Study guide

11.4 AWWA M14, EPA 816-R-03-002, and SDWA Framework

ASSE 5110 Backflow Prevention Assembly Tester Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 About ASSE 5110 and the Series 5000 Program 1.2 Eligibility, 40-Hour Course, Written & Practical Format 1.3 Validity, Recertification, and Retake Rules

2 Hydraulics Fundamentals

2.1 Pressure, Head, and Atmospheric Reference 2.2 Static vs Flowing Conditions for Testers 2.3 PSID and How Differentials Are Measured

3 Backpressure, Backsiphonage & Differentials

3.1 Backpressure: Causes and Field Examples 3.2 Backsiphonage: Causes and Field Examples 3.3 How Differentials Drive Relief and Air-Inlet Action 3.4 When and Why Backflow Occurs in Distribution Systems

4 Cross-Connection Recognition

4.1 Health Hazard vs Non-Health Hazard Classification 4.2 Common Cross-Connections and Correct Protection 4.3 Containment vs Isolation Strategies

5 RP and DC Assemblies

5.1 RP (ASSE 1013) Components and Operation 5.2 RP Relief Valve Theory and Zone Protection 5.3 DC (ASSE 1015) Components and Operation 5.4 When to Use RP vs DC

6 PVB, SVB & Detector Assemblies

6.1 PVB (ASSE 1020) Components and Operation 6.2 SVB (ASSE 1056) Components and Operation 6.3 RPDA and DCDA Detector Assemblies (1047/1048) 6.4 Non-Testable Devices Testers Must Recognize

7 Test Equipment & Calibration

7.1 Three-Valve Differential Pressure Gauges 7.2 Five-Valve Gauges and Hose Discipline 7.3 Bleeding, Hookup Sequence, and Air Elimination 7.4 Calibration, Accuracy, and Field Verification

8 RP & DC Field Test Procedures

8.1 RP Field Test Procedure (USC 10th Edition) 8.2 RP Pass/Fail Criteria and Troubleshooting 8.3 DC Field Test Procedure 8.4 DC Failures and Common Causes

9 PVB/SVB Tests & Practical Sequence

9.1 PVB Field Test Procedure 9.2 SVB Field Test Procedure 9.3 Comparing the Four Practical-Exam Assemblies 9.4 Hands-On Sequence Under Practical Exam Pressure

10 Installation Requirements & Inspection

10.1 Orientation, Clearance, and Elevation Rules 10.2 RP Drainage, Air Gap, and Flood Protection 10.3 Freeze Protection and Thermal Expansion 10.4 Pre-Test Visual Inspection

11 Codes, Standards & Manuals

11.1 ASSE Series 5000 and 5110 Professional Qualifications 11.2 Device Standards 1013, 1015, 1020, 1056 11.3 USC Manual of Cross-Connection Control 10th Edition 11.4 AWWA M14, EPA 816-R-03-002, and SDWA Framework

12 Reporting, Boundaries & Exam Prep

12.1 Field Test Reports and Pass/Fail Language 12.2 Purveyor Notification and Record Retention 12.3 Tester vs Repairer vs Surveyor Boundaries 12.4 Written Exam Strategy, Study Plan, and Next Credentials

11.4 AWWA M14, EPA 816-R-03-002, and SDWA Framework

Key Takeaways Explain This Topic AI

AWWA M14 is Recommended Practice for Backflow Prevention and Cross-Connection Control—program-level guidance for water utilities, not a personal tester certificate

EPA Cross-Connection Control Manual EPA 816-R-03-002 is federal technical guidance supporting cross-connection control practice and program design

The Safe Drinking Water Act (SDWA) framework obligates public water systems to deliver safe water; cross-connection control is part of that public-health mission

Day-to-day tester requirements are controlled by local AHJ and water purveyor rules built on the federal/state foundation

Hierarchy to memorize: federal framework → state rules → local purveyor/AHJ → manufacturer listing and installation instructions—do not invent local code section numbers on the exam

