Study guide

9.1 Traffic Signs: Regulatory, Warning and Heavy-Vehicle Signs

NSW Heavy Vehicle Knowledge Test Exam

Track your progress as you read

Finished sections get a check mark.

1 NSW Heavy Vehicle Licensing, Qualifications & Pathways

1.1 Heavy Vehicle Licence Classes and Progression Pathways 1.2 Transmission Restrictions, Assessments, and Driver Qualifications 1.3 HVKT Test Structure, Delivery, and Exam Day Logistics

2 Driver Health, Alcohol and Drugs, and Roadside Testing

2.1 Alcohol Limits, Breath Testing and Drink-Driving Sanctions 2.2 Roadside Drug Testing and Prescribed Medications 2.3 Driver Health, Medical Conditions, and Commercial Fitness Standards

3 Fatigue Management, Heavy Vehicle National Law, and Work Diaries

3.1 Fatigue Science, Warning Signs, and Risk Factors 3.2 Standard Hours Work and Rest Limits 3.3 Basic Fatigue Management (BFM) and Advanced Fatigue Management (AFM) 3.4 National Driver Work Diary Rules and Record-Keeping

4 Low-Risk Driving, Spatial Management, and Maneuvering

4.1 Crash Avoidance Space, Scanning, and Following Distances 4.2 Speed Management, Braking Distances, and Rollover Prevention 4.3 Off-Tracking, Turning Sweeps, and Safe Reversing

5 NSW Heavy Vehicle Road Rules, Signs, and Infrastructure

5.1 "Do Not Overtake Turning Vehicle" Rules and Multi-Lane Turns 5.2 Heavy Vehicle Road Signs, Lane Restrictions, and Low Gear Descents 5.3 Level Crossings, Portable Warning Triangles, and Heavy Vehicle Parking

6 Vehicle Roadworthiness, Inspections, and Braking Systems

6.1 Pre-Departure Daily Safety Inspections 6.2 Air Brake Systems, Pressures, and Low-Air Warnings 6.3 Brake Fade, Auxiliary Retarders, and Non-Synchromesh Transmissions 6.4 Heavy Vehicle Defect Notices and Compliance Inspections

7 Vehicle Mass, Dimension Limits, and General vs Restricted Access

7.1 Statutory Mass Limits and Axle Weight Distribution 7.2 Statutory Dimension Limits and Overhang Regulations 7.3 Restricted Access Vehicles (RAVs), PBS, and Oversize/Overmass Permits

8 Combination Vehicles, Coupling, and Load Restraint

8.1 Coupling and Uncoupling Procedures for Combination Vehicles 8.2 Combination Vehicle Dynamics, Air Lines, and Roll-Away Prevention 8.3 National Load Restraint Guide Standards and Restraint Methods

9 NSW Road Rules: Signs, Signals and Lane Discipline

9.1 Traffic Signs: Regulatory, Warning and Heavy-Vehicle Signs 9.2 Traffic Lights, Arrows and Lane Discipline 9.3 Intersections, Give Way, Stop Signs and Roundabouts

10 Sharing the Road with Vulnerable Road Users

10.1 Pedestrians, Children, School and Rail Crossings 10.2 Bicycle Riders, Motorcyclists, Horses and Sharing the Road 10.3 Seat Belts, Restraints and Getting In and Out Safely

11 Offences, Enforcement and Test Integrity

11.1 Negligent and Dangerous Driving, Overtaking and Road Works 11.2 Speed Limits, Speed Limiters and Speeding Penalties 11.3 Vehicle Monitors, Noise, Emissions and Test Integrity

9.1 Traffic Signs: Regulatory, Warning and Heavy-Vehicle Signs

Key Takeaways Explain This Topic AI

Traffic signs are about one in seven questions in the published HVKT pool, and almost all of them are sourced from the Road User Handbook rather than the Heavy Vehicle Driver Handbook.

Regulatory signs state the law and are usually rectangular black-on-white or a red circle; warning signs are yellow diamonds and the correct answer to them almost always begins with 'slow down and be prepared to'.

A sign showing a truck or bus symbol with a speed number is a regulatory sign for truck and bus drivers that must be obeyed, even where cars around you may lawfully travel faster.

A low gear sign for heavy vehicles means the gear you choose must be able to control the vehicle's speed on the descent, and a clearance sign means you may only proceed if your loaded vehicle is less than the height shown.

A STOP sign requires a full stop even when there is no other traffic, and a STOP or GIVE WAY sign that has been knocked down still has exactly the same legal meaning as the standing sign.

Last updated: August 2026

9.1 Traffic Signs: Regulatory, Warning and Heavy-Vehicle Signs

Quick Summary / Key Rule: Traffic signs are the single largest identifiable block in the published Heavy Vehicle Knowledge Test question pool after general knowledge — roughly one in seven questions . Almost all of them come from the Road User Handbook , not the Heavy Vehicle Driver Handbook. Candidates who study only truck-specific material walk into the test having never revised the material that carries the most questions.

Signs fall into two legal categories, and the distinction decides how you answer. A regulatory sign states a law: disobeying it is an offence. A warning sign tells you a hazard is ahead: it does not by itself impose a speed or a manoeuvre, but ignoring it and then losing control is negligent driving. A large share of the wrong answers on sign questions come from candidates treating a warning sign as if it were a rule, or the reverse.

Regulatory Signs: These Are the Law

Regulatory signs are usually rectangular, black on white , or a red circle/slash for a prohibition.

Sign What it legally requires

STOP Stop at the stop line and give way to all traffic . If there is no painted stop line, stop before and as near as possible to the intersection. You must stop even when there is no other traffic .

GIVE WAY Slow down, be ready to stop , and give way to all traffic.

