Study guide

13.2 Removable Partial Denture Design, Surveying, Clasping & RPI System

Australian Dental Council ADC

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Examination Overview

1.1 ADC Written Examination Structure, Scoring Clusters & Australian Practice Context 1.2 Clinical Scenario Reasoning & Australian Therapeutic Guidelines Alignment

2 Chapter 2: Restorative Dentistry & Fixed Prosthodontics

2.1 Minimal Intervention Dentistry, Caries Risk & Lesion Management 2.2 Direct Restorative Materials, Resin Composites & Dental Amalgam 2.3 Indirect Restorations, Crown Preparation, Veneers & Onlays 2.4 Dental Adhesion, Etch-and-Rinse vs Self-Etch Systems & Hybrid Layer 2.5 Diagnosis & Management of Tooth Wear (Erosion, Attrition, Abrasion, Abfraction)

3 Chapter 3: Dental Pharmacology & Therapeutic Guidelines

3.1 Local Anaesthetic Agents, Vasoconstrictors & Injection Techniques 3.2 Dental Analgesia Protocols, NSAIDs, Paracetamol & Opioid Stewardship 3.3 Dental Antibiotic Prescribing, Prophylaxis & Therapeutic Guidelines 3.4 Management of Patients on Anticoagulants & Antiplatelet Therapy 3.5 Medication-Related Osteonecrosis of the Jaw (MRONJ) Risk & Management

4 Chapter 4: General Medicine & Medically Compromised Patients

4.1 Dental Office Medical Emergencies, Anaphylaxis & Resuscitation Protocols 4.2 Management of Patients with Cardiovascular, Respiratory & Renal Diseases 4.3 Special Needs Dentistry, Geriatric Care & Dental Management in Pregnancy 4.4 Infective Endocarditis Prophylaxis & Cardiac Risk Assessment

5 Chapter 5: Oral Medicine & Oral Pathology

5.1 Ulcerative, Vesiculobullous & Immune-Mediated Oral Mucosal Diseases 5.2 Oral Potentially Malignant Disorders (OPMDs) & Oral Cancer Screening 5.3 Salivary Gland Disorders, Sialadenitis & Cysts of the Jaws 5.4 Oral Biopsy Indications, Diagnostic Pathways & Specialist Referral

6 Chapter 6: Endodontics

6.1 Pulpal and Periapical Diagnostic Classification & Diagnostic Testing 6.2 Canal Instrumentation, Working Length & Irrigation Protocols 6.3 Root Canal Obturation, Endodontic Retreatment & Failure Analysis 6.4 Endodontic Management of Traumatic Dental Injuries & Vital Pulp Therapy

7 Chapter 7: Oral Surgery

7.1 Surgical & Simple Exodontia Techniques & Intraoperative Complications 7.2 Assessment & Surgical Management of Impacted Third Molars 7.3 Oroantral Communication, Displacement & Trigeminal Nerve Injury Prevention 7.4 Management of Spreading Odontogenic Infections & Fascial Space Abscesses

8 Chapter 8: Paediatric Dentistry & Orthodontics

8.1 Primary Tooth Pulpotomy, Pulpectomy & Stainless Steel Crown Restoration 8.2 Early Childhood Caries, Space Maintenance & Traumatic Primary Dentition 8.3 Malocclusion Classification, Etiology & Interceptive Orthodontic Management 8.4 Non-Pharmacological Behaviour Guidance, Child Protection & Consent

9 Chapter 9: Periodontics

9.1 2018 Periodontal Staging, Grading & Risk Factor Assessment 9.2 Subgingival Debridement, Plaque Control & Antimicrobial Adjuncts 9.3 Periodontal Surgical Flaps, Regenerative Therapy & Furcation Management 9.4 Supportive Periodontal Care, Maintenance Protocols & Risk Re-evaluation

10 Chapter 10: Preventive Dentistry

10.1 Caries Risk Assessment Models (CAMBRA) & Personalised Prevention 10.2 Fluoride Mechanisms, Topical Applications & Community Fluoridation 10.3 Dietary Counselling, Stephan Curve Dynamics & Erosion Prevention 10.4 Pit and Fissure Sealants, Casein Phosphopeptide-Amorphous Calcium Phosphate (CPP-ACP)

11 Chapter 11: Dental Emergencies

11.1 Emergency Management of Severe Odontogenic Pain & Acute Irreversible Pulpitis 11.2 Acute Management of Avulsed, Luxated & Fractured Permanent Teeth 11.3 Diagnosis, Differentiation & Treatment of Cracked Tooth Syndrome 11.4 Emergency Management of Post-Extraction Hemorrhage & Acute Abscesses