Last updated: August 2026

11.4 AWWA M14, EPA 816-R-03-002, and SDWA Framework

Quick Answer: AWWA M14 is the American Water Works Association’s Recommended Practice for Backflow Prevention and Cross-Connection Control —utility program guidance. EPA 816-R-03-002 is the EPA Cross-Connection Control Manual , federal technical guidance. The Safe Drinking Water Act (SDWA) is the federal legal framework for public water systems. Your day-to-day orders come from the local purveyor and AHJ , sitting on state rules that implement the federal mission. Learn the hierarchy ; do not invent local code numbers.

The regulatory stack in one picture

Think of nested authority, not competing random books:

Layer What it is What it means for a 5110 tester

Federal statute Safe Drinking Water Act (SDWA) Public water systems must protect potable water; CCC programs exist inside that mission

Federal guidance EPA manuals such as EPA 816-R-03-002 Technical guidance on cross-connection hazards, protection, and program elements

Industry recommended practice AWWA M14 How utilities design and run backflow/CCC programs

State rules State health/environmental drinking-water regulations Often require or authorize CCC programs and credential acceptance

Local purveyor / AHJ Utility ordinance, rules, approved lists, forms Controls day-to-day testing frequency, report format, assembly approval

Product listing & manufacturer ASSE 10xx listings, installation instructions Hardware must be listed and installed correctly

  • Personnel standard ASSE Series 5000 / 5110 You must be qualified
  • Field procedure USC 10th (or other recognized method) You must test correctly

If two layers seem to conflict in the field, follow the more specific enforceable local rule that applies to that service connection—and escalate questions to the purveyor. On the written exam , choose answers that respect this hierarchy rather than inventing a city code section.

SDWA framework (what the exam actually needs)

The Safe Drinking Water Act is federal law establishing the framework under which EPA and states regulate public water systems . You are not studying SDWA like an environmental lawyer. You need the public-health logic :

People expect water from the tap to be safe .

Distribution systems can be contaminated by backflow through cross-connections if unprotected.

Therefore water systems implement cross-connection control programs —surveys, required assemblies, testing, enforcement.

Testers are the field measurement layer that tells the utility whether installed assemblies still work.

SDWA does not hand you a hose order for an RP. It explains why your job exists at the top of the legal pyramid.

EPA 816-R-03-002 Cross-Connection Control Manual

EPA 816-R-03-002 is the EPA Cross-Connection Control Manual —a federal technical guidance document (document number is a frequent recognition item). Roles of this manual family include:

Explaining backsiphonage and backpressure mechanisms in plain regulatory language.

Illustrating common cross-connections and recommended protection methods .

Supporting program elements utilities and states use when building CCC rules.

Providing a shared federal vocabulary that later industry manuals and training courses still echo.

  • What EPA 816-R-03-002 is What it is not
  • Federal guidance on cross-connection control Your ASSE 5110 certificate
  • Support for why programs exist and how hazards are categorized A substitute for local approved-assembly lists
  • A document number worth recognizing on exams A demand that you memorize every illustration page

If a stem asks which federal manual is commonly cited for cross-connection control guidance, EPA 816-R-03-002 is the match—not AWWA M14 (industry association) and not Series 5000 (personnel qualifications).

AWWA M14 Recommended Practice

AWWA is the American Water Works Association . M14 is the manual titled in essence Recommended Practice for Backflow Prevention and Cross-Connection Control . It speaks primarily to water utilities and program administrators , covering topics such as:

Building a written CCC program .

Hazard assessment and selection of containment vs isolation strategies at a program level.

Assembly selection guidance aligned with industry practice.

Testing , maintenance, and recordkeeping expectations from the utility’s point of view.

Coordination among operations, engineering, and customer service .

For a 5110 candidate, M14 is context : it explains the world your reports feed into. A program administrator (ASSE 5150 territory) lives in M14 more deeply than a pure field tester, but written items may ask whether M14 is a recommended practice for utilities versus a personnel certification standard . Answer: recommended practice / program guidance , not 5110 itself.

