Study guide
1.3 HVKT Test Structure, Delivery, and Exam Day Logistics
NSW Heavy Vehicle Knowledge Test Exam
Track your progress as you read
Finished sections get a check mark.
1 NSW Heavy Vehicle Licensing, Qualifications & Pathways
1.1 Heavy Vehicle Licence Classes and Progression Pathways 1.2 Transmission Restrictions, Assessments, and Driver Qualifications 1.3 HVKT Test Structure, Delivery, and Exam Day Logistics
2 Driver Health, Alcohol and Drugs, and Roadside Testing
2.1 Alcohol Limits, Breath Testing and Drink-Driving Sanctions 2.2 Roadside Drug Testing and Prescribed Medications 2.3 Driver Health, Medical Conditions, and Commercial Fitness Standards
3 Fatigue Management, Heavy Vehicle National Law, and Work Diaries
3.1 Fatigue Science, Warning Signs, and Risk Factors 3.2 Standard Hours Work and Rest Limits 3.3 Basic Fatigue Management (BFM) and Advanced Fatigue Management (AFM) 3.4 National Driver Work Diary Rules and Record-Keeping
4 Low-Risk Driving, Spatial Management, and Maneuvering
4.1 Crash Avoidance Space, Scanning, and Following Distances 4.2 Speed Management, Braking Distances, and Rollover Prevention 4.3 Off-Tracking, Turning Sweeps, and Safe Reversing
5 NSW Heavy Vehicle Road Rules, Signs, and Infrastructure
5.1 "Do Not Overtake Turning Vehicle" Rules and Multi-Lane Turns 5.2 Heavy Vehicle Road Signs, Lane Restrictions, and Low Gear Descents 5.3 Level Crossings, Portable Warning Triangles, and Heavy Vehicle Parking
6 Vehicle Roadworthiness, Inspections, and Braking Systems
6.1 Pre-Departure Daily Safety Inspections 6.2 Air Brake Systems, Pressures, and Low-Air Warnings 6.3 Brake Fade, Auxiliary Retarders, and Non-Synchromesh Transmissions 6.4 Heavy Vehicle Defect Notices and Compliance Inspections
7 Vehicle Mass, Dimension Limits, and General vs Restricted Access
7.1 Statutory Mass Limits and Axle Weight Distribution 7.2 Statutory Dimension Limits and Overhang Regulations 7.3 Restricted Access Vehicles (RAVs), PBS, and Oversize/Overmass Permits
8 Combination Vehicles, Coupling, and Load Restraint
8.1 Coupling and Uncoupling Procedures for Combination Vehicles 8.2 Combination Vehicle Dynamics, Air Lines, and Roll-Away Prevention 8.3 National Load Restraint Guide Standards and Restraint Methods
9 NSW Road Rules: Signs, Signals and Lane Discipline
9.1 Traffic Signs: Regulatory, Warning and Heavy-Vehicle Signs 9.2 Traffic Lights, Arrows and Lane Discipline 9.3 Intersections, Give Way, Stop Signs and Roundabouts
10 Sharing the Road with Vulnerable Road Users
10.1 Pedestrians, Children, School and Rail Crossings 10.2 Bicycle Riders, Motorcyclists, Horses and Sharing the Road 10.3 Seat Belts, Restraints and Getting In and Out Safely
11 Offences, Enforcement and Test Integrity
11.1 Negligent and Dangerous Driving, Overtaking and Road Works 11.2 Speed Limits, Speed Limiters and Speeding Penalties 11.3 Vehicle Monitors, Noise, Emissions and Test Integrity
1.3 HVKT Test Structure, Delivery, and Exam Day Logistics
Key Takeaways Explain This Topic AI
The NSW Heavy Vehicle Knowledge Test is a computer-based test of 45 questions about road rules and road safety, sat at a Service NSW service centre in two streams: the heavy vehicle rigid test for Light Rigid, Medium Rigid and Heavy Rigid, and the heavy vehicle combination test for Heavy Combination and Multi Combination.
Transport for NSW does not publish a pass mark for the HVKT; widely quoted figures such as 41 out of 45 come from the ACT heavy vehicle test and the NSW car Driver Knowledge Test, not from this test.
The test fee is AUD $58 per attempt and applies to every attempt; depending on availability you may be able to re-sit on the same day, and there is no mandatory waiting period.
A knowledge test pass is valid for 36 months, during which you can collect a HVCBA Learner Log Book or book a Heavy Vehicle Driving Test.