12 Chapter 12: Pain & Behaviour Management

12.1 Assessment & Management of Dental Anxiety, Phobia & Dental Fear 12.2 Nitrous Oxide Inhalation Sedation & Intravenous Sedation Guidelines 12.3 Diagnosis & Management of Temporomandibular Disorders & Chronic Facial Pain 12.4 Informed Consent, Patient Autonomy, Ethics & Professional Boundaries

13 Chapter 13: Removable Prosthodontics

13.1 Complete Denture Design, Impression Techniques & Maxillomandibular Relations 13.2 Removable Partial Denture Design, Surveying, Clasping & RPI System 13.3 Post-Insertion Problems, Sore Spots, Relining & Rebase Procedures 13.4 Denture Stomatitis, Tissue Conditioning & Pre-Prosthetic Surgery

14 Chapter 14: Dental Radiography & Imaging

14.1 Radiation Physics, ALARA Principles, Shielding & Dose Reduction 14.2 Intraoral Radiographic Techniques, Positioning & Geometry 14.3 Radiographic Interpretation, Normal Anatomical Landmarks & Artifacts

15 Chapter 15: Infection Prevention & Control

15.1 Standard & Transmission-Based Precautions in Dental Practice 15.2 Instrument Reprocessing, Autoclaving & Sterilisation Monitoring 15.3 Dental Unit Waterlines, Waste Management & Occupational Exposure Protocols

16 Chapter 16: Dental Implants & Peri-Implant Diseases

16.1 Patient Selection, Bone Density, Anatomic Constraints & Prosthetic Planning 16.2 Peri-Implant Anatomy, Hygiene Protocols & Maintenance Monitoring 16.3 Diagnosis, Risk Factors & Management of Peri-Implant Diseases

13.2 Removable Partial Denture Design, Surveying, Clasping & RPI System

Key Takeaways Explain This Topic AI

Kennedy Class I and II represent distal extension edentulous arches where support is shared between abutment teeth (periodontal ligament) and residual ridge mucosa (viscoelastic tissue).

Surveying identifies the height of contour, evaluates undercut depths (typically 0.25 mm for cobalt-chromium clasps), and determines parallel guiding planes along proximal tooth surfaces.

Major connectors must provide rigidity; mandibular lingual bars require a minimum of 7 to 8 mm vertical distance from the floor of the mouth to the free gingival margin.

The RPI system utilizes a mesial occlusal rest, a distal proximal plate, and a gingivally approaching I-bar clasp to minimize destructive tipping forces on distal extension abutments.

Reciprocation requires the reciprocal arm to contact the tooth above the height of contour before the retentive tip flexes over the survey line during insertion.

Last updated: August 2026

13.2 Removable Partial Denture Design, Surveying, Clasping & RPI System

Removable Partial Dentures (RPDs) restore masticatory function, aesthetics, and arch stability while safeguarding remaining teeth and oral tissues. For the ADC Written Examination , candidates must demonstrate precise knowledge of Kennedy classification, Applegate's governing rules, surveyor mechanics, major connector selection, direct retainer physics, and the biomechanics of distal extension design (specifically the RPI system).

1. Kennedy Classification & Applegate's Governing Rules

The Kennedy system categorizes partially edentulous arches based on the location of edentulous spaces relative to remaining teeth.

The Four Kennedy Classes

Class I: Bilateral edentulous areas located posterior to the remaining natural teeth (distal extension).

Class II: Unilateral edentulous area located posterior to the remaining natural teeth (distal extension).

Class III: Unilateral edentulous area with natural teeth remaining both anterior and posterior to it (tooth-borne bounded span).

Class IV: A single, bilateral edentulous area located anterior to the remaining natural teeth, crossing the dental midline.

Applegate's 8 Rules for Classification

Classification should follow, rather than precede, extractions that might alter the final design.

If a third molar is missing and not to be replaced, it is not considered in the classification.

If a third molar is present and is to be used as an abutment, it is considered in the classification.

If a second molar is missing and is not to be replaced, it is not considered in the classification.

The most posterior edentulous area(s) always determines the classification.

Edentulous areas other than those determining the classification are referred to as modification spaces and are designated by their number.

The extent of the modification space is not considered—only the number of additional edentulous areas.

There can be no modification spaces in Class IV arches. Any edentulous area lying posterior to the single bilateral anterior space changes the classification to Class I, II, or III.

2. Component Parts & Biomechanical Functions

An RPD consists of major connectors, minor connectors, direct retainers (clasps), indirect retainers, rests, and denture bases.

Major Connectors: Mandibular & Maxillary Selection

Major connectors unite components from one side of the dental arch to the other, providing cross-arch stability and rigidity.

