Study guide
3.3 Basic Fatigue Management (BFM) and Advanced Fatigue Management (AFM)
NSW Heavy Vehicle Knowledge Test Exam
Track your progress as you read
Finished sections get a check mark.
1 NSW Heavy Vehicle Licensing, Qualifications & Pathways
1.1 Heavy Vehicle Licence Classes and Progression Pathways 1.2 Transmission Restrictions, Assessments, and Driver Qualifications 1.3 HVKT Test Structure, Delivery, and Exam Day Logistics
2 Driver Health, Alcohol and Drugs, and Roadside Testing
2.1 Alcohol Limits, Breath Testing and Drink-Driving Sanctions 2.2 Roadside Drug Testing and Prescribed Medications 2.3 Driver Health, Medical Conditions, and Commercial Fitness Standards
3 Fatigue Management, Heavy Vehicle National Law, and Work Diaries
3.1 Fatigue Science, Warning Signs, and Risk Factors 3.2 Standard Hours Work and Rest Limits 3.3 Basic Fatigue Management (BFM) and Advanced Fatigue Management (AFM) 3.4 National Driver Work Diary Rules and Record-Keeping
4 Low-Risk Driving, Spatial Management, and Maneuvering
4.1 Crash Avoidance Space, Scanning, and Following Distances 4.2 Speed Management, Braking Distances, and Rollover Prevention 4.3 Off-Tracking, Turning Sweeps, and Safe Reversing
5 NSW Heavy Vehicle Road Rules, Signs, and Infrastructure
5.1 "Do Not Overtake Turning Vehicle" Rules and Multi-Lane Turns 5.2 Heavy Vehicle Road Signs, Lane Restrictions, and Low Gear Descents 5.3 Level Crossings, Portable Warning Triangles, and Heavy Vehicle Parking
6 Vehicle Roadworthiness, Inspections, and Braking Systems
6.1 Pre-Departure Daily Safety Inspections 6.2 Air Brake Systems, Pressures, and Low-Air Warnings 6.3 Brake Fade, Auxiliary Retarders, and Non-Synchromesh Transmissions 6.4 Heavy Vehicle Defect Notices and Compliance Inspections
7 Vehicle Mass, Dimension Limits, and General vs Restricted Access
7.1 Statutory Mass Limits and Axle Weight Distribution 7.2 Statutory Dimension Limits and Overhang Regulations 7.3 Restricted Access Vehicles (RAVs), PBS, and Oversize/Overmass Permits
8 Combination Vehicles, Coupling, and Load Restraint
8.1 Coupling and Uncoupling Procedures for Combination Vehicles 8.2 Combination Vehicle Dynamics, Air Lines, and Roll-Away Prevention 8.3 National Load Restraint Guide Standards and Restraint Methods
9 NSW Road Rules: Signs, Signals and Lane Discipline
9.1 Traffic Signs: Regulatory, Warning and Heavy-Vehicle Signs 9.2 Traffic Lights, Arrows and Lane Discipline 9.3 Intersections, Give Way, Stop Signs and Roundabouts
10 Sharing the Road with Vulnerable Road Users
10.1 Pedestrians, Children, School and Rail Crossings 10.2 Bicycle Riders, Motorcyclists, Horses and Sharing the Road 10.3 Seat Belts, Restraints and Getting In and Out Safely
11 Offences, Enforcement and Test Integrity
11.1 Negligent and Dangerous Driving, Overtaking and Road Works 11.2 Speed Limits, Speed Limiters and Speeding Penalties 11.3 Vehicle Monitors, Noise, Emissions and Test Integrity
3.3 Basic Fatigue Management (BFM) and Advanced Fatigue Management (AFM)
Key Takeaways Explain This Topic AI
Basic Fatigue Management (BFM) lets an accredited operator's inducted drivers work up to 14 hours in any 24-hour period, compared with 12 hours under Standard Hours, but it does not shorten the sleep block: a solo BFM driver must still take 7 continuous hours of stationary rest in that 24 hours.
The BFM 36-hour rule caps 'long/night' hours at 36 in any 7-day period, where long/night means work beyond 12 hours in a 24-hour period plus any work between midnight and 6 am.
In any 14 days a BFM driver may work up to 144 hours and must take 2 blocks of 24 continuous hours of stationary rest, the first after no more than 84 hours of work, plus 4 nights off including 2 consecutive.