Speed limit (e.g. 60) You must not exceed that speed. Note the sign is a maximum , never a target.

NO RIGHT TURN / NO LEFT TURN You must not turn in that direction.

ONE WAY You may travel only in the direction of the arrow.

KEEP LEFT / left lane unless overtaking You must stay in or move to the left lane unless you are overtaking, turning right, or the lane is obstructed.

NO STOPPING You must not stop your vehicle at the kerb during the times shown.

CLEARWAY (broken yellow edge line) You must not stop during clearway hours, for any reason including a delivery.

T2 / T3 transit lane Only vehicles carrying the stated minimum number of occupants may use the lane.

Trucks lane Trucks more than 4.5 tonnes GVM must use this lane.

No trucks Vehicles over the stated GVM must not enter.

Mobility parking (wheelchair symbol) Only a vehicle carrying a person with disability and displaying a current mobility parking authority may park in that space.

Heavy-vehicle regulatory signs worth memorising

Truck and bus speed signs. A sign showing a truck or bus symbol with a number is a regulatory sign for truck and bus drivers which must be obeyed . If it shows 40, a truck or bus must not exceed 40 km/h even though cars around it may lawfully do 80. This catches candidates who assume the truck symbol makes it advisory.

Low gear signs. A sign directing heavy vehicles to use low gear on a descent means the gear you choose must be able to control the vehicle's speed on the descent . It is not a suggestion to "consider" a lower gear; it is a requirement that your gear selection actually does the braking work.

Bridge and tunnel clearance signs. A clearance sign on the approach to a bridge or tunnel means you may only proceed if your loaded vehicle is less than the height shown . Your height is the height of the vehicle plus its load , and the responsibility sits with you, not the consignor.

Load limit signs. These restrict a bridge or road to vehicles under a stated mass. Exceeding a posted load limit is an offence and, on a weakened bridge, a structural risk.

Warning Signs: Diamond, Yellow, Advisory

Warning signs are yellow diamonds with black symbols . They tell you something is ahead and that you should slow down and be prepared. In a heavy vehicle their significance is multiplied, because your stopping distance and your rollover threshold are both far worse than a car's.

Warning sign What is ahead The heavy vehicle consequence

Curve / sharp bend, with advisory speed The maximum safe speed around the curve An advisory curve speed is calculated for a car. A high-centre-of-gravity truck can roll below the advisory speed.

Winding road A series of bends Select your gear before the first bend, not between them.

Steep descent A steep down-grade Choose your gear at the top; a heavy vehicle cannot change down safely once it is running away.

Crest / hill You are approaching the top of a hill Keep left and slow down — you cannot see oncoming traffic and must not overtake.

Dip / hump A sharp depression or hump in the road Suspension travel and load shift; a long combination can ground out.

Road narrows / divided road ends Two-way traffic resumes A 2.5 m wide vehicle has very little lateral margin.

One-lane bridge (sign on or near a bridge) The bridge is too narrow for two vehicles to pass Slow down and be prepared to give way to vehicles travelling in the opposite direction. This is the published answer — the sign does not require you to stop, and it is not about pedestrians or overtaking.

Narrow (two-vehicle) bridge The bridge has only just enough room for two vehicles Slow down and pay extra attention. Do not sound your horn to warn the other driver, and do not hold your speed.

Slippery when wet Reduced grip in the wet Braking distance can double; slow down before the surface, not on it.

Trucks entering Trucks joining from a side road or quarry Expect slow, heavy vehicles crossing your path.

Children / school crossing ahead Children may be crossing Slow down and be ready to make a safe stop.

Pedestrian crossing ahead A marked crossing is coming You must be able to stop, not just slow.

Animals (kangaroo, cattle) Animals on or near the road Slow down and give them plenty of room; do not swerve at speed in a laden truck.

Bicycle Watch for bicycle riders along the roadway You must leave a minimum passing distance.

Crossroads / T-intersection ahead An intersection is approaching Reduce speed and watch for vehicles entering.

Traffic signals ahead Lights are coming, possibly after a crest Be ready to stop if the lights change.

Roadworks / workers ahead / traffic controller ahead A work zone Slow to the posted work-zone limit and follow any controller.

Tip

The consistent correct answer to "what does this warning sign mean" in the official pool begins with "slow down and…" . Warning signs never grant a right of way and never authorise a manoeuvre. If an option says a warning sign lets you do something, it is wrong.

Railway Level Crossing Signs

Level crossings get their own family of signs, and heavy vehicles are the vehicles most likely to be caught on the tracks.

Crossing with a STOP sign: stop at all times, then proceed when safe.

Crossing with a GIVE WAY sign: slow down, look both ways for trains, and be ready to stop and give way to a train.

Flashing signals: stop until the red lights stop flashing, then drive on if it is safe.

Boom gates down: you may only begin to cross when the gate is up and the lights have stopped flashing .

No signals at all: slow down, be ready to stop, and give way if a train is coming.

A rule that only matters to heavy vehicle drivers: even where the crossing is clear and the signals are silent, do not enter if traffic on the far side is blocking your exit . A 26 metre B-double needs the entire crossing plus its own length of clear road on the other side before it should move.

Working the Sign Questions in the Test

Read the shape and colour first. Red or black-on-white rectangle means it is a law. Yellow diamond means it is a hazard warning.

Ask who the sign is addressed to. A truck or bus symbol narrows the sign to heavy vehicles, and it is usually a regulatory sign — a "must", not a "should".

Reject options that give you permission. Warning-sign answers do not authorise anything.

Reject options that soften a regulatory sign. A STOP sign requires a full stop even when there is no other traffic , and a knocked-down STOP or GIVE WAY sign still has the same meaning as the sign itself .