Study guide

9.3 Intersections, Give Way, Stop Signs and Roundabouts

NSW Heavy Vehicle Knowledge Test Exam

Track your progress as you read

Finished sections get a check mark.

1 NSW Heavy Vehicle Licensing, Qualifications & Pathways

1.1 Heavy Vehicle Licence Classes and Progression Pathways 1.2 Transmission Restrictions, Assessments, and Driver Qualifications 1.3 HVKT Test Structure, Delivery, and Exam Day Logistics

2 Driver Health, Alcohol and Drugs, and Roadside Testing

2.1 Alcohol Limits, Breath Testing and Drink-Driving Sanctions 2.2 Roadside Drug Testing and Prescribed Medications 2.3 Driver Health, Medical Conditions, and Commercial Fitness Standards

3 Fatigue Management, Heavy Vehicle National Law, and Work Diaries

3.1 Fatigue Science, Warning Signs, and Risk Factors 3.2 Standard Hours Work and Rest Limits 3.3 Basic Fatigue Management (BFM) and Advanced Fatigue Management (AFM) 3.4 National Driver Work Diary Rules and Record-Keeping

4 Low-Risk Driving, Spatial Management, and Maneuvering

4.1 Crash Avoidance Space, Scanning, and Following Distances 4.2 Speed Management, Braking Distances, and Rollover Prevention 4.3 Off-Tracking, Turning Sweeps, and Safe Reversing

5 NSW Heavy Vehicle Road Rules, Signs, and Infrastructure

5.1 "Do Not Overtake Turning Vehicle" Rules and Multi-Lane Turns 5.2 Heavy Vehicle Road Signs, Lane Restrictions, and Low Gear Descents 5.3 Level Crossings, Portable Warning Triangles, and Heavy Vehicle Parking

6 Vehicle Roadworthiness, Inspections, and Braking Systems

6.1 Pre-Departure Daily Safety Inspections 6.2 Air Brake Systems, Pressures, and Low-Air Warnings 6.3 Brake Fade, Auxiliary Retarders, and Non-Synchromesh Transmissions 6.4 Heavy Vehicle Defect Notices and Compliance Inspections

7 Vehicle Mass, Dimension Limits, and General vs Restricted Access

7.1 Statutory Mass Limits and Axle Weight Distribution 7.2 Statutory Dimension Limits and Overhang Regulations 7.3 Restricted Access Vehicles (RAVs), PBS, and Oversize/Overmass Permits

8 Combination Vehicles, Coupling, and Load Restraint

8.1 Coupling and Uncoupling Procedures for Combination Vehicles 8.2 Combination Vehicle Dynamics, Air Lines, and Roll-Away Prevention 8.3 National Load Restraint Guide Standards and Restraint Methods

9 NSW Road Rules: Signs, Signals and Lane Discipline

9.1 Traffic Signs: Regulatory, Warning and Heavy-Vehicle Signs 9.2 Traffic Lights, Arrows and Lane Discipline 9.3 Intersections, Give Way, Stop Signs and Roundabouts

10 Sharing the Road with Vulnerable Road Users

10.1 Pedestrians, Children, School and Rail Crossings 10.2 Bicycle Riders, Motorcyclists, Horses and Sharing the Road 10.3 Seat Belts, Restraints and Getting In and Out Safely

11 Offences, Enforcement and Test Integrity

11.1 Negligent and Dangerous Driving, Overtaking and Road Works 11.2 Speed Limits, Speed Limiters and Speeding Penalties 11.3 Vehicle Monitors, Noise, Emissions and Test Integrity

9.3 Intersections, Give Way, Stop Signs and Roundabouts

Key Takeaways Explain This Topic AI

Turning right at an intersection means giving way to oncoming vehicles going straight ahead, and turning right at a T-intersection from the terminating road means giving way to vehicles approaching from both directions whether they are turning or not.

A GIVE WAY sign requires you to slow down, be ready to stop and give way to all traffic, while a STOP sign requires an actual stop at the line — or, where there is no line, before and as near as possible to the intersection.

A driver turning left or right must give way to pedestrians crossing the road being entered, and must check for traffic on the left and right at all times before entering an intersection.

Entering a roundabout requires giving way to vehicles already in it, and a driver wanting to exit at a later exit must enter from the correct lane rather than cutting across from the left.

Trains cannot stop quickly, so stop signs and flashing lights at railway level crossings must always be obeyed, and you must never enter a crossing when traffic is blocking the far side.

Last updated: August 2026

9.3 Intersections, Give Way, Stop Signs and Roundabouts

Quick Summary / Key Rule: Intersections carry roughly one question in eleven in the published pool, and the give-way rules are tested as diagram questions where you must name which vehicle goes first. Learn the rules as principles, because the diagrams change but the principles do not.

