (where R ˉ \bar{R} R ˉ is the average subgroup range and d 2 d_2 d 2 is the Shewhart bias correction factor for subgroup size n n n ) .
From an X ˉ \bar{X} X ˉ and s s s Chart : σ ^ w i t h i n = s ˉ c 4 \hat{\sigma}_{within} = \frac{\bar{s}}{c_4} σ ^ w i t hin = c 4 s ˉ (where s ˉ \bar{s} s ˉ is the average subgroup standard deviation and c 4 c_4 c 4 is the bias correction factor for subgroup size n n n ) .
Standard Unbiasing Constants Table ( d 2 d_2 d 2 and c 4 c_4 c 4 )
- Subgroup Size ( n n n ) Range Factor ( d 2 d_2 d 2 ) Standard Deviation Factor ( c 4 c_4 c 4 )
- 2 1.128 0.7979
- 3 1.693 0.8862
- 4 2.059 0.9213
- 5 2.326 0.9400
- 6 2.534 0.9515
- 7 2.704 0.9594
- 8 2.847 0.9650
- 9 2.970 0.9693
- 10 3.078 0.9727
- Why C p C_p C p is Blind to Process Centering
Notice that the formula for C p C_p C p contains only U S L USL U S L , L S L LSL L S L , and σ ^ w i t h i n \hat{\sigma}_{within} σ ^ w i t hin . The process average ( μ \mu μ or X ˉ ˉ \bar{\bar{X}} X ˉ ˉ ) does not appear in the formula!
Consequently, a process can have a stellar C p C_p C p of 2.50, but if the machine tool is set incorrectly and running 5 millimeters above the upper specification limit, 100% of production will be scrap! C p C_p C p tells you only whether the process spread could fit inside the specifications, never whether it is actually inside them.
Industrial Capability Benchmarks for C p C_p C p
C p C_p C p Value Quality Level Natural Spread vs. Tolerance Operational Meaning
C p < 1.00 C_p < 1.00 C p < 1.00 < 3 σ < 3\sigma < 3 σ 6 σ > ( U S L − L S L ) 6\sigma > (USL - LSL) 6 σ > ( U S L − L S L ) Incapable : Process spread is wider than the tolerance. Nonconforming parts are mathematically guaranteed even if centered.
C p = 1.00 C_p = 1.00 C p = 1.00 3 σ 3\sigma 3 σ 6 σ = ( U S L − L S L ) 6\sigma = (USL - LSL) 6 σ = ( U S L − L S L ) Marginally Capable : Spread exactly equals tolerance. Produces 2,700 PPM defects when perfectly centered. Zero margin for error.
C p = 1.33 C_p = 1.33 C p = 1.33 4 σ 4\sigma 4 σ 8 σ = ( U S L − L S L ) 8\sigma = (USL - LSL) 8 σ = ( U S L − L S L ) Standard Industrial Capability : The established minimum benchmark for ongoing production of non-critical characteristics.
C p = 1.67 C_p = 1.67 C p = 1.67 5 σ 5\sigma 5 σ 10 σ = ( U S L − L S L ) 10\sigma = (USL - LSL) 10 σ = ( U S L − L S L ) Critical Characteristic Benchmark : Required for new tooling, safety-critical features, and automotive PPAP approval.
C p ≥ 2.00 C_p \ge 2.00 C p ≥ 2.00 6 σ 6\sigma 6 σ 12 σ ≤ ( U S L − L S L ) 12\sigma \le (USL - LSL) 12 σ ≤ ( U S L − L S L ) World-Class / Six Sigma : The tolerance band is twice as wide as the process spread, providing robust protection against drift.
Actual Capability Index ( C p k C_{pk} C p k ): Measuring Centering and Spread
To assess how well the process is actually performing relative to specifications, technicians calculate the actual capability index ( C p k C_{pk} C p k ) . The subscript "k" originates from the Japanese word katayori , meaning "bias" or "offset."
C p k C_{pk} C p k calculates capability to the upper specification limit ( C p u C_{pu} C p u ) and lower specification limit ( C p l C_{pl} C pl ) independently, and selects the minimum of the two.