Questions come from three official publications — the Heavy Vehicle Driver Handbook, the Road User Handbook and the Load Restraint Guide — and about three quarters of the published pool is sourced from the Road User Handbook.
Last updated: August 2026
HVKT Test Structure, Delivery, and Exam Day Logistics
Key Focus: The NSW Heavy Vehicle Knowledge Test (HVKT) is a computer-based test of 45 questions administered at Service NSW service centres. You must sit the correct stream — Rigid (LR, MR, HR) or Combination (HC, MC) — and a pass is valid for 36 months . Transport for NSW does not publish a pass mark for this test.
The Heavy Vehicle Knowledge Test (HVKT) represents the mandatory theoretical qualification gateway for all commercial drivers in New South Wales. Administered by Service NSW on behalf of Transport for NSW (TfNSW) , the test verifies that an applicant understands statutory road rules, mass and dimension limits, low-risk driving protocols, load restraint principles, and heavy vehicle mechanical systems before they commence practical training.
HVKT Examination Architecture & Scoring Benchmarks
The HVKT is delivered on computerized touch-screen terminals located within Service NSW service centres. The system draws questions dynamically from an extensive official database.
Key Examination Parameters:
Total Questions: 45 multiple-choice questions about road rules and road safety relating to the heavy vehicle licence class you are applying for.
Passing Score: Transport for NSW does not publish a pass mark for the HVKT. The official test page states only the number of questions. Figures circulated online such as "41 out of 45" come from the ACT heavy vehicle knowledge test and from the NSW car Driver Knowledge Test, which has a different structure. Prepare to answer every question correctly rather than aiming at a threshold.
Delivery Mechanism: Computer-based test at a Service NSW service centre. Tests are available in ten languages, audio versions are available, a free interpreter service can be arranged for other languages, and extra assistance is available for people with reading difficulties.
Time Limit: Transport for NSW does not publish a time limit for the HVKT.
Question Sources: The published question pools are grouped into a General Knowledge section, a Road Safety section and a Traffic Signs section, drawn from the three official handbooks below.
The Two HVKT Examination Streams
TfNSW divides the HVKT into two specialized test streams. Sitting the incorrect stream will prevent Service NSW from issuing your required learner logbook or licence upgrade. [Heavy Vehicle Knowledge Test (HVKT)]
- │
- ├──► [Rigid Test Stream] ────────► Required for Classes: LR, MR, and HR
- │ (Focus: Single-unit trucks, buses, axle weights, rear overhang, passenger safety)
- │
- └──► [Combination Test Stream] ──► Required for Classes: HC and MC
- (Focus: Articulated prime movers, 5th wheels, air brake lines, off-tracking, B-doubles)
- 1. Rigid Test Stream (LR, MR, HR)
Target Candidates: Applicants seeking a Light Rigid (LR), Medium Rigid (MR), or Heavy Rigid (HR) licence.
Core Content Modules: Rigid truck dynamics, single-unit turning circles, rear overhang swing calculations, 2-axle and multi-axle statutory weight limits, bus safety and passenger welfare, hydraulic/air brake operational basics, and low-gear mountain descents.
2. Combination Test Stream (HC, MC)
Target Candidates: Drivers upgrading from an existing rigid licence (MR or HR) to a Heavy Combination (HC) or Multi Combination (MC) licence.
Core Content Modules: Articulated vehicle kinematics, turntable/fifth wheel coupling and uncoupling procedures, kingpin inspection, twin air brake line functionality (red supply/emergency line vs blue/yellow service line), trailer brake breakaway activation, trailer off-tracking and cut-in, jackknife and rollover prevention, and B-double route access rules.
Comparison Table: HVKT Rigid vs Combination Streams
Examination Stream Target Licence Classes Core Mechanical Focus Specialised Road Rule Focus Prerequisites
Rigid Stream LR, MR, HR Air/hydraulic brakes, exhaust retarders, pre-trip inspections Rear overhang limits, bus passenger rules, rigid axle weight caps Class C held ≥ 1 yr (LR/MR) or ≥ 2 yrs (HR)
Combination Stream HC, MC Fifth wheel turntables, kingpins, red/blue air lines, spring brakes Trailer off-tracking, jackknife dynamics, roll-away prevention, B-double routes Class MR or HR held ≥ 12 months
Booking Logistics, Examination Fees, and Retake Rules
Booking Procedures:
Online: Through the official Service NSW portal (service.nsw.gov.au).