Intersections are also where heavy vehicles do the most damage. A truck entering an intersection it cannot clear, or turning across a gap that was adequate for a car, produces the crash types that dominate heavy-vehicle casualty statistics.

The Core Give-Way Principles

Situation Who gives way

Turning right at an intersection You give way to oncoming vehicles going straight ahead and to oncoming vehicles turning left.

Turning right at a T-intersection from the terminating road You give way to vehicles approaching from both directions , whether they are turning or not.

At a GIVE WAY sign Slow down, be ready to stop , and give way to all traffic.

At a STOP sign Stop at the stop line, then give way to all traffic. Stop even when there is no other traffic .

Turning left or right anywhere Give way to pedestrians crossing the road you are entering .

Two vehicles both facing GIVE WAY signs The one whose path is crossed by the other gives way — read the diagram for who is on whose right.

A knocked-down STOP or GIVE WAY sign It has the same meaning as the sign itself . A sign lying in the grass is still the law.

Where to stop at a STOP sign with no line

If there is no painted stop line, stop before coming to, and as near as possible to, the intersection . Stopping ten metres back "to see better" is not compliance, and in a heavy vehicle it also means you cannot see around the corner anyway.

Scanning

As you approach an intersection you should check for traffic on your left and right at all times before entering — not only when a sign tells you to. In a high cab this is a genuine skill: the A-pillar and the mirror arm can hide an entire small car at the angle at which it will hit you.

Turning in a Heavy Vehicle

Turning is where the general road rules and the heavy vehicle rules meet.

Left turns: you must use your left indicator at all times when turning left, even from a lane marked left-turn-only.

Right turns: made from the far right lane or a lane with a right-turn arrow. Indicate right for the whole manoeuvre.

The long-vehicle turn: you may turn from the lane next to the left-hand lane when driving a vehicle over 7.5 metres long . This is the legal basis for the wide left turn a truck must make, and it is why "Do Not Overtake Turning Vehicle" signage exists.

Right turn from a one-way street: a long vehicle displaying a Do Not Overtake Turning Vehicle sign on the rear may turn right from a lane other than the far right lane where necessary, because the rear of the combination will cut into the turn. A vehicle not displaying that sign must turn within the lanes.

Caution

Trailer swing and off-tracking mean the rear wheels of a combination follow a tighter arc than the steer axle. A driver who watches only their mirrors on the turning side will not see the vehicle that the trailer is about to sweep into on the other side.

Roundabouts

Roundabouts are one-way circulating carriageways, and the entry rule is simple: give way to any vehicle already in the roundabout . Beyond that:

Enter from the correct lane. A vehicle wanting to turn right and exit at the third exit must enter the roundabout from the right lane , not from the left. Entering from the wrong lane and cutting across is one of the diagram traps in the pool.

Indicate. Signal right when turning right, left when turning left, and always signal left as you leave the roundabout if it is practicable.

Long vehicles may straddle lanes. A vehicle over 7.5 metres long may use more than one lane in a roundabout if it cannot physically stay within one, provided it displays the appropriate signage and gives way properly.

Railway Level Crossings at Intersections

Approaching a crossing with a STOP sign : stop at all times and proceed when safe.

Approaching a crossing with a GIVE WAY sign or a warning sign : slow down, look both ways for trains, and be prepared to stop.

If boom gates are down or signals are flashing : you may only begin to cross when the gate is up and the lights have stopped flashing .

Even when the signal shows nothing: slow down, be ready to stop and give way if a train is coming.

Never enter when traffic is blocking the other side. Stop signs and flashing lights at railway crossings must always be obeyed because trains are fast, heavy and cannot stop quickly — a freight train needs well over a kilometre to stop, and it is not going to be the one that gives way.

Enforcement at Intersections

Red light cameras photograph vehicles that enter the intersection after the lights have turned red. There is no discretion built into the camera and no "I was nearly through" defence.

Police directing traffic override the signals: you must always follow any instruction they give you.

Traffic controllers at roadworks have the same authority — if a controller displays a stop sign, you stop your vehicle and follow their directions.

Worked Scenario: The B-Double at a Congested City Intersection

A driver in a 26 metre B-double approaches a signalised city intersection on a green light. Traffic beyond the intersection is queued and moving slowly.

The temptation: the light is green and there is a car-length of space on the far side.

The measurement: the combination is 26 metres long. A car-length of far-side space guarantees the rear trailer will be sitting across the intersection when the light changes.

The rule: you must wait until there is room for your vehicle on the far side before entering.

The outcome of getting it wrong: the combination blocks the cross traffic through the whole of their green phase, and the driver is liable for obstructing the intersection. If the blocked lane is a light rail alignment or a level crossing, the consequences escalate from a fine to a collision.

The correct call is to hold behind the stop line through the green phase and go on the next one. Losing ninety seconds is the cheapest option available.