Advanced Fatigue Management (AFM) replaces prescriptive hours with an operator-specific risk-assessed system, but it cannot exceed the published outer limits of 15½ hours work in 24 hours, 154 hours in 14 days and 288 hours in 28 days.
A driver cannot elect to work BFM or AFM hours personally; the operator must hold the accreditation and the driver must be inducted into its fatigue management system. Since 1 August 2026, no new BFM or AFM accreditations are granted: existing ones run until they expire, and new operators apply for ACA–Fatigue (Alternative Compliance Hours) under the Heavy Vehicle Accreditation scheme.
Last updated: October 2026
3.3 Basic Fatigue Management (BFM) and Advanced Fatigue Management (AFM)
The National Heavy Vehicle Accreditation Scheme (NHVAS) provides heavy vehicle transport operators with regulatory flexibility in exchange for adopting robust, auditable safety and fatigue management systems. Operating under Basic Fatigue Management (BFM) or Advanced Fatigue Management (AFM) allows drivers to operate extended hours beyond Standard Hours while maintaining stringent risk controls and medical oversight.
Changes from 1 August 2026: BFM and AFM are no longer available to new applicants. Operators with an existing BFM or AFM accreditation can keep operating under it until it expires, is cancelled, or they transition to the Heavy Vehicle Accreditation (HVA) scheme. New applicants who want work and rest hours other than Standard Hours apply for Alternative Compliance Accreditation – Fatigue (ACA–Fatigue) , which provides Alternative Compliance Hours (ACH) stated on the operator's certificate. The BFM and AFM limits below still apply to drivers working under an existing accreditation.
The NHVAS Fatigue Management Modules
The NHVAS is administered by the National Heavy Vehicle Regulator (NHVR) and includes three core accreditation modules: Mass Management, Maintenance Management, and Fatigue Management. +-----------------------------------------------------------------------------------+
- | NHVAS FATIGUE MANAGEMENT PATHWAY |
- +-----------------------------------------------------------------------------------+
- | 1. STANDARD HOURS | Baseline prescriptive rules (12h work max in 24h). |
- | 2. BASIC FATIGUE (BFM) | Accredited flexibility up to 14h work in 24h, capped by |
- | | 36 long/night hours in any 7 days. |
- | | Requires driver training, medicals, operator FMS. |
- | 3. ADVANCED FATIGUE (AFM)| Bespoke, risk-assessed, non-prescriptive safety system. |
- | | Approved by NHVR based on scientific fatigue modeling. |
- +-----------------------------------------------------------------------------------+
- Basic Fatigue Management (BFM) Solo Driver Limits
BFM offers transport operators increased productivity by allowing longer daily working shifts, balanced by mandatory additional rest periods and strict multi-day caps.
1. Daily (24-Hour) Limits under BFM Solo
Maximum Work Time: Up to 14 hours of work time in any 24-hour period (compared to 12 hours under Standard Hours).
Minimum Rest Time: In any 24-hour period a solo BFM driver must take at least 7 continuous hours of stationary rest — the same continuous block as Standard Hours. BFM buys extra work hours, not a shorter sleep.
Shorter interval limits are also relaxed: 6 hours work in any 6 hours 15 minutes (15 continuous minutes rest); 8 hours 30 minutes work in any 9 hours (30 minutes rest in 15-minute blocks); 11 hours work in any 12 hours (60 minutes rest in 15-minute blocks).
2. Multi-Day Cumulative Limits under BFM Solo
The 36-hour long/night rule — in any 7-day (168-hour) period: A BFM driver may work no more than 36 "long/night" hours in any 7 days . Long/night hours means any work time in excess of 12 hours in a 24-hour period , plus any work time between midnight and 6 am . This is the rule that stops an operator rostering 14-hour night shifts back to back, and it is the single most misquoted BFM number — it is a 7-day cap on a specific kind of hour, not a 72-hour cap on all work.
In any 14-day (336-hour) period: Maximum 144 hours of work time . The driver must take 2 blocks of 24 continuous hours of stationary rest , and the first of those 24-hour rest blocks must be taken after no more than 84 hours of work . The driver must also have 4 nights off, including 2 consecutive nights .