In-Person / Phone: Bookable directly at any Service NSW service centre, or by phone.
Required Identification: Primary ID (current NSW driver licence) and proof of eligibility.
Examination Fees & Validity:
Test Fee: AUD $58 per attempt on the current Transport for NSW heavy vehicle licence fee schedule. A fee applies to every attempt.
Related Fees: Heavy Vehicle Driving Test $72 ; HVCBA scheme participation fee $36 ; HVCBA replacement log book $11 .
Result Validity: A knowledge test pass is valid for 36 months . Within that window you can use it to obtain a HVCBA Learner Log Book or to book a Heavy Vehicle Driving Test.
Retake Regulations:
Same-day re-sit is allowed. Transport for NSW states that, depending on availability, you may be able to re-sit the test on the same day . There is no mandatory cooling-off period.
Or book for another time. If a same-day slot is not available you simply book another appointment.
You pay the fee again. The $58 test fee applies to each attempt, so a failed attempt costs another $58.
Authoritative Study Literature & Core Curriculum
To master the HVKT, candidates must study three official regulatory publications:
Heavy Vehicle Driver Handbook (Transport for NSW): The heavy-vehicle syllabus — licence classes, fatigue and the work diary, alcohol and drugs, low risk driving, heavy vehicle road rules, knowing the vehicle, dimensions and loading, and penalties. It carries the 100 km/h limit for vehicles over 4.5 t GVM and the speed limiter rules.
Road User Handbook (Transport for NSW): General NSW road rules. Do not underestimate this one — roughly three quarters of the published HVKT question pool is sourced from the Road User Handbook , covering traffic signs, traffic lights and lanes, intersections, pedestrians, bicycle safety, seat belts and negligent driving.
Load Restraint Guide: Performance standards for securing cargo — a restraint system must hold 80% of the load's weight forward, 50% rearward, 50% sideways and 20% upward — plus blocking, lashing and containment methods.
Strategic Exam-Day Advice & Test-Taking Techniques
1. Master Australian Road Terminology: Understand the exact definitions of technical metrics:
Tare Mass: Unladen weight of the empty vehicle including all standard equipment and fuel.
Gross Vehicle Mass (GVM): Maximum permissible loaded weight of a single rigid vehicle.
Gross Combination Mass (GCM): Maximum permissible total loaded weight of a combination vehicle and its trailers.
2. Watch for the 100 km/h Heavy Vehicle Speed Cap: In NSW, the maximum speed limit for any heavy vehicle with a GVM exceeding 4.5 tonnes is 100 km/h , even on rural freeways signposted at 110 km/h.
3. Alcohol limit distinction: The professional limit in NSW is under 0.02 , and it applies to a heavy vehicle with a GVM over 13.9 tonnes , a public passenger vehicle, or a vehicle carrying a dangerous load. Zero is the novice limit and follows the licence (learner, P1, P2). Do not answer "zero" to a question about a fully licensed driver in a heavy vehicle.
4. Pacing and Thoroughness: Read the entire question stem and all four answer options before selecting. Service NSW questions frequently use realistic distractors that describe car road rules rather than heavy vehicle rules.
Operational Transport Scenario
Scenario: A professional HR driver in Dubbo decides to upgrade to an HC licence to operate semi-trailers.
Booking: The driver books online through Service NSW or at a service centre, selects the Combination Heavy Vehicle Knowledge Test , and pays the AUD $58 fee .
Sitting the Test: At the service centre, the driver faces 45 computerised questions. They encounter questions on kingpin lockup, trailer air lines, low-gear descents on Mount Victoria, and load restraint friction.
Outcome & next step: The driver passes. Service NSW issues the HVCBA Learner Log Book and A Guide to Heavy Vehicle Competency Based Assessment . The pass is valid for 36 months , so the driver has three years to complete HVCBA training with an accredited RTO or to book a Heavy Vehicle Driving Test.
Common Exam Traps & Pitfalls
Trap 1: Sitting the wrong test stream. Booking the Rigid test when upgrading from HR to HC. The Combination test is the one required for HC and MC.
Trap 2: Assuming an unofficial pass mark. Because Transport for NSW does not publish a pass mark, treat every question as one you must get right. Do not rely on figures quoted by third-party sites or on rules borrowed from other states and territories.
Trap 3: Rushing Through Options: Many questions have options that look partially correct but miss a crucial regulatory condition (such as supervising driver tenure or vehicle weight thresholds).