Mathematical Formulas for C p k C_{pk} C p k C p u = U S L − μ 3 σ ^ w i t h i n C_{pu} = \frac{USL - \mu}{3\hat{\sigma}_{within}} C p u = 3 σ ^ w i t hin U S L − μ C p l = μ − L S L 3 σ ^ w i t h i n C_{pl} = \frac{\mu - LSL}{3\hat{\sigma}_{within}} C pl = 3 σ ^ w i t hin μ − L S L C p k = min ( C p u , C p l ) C_{pk} = \min(C_{pu}, C_{pl}) C p k = min ( C p u , C pl )
Where μ \mu μ is the estimated process mean (the grand average X ˉ ˉ \bar{\bar{X}} X ˉ ˉ from the control chart).
Why C p k C_{pk} C p k Takes the Minimum
The divisor in C p u C_{pu} C p u and C p l C_{pl} C pl is 3 σ 3\sigma 3 σ (representing the distance from the mean to one natural process limit), rather than 6 σ 6\sigma 6 σ .
By selecting min ( C p u , C p l ) \min(C_{pu}, C_{pl}) min ( C p u , C pl ) , C p k C_{pk} C p k reflects the performance at the worst-case specification boundary —the specification limit that is closest to the process average. Defective parts will always emerge first at the specification limit closest to the mean! LSL Mean (μ) USL
- | | |
- | | |
- Process | * * * * | |
- Distribution: * * * * * * * * | |
- | * * * * * * * * * * * * |
- +----------------------+----------------+
- |<---- Cpl (3.0σ) ---->|<-- Cpu (1.0σ)->|
- Worst-case boundary is USL: Cpk = min(Cpl, Cpu) = Cpu = 1.0
- Interpreting Extreme C p k C_{pk} C p k Values
C p k = C p C_{pk} = C_p C p k = C p : The process mean is located exactly at the specification midpoint. Maximum possible capability is achieved.
0 < C p k < 1.00 0 < C_{pk} < 1.00 0 < C p k < 1.00 : The process is producing nonconforming product because the natural limit exceeds the nearest specification limit.
C p k = 0 C_{pk} = 0 C p k = 0 : The process mean is located directly on one of the specification limits ( μ = U S L \mu = USL μ = U S L or μ = L S L \mu = LSL μ = L S L ). Exactly 50% of production is nonconforming.
C p k < 0 C_{pk} < 0 C p k < 0 (Negative C p k C_{pk} C p k ) : The process mean has drifted completely outside the engineering specification limits (e.g., μ > U S L \mu > USL μ > U S L ). More than 50% of production is nonconforming scrap.
The Mathematical Relationship: C p C_p C p , C p k C_{pk} C p k , and the k k k -Factor
The mathematical bridge connecting C p C_p C p and C p k C_{pk} C p k is governed by the process centering factor ( k k k ) .
Defining the Centering Factor ( k k k )
Let m m m represent the engineering specification midpoint, and d d d represent the half-specification width: m = U S L + L S L 2 m = \frac{USL + LSL}{2} m = 2 U S L + L S L d = U S L − L S L 2 d = \frac{USL - LSL}{2} d = 2 U S L − L S L
The centering factor k k k measures the ratio of the mean's offset from midpoint to the available half-tolerance: k = ∣ μ − m ∣ d = ∣ μ − m ∣ U S L − L S L 2 k = \frac{|\mu - m|}{d} = \frac{|\mu - m|}{\frac{USL - LSL}{2}} k = d ∣ μ − m ∣ = 2 U S L − L S L ∣ μ − m ∣
Properties of k k k
k = 0 k = 0 k = 0 : The process is perfectly centered on target ( μ = m \mu = m μ = m ).
0 < k < 1 0 < k < 1 0 < k < 1 : The process mean is inside the specification band but off-center.
k = 1 k = 1 k = 1 : The process mean sits exactly on a specification limit ( ∣ μ − m ∣ = d |\mu - m| = d ∣ μ − m ∣ = d ).
k > 1 k > 1 k > 1 : The process mean lies outside the specification limits.