Standard Hours vs Basic Fatigue Management (BFM) Comparison
The following table outlines the key legal and operational differences between Standard Hours and BFM for solo drivers:
- Operating Parameter Standard Hours Solo Basic Fatigue Management (BFM) Solo
- Maximum Work in 24 Hours 12 hours 14 hours
- Long/night hours in 7 days Not applicable Maximum 36 long/night hours
- Maximum Work in 7 Days 72 hours Governed by the 36 long/night hour rule
- Maximum Work in 14 Days 144 hours 144 hours
- Minimum Rest in 24 Hours 7 continuous hours stationary rest 7 continuous hours stationary rest
14-day rest 4 night rests, 2 consecutive 2 x 24 continuous hours stationary rest (first after no more than 84 hours work) plus 4 nights off, 2 consecutive
Split Rest Availability Not permitted for solo drivers Permitted (e.g. 6h + 2h stationary rest blocks)
Short Rest Breaks 15 min in any 5½h (max 5¼h work); 30 min in any 8h (max 7½h); 60 min in any 11h (max 10h) 15 min in any 6¼h (max 6h work); 30 min in any 9h (max 8½h); 60 min in any 12h (max 11h)
Night Rest Breaks Counted in the 14-day rule (7 continuous hours between 10pm and 8am, or a 24-hour rest) Counted in the 14-day rule (same definition)
- Driver Qualification Heavy vehicle driver licence Mandatory Statement of Attainment ( TLIF0005 / TLIF2010 )
- Medical Certification Standard licensing medical Commercial Medical Standards (every 3 yrs <50; annually 50+)
- Operator Requirement General compliance Accredited Fatigue Management System (FMS) & audit
- Mandatory Prerequisites for BFM Drivers and Operators
A driver cannot simply choose to drive under BFM hours on their own initiative. To legally operate under BFM: +-----------------------------------------------------------------------------------+
- | THREE MANDATORY PILLARS OF BFM |
- +-----------------------------------------------------------------------------------+
- | 1. OPERATOR ACCREDITATION | Carrier must hold valid NHVAS BFM accreditation. |
- | 2. DRIVER INDUCTION & FMS | Driver must be inducted into operator's safety system.|
- | 3. QUALIFICATION & MEDICAL| Nationally recognized competency + current medical. |
- +-----------------------------------------------------------------------------------+
- 1. Driver Competency and Training
The driver must complete the nationally recognized competency unit TLIF0005 ( Apply a fatigue risk management system ) or its predecessor TLIF2010 . The driver must carry evidence of this qualification (Statement of Attainment or driver accreditation card) when operating under BFM.
2. Commercial Medical Examination Standards
Drivers operating under BFM must undergo comprehensive medical examinations assessed against the national Assessing Fitness to Drive commercial standards (assessing cardiovascular health, sleep apnea, vision, diabetes, and neurological function):
Drivers aged under 50 years: Must undergo a medical examination at least every 3 years .
Drivers aged 50 years and over: Must undergo an annual medical examination every 12 months .
3. Operator Fatigue Management System (FMS)
The transport operator must maintain documented policies covering driver scheduling, rostering, health assessments, fatigue reporting, trip planning, and internal compliance audits.
Advanced Fatigue Management (AFM)
Advanced Fatigue Management (AFM) is the most sophisticated tier of fatigue accreditation under the HVNL. Unlike Standard Hours and BFM, which are prescriptive ("one size fits all"), AFM is a risk-based, customized fatigue management system .
Core Characteristics of AFM:
Tailored Schedules: Operators design specialized work and rest schedules suited to specific freight tasks (such as long-haul livestock transport, remote mining haulage, or seasonal agricultural harvesting).
Biomathematical Fatigue Modeling: AFM proposals are scientifically evaluated using validated fatigue modeling software (such as FAID or FAST) to assess predicted driver alertness scores.
Safety Countermeasures: AFM operators implement enhanced safety controls, such as driver in-cab fatigue monitoring cameras (eye-tracking technology), telematics, mandatory minimum rest before shifts, and strict health management programs.
NHVR Approval: Every AFM safety case was individually reviewed, risk-assessed, and approved by the NHVR before operations began. New AFM applications are no longer accepted since 1 August 2026; existing AFM accreditations continue until they expire, and new operators use ACA–Fatigue instead.