Tester’s place in the stack (operational reality)

On a typical service call you are not “enforcing SDWA.” You are:

Authorized (or accepted) by the local purveyor as a qualified tester.

Testing an assembly on a customer premises or service under that utility’s rules.

Using a calibrated gauge and a recognized procedure .

Filing a report on the form and timeline the utility requires.

Flagging fails so the assembly is repaired by a qualified repairer and retested before the utility relies on it again.

  • Who sets the rule Example of what they control
  • Federal / state That public systems must protect water; that programs must exist in some form
  • Purveyor / AHJ Annual test due dates, which credentials are accepted, report portals, fees, shutoff authority
  • ASSE 5110 program Your competence standard and certification status
  • USC 10th (or peer method) How you obtain pass/fail numbers
  • Manufacturer Installation orientation, parts, temperature limits

When a customer argues “federal law says I don’t need a test this year,” you do not debate SDWA case law on the lawn. You follow the purveyor’s written requirement for that service and point the customer to the utility. When an exam stem tries to make you quote a fictional “City Code §14.7.3(b),” refuse the bait—choose the hierarchy answer .

Do not invent local code numbers

This is a hard study rule for ExamFinch and for real exams:

Teach roles of documents, not fake section citations.

Use phrases like “ local purveyor ordinance ,” “ AHJ rules ,” “ state drinking-water regulations .”

If two jurisdictions differ on test frequency or accepted credentials, that is expected— local rules control day-to-day .

Good exam language Bad exam language

“Follow the water purveyor’s cross-connection rules and approved list” “Per Municipal Code 9.4.12 every RP is due every 11 months nationwide”

“SDWA framework drives public water system duties” “SDWA section X requires USC 10th exclusively in all states”

  • “AWWA M14 guides utility program design” “AWWA M14 is the ASSE tester certification exam”
  • How M14 / EPA / SDWA connect to ASSE 5110
  • Question Best pointer
  • Why must public systems care about backflow? SDWA public-health framework
  • Where do utilities find program design practice? AWWA M14
  • Which federal manual number is a CCC guidance classic? EPA 816-R-03-002
  • Who may perform the field test? ASSE 5110 (or locally accepted equivalent)
  • How is the test performed? Recognized procedure (e.g., USC 10th )
  • Which RP product is listed? ASSE 1013
  • What form do I file Friday? Local purveyor requirements

That grid is the entire “codes, standards, and manuals” domain in operational form. Memorize document jobs , not encyclopedic quotations.

Scenario drill (hierarchy in action)

Scenario: A hospital RP fails USC-style check #1. The facility manager wants you to “pencil pass” because “EPA allows discretion.”

Correct path: Record the fail against the procedure criteria; notify per purveyor rules ; do not invent EPA discretion to override measured failure. EPA guidance supports programs; it does not authorize false passes. Repair (5130-qualified person as applicable) and retest .

Scenario: A rural district accepts ASSE 5110 but requires electronic submission within 5 business days.

Correct path: Your national credential gets you in the door ; the district’s administrative rule controls the submission clock . Missing the portal deadline can invalidate an otherwise perfect field test for compliance purposes.

Scenario: A written item asks which document is AWWA’s recommended practice for utility backflow programs.

Correct path: M14 —not Series 5000, not 1013, not SDWA text alone.

Closing map for Chapter 11

  • Section Shelf
  • 11.1 Series 5000 / 5110 People qualifications
  • 11.2 Device 10xx standards Hardware performance listings
  • 11.3 USC 10th How to field-test and which numbers pass
  • 11.4 M14 / EPA / SDWA Why programs exist and who sets local day-to-day rules

Carry that four-shelf map into the written exam. When a stem names a document, ask: people, product, procedure, or program/law? The correct answer almost always falls cleanly into one shelf—and the distractors come from the other three.