The Fundamental Identity
The relationship between potential capability, actual capability, and centering is: C p k = C p ( 1 − k ) C_{pk} = C_p(1 - k) C p k = C p ( 1 − k )
From this equation, two immutable mathematical truths emerge:
C p k ≤ C p C_{pk} \le C_p C p k ≤ C p always : Actual capability can never exceed potential capability ( C p k C_{pk} C p k cannot be greater than C p C_p C p ).
C p k = C p C_{pk} = C_p C p k = C p if and only if k = 0 k = 0 k = 0 : The only way C p k C_{pk} C p k can equal C p C_p C p is for the process to be centered with zero offset.
Diagnostic Matrix: Comparing C p C_p C p and C p k C_{pk} C p k to Guide Action
A quality technician uses the comparison between C p C_p C p and C p k C_{pk} C p k as a powerful shop-floor diagnostic tool to decide whether to adjust machine settings or call for tooling overhaul.
Diagnostic Condition Statistical Finding Physical Meaning on Shop Floor Corrective Action Strategy
C p ≥ 1.33 C_p \ge 1.33 C p ≥ 1.33 ; C p k ≥ 1.33 C_{pk} \ge 1.33 C p k ≥ 1.33 Process spread is narrow, and process mean is well-centered. The process is fully capable of meeting customer specifications reliably. Maintain control : Continue regular SPC charting; investigate opportunities for continuous improvement or sampling reduction.
C p ≥ 1.33 C_p \ge 1.33 C p ≥ 1.33 ; C p k < 1.00 C_{pk} < 1.00 C p k < 1.00 Process spread is narrow (good precision), but mean is severely off-center. The machine has the inherent precision to make good parts, but the setup or tool offset is wrong. Re-center the process (Low Cost) : Adjust CNC tool offset, align fixtures, re-zero stops, adjust temperature/pressure. Do NOT rebuild the machine!
C p < 1.00 C_p < 1.00 C p < 1.00 ; C p k < 1.00 C_{pk} < 1.00 C p k < 1.00 Process spread is too wide ( 6 σ > Tolerance 6\sigma > \text{Tolerance} 6 σ > Tolerance ), regardless of centering. The equipment lacks the inherent mechanical precision to meet specifications. Fundamental Engineering Overhaul (High Cost) : Rebuild spindle bearings, replace worn tooling, improve raw material uniformity, redesign part tolerances. Centering will not fix defects.
C p < 1.00 C_p < 1.00 C p < 1.00 ; C p k ≥ 1.33 C_{pk} \ge 1.33 C p k ≥ 1.33 Mathematically Impossible C p k C_{pk} C p k can never exceed C p C_p C p . Check your arithmetic! An error occurred in estimating σ \sigma σ , entering limits, or calculating formulas.
- Step-by-Step Worked Numerical Calculations
- Worked Example 1: Full Capability Calculation from Control Chart Data
Scenario : A technician at an aerospace machine shop monitors a titanium fastener diameter on an automated CNC lathe. Blueprints specify a diameter of 12.000 ± 0.050 mm 12.000 \pm 0.050\text{ mm} 12.000 ± 0.050 mm ( U S L = 12.050 mm , L S L = 11.950 mm USL = 12.050\text{ mm}, LSL = 11.950\text{ mm} U S L = 12.050 mm , L S L = 11.950 mm ).
A capability study of 25 rational subgroups of n = 5 n = 5 n = 5 parts confirms the process is in statistical control. The control chart yields:
- Grand Average: X ˉ ˉ = 12.015 mm \bar{\bar{X}} = 12.015\text{ mm} X ˉ ˉ = 12.015 mm
- Average Range: R ˉ = 0.028 mm \bar{R} = 0.028\text{ mm} R ˉ = 0.028 mm
For subgroup size n = 5 n = 5 n = 5 , the unbiasing factor is d 2 = 2.326 d_2 = 2.326 d 2 = 2.326 .