Chain of Responsibility (CoR) Obligations
Under Section 26C of the Heavy Vehicle National Law , every party in the supply chain has a positive, non-delegable legal duty—known as the Primary Safety Duty —to ensure the safety of transport activities. +-----------------------------------------------------------------------------------+
- | CHAIN OF RESPONSIBILITY (CoR) FATIGUE OBLIGATIONS |
- +-----------------------------------------------------------------------------------+
- | CONSIGNOR / CONSIGNEE | Must not set delivery times that force speeding/fatigue. |
- | SCHEDULER | Must build realistic timetables including mandatory rest. |
- | OPERATOR / CARRIER | Must roster drivers within legal hours & manage fatigue. |
- | LOADING MANAGER | Must ensure loading bays avoid unreasonable driver delays.|
- | DRIVER | Must manage off-duty rest and refuse to drive fatigued. |
- +-----------------------------------------------------------------------------------+
- Prohibited Commercial Practices under CoR
The law explicitly prohibits commercial practices that encourage or cause fatigue breaches:
Unrealistic Delivery Schedules: Schedulers must not set transit times that can only be achieved by exceeding speed limits or skipping mandatory rest breaks.
Loading Slot Demands and Delays: Consignors and loading managers who keep a driver waiting for 6 hours at a distribution centre cannot demand that the driver immediately undertake a 10-hour drive without resetting their fatigue clock.
Financial Penalties and Incentives: Contracts containing penalty clauses for late delivery that incentivize drivers to drive while fatigued or exceed work limits are illegal.
Real-World Case Study: BFM Linehaul Scheduling
An interstate refrigerated freight operator holds NHVAS BFM accreditation. A solo BFM-qualified driver (aged 46, possessing a current 3-year medical and TLIF0005 certificate) is scheduled for a Melbourne to Sydney run:
Shift Plan: The scheduler rosters the driver for 13 hours 30 minutes of work time across a 24-hour window, incorporating loading in Melbourne, driving the Hume Highway, and unloading in Sydney. That is legal under BFM (14-hour cap) but illegal under Standard Hours (12-hour cap).
Rest Architecture: The driver still has to find 7 continuous hours of stationary rest inside that 24-hour window. BFM raised the work ceiling; it did not shorten the sleep block.
Long/night accounting: The shift produces 1 hour 30 minutes of "long" hours (the work beyond 12 hours in the 24-hour period). If the driver also worked from 02:00 to 05:00, that adds 3 hours of "night" hours . Both counts feed the 36 long/night hours in any 7 days ceiling, so the scheduler must track the running total across the week, not just the day.
If the driver was operating under Standard Hours, this 13.5-hour schedule would constitute a severe illegal breach. Under BFM, it is fully compliant because the operator, scheduler, and driver met all accreditation, training, medical, and rest prerequisites.
Common HVKT Exam Traps
Exam Trap 1: Assuming BFM lets a driver work 14 hours every day indefinitely. Reality: The 36 long/night hours in any 7 days rule limits how often you can push past 12 hours or work between midnight and 6 am. The 14-hour day is available, but not seven days a week.
Exam Trap 2: Quoting "36 hours in 72 hours". Reality: the rule is 36 long/night hours in 7 days . Both the period and the kind of hour being counted are different.
Exam Trap 3: Believing BFM shortens the sleep requirement. Reality: BFM still requires 7 continuous hours of stationary rest in any 24-hour period, exactly as Standard Hours does.
Exam Trap 2: Believing a driver aged 52 only needs a BFM medical every 3 years. Reality: Under BFM rules, drivers aged 50 and over must pass an annual medical examination every 12 months .
Exam Trap 3: Thinking only the truck driver can be fined for fatigue breaches. Reality: Under Chain of Responsibility, schedulers, fleet managers, consignors, and freight forwarders can face severe corporate fines and criminal penalties for causing or contributing to fatigue breaches.
Advanced Fatigue Management: the published outer limits
AFM is described as "non-prescriptive", but that does not mean there are no numbers. An operator's approved AFM system may set any work and rest pattern it can justify, provided it stays inside the outer limits published in the National Regulation . Those outer limits are the hard ceiling no AFM approval can exceed:
- Total period Maximum work time Minimum rest time
- In any 24 hours 15½ hours 7 continuous hours of stationary rest
In any 14 days (336 hours) 154 hours 30 continuous hours of stationary rest that includes midnight to 6 am on one day and midnight to 6 am on the following day, using the time zone of the driver's base
In any 28 days (672 hours) 288 hours Not applicable
Compare those with Standard Hours (12 h / 24 h) and BFM (14 h / 24 h) and the escalation is clear: each scheme buys more daily work time in exchange for a heavier accreditation, training and record-keeping burden. Note that even at the AFM outer limit, the 7 continuous hours of stationary rest in 24 hours never moves .