Mandibular Major Connectors:

Lingual Bar: Standard choice. Requires a minimum of 7 to 8 mm vertical clearance between the floor of the mouth and the free gingival margin (bar height 4–5 mm, plus 3–4 mm gingival margin clearance).

Lingual Plate: Indicated when vertical clearance is < 7 mm <7\text{ mm} < 7 mm , high floor of mouth, presence of mandibular tori, or when remaining anterior teeth are periodontally compromised and require future tooth additions.

Maxillary Major Connectors:

Palatal Strap: Single wide band; ideal for short tooth-borne bounded spans (Class III).

Broad Palatal Plate: Covers maximum palatal vault; indicated for Class I arches with severe residual ridge resorption.

Anteroposterior (AP) Palatal Strap: Rigid structural box design; indicated when a palatal torus is present or in long-span Class I/II arches.

Horseshoe (U-shaped): Least rigid maxillary connector; prone to flexing under load. Indicated only when a large, inoperable palatal torus extends to the posterior border.

3. Direct Retainers, Rest Seats & Reciprocation

Direct retainers provide resistance to dislodgement along the path of insertion.

Direct Retainer Types

Suprabulge Clasps (Occlusally Approaching):

Cast Circumferential (Akers) Clasp: Standard clasp for tooth-borne RPDs; engages 0.25 mm (0.01 inch) undercut in the gingival third opposite the origin.

Ring Clasp: Wraps almost 360 ∘ 360^\circ 36 0 ∘ around an isolated, tilted molar abutment.

Embrasure (Double Akers) Clasp: Used on adjacent teeth in bounded spans without edentulous spaces on that side.

Infrabulge Clasps (Gingivally Approaching / Bar Clasps):

I-Bar, T-Bar, Y-Bar: Approaches the undercut from the mucosal direction. Requires 3 mm clearance from gingival margin. Contraindicated in deep mucosal undercuts or tissue impingement.

Rest Seat Preparation & Support

Rests transfer vertical occlusal forces down the long axis of abutment teeth.

Occlusal Rest: Spoon-shaped, rounded triangular outline; marginal ridge lowered by 1.5 mm; floor slopes toward center of tooth ( < 90 ∘ <90^\circ < 9 0 ∘ angle between rest and minor connector).

Cingulum Rest: Inverted 'V' or shelf preparation on maxillary canines; avoids occlusal interference.

Principle of Reciprocation

During insertion and removal, as the retentive arm flexes over the height of contour, it exerts lateral forces on the abutment tooth. To prevent tooth movement, a rigid reciprocal arm located above the height of contour must contact the tooth before the retentive arm flexes over the survey line.

4. Model Surveying & The RPI System

Surveying analyzes the master cast to establish the path of insertion, heights of contour, and undercuts.

Objectives of Surveying

Identify parallel Guiding Planes along proximal tooth surfaces to direct insertion and removal.

Locate heights of contour and measure retentive undercuts ( 0.25 mm for cast cobalt-chromium; 0.50 mm for wrought wire).

Identify soft tissue or bony interferences (tori, tipped teeth).

Record spatial orientation of the cast via Tripoding .

The RPI System for Distal Extension (Kennedy Class I & II)

Distal extension bases rely on dual support: rigid periodontal ligament of abutment teeth (moves ∼ 0.1 mm \sim 0.1\text{ mm} ∼ 0.1 mm ) and viscoelastic mucosal tissue (displaces 1.0 – 3.0 mm 1.0\text{--}3.0\text{ mm} 1.0 – 3.0 mm ). Under occlusal load, the denture base depresses into the mucosa, creating a lever arm that can torque abutment teeth.

The RPI System overcomes destructive lever forces through three specific components:

R = Rest: Placed on the mesio-occlusal surface of the primary abutment tooth (rather than distal occlusal), moving the fulcrum point anteriorly.

P = Proximal Plate: Positioned on the distal surface of the abutment, contacting the lower 1/3 of the guiding plane. Relief is placed below the guiding plane contact.

I = I-Bar Clasp: Located at or anterior to the greatest prominence on the buccal surface, engaging a 0.25 mm undercut in the gingival third.

Biomechanical Action Under Load

When occlusal force depresses the distal extension base:

The denture rotates around the mesial rest fulcrum.

The proximal plate moves inferiorly and anteriorly into the distal gingival trough, disengaging from the tooth surface.

The I-bar clasp moves anteriorly and inferiorly into the mesial undercut area, disengaging from the tooth.

Result: Abutment tooth receives non-destructive vertical forces rather than harmful distal tipping torque (prevents Class I lever action).

Loading diagram... RPI System Biomechanical Movement Under Occlusal Loading