Step 1: Estimate Within-Subgroup Standard Deviation ( σ ^ w i t h i n \hat{\sigma}_{within} σ ^ w i t hin ) σ ^ w i t h i n = R ˉ d 2 = 0.028 2.326 = 0.0120378 mm \hat{\sigma}_{within} = \frac{\bar{R}}{d_2} = \frac{0.028}{2.326} = 0.0120378\text{ mm} σ ^ w i t hin = d 2 R ˉ = 2.326 0.028 = 0.0120378 mm
Step 2: Calculate Total Specification Width and Process Spread Tolerance Width = U S L − L S L = 12.050 − 11.950 = 0.100 mm \text{Tolerance Width} = USL - LSL = 12.050 - 11.950 = 0.100\text{ mm} Tolerance Width = U S L − L S L = 12.050 − 11.950 = 0.100 mm 6 σ ^ w i t h i n = 6 × 0.0120378 = 0.072227 mm 6\hat{\sigma}_{within} = 6 \times 0.0120378 = 0.072227\text{ mm} 6 σ ^ w i t hin = 6 × 0.0120378 = 0.072227 mm 3 σ ^ w i t h i n = 3 × 0.0120378 = 0.036113 mm 3\hat{\sigma}_{within} = 3 \times 0.0120378 = 0.036113\text{ mm} 3 σ ^ w i t hin = 3 × 0.0120378 = 0.036113 mm
Step 3: Calculate Potential Capability ( C p C_p C p ) C p = U S L − L S L 6 σ ^ w i t h i n = 0.100 0.072227 = 1.3845 ≈ 1.38 C_p = \frac{USL - LSL}{6\hat{\sigma}_{within}} = \frac{0.100}{0.072227} = 1.3845 \approx 1.38 C p = 6 σ ^ w i t hin U S L − L S L = 0.072227 0.100 = 1.3845 ≈ 1.38
Interpretation : Since C p = 1.38 > 1.33 C_p = 1.38 > 1.33 C p = 1.38 > 1.33 , the process possesses adequate potential capability.
Step 4: Calculate Upper and Lower Capability ( C p u C_{pu} C p u and C p l C_{pl} C pl ) C p u = U S L − X ˉ ˉ 3 σ ^ w i t h i n = 12.050 − 12.015 0.036113 = 0.035 0.036113 = 0.9692 ≈ 0.97 C_{pu} = \frac{USL - \bar{\bar{X}}}{3\hat{\sigma}_{within}} = \frac{12.050 - 12.015}{0.036113} = \frac{0.035}{0.036113} = 0.9692 \approx 0.97 C p u = 3 σ ^ w i t hin U S L − X ˉ ˉ = 0.036113 12.050 − 12.015 = 0.036113 0.035 = 0.9692 ≈ 0.97 C p l = X ˉ ˉ − L S L 3 σ ^ w i t h i n = 12.015 − 11.950 0.036113 = 0.065 0.036113 = 1.7999 ≈ 1.80 C_{pl} = \frac{\bar{\bar{X}} - LSL}{3\hat{\sigma}_{within}} = \frac{12.015 - 11.950}{0.036113} = \frac{0.065}{0.036113} = 1.7999 \approx 1.80 C pl = 3 σ ^ w i t hin X ˉ ˉ − L S L = 0.036113 12.015 − 11.950 = 0.036113 0.065 = 1.7999 ≈ 1.80
Step 5: Determine Actual Capability ( C p k C_{pk} C p k ) C p k = min ( C p u , C p l ) = min ( 0.97 , 1.80 ) = 0.97 C_{pk} = \min(C_{pu}, C_{pl}) = \min(0.97, 1.80) = 0.97 C p k = min ( C p u , C pl ) = min ( 0.97 , 1.80 ) = 0.97
Interpretation : Even though potential capability is acceptable ( C p = 1.38 C_p = 1.38 C p = 1.38 ), actual capability fails customer standards ( C p k = 0.97 < 1.33 C_{pk} = 0.97 < 1.33 C p k = 0.97 < 1.33 ). The process is running closer to the upper specification limit, creating nonconformance risk at the upper boundary.
Step 6: Verify Using the Centering Factor ( k k k ) m = 12.050 + 11.950 2 = 12.000 mm m = \frac{12.050 + 11.950}{2} = 12.000\text{ mm} m = 2 12.050 + 11.950 = 12.000 mm d = 0.100 2 = 0.050 mm d = \frac{0.100}{2} = 0.050\text{ mm} d = 2 0.100 = 0.050 mm k = ∣ 12.015 − 12.000 ∣ 0.050 = 0.015 0.050 = 0.300 ( 30 % offset ) k = \frac{|12.015 - 12.000|}{0.050} = \frac{0.015}{0.050} = 0.300 \quad (30\% \text{ offset}) k = 0.050 ∣12.015 − 12.000∣ = 0.050 0.015 = 0.300 ( 30% offset ) C p k = C p ( 1 − k ) = 1.3845 × ( 1 − 0.300 ) = 1.3845 × 0.700 = 0.9692 ≈ 0.97 C_{pk} = C_p(1 - k) = 1.3845 \times (1 - 0.300) = 1.3845 \times 0.700 = 0.9692 \approx 0.97 C p k = C p ( 1 − k ) = 1.3845 × ( 1 − 0.300 ) = 1.3845 × 0.700 = 0.9692 ≈ 0.97
Exact verification confirms the calculation.
Worked Example 2: Determining Required Machine Adjustment
From Worked Example 1, the technician must recommend a corrective action.
Because C p = 1.38 C_p = 1.38 C p = 1.38 is already capable, the machine has plenty of precision.
To achieve C p k = C p = 1.38 C_{pk} = C_p = 1.38 C p k = C p = 1.38 , the technician needs k = 0 k = 0 k = 0 .
Action : Shift the machine tool offset down by exactly 0.015 mm 0.015\text{ mm} 0.015 mm (from X ˉ ˉ = 12.015 mm \bar{\bar{X}} = 12.015\text{ mm} X ˉ ˉ = 12.015 mm to target m = 12.000 mm m = 12.000\text{ mm} m = 12.000 mm ).
Once re-centered, C p k C_{pk} C p k will immediately jump from 0.97 0.97 0.97 to 1.38 1.38 1.38 without spending a single dollar on tooling or machine overhauls!
- Quality Technician Inspection Scenarios & Common Exam Traps
- Real-World Shop Scenario: CNC Swiss-Lathe Medical Bone Screw
A technician inspecting titanium bone screw thread pitch diameters calculates C p = 2.10 C_p = 2.10 C p = 2.10 and C p k = 1.15 C_{pk} = 1.15 C p k = 1.15 . The operator argues that the machine is performing at a "world-class Six Sigma level" because C p > 2.00 C_p > 2.00 C p > 2.00 . The technician must correct the operator: while the machine's inherent dispersion is exceptional ( C p = 2.10 C_p = 2.10 C p = 2.10 ), the actual process is currently unacceptable ( C p k = 1.15 < 1.33 C_{pk} = 1.15 < 1.33 C p k = 1.15 < 1.33 ) due to thermal expansion in the lathe headstock causing the mean to run hot toward the upper spec. A simple coolant temperature adjustment will re-center the mean and unlock the machine's true potential.
Common Exam Traps for CQT Candidates
Exam Trap 1: Calculating C p k C_{pk} C p k with Pooled Sample Standard Deviation : Never use s s s (from all pooled data) to calculate C p C_p C p or C p k C_{pk} C p k ! Standard capability formulas strictly require within-subgroup variation ( R ˉ / d 2 \bar{R}/d_2 R ˉ / d 2 or s ˉ / c 4 \bar{s}/c_4 s ˉ / c 4 ). Using s s s calculates process performance ( P p , P p k P_p, P_{pk} P p , P p k ), not capability.
Exam Trap 2: Selecting the Maximum Instead of Minimum for C p k C_{pk} C p k : Always choose min ( C p u , C p l ) \min(C_{pu}, C_{pl}) min ( C p u , C pl ) . An exam distracter will invariably offer the maximum of the two or their simple average.
Exam Trap 3: Believing C p k C_{pk} C p k Can Exceed C p C_p C p : If you calculate C p k = 1.45 C_{pk} = 1.45 C p k = 1.45 and C p = 1.20 C_p = 1.20 C p = 1.20 , STOP immediately. Mathematically, C p k ≤ C p C_{pk} \le C_p C p k ≤ C p . You have swapped formulas or made an arithmetic mistake.
Exam Trap 4: Forgetting the Factor of 3 vs. 6 : Remember that C p C_p C p divides the full tolerance by 6 σ 6\sigma 6 σ , while C p u C_{pu} C p u and C p l C_{pl} C pl divide the single-sided distance by 3 σ 3\sigma 